Roles of Activated Carbon in UV/Chlorine/Activated Carbon-TiO2 Process for Micropollutant Abatement and DBP Control.

The ultraviolet (UV)/chlorine process has attracted increasing attention for micropollutant abatement. However, the limited hydroxyl radical (HO•) generation and the formation of undesired disinfection byproducts (DBPs) are the two major issues in this process. This study investigated the roles of activated carbon (AC) in the UV/chlorine/AC-TiO2 process for micropollutant abatement and DBP control. The degradation rate constant of metronidazole by UV/chlorine/AC-TiO2 was 3.44, 2.45, and 1.58 times higher than those by UV/AC-TiO2, UV/chlorine, and UV/chlorine/TiO2, respectively. AC acted as an electron conductor and dissolved oxygen (DO) adsorbent, resulting in the steady-state concentration of HO• that was ∼2.5 times that of UV/chlorine. Compared with UV/chlorine, the formation of total organic chlorine (TOCl) and known DBPs in UV/chlorine/AC-TiO2 was reduced by 62.3 and 75.7%, respectively. DBP could be controlled via adsorption on AC, and the increased HO• and decreased chlorine radical (Cl•) and chlorine exposure reduced DBP formation. UV/chlorine/AC-TiO2 efficiently abated 16 structurally different micropollutants under environmentally relevant conditions owing to the enhanced generation of HO•. This study provides a new strategy for designing catalysts with photocatalytic and adsorption properties for UV/chlorine to promote micropollutant abatement and DBP control.