Association between ridge morphology and complexity of implant placement planning in the posterior mandible.

STATEMENT OF PROBLEM: Uncertainties regarding the 3D ridge morphology of the posterior mandible can greatly increase the risk of surgical complications during dental implant placement. By using cone beam computed tomography (CBCT) imaging and a computer-guided implant treatment software program before any invasive procedure, it is possible to assess ridge morphology and understand the surgical complexity and risk level. PURPOSE: The purpose of this radiological clinical study was to evaluate a large series of CBCT images to evaluate ridge shape variations along posterior mandibular edentulous regions and to clarify their associations with the level of implant planning complexity. MATERIAL AND METHODS: One hundred and twenty CBCT files were analyzed retrospectively for a total 240 hemimandibular sites. Images of each edentulous region of the mandibular first and second premolar and first and second molar sites were evaluated in the sagittal plane. Ridge morphology and implant planning complexity per site were assessed. Categorical variables were presented as number of events and percentages. The chi-square test was used to compare the categorical variables (P=.05). RESULTS: Of 491 partially edentulous mandibular sites, 235 were on the right, and 256 were on the left. Forty-two sites had a distal adjacent tooth, while 266 sites had no distal adjacent tooth. The sagittal bone sections demonstrated oblique (40.53%), straight (31.77%), S-shape (24.24%), hourglass (2.44%), and basal bone (1.02%) ridge morphologies. Implant complexity was deemed straightforward in 66.19% of sites, while 31.6% were identified as advanced and 2.54% as complex. When ridge morphology was evaluated from straight to basal-round bone shape, the implant complexity followed the same trend of change from a straightforward to complex procedure (P=.001) for edentulous second and first molar regions. No significant differences were noted at edentulous second premolar sites (P=.063). The missing second molar sites with oblique morphology were predicted to have 60.9% straightforward complexity, and first molar sites with oblique morphology had 55.8% straightforward implant complexity. Second premolars with straight ridge morphology had 71.7% straightforward complexity, whereas first premolars with the same shape had 92.5% straightforward implant complexity. CONCLUSIONS: Careful evaluation of sagittal CBCT images can provide significant clinical information regarding ridge shape and anticipated surgical complexity before and at the time of implant placement. Surgical complexity is greatest at the most posterior mandibular edentulous sites, and extra attention and caution should be exercised during the surgical planning phases of implant surgery.

Surface roughness of enamel and root surface after scaling, root planning and polishing procedures: An in-vitro study.

OBJECTIVES: The aim of this study was to evaluate enamel and root surface roughness on exracted human teeth by using different tecniques (ultrasonic scaler, hand instruments, polishing paste, pumice and air powder system). MATERIALS AND METHODS: A total of 200 samples were divided into two groups (enamel and root) randomly with 100 samples for each enamel and root groups. The groups were divided into 5 subgroups: Group I: ultrasonic scaler, group II: hand instruments, group III: polishing paste, group IV: pumice, group V: air-powder. Surface roughness (Ra) was assessed with Mitutoyo SJ-410 device. The one-way analysis of variance (ANOVA) test along with the Tukey test was used for statistical analysis. P values less than 0.05 were considered statistically significant. RESULTS: The use of ultrasonic scalers caused the highest roughness increase on the enamel surface (0.935 â€‹± â€‹0.010), whereas the use of pumice was the least (0.896 â€‹± â€‹0.018) (p â€‹< â€‹0.05). There was a significant difference between ultrasonic scalers and all the groups (hand instruments, polishing paste, pumice and air powder system) on enamel surface (p â€‹< â€‹0.05). Maximum surface roughness increase was observed in the ultrasonic scalers on root surface. There was a significant difference between ultrasonic scalers and polishing paste, pumice and air powder on root surface, respectively (p â€‹< â€‹0.05). CONCLUSION: The use of ultrasonic scalers cause more rough enamel and root surfaces than hand instrumentation and polishing tecniques. CLINICAL RELEVANCE: Uneven surfaces adversely affect the intended periodontal healing by creating a retention area of microbial dental plaque.

Topographic relationship between maxillary sinus and roots of posterior teeth: a cone beam tomographic analysis.

PURPOSE: The objective of the research was to determine the relationship between root apices and maxillary sinus wall, and to analyze pulpoapical conditions of 2nd premolars, 1st molars, 2nd molars, 3rd molars using cone beam computerized tomography (CBCT). MATERIALS AND METHODS: This study was conducted on a retrospective manner of CBCT images of 1000 maxillary sinus with 500 subjects, who visited the Department of Dento-Maxillofacial Radiology. The association of each teeth with sinus floor and pulpoapical status were categorized. The association among gender, age, lateralization of sinus cavity were evaluated. RESULTS: A total of 602 second premolars, 500 first molars, 623 second molars, 347 third molars were evaluated. There were no significant differences between pulpoapical condition of teeth and gender or left and right sides (p=0.065, p=0.072). There were significant associations between pulpoapical condition of all teeth and age (p=0.023), and the relationship of each root with maxillary sinus and age (p=0.037). There was significant association between vertical position and right/left sides in second and third molars (p=0.033). CONCLUSION: Age seems to have relationship with periapical condition of teeth, and the association of root with the sinus cavity.

