Chelation-assisted assembly of multidentate colloidal nanoparticles into metal-organic nanoparticles.

We propose a chelation-assisted assembly of multidentate CNs into metal-organic nanoparticles (MONs). Multidentate CNs functionalized with coordination sites participate equally as organic linkers in MON construction, which is driven by chelation between metal ions and coordination sites. MONs assembled from Au nanoparticles display particle number- and size-dependent optical properties. In addition, the resulting CN-assembled MONs give evidence that assembly was dictated by the multidentate surface ligand rather than the size, shape or material of CNs. With this chelation-assisted strategy, it is possible to control the number of assembled CNs and build the connections between them.

Control of the Speed of a Light-Induced Spin Transition through Mesoscale Core-Shell Architecture.

The rate of the light-induced spin transition in a coordination polymer network solid dramatically increases when included as the core in mesoscale core-shell particles. A series of photomagnetic coordination polymer core-shell heterostructures, based on the light-switchable Rb aCo b[Fe(CN)6] c· mH2O (RbCoFe-PBA) as core with the isostructural K jNi k[Cr(CN)6] l· nH2O (KNiCr-PBA) as shell, are studied using temperature-dependent powder X-ray diffraction and SQUID magnetometry. The core RbCoFe-PBA exhibits a charge transfer-induced spin transition (CTIST), which can be thermally and optically induced. When coupled to the shell, the rate of the optically induced transition from low spin to high spin increases. Isothermal relaxation from the optically induced high spin state of the core back to the low spin state and activation energies associated with the transition between these states were measured. The presence of a shell decreases the activation energy, which is associated with the elastic properties of the core. Numerical simulations using an electro-elastic model for the spin transition in core-shell particles supports the findings, demonstrating how coupling of the core to the shell changes the elastic properties of the system. The ability to tune the rate of optically induced magnetic and structural phase transitions through control of mesoscale architecture presents a new approach to the development of photoswitchable materials with tailored properties.

Synergistic photomagnetic effects in coordination polymer heterostructure particles of Hofmann-like Fe(4-phenylpyridine)2[Ni(CN)4]·0.5H2O and K0.4Ni[Cr(CN)6]0.8·nH2O.

New nanometer scale heterostructure particles of the two-dimensional Hofmann-like Fe(ii) spin-crossover network, Fe(phpy)2[Ni(CN)4]·0.5H2O {phpy = 4-phenylpyridine}, and the Prussian blue analogue K0.4Ni1.0[Cr(CN)6]0.8·nH2O (NiCr-PBA) have been developed, exhibiting synergistic photomagnetic effects, whereby the LIESST (light-induced electron spin-state trapping) effect in the Hofmann-like material induces a magnetization change in the NiCr-PBA. A variety of microscopic and spectroscopic techniques demonstrate the heterogeneous growth of the NiCr-PBA on the Hofmann seed particles and show the Hofmann compound retains its thermal and photoinduced spin transition properties in the heterostructure. The photoinduced magnetization change in the NiCr-PBA network arises from coupling of the two lattices despite dissimilar structure types. Isothermal magnetization minor hysteresis loop studies at 5 K show light absorption leads to changes in the local anisotropy of NiCr-PBA magnetic domains, providing direct evidence for a general magnetomechanical mechanism of light-switchable magnetism in coordination polymer heterostructures combining a photoactive material with a magnet.

Assembly of Double-Hydrophilic Block Copolymers Triggered by Gadolinium Ions: New Colloidal MRI Contrast Agents.

Mixing double-hydrophilic block copolymers containing a poly(acrylic acid) block with gadolinium ions in water leads to the spontaneous formation of polymeric nanoparticles. With an average diameter near 20 nm, the nanoparticles are exceptionally stable, even after dilution and over a large range of pH and ionic strength. High magnetic relaxivities were measured in vitro for these biocompatible colloids, and in vivo magnetic resonance imaging on rats demonstrates the potential utility of such polymeric assemblies.

Antiferromagnetic ordering in MnF(salen).

Antiferromagnetic order at [Formula: see text] K has been identified in Mn(III)F(salen), salen = H14C16N2O2, an S = 2 linear-chain system. Using single crystals, specific heat studies performed in magnetic fields up to 9 T revealed the presence of a field-independent cusp at the same temperature where (1)H NMR studies conducted at 42 MHz observed dramatic changes in the spin-lattice relaxation time, T 1, and in the linewidths. Low-field (less than 0.1 T) magnetic susceptibility studies of single crystals and randomly-arranged microcrystalline samples reveal subtle features associated with the transition.

Comparison of Zirconium Phosphonate-Modified Surfaces for Immobilizing Phosphopeptides and Phosphate-Tagged Proteins.

Different routes for preparing zirconium phosphonate-modified surfaces for immobilizing biomolecular probes are compared. Two chemical-modification approaches were explored to form self-assembled monolayers on commercially available primary amine-functionalized slides, and the resulting surfaces were compared to well-characterized zirconium phosphonate monolayer-modified supports prepared using Langmuir-Blodgett methods. When using POCl3 as the amine phosphorylating agent followed by treatment with zirconyl chloride, the result was not a zirconium-phosphonate monolayer, as commonly assumed in the literature, but rather the process gives adsorbed zirconium oxide/hydroxide species and to a lower extent adsorbed zirconium phosphate and/or phosphonate. Reactions giving rise to these products were modeled in homogeneous-phase studies. Nevertheless, each of the three modified surfaces effectively immobilized phosphopeptides and phosphopeptide tags fused to an affinity protein. Unexpectedly, the zirconium oxide/hydroxide modified surface, formed by treating the amine-coated slides with POCl3/Zr(4+), afforded better immobilization of the peptides and proteins and efficient capture of their targets.

Hyperbranched polymer mediated size-controlled synthesis of gadolinium phosphate nanoparticles: colloidal properties and particle size-dependence on MRI relaxivity.

Hyperbranched polymers based on the poly(amidoamine), HyPAM, were used to synthesize gadolinium phosphate nanowires under mild conditions. Control of the average particle size was obtained by adjusting polymer concentration. Proton relaxivity measurements reveal an optimum particle size, reaching relaxivity values as high as 55 ± 9 mM(-1) s(-1) for r1 and 67 ± 11 mM(-1) s(-1) for r2. The colloidal stability of these hybrid systems were optimized through the use of functionalized core-shell polymers containing PEG segments and C18-PEG segments, structures which also offer the possibility of imparting additional function into the polymer-particle hybrids.

Direct Observation of Short-Range Structural Coherence During a Charge Transfer Induced Spin Transition in a CoFe Prussian Blue Analogue by Transmission Electron Microscopy.

The local structure within the Co-Fe atomic array of the photoswitchable coordination polymer magnet, K0.3Co[Fe(CN)6]0.77·nH2O, is directly observed during charge transfer induced spin transition (CTIST), a solid-solid phase change, using high-resolution transmission electron microscopy (HRTEM). Along with the low-spin (LS) or thermally quenched high-spin (HS) states normally observed in CTIST solids at low temperature, slow cooling of K0.3Co[Fe(CN)6]0.77·nH2O results in an intermediate phase containing both HS and LS domains with short coherence length. By mapping individual metal-metal distances, the nanometer-scale HS domains are directly visualized within the LS array. Temperature-dependent analyses allow monitoring of HS domain coarsening along the warming branch of the CTIST, providing direct visualization of the elastic process and insight into the mechanism of phase propagation. Normally sensitive to electron beam damage, the low-temperature TEM measurements of the porous coordination polymer are enabled by using appropriate ionic liquids instead of usual conductive thin-film coatings, an approach that should find general utility in related classes of materials.

One-step synthesis of gradient gadolinium ironhexacyanoferrate nanoparticles: a new particle design easily combining MRI contrast and photothermal therapy.

A one-step synthesis of Prussian blue nanoparticles possessing a concentration gradient of Gd3+ counterions, g-Gd-PB, has been developed, and the potential for the particles to perform as both MRI positive contrast agents and photothermal therapy agents is demonstrated. The synthesis of potassium/gadolinium ironhexacyanoferrate is performed under increasing concentration of Gd3+ ions forming particles with a higher concentration of gadolinium toward the outer layers. The proton relaxivity (r1) measured for the particles is 12.3 mM(-1) s(-1), and T1 weighted images of phantoms containing the particles show their potential as MRI contrast agents. In addition, the Prussian blue host can rapidly and efficiently convert energy from near-IR light into thermal energy, allowing g-Gd-PB to be used as a photothermal therapy agent. The photothermal properties are demonstrated by measuring temperature changes of particle suspensions under irradiation and by photothermal ablation of CCRF-CEM cancer cells.

Design and optimization of a phosphopeptide anchor for specific immobilization of a capture protein on zirconium phosphonate modified supports.

The attachment of affinity proteins onto zirconium phosphonate coated glass slides was investigated by fusing a short phosphorylated peptide sequence at one extremity to enable selective bonding to the active surface via the formation of zirconium phosphate coordinate covalent bonds. In a model study, the binding of short peptides containing zero to four phosphorylated serine units and a biotin end-group was assessed by surface plasmon resonance-enhanced ellipsometry (SPREE) as well as in a microarray format using fluorescence detection of AlexaFluor 647-labeled streptavidin. Significant binding to the zirconated surface was only observed in the case of the phosphopeptides, with the best performance, as judged by streptavidin capture, observed for peptides with three or four phosphorylation sites and when spotted at pH 3. When fusing similar phosphopeptide tags to the affinity protein, the presence of four phosphate groups in the tag allows efficient immobilization of the proteins and efficient capture of their target.

Light-induced changes in magnetism in a coordination polymer heterostructure, Rb0.24Co[Fe(CN)6]0.74@K0.10Co[Cr(CN)6]0.70·nH2O and the role of the shell thickness on the properties of both core and shell.

Particles of formula Rb0.24Co[Fe(CN)6]0.74@K0.10Co[Cr(CN)6]0.70·nH2O with a light-responsive rubidium cobalt hexacyanoferrate (RbCoFe) core and a magnetic potassium cobalt hexacyanochromate (KCoCr) shell have been prepared and exhibit light-induced changes in the magnetization of the normally light-insensitive KCoCr shell, a new property resulting from the synergy between the core and shell of a coordination polymer heterostructure. A single batch of 135 ± 12 nm RbCoFe particles are used as seeds to generate three different core@shell samples, with KCoCr shell thicknesses of approximately 11, 23 and 37 nm, to probe the influence of the shell thickness over the particles' morphology and structural and magnetic properties. Synchrotron powder X-ray diffraction reveals that structural changes in the shell accompany the charge transfer induced spin transition (CTIST) of the core, giving direct evidence that the photomagnetic response of the shell is magnetomechanical in origin. The depth to which the KCoCr shell contributes to changes in magnetization is estimated to be approximately 24 nm when using a model that assumes a constant magnetic response of the core within the series of particles. In turn, the presence of the shell changes the nature of the CTIST of the core. As opposed to the usually observed first order transition exhibiting hysteresis, the CTIST becomes continuous in the core@shell particles.

Light-induced magnetization changes in a coordination polymer heterostructure of a Prussian blue analogue and a Hofmann-like Fe(II) spin crossover compound.

Coordination polymer thin film heterostructures of the Prussian blue analogue Ni(II)b[Cr(III)(CN)6](0.7)·nH2O (NiCr-PBA) and the 3D Hofmann-like spin crossover compound Fe(azpy)[Pt(CN)4]·xH2O {azpy = 4,4'-azopyridine} have been developed, and spin transition properties have been characterized via SQUID magnetometry and Raman spectroscopy. The magnetic response of the ferromagnetic NiCr-PBA layer (T(c) ≈ 70 K) can be altered by inducing the LIESST effect (light-induced excited spin state trapping) in the coupled paramagnetic Fe(II) spin crossover material. Whereas an increase in magnetization is measured for the single-phase Fe(azpy)[Pt(CN)4]·xH2O, a decrease in magnetization is observed for the heterostructure. These results indicate the LIESST effect alone cannot account for the sign and magnitude of the magnetization change in the heterostructure, but the temperature profile of the magnetization shows that significant changes in the NiCr-PBA network are correlated to the spin state of the Hofmann-like SCO network.

Size-dependent MRI relaxivity and dual imaging with Eu0.2Gd0.8PO4·H2O nanoparticles.

Three different sizes of Eu0.2Gd0.8PO4·H2O nanoparticles have been prepared to investigate the particle size influence on water proton relaxivity. Longitudinal relaxivity (r1) values increase for smaller particles, reaching as high as r1 = 6.13 mM(-1) s(-1) for a sample of 40 ± 4 nm particles, which, with a ratio of transverse/longitudinal relaxivity, r2/r1 = 1.27, are shown to be effective positive contrast agents. The correlation between relaxivity and the surface-to-volume ratio implies that access to surface Gd(3+) sites is the principal factor affecting relaxivity. On the other hand, although ionic molar relaxivity decreases for larger particles, the relaxivity per particle can be significantly greater. Gadolinium-based nanoparticles doped with fluorescent lanthanide elements have attracted attention for their dual-imaging abilities, combining magnetic resonance imaging (MRI) and fluorescence imaging agents. In both in vitro experiments with HeLa cells and in vivo experiments with C. elegans, strong red fluorescence is observed from Eu0.2Gd0.8PO4·H2O with high resolution, demonstrating the parallel use of the particles as fluorescence imaging agents.

High rate sodium ion insertion into core-shell nanoparticles of Prussian blue analogues.

We demonstrate that core-shell nanoparticles consisting of two different Prussian blue analogues, one high capacity and the other robust, can provide enhanced rate capability as cathode materials in sodium-ion batteries.

Synthesis and size control of iron(II) hexacyanochromate(III) nanoparticles and the effect of particle size on linkage isomerism.

The controlled synthesis of monodisperse nanoparticles of the cubic Prussian blue analogue iron(II) hexacyanochromate(III) is reported along with a kinetic study, using cyanide stretching frequencies, showing the variations of the activation energy (E(a)) of the linkage isomerism as a function of the particle size. Highly reproducible, cubic-shaped iron(II) hexacyanochromate(III) nanocrystals, with sizes ranging from 2 to 50 nm, are synthesized using a microemulsion technique, whereas a bulk synthesis yields nonuniform less monodisperse particles with sizes greater than 100 nm. Monitoring the cyanide stretching frequency with FTIR spectroscopy shows that the rate of isomerization is faster for smaller particles. Moreover, a kinetic analysis at different temperatures (255 K ≤ T ≤ 321 K) gives insight into the evolution of E(a) with the particle size. Finally, time-dependent powder X-ray diffraction and net magnetization confirm the FTIR observations. The data are interpreted within the concept of a simple two-component model with different activation energies for structures near the surface of the solid and within the bulk.

Bimetallic cyanide-bridged coordination polymers as lithium ion cathode materials: core@shell nanoparticles with enhanced cyclability.

Prussian blue analogues (PBAs) have recently been proposed as electrode materials for low-cost, long-cycle-life, and high-power batteries. However, high-capacity bimetallic examples show poor cycle stability due to surface instabilities of the reduced states. The present work demonstrates that, relative to single-component materials, higher capacity and longer cycle stability are achieved when using Prussian blue analogue core@shell particle heterostructures as the cathode material for Li-ion storage. Particle heterostructures with a size dispersion centered at 210 nm composed of a high-capacity K(0.1)Cu[Fe(CN)(6)](0.7)·3.8H(2)O (CuFe-PBA) core and lower capacity but highly stable shell of K(0.1)Ni[Fe(CN)(6)](0.7)·4.1H(2)O have been prepared and characterized. The heterostructures lead to the coexistence of both high capacity and long cycle stability because the shell protects the otherwise reactive surface of the highly reduced state of the CuFe-PBA core. Furthermore, interfacial coupling to the shell suppresses a known structural phase transition in the CuFe-PBA core, providing further evidence of synergy between the core and shell. The structure and chemical state of the heterostructure during electrochemical cycling have been monitored with ex situ X-ray diffraction and X-ray absorption experiments and compared to the behavior of the individual components.

DNA surface modified gadolinium phosphate nanoparticles as MRI contrast agents.

Oligonucleotide modified gadolinium phosphate nanoparticles have been prepared and their magnetic resonance relaxivity properties measured. Nanoparticles of GdPO4·H2O were synthesized in a water/oil microemulsion using IGEPAL CO-520 as surfactant, resulting in 50 to 100 nm particles that are highly dispersible and stable in water. Using surface modification chemistry previously established for zirconium phosphonate surfaces, the particles are directly modified with 5'-phosphate terminated oligonucleotides, and the specific interaction of the divalent phosphate with Gd(3+) sites at the surface is demonstrated. The ability of the modified nanoparticles to act as MRI contrast agents was determined by performing MR relaxivity measurements at 14.1 T. Solutions of nanopure water, Feridex, and Omniscan (FDA approved contrast agents) in 0.25% agarose were used for comparison and control purposes. MRI data confirm that GdPO4·H2O nanoparticles have relaxivities (r1, r2) comparable to those of commercially available contrast agents. In addition, the data suggest that biofunctionalization of the surface of the nanoparticles does not prevent their function as MRI contrast agents.

Supported lipid bilayers at skeletonized surfaces for the study of transmembrane proteins.

Skeletonized zirconium phosphonate surfaces are used to support planar lipid bilayers and are shown to be viable substrates for studying transmembrane proteins. The skeletonized surfaces provide space between the bilayer and the solid support to enable protein insertion and avoid denaturation. The skeletonized zirconium octadecylphosphonate surfaces were prepared using Langmuir-Blodgett techniques by mixing octadecanol with octadecylphosphonic acid. After zirconation of the transferred monolayer, rinsing the coating with organic solvent removes the octadecanol, leaving holes in the film ranging from ∼50 to ∼500 nm in diameter, depending on the octadecanol content. Upon subsequent deposition of a lipid bilayer, either by vesicle fusion or by Langmuir-Blodgett/Langmuir-Schaefer techniques, the lipid assemblies span the holes providing reservoirs beneath the bilayer. The viability of the supported bilayers as model membranes for transmembrane proteins was demonstrated by examining two approaches for incorporating the proteins. The BK channel protein inserts directly into a preformed bilayer on the skeletonized surface, in contrast to a bilayer on a nonskeletonized film, for which the protein associates only weakly. As a second approach, the integrin α(5)ß(1) was reconstituted in lipid vesicles, and its inclusion in supported bilayers on the skeletonized surface was achieved by vesicle fusion. The integrin retains its ability to recognize the extracellular matrix protein fibronectin when supported on the skeletonized film, again in contrast to the response if the bilayer is supported on a nonskeletonized film.

Engineering of a phosphorylatable tag for specific protein binding on zirconium phosphonate based microarrays.

A phosphorylatable tag was designed and fused at the C-terminal end of proteins, which allowed efficient and oriented immobilization of capture proteins on glass substrates coated with a zirconium phosphonate monolayer. The concept is demonstrated using Nanofitin directed against lysozyme. This peptide tag (DSDSSSEDE) contains four serines in an acidic environment, which favored its in vitro phosphorylation by casein kinase II. The resulting phosphate cluster at the C-terminal end of the protein provided a specific, irreversible, and multipoint attachment to the zirconium surface. In a microarray format, the high surface coverage led to high fluorescence signal after incubation with Alexa Fluor 647 labeled lysozyme. The detection sensitivity of the microarray for the labeled target was below 50 pM, owing to the exceptionally low background staining, which resulted in high fluorescence signal to noise ratios. The performance of this new anchoring strategy using a zirconium phosphonate modified surface compares favorably with that of other types of microarray substrates, such as nitrocellulose-based or epoxide slides, which bind proteins in a nonoriented way.

Photoinduced magnetism in core/shell Prussian blue analogue heterostructures of K(j)Ni(k)[Cr(CN)6]l·nH2O with Rb(a)Co(b)[Fe(CN)6]c·mH2O.

Core/shell and core/shell/shell particles comprised of the Prussian blue analogues K(j)Ni(k)[Cr(CN)(6)](l)·nH(2)O (A) and Rb(a)Co(b)[Fe(CN)(6)](c)·mH(2)O (B) have been prepared for the purpose of studying persistent photoinduced magnetization in the heterostructures. Synthetic procedures have been refined to allow controlled growth of relatively thick (50-100 nm) consecutive layers of the Prussian blue analogues while minimizing the mixing of materials at the interfaces. Through changes in the order in which the two components are added, particles with AB, ABA, BA, and BAB sequences have been prepared. The two Prussian blue analogues were chosen because B is photoswitchable, and A is ferromagnetic with a relatively high magnetic ordering temperature, ~70 K, although it is not known to exhibit photoinduced changes in its magnetic properties. Magnetization measurements on the heterostructured particles performed prior to irradiation show behavior characteristic of the individual components. On the other hand, after irradiation with visible light, the heterostructures undergo persistent photoinduced changes in magnetization associated with both the B and A analogues. The results suggest that structural changes in the photoactive B component distort the normally photoinactive A component, leading to a change in its magnetization.