Expanding the Reticular Chemistry Building Block Library toward Highly Connected Nets: Ultraporous MOFs Based on 18-Connected Ternary, Trigonal Prismatic Superpolyhedra.

The chemistry of metal-organic frameworks (MOFs) continues to expand rapidly, providing materials with diverse structures and properties. The reticular chemistry approach, where well-defined structural building blocks are combined together to form crystalline open framework solids, has greatly accelerated the discovery of new and important materials. However, its full potential toward the rational design of MOFs relies on the availability of highly connected building blocks because these greatly reduce the number of possible structures. Toward this, building blocks with connectivity greater than 12 are highly desirable but extremely rare. We report here the discovery of novel 18-connected, trigonal prismatic, ternary building blocks (tbb's) and their assembly into unique MOFs, denoted as Fe-tbb-MOF-x (x: 1, 2, 3), with hierarchical micro- and mesoporosity. The remarkable tbb is an 18-c supertrigonal prism, with three points of extension at each corner, consisting of triangular (3-c) and rectangular (4-c) carboxylate-based organic linkers and trigonal prismatic [Fe3(µ3-Ο)(-COO)6]+ clusters. The tbb's are linked together by an 18-c cluster made of 4-c ligands and a crystallographically distinct Fe3(µ3-Ο) trimer, forming overall a 3-D (3,4,4,6,6)-c five nodal net. The hierarchical, highly porous nature of Fe-tbb-MOF-x (x: 1, 2, 3) was confirmed by recording detailed sorption isotherms of Ar, CH4, and CO2 at 87, 112, and 195 K, respectively, revealing an ultrahigh BET area (4263-4847 m2 g-1) and pore volume (1.95-2.29 cm3 g-1). Because of the observed ultrahigh porosities, the H2 and CH4 storage properties of Fe-tbb-MOF-x were investigated, revealing well-balanced high gravimetric and volumetric deliverable capacities for cryoadsorptive H2 storage (11.6 wt %/41.4 g L-1, 77 K/100 bar-160 K/5 bar), as well as CH4 storage at near ambient temperatures (367 mg g-1/160 cm3 STP cm-3, 5-100 bar at 298 K), placing these materials among the top performing MOFs. The present work opens new directions to apply reticular chemistry for the construction of novel MOFs with tunable porosities based on contracted or expanded tbb analogues.

Establishing ZIF-8 as a reference material for hydrogen cryoadsorption: An interlaboratory study.

Hydrogen storage by cryoadsorption on porous materials has the advantages of low material cost, safety, fast kinetics, and high cyclic stability. The further development of this technology requires reliable data on the H2 uptake of the adsorbents, however, even for activated carbons the values between different laboratories show sometimes large discrepancies. So far no reference material for hydrogen cryoadsorption is available. The metal-organic framework ZIF-8 is an ideal material possessing high thermal, chemical, and mechanical stability that reduces degradation during handling and activation. Here, we distributed ZIF-8 pellets synthesized by extrusion to 9 laboratories equipped with 15 different experimental setups including gravimetric and volumetric analyzers. The gravimetric H2 uptake of the pellets was measured at 77 K and up to 100 bar showing a high reproducibility between the different laboratories, with a small relative standard deviation of 3-4 % between pressures of 10-100 bar. The effect of operating variables like the amount of sample or analysis temperature was evaluated, remarking the calibration of devices and other correction procedures as the most significant deviation sources. Overall, the reproducible hydrogen cryoadsorption measurements indicate the robustness of the ZIF-8 pellets, which we want to propose as a reference material.

Water-Stable etb-MOFs for Methane and Carbon Dioxide Storage.

We utilized the etb platform of MOFs for the synthesis of two new water-stable compounds based on amide functionalized trigonal tritopic organic linkers H3BTBTB (L1), H3BTCTB (L2) and Al3+ metal ions, namely, Al(L1) and Al(L2). The mesoporous Al(L1) material exhibits an impressive methane (CH4) uptake at high pressures and ambient temperature. The corresponding values of 192 cm3 (STP) cm-3, 0.254 g g-1 at 100 bar, and 298 K are among the highest reported for mesoporous MOFs, while the gravimetric and volumetric working capacities (between 80 bar and 5 bar) can be well compared to the best MOFs for CH4 storage. Furthermore, at 298 K and 50 bar, Al(L1) adsorbs 50 wt % (304 cm3 (STP) cm-3) CO2, values among the best recorded for CO2 storage using porous materials. To gain insight into the mechanism accounting for the resultant enhanced CH4 storage capacity, theoretical calculations were performed, revealing the presence of strong CH4 adsorption sites near the amide groups. Our work demonstrates that amide functionalized mesoporous etb-MOFs can be valuable for the design of versatile coordination compounds with CH4 and CO2 storage capacities comparable to ultra-high surface area microporous MOFs.

Boron Nitride Nanotubes Versus Carbon Nanotubes: A Thermal Stability and Oxidation Behavior Study.

Nanotubes made of boron nitride (BN) and carbon have attracted considerable attention within the literature due to their unique mechanical, electrical and thermal properties. In this work, BN and carbon nanotubes, exhibiting high purity (>99%) and similar surface areas (~200 m2/g), were systematically investigated for their thermal stability and oxidation behavior by combining thermal gravimetric analysis and differential scanning calorimetry methods at temperatures of up to ~1300 °C under a synthetic air flow environment. The BN nanotubes showed a good resistance to oxidation up to ~900 °C and fully transformed to boron oxide up to ~1100 °C, while the carbon nanotubes were stable up to ~450 °C and almost completely combusted up to ~800 °C. The different oxidation mechanisms are attributed to the different chemical nature of the two types of nanotubes.

Heterometallic In(III)-Pd(II) Porous Metal-Organic Framework with Square-Octahedron Topology Displaying High CO2 Uptake and Selectivity toward CH4 and N2.

The targeted synthesis of metal-organic frameworks (MOFs) with open metal sites, following reticular chemistry rules, provides a straightforward methodology toward the development of advanced porous materials especially for gas storage/separation applications. Using a palladated tetracarboxylate metalloligand as a 4-connected node, we succeeded in synthesizing the first heterobimetallic In(III)/Pd(II)-based MOF with square-octahedron (soc) topology. The new MOF, formulated as [In3O(L)1.5(H2O)2Cl]·n(solv) (1), features the oxo-centered trinuclear clusters, [In3(µ3-O)(-COO)6], acting as trigonal-prismatic 6-connected nodes that linked together with the metalloligand trans-[PdCl2(PDC)2] (L4-) (PDC: pyridine-3,5-dicarboxylate) to form a 3D network. After successful activation of 1 using supercritical CO2, high-resolution microporous analysis revealed the presence of small micropores (5.8 Å) with BET area of 795 m2 g-1 and total pore volume of 0.35 cm3 g-1. The activated solid shows high gravimetric (92.3 cm3 g-1) and volumetric (120.9 cm3 cm-3) CO2 uptake at 273 K and 1 bar as well as high CO2/CH4 (15.4 for a 50:50 molar mixture) and CO2/N2 (131.7 for a 10:90 molar mixture) selectivity, with moderate Qst0 for CO2 (29.8 kJ mol-1). Slight modifications of the synthesis conditions led to the formation of a different MOF with an anionic framework, having a chemical formula [Me2NH2][In(L)]· n(solv) (2). This MOF is constructed from pseudotetrahedral, mononuclear [In(-COO)4] nodes bridged by four L4- linkers, resulting in a 3D network with PtS topology.