Mineral Trioxide Aggregate Applications in Endodontics: A Review.

A current topic in dentistry concerns the biocompatibility of the materials, and in particular, conservative dentistry and endodontics ones. The mineral trioxide aggregate (MTA) is a dental material with biocompatibility properties to oral and dental tissues. MTA was developed for dental root repair in endodontic treatment and it is formulated from commercial Portland cement, combined with bismuth oxide powder for radiopacity. MTA is used for creating apical plugs during apexification, repairing root perforations during root canal therapy, treating internal root resorption, and pulp capping. The objective of this article is to investigate MTA features from a clinical point of view, even compared with other biomaterials. All the clinical data regarding this dental material will be evaluated in this review article. Data obtained from the analysis of the past 10 years' literature highlighted 19 articles in which the MTA clinical aspects could be recorded. The results obtained in this article are an important step to demonstrate the safety and predictability of oral rehabilitations with these biomaterials and to promote a line to improve their properties in the future.

In-depth morphological evaluation of tooth anatomic lengths with root canal configurations using cone beam computed tomography in North American population.

OBJECTIVE: This study aimed to assess the association between tooth size and root canal morphology by using CBCT analysis. METHODOLOGY: In this retrospective study, tooth anatomic lengths (crown and root lengths, buccolingual and mesiodistal dimensions) of 384 patients were assessed and correlated with Vertucci's root canal morphology classification. Data was analyzed for gender-related differences using the independent sample t-test, ANOVA, and the Pearson's correlation for a possible relation between anatomic lengths and canal morphology. RESULTS: The maxillary first and second premolars showed a greater predilection for Type IV and II variants, respectively, while the mandibular first premolar showed a greater predilection for Type II canal system. The root canal system of the mandibular second premolar showed maximal diversity (47% Type I, 30% Type II, and 20% Type III). The dimensions were greater in men regardless of tooth type. The most significant relation (p<0.05) between the anatomic size and canal morphology was observed in the maxillary first premolars, followed by the mandibular canines (buccolingual dimension) and the lower second premolars (crown length). Negative correlations existed between the crown length and the patient's age for the anterior teeth and mandibular second premolar (r=-0.2, p<0.01). CONCLUSIONS: The most common canal formation for anterior teeth was the Type I. The anatomic lengths had the strongest influence on the canal configuration of the maxillary first premolar, with Type IV being the most common root canal system. The mandibular second premolars showed maximal diversity in the canal classification terms and had a significant correlation with their crown lengths. CLINICAL RELEVANCE: The complex relationship between the canal morphology and anatomic tooth sizes need meticulous awareness and recognition during endodontic procedures, in conjunction with the demographic variabilities.

In-depth morphological evaluation of tooth anatomic lengths with root canal configurations using cone beam computed tomography in North American population

Abstract Objective This study aimed to assess the association between tooth size and root canal morphology by using CBCT analysis. Methodology In this retrospective study, tooth anatomic lengths (crown and root lengths, buccolingual and mesiodistal dimensions) of 384 patients were assessed and correlated with Vertucci's root canal morphology classification. Data was analyzed for gender-related differences using the independent sample t-test, ANOVA, and the Pearson's correlation for a possible relation between anatomic lengths and canal morphology. Results The maxillary first and second premolars showed a greater predilection for Type IV and II variants, respectively, while the mandibular first premolar showed a greater predilection for Type II canal system. The root canal system of the mandibular second premolar showed maximal diversity (47% Type I, 30% Type II, and 20% Type III). The dimensions were greater in men regardless of tooth type. The most significant relation (p<0.05) between the anatomic size and canal morphology was observed in the maxillary first premolars, followed by the mandibular canines (buccolingual dimension) and the lower second premolars (crown length). Negative correlations existed between the crown length and the patient's age for the anterior teeth and mandibular second premolar (r=−0.2, p<0.01). Conclusions The most common canal formation for anterior teeth was the Type I. The anatomic lengths had the strongest influence on the canal configuration of the maxillary first premolar, with Type IV being the most common root canal system. The mandibular second premolars showed maximal diversity in the canal classification terms and had a significant correlation with their crown lengths. Clinical Relevance The complex relationship between the canal morphology and anatomic tooth sizes need meticulous awareness and recognition during endodontic procedures, in conjunction with the demographic variabilities.

Maxillary Sinus and Surrounding Bone Anatomy With Cone Beam Computed Tomography After Multiple Teeth Loss: A Retrospective Multicenter Clinical Study.

PURPOSE: The aim of this multicenter study was to examine the residual alveolar bone anatomy and sinus mucosa pattern at maxillary sinus regions in multiple teeth loss. MATERIALS AND METHODS: This study was conducted with cone beam computed tomography images of 518 patients (267 females and 251 males) with multiple posterior maxillary teeth loss. Variables associated with sinus membrane (SM), sinus dimensions, ostium, septa, sinus neighborhood, alveolar bone height and ridge width, posterior superior alveolar artery, and adjacent roots were evaluated. RESULTS: No (58.2%) or flat (19.3%) thickening morphology was detected at most of the SMs. Membrane thickening and mucosal-like morphology was more prevalent for male patients (P = 0.005). The mean sinus width was relatively low (3.64 ± 3.33 mm) at the 5-mm level and showed an expected increase toward upper levels. Most of the sinus spaces were dimensionally average (39.5%) or wide (44.7%), and no effect of gender was observed in terms of sinus dimensions (P > 0.05). CONCLUSION: Multiple teeth loss plays a role in creating an imaginary sinus anatomy constituted of a relatively narrow space compared with single-tooth loss cases, from 3.6-mm mean coronal width to 11.3 mm in the apical portion.

Radio-Morphometric Evaluation of Greater Palatine Canal and Pterygopalatine Fossa Component: Maxillary Anesthetic Implications.

This is a retrospective analytical cross-sectional study involving 131 cone-beam computed tomography (CBCT) scans of adult (18-99 years) that assessed greater palatine canal (GPC) attributes (length, curvature angle, diameter of curvature) and the type of the trajectory of GPC-pterygopalatine fossa (PPF) component. The GPC is an important landmark that connects the oral cavity and PPF. It contains greater and lesser palatine nerves, along-with descending palatine artery and vein by extending from the inferior part of the PPF to the hard palate. The GPC acts as a pathway for infiltration of local anesthesia. The inferior orbital fissure (IOF) is in close proximity to these vital anatomic structures and hence accurate identification of its location during regional block anesthesia is crucial. This is one of the very few studies investigating these important structures on CBCT scans highlighting the importance of preoperative scans for the anatomic determination. The images were analyzed for the lengths and anatomic paths of the right and left GPC-PPF in sagittal plane. The diameters of the upper (higher bony aspect of PPF) and lower openings (GPC opening) displayed statistically significant differences in the comparison between males and females (P < 0.05). Overestimation or underestimation of the GPC length can cause a lack of anesthesia and undesirable diffusion of the anesthetic solution into the orbit thorough the IOF causing diplopia, or into the cranial cavity. A thorough understanding of GPC length and pathway types is obligatory for proper anesthetic administration and performing any maxillofacial procedures.

Assessment of morphological and anatomical characteristics of mental foramen using cone beam computed tomography.

PURPOSE: To determine the shape, position, vertical height, surrounding bone characteristics, and opening angle of mental foramen (MF) using dental cone beam computed tomography (CBCT). METHODS: A retrospective study was performed on 663 patients. CBCT records analyzed for the shape, position, and surrounding bone measurements of the MF using Simplant 3D software (Hasselt, Belgium). Opening angle of MF was also assessed. Kruskal-Wallis and Mann-Whitney U tests were employed to test significant differences between parameters, genders and ages. RESULTS: All mental foramina were visualized. Regarding location, 49.2% of the MFs were located between first and second premolars, 7.7 distal and 39.7% coincident to the apex of the mandibular second premolar. The mean MF opening angle was 45.4° on the right side, and 45.9° on the left. There were no statistically differences between gender groups with regard to the opening angle degrees. CONCLUSIONS: This study may provide useful information about variations in the position, shape and size, angle of mental foramen, which may help the practitioners to perform safer mental nerve blocks and surgical procedures.

The effect of demographic and disease variables on Schneiderian membrane thickness and appearance.

OBJECTIVES: The purpose of this study was to evaluate the prevalence of sinus mucosal thickening (MT) and mucosal appearance (MA) in a patient population as detected with cone beam computed tomography (CBCT) and to determine the effects of various disease and demographic factors on MT and MA. STUDY DESIGN: The retrospective study consisted of CBCT images of 1000 maxillary arches in 500 patients. The arches were divided into 3 groups (atrophic, partially atrophic, and nonatrophic) according to the type of the maxillary dental crest. The CBCT scans were assessed to detect the prevalence of maxillary sinus MT and MA. χ2 analysis was used to determine the significance of association of periodontal bone loss (PBL), periapical (PA) status, alveolar crest type, age, and gender on sinus MT and MA. RESULTS: MT was significantly associated with PBL (P = .004), PA status (P = .001), and gender (P < .01). MA was significantly associated with PBL (P = .038), PA status (P = .009), and gender (P < .020). There were no significant associations between age or crest type and either MT or MA. CONCLUSIONS: Periodontal bone loss, PA lesions, and gender may have an association with MT of the maxillary sinus.

Accessory Mental/Buccal Foramina: Case Report and Review of Literature.

The presence of the additional mental foramen of the mandible is considered to be a rare anatomical occurrence. Only a few cases have been reported. In these cases, only 1 foramen is called the mental foramen and the others are termed either accessory mental foramen or accessory buccal foramen. The purpose of this article was to present a case with computed tomography images and suggest that preoperative cone beam computed tomography should be performed to detect any anatomical variation. In addition, we present all reasonable terminology to ease the communication through unique terminology among surgeons.