Proof-of-Principle Experiment for Testing Strong-Field Quantum Electrodynamics with Exotic Atoms: High Precision X-Ray Spectroscopy of Muonic Neon.

To test bound-state quantum electrodynamics (BSQED) in the strong-field regime, we have performed high precision x-ray spectroscopy of the 5g-4f and 5f- 4d transitions (BSQED contribution of 2.4 and 5.2 eV, respectively) of muonic neon atoms in the low-pressure gas phase without bound electrons. Muonic atoms have been recently proposed as an alternative to few-electron high-Z ions for BSQED tests by focusing on circular Rydberg states where nuclear contributions are negligibly small. We determined the 5g_{9/2}- 4f_{7/2} transition energy to be 6297.08±0.04(stat)±0.13(syst) eV using superconducting transition-edge sensor microcalorimeters (5.2-5.5 eV FWHM resolution), which agrees well with the most advanced BSQED theoretical prediction of 6297.26 eV.

Deexcitation Dynamics of Muonic Atoms Revealed by High-Precision Spectroscopy of Electronic K X Rays.

We observed electronic K x rays emitted from muonic iron atoms using superconducting transition-edge sensor microcalorimeters. The energy resolution of 5.2 eV in FWHM allowed us to observe the asymmetric broad profile of the electronic characteristic Kα and Kß x rays together with the hypersatellite K^{h}α x rays around 6 keV. This signature reflects the time-dependent screening of the nuclear charge by the negative muon and the L-shell electrons, accompanied by electron side feeding. Assisted by a simulation, these data clearly reveal the electronic K- and L-shell hole production and their temporal evolution on the 10-20 fs scale during the muon cascade process.

Experimental evidence of nonthermal acceleration of relativistic electrons by an intensive laser pulse.

Nonthermal acceleration of relativistic electrons is investigated with an intensive laser pulse. An energy distribution function of energetic particles in the universe or cosmic rays is well represented by a power-law spectrum, therefore, nonthermal acceleration is essential to understand the origin of cosmic rays. A possible candidate for the origin of cosmic rays is wakefield acceleration at relativistic astrophysical perpendicular shocks. The wakefield is considered to be excited by large-amplitude precursor light waves in the upstream of the shocks. Substituting an intensive laser pulse for the large amplitude light waves, we performed a model experiment of the shock environments in a laboratory plasma. An intensive laser pulse was propagated in a plasma tube created by imploding a hollow polystyrene cylinder, as the large amplitude light waves propagated in the upstream plasma at an astrophysical shock. Nonthermal electrons were generated, and the energy distribution functions of the electrons have a power-law component with an index of ~2. We described the detailed procedures to obtain the nonthermal components from data obtained by an electron spectrometer.

Hot electrons transverse refluxing in ultraintense laser-solid interactions.

We have analyzed the coupling of ultraintense lasers (at ∼2×10{19} W/cm{2}) with solid foils of limited transverse extent (∼10 s of µm) by monitoring the electrons and ions emitted from the target. We observe that reducing the target surface area allows electrons at the target surface to be reflected from the target edges during or shortly after the laser pulse. This transverse refluxing can maintain a hotter, denser and more homogeneous electron sheath around the target for a longer time. Consequently, when transverse refluxing takes places within the acceleration time of associated ions, we observe increased maximum proton energies (up to threefold), increased laser-to-ion conversion efficiency (up to a factor 30), and reduced divergence which bodes well for a number of applications.

Effect of reentrant cone geometry on energy transport in intense laser-plasma interactions.

The energy transport in cone-guided low- Z targets has been studied for laser intensities on target of 2.5x10(20) W cm(-2). Extreme ultraviolet (XUV) imaging and transverse optical shadowgraphy of the rear surfaces of slab and cone-slab targets show that the cone geometry strongly influences the observed transport patterns. The XUV intensity showed an average spot size of 65+/-10 microm for slab targets. The cone slabs showed a reduced spot size of 44+/-10 microm. The shadowgraphy for the aforementioned shots demonstrate the same behavior. The transverse size of the expansion pattern was 357+/-32 microm for the slabs and reduced to 210+/-30 microm. A transport model was constructed which showed that the change in transport pattern is due to suppression of refluxing electrons in the material surrounding the cone.

Energy increase in multi-MeV ion acceleration in the interaction of a short pulse laser with a cluster-gas target.

An approach for accelerating ions, with the use of a cluster-gas target and an ultrashort pulse laser of 150-mJ energy and 40-fs duration, is presented. Ions with energy 10-20 MeV per nucleon having a small divergence (full angle) of 3.4 degrees are generated in the forward direction, corresponding to approximately tenfold increase in the ion energies compared to previous experiments using solid targets. It is inferred from a particle-in-cell simulation that the high energy ions are generated at the rear side of the target due to the formation of a strong dipole vortex structure in subcritical density plasmas.

Superthermal and efficient-heating modes in the interaction of a cone target with ultraintense laser light.

Interactions between a relativistic-intensity laser pulse and a cone-wire target are studied by changing the focusing point of the pulse. The pulse, when focused on the sidewall of the cone, produced superthermal electrons with an energy >10 MeV, whereas less energetic electrons approximately 1 MeV were produced by the pulse when focused on the cone tip. Efficient heating of the wire was indicated by significant neutron signals observed when the pulse was focused on the tip. Particle-in-cell simulation results show reduced heating of the wire due to energetic electrons produced by specularly reflected light at the sidewall.

Transient electrostatic fields and related energetic proton generation with a plasma fiber.

We observe a hollow structure and a fine ring in the proton images from a petawatt scale laser interaction with a "cone-fiber" target. The protons related to the hollow structure are accelerated from the cone-tip surface and deflected later by a radial electric field surrounding the fiber. Those associated with the fine ring are accelerated from the fiber surface by this radial electric field. This field is found to decay exponentially within 3 ps from about 5 x 10(12) V/m. Two-dimensional particle-in-cell simulations produce similar proton angular distributions.

Enhancement of energetic electrons and protons by cone guiding of laser light.

Energetic electrons and protons are observed when a target consisting of a reentrant cone with a disk at the tip is irradiated by a petawatt (PW) laser at an intensity of approximately 10(19) W cm(-2). The angular distribution of the electrons and protons, dependent on the open angle of the reentrant cone, is found to differ from that in the case when a target with planar geometry is used. Two jet beams are observed, in directions parallel to the cone axis and normal to the cone-shaped wall. The number and cutoff energies of the generated protons are also related to the open angle of the cone. The efficiency of the generation of energetic electrons from the cone target is 2-3 times higher than that from a simple plane target. These results indicate a guiding of the PW laser beam in the cone geometry.

Demonstration of bulk acceleration of ions in ultraintense laser interactions with low-density foams.

Ion acceleration inside low-density foams irradiated by ultraintense laser pulses has been studied experimentally and theoretically. It is found that the ion generation is closely correlated with the suppressed hot electron transport inside the foams. Particle-in-cell simulations suggest that localized electrostatic fields with multi peaks around the surfaces of lamellar layers inside the foams are induced. These fields inhibit hot electron transport and meanwhile accelerate ions inside the foams, forming a bulk acceleration in contrast to the surface acceleration at the front and rear sides of a thin solid target.

Plasma devices to guide and collimate a high density of MeV electrons.

The development of ultra-intense lasers has facilitated new studies in laboratory astrophysics and high-density nuclear science, including laser fusion. Such research relies on the efficient generation of enormous numbers of high-energy charged particles. For example, laser-matter interactions at petawatt (10(15) W) power levels can create pulses of MeV electrons with current densities as large as 10(12) A cm(-2). However, the divergence of these particle beams usually reduces the current density to a few times 10(6) A cm(-2) at distances of the order of centimetres from the source. The invention of devices that can direct such intense, pulsed energetic beams will revolutionize their applications. Here we report high-conductivity devices consisting of transient plasmas that increase the energy density of MeV electrons generated in laser-matter interactions by more than one order of magnitude. A plasma fibre created on a hollow-cone target guides and collimates electrons in a manner akin to the control of light by an optical fibre and collimator. Such plasma devices hold promise for applications using high energy-density particles and should trigger growth in charged particle optics.

High-energy electrons produced in subpicosecond laser-plasma interactions from subrelativistic laser intensities to relativistic intensities.

The characteristics of the forward hot electrons produced by subpicosecond laser-plasma interactions are studied for different laser polarizations at laser intensities from subrelativistic to relativistic. The peak of the hot electron beam produced by p-polarized laser beam shifts to the laser propagation direction from the target normal direction as the laser intensity reaches the relativistic. For s-polarized laser pulse, hot electrons are mainly directed to the laser axis direction. The temperature and the maximum energy of hot electrons are much higher than that expected by the empirical scaling law. The energy spectra of the hot electrons evolve to be a single-temperature structure at relativistic laser intensities from the two-temperature structure at subrelativistic intensities. For relativistic laser intensities, the forward hot electrons are less dependent on the laser polarization under the laser conditions. The existing of a preplasma formed by the laser amplified spontaneous emission pedestal plays an important role in the interaction. One-dimensional particle-in-cell simulations reproduce the most characteristics observed in the experiment.

Fast heating of ultrahigh-density plasma as a step towards laser fusion ignition.

Modern high-power lasers can generate extreme states of matter that are relevant to astrophysics, equation-of-state studies and fusion energy research. Laser-driven implosions of spherical polymer shells have, for example, achieved an increase in density of 1,000 times relative to the solid state. These densities are large enough to enable controlled fusion, but to achieve energy gain a small volume of compressed fuel (known as the 'spark') must be heated to temperatures of about 108 K (corresponding to thermal energies in excess of 10 keV). In the conventional approach to controlled fusion, the spark is both produced and heated by accurately timed shock waves, but this process requires both precise implosion symmetry and a very large drive energy. In principle, these requirements can be significantly relaxed by performing the compression and fast heating separately; however, this 'fast ignitor' approach also suffers drawbacks, such as propagation losses and deflection of the ultra-intense laser pulse by the plasma surrounding the compressed fuel. Here we employ a new compression geometry that eliminates these problems; we combine production of compressed matter in a laser-driven implosion with picosecond-fast heating by a laser pulse timed to coincide with the peak compression. Our approach therefore permits efficient compression and heating to be carried out simultaneously, providing a route to efficient fusion energy production.