RESUMO
The controlled vapor-phase synthesis of two-dimensional (2D) transition metal dichalcogenides (TMDs) is essential for functional applications. While chemical vapor deposition (CVD) techniques have been successful for transition metal sulfides, extending these methods to selenides and tellurides often faces challenges due to uncertain roles of hydrogen (H2) in their synthesis. Using CVD growth of MoSe2 as an example, this study illustrates the role of a H2-free environment during temperature ramping in suppressing the reduction of MoO3, which promotes effective vaporization and selenization of the Mo precursor to form MoSe2 monolayers with excellent crystal quality. As-synthesized MoSe2 monolayer-based field-effect transistors show excellent carrier mobility of up to 20.9 cm2/(V·s) with an on-off ratio of 7 × 107. This approach can be extended to other TMDs, such as WSe2, MoTe2, and MoSe2/WSe2 in-plane heterostructures. Our work provides a rational and facile approach to reproducibly synthesize high-quality TMD monolayers, facilitating their translation from laboratory to manufacturing.
RESUMO
Here, we propose phase and interfacial engineering by inserting a functional WO3 layer and selenized it to achieve a 2D-layered WSe2/WO3 heterolayer structure by a plasma-assisted selenization process. The 2D-layered WSe2/WO3 heterolayer was coupled with an Al2O3 film as a resistive switching (RS) layer to form a hybrid structure, with which Pt and W films were used as the top and bottom electrodes, respectively. The device with good uniformity in SET/RESET voltage and high low-/high-resistance window can be obtained by controlling a conversion ratio from a WO3 film to a 2D-layered WSe2 thin film. The Pt/Al2O3/(2D-layered WSe2/WO3)/W structure shows remarkable improvement to the pristine Pt/Al2O3/W and Pt/Al2O3/2D-layered WO3/W in terms of low SET/RESET voltage variability (-20/20)%, multilevel characteristics (uniform LRS/HRS distribution), high on/off ratio (104-105), and retention (â¼105 s). The thickness of the obtained WSe2 was tuned at different gas ratios to optimize different 2D-layered WSe2/WO3 (%) ratios, showing a distinctive trend of reduced and uniform SET/RESET voltage variability as 2D-layered WSe2/WO3 (%) changes from 90/10 (%) to 45/55 (%), respectively. The electrical measurements confirm the superior ability of the metallic 1T phase of the 2D-layered WSe2 over the semiconducting 2H phase. Through systemic studies of RS behaviors on the effect of 1T/2H phases and 2D-layered WSe2/WO3 ratios, the low-temperature plasma-assisted selenization offers compatibility with the temperature-limited 3D integration process and also provides much better thickness control over a large area.
RESUMO
Here, the successful transformation of graphitic carbon with a high degree of graphitization and a nanoflake structure from pyrolytic tire carbon black was demonstrated. First, amorphous carbon black with a porous structure was obtained after pyrolysis and simple preacid treatments. Subsequently, the carbon black was converted into a highly graphitic structure at a relatively low temperature (850 °C) through a facile electrochemical route using molten salt, which is ecofriendly and has high potential for large-scale graphitization compared to conventional incineration techniques. Moreover, we further improved the crystallinity and uniformity of the product simultaneously by directly mixing the metal oxide catalyst Fe2O3 with a carbon precursor. The mechanism of this metal-catalyzed electrochemical graphitization has been discussed in detail. To confirm their potential in practical applications, the as-prepared graphitized nanoflakes were used as conductive additives for silicon anodes in lithium-ion batteries, which showed a performance comparable to those utilizing commercial Super-P additives, exhibiting an initial Coulombic efficiency of approximately 79.7% and a high capacity retention of approximately 45.8% after 100 cycles with a reversible capacity of 1220 mAh g-1 at a current rate of 400 mA g-1. Hence, successfully recovered waste-tire-derived carbon black utilizing a low-temperature Fe2O3-catalyzed electrochemical process opens a pathway in low-temperature graphitization toward a sustainable value-added application in the field of energy storage.
RESUMO
Zinc ion batteries have been extensively studied with an aqueous electrolyte system. However, the batteries suffer from a limited potential window, gas evolution, cathode dissolution, and dendrite formation on the anode. Considering these limitations, we developed an alternative electrolyte system based on deep eutectic solvents (DESs) because of their low cost, high stability, biodegradability, and non-flammability, making them optimal candidates for sustainable batteries. The DES electrolyte enables reversible Zn plating/stripping and effectively suppresses zinc dendrite formation. Furthermore, in-depth characterizations reveal that the energy storage mechanism can be attributed to [ZnCl]+ ion intercalation and the intermediate complex ion plays a pivotal role in electrochemical reactions, which deliver a high reversible capacity of 310 mAh g-1 at 0.1 A g-1and long-term stability (167 mAh g-1 at a current density of 0.3 A g-1 after 300 cycles, Coulombic efficiency: â¼98%). Overall, this work represents our new finding in rechargeable batteries with the DES electrolyte.
RESUMO
BACKGROUND: Redirection of natural killer (NK) cells with chimeric antigen receptors (CAR) is attractive in developing off-the-shelf CAR therapeutics for cancer treatment. However, the site-specific integration of a CAR gene into NK cells remains challenging. METHODS: In the present study, we genetically modified human induced pluripotent stem cells (iPSCs) with a zinc finger nuclease (ZFN) technology to introduce a cDNA encoding an anti-EpCAM CAR into the adeno-associated virus integration site 1, a "safe harbour" for transgene insertion into human genome, and next differentiated the modified iPSCs into CAR-expressing iNK cells. RESULTS: We detected the targeted integration in 4 out of 5 selected iPSC clones, 3 of which were biallelically modified. Southern blotting analysis revealed no random integration events. iNK cells were successfully derived from the modified iPSCs with a 47-day protocol, which were morphologically similar to peripheral blood NK cells, displayed NK phenotype (CD56+CD3-), and expressed NK receptors. The CAR expression of the iPSC-derived NK cells was confirmed with RT-PCR and flow cytometry analysis. In vitro cytotoxicity assay further confirmed their lytic activity against NK cell-resistant, EpCAM-positive cancer cells, but not to EpCAM-positive normal cells, demonstrating the retained tolerability of the CAR-iNK cells towards normal cells. CONCLUSION: Looking ahead, the modified iPSCs generated in the current study hold a great potential as a practically unlimited source to generate anti-EpCAM CAR iNK cells.
Assuntos
Células-Tronco Pluripotentes Induzidas , Receptores de Antígenos Quiméricos , Diferenciação Celular , Molécula de Adesão da Célula Epitelial/genética , Molécula de Adesão da Célula Epitelial/metabolismo , Humanos , Células-Tronco Pluripotentes Induzidas/metabolismo , Células Matadoras Naturais , Receptores de Antígenos Quiméricos/genética , Receptores de Antígenos Quiméricos/metabolismoRESUMO
Atomically thin transition metal dichalcogenides (TMDC) have received much attention due to their wide variety of optical and electronic properties. Among various TMDC materials, molybdenum disulfide (MoS2) has been intensely studied owing to its potential applications in nanoelectronics and optoelectronics. However, two-dimensional MoS2 photodetectors suffer from low responsivity due to low optical cross section. Combining MoS2 with plasmonic nanostructures can drastically increase scattering cross section and enhance local light-matter interaction. Moreover, suspended MoS2 has been shown to exhibit higher photoluminescence intensity and strong photogating effect, which can be employed in photodetectors. Herein, we propose an approach to utilize plasmonic nanostructures and physical suspension for 2D MoS2 photosensing enhancement by hybridizing 2D bilayer MoS2, 1D silicon nanowires, and 0D silver nanoparticles. The hybrid structure shows a gateless responsivity of 402.4 A/W at a wavelength of 532 nm, which represents the highest value among the ever reported gateless plasmonic MoS2 photodetector. The great responsivity and large active area results in an exceptional detectivity of 2.34 × 1012 Jones. This study provides a new approach for designing high-performance 2D TMDC-based optoelectronic devices.
RESUMO
Real-time, daily health monitoring can provide large amounts of patient data, which may greatly improve the likelihood of diagnosing health conditions at an early stage. One potential sensor is a flexible humidity sensor to monitor moisture and humidity information such as dehydration. However, achieving a durable functional nanomaterial-based flexible humidity sensor remains a challenge due to partial desorption of water molecules during the recovery process, especially at high humidities. In this work, we demonstrate a highly stable resistive-type Pd/HNb3O8 humidity sensor, which exhibits a perdurable performance for over 100 h of cycle tests under a 90% relative humidity (RH) without significant performance degradation. One notable advantage of the Pd/HNb3O8 humidity sensor is its ability to regulate hydroniums due to the strong reducibility of H atoms dissociated on the Pd surface. This feature realizes a high stability even at a high humidity (99.9% RH). Using this superior performance, the Pd/HNb3O8 humidity sensor realizes wireless monitoring of the changes in the fingertip humidity of an adult under different physiological states, demonstrating a facile and reliable path for dehydration diagnosis.
Assuntos
Umidade , Nanoestruturas/química , Água/análise , Dispositivos Eletrônicos Vestíveis , Adsorção , Adulto , Eletrodos , Grafite/química , Humanos , Chumbo/química , Monitorização Fisiológica/instrumentação , Monitorização Fisiológica/métodos , Nióbio/química , Água/químicaRESUMO
Transition metal dichalcogenides (TMDCs) have recently attracted a tremendous amount of attention owing to their superior optical and electrical properties as well as the interesting and various nanostructures that are created by different synthesis processes. However, the atomic thickness of TMDCs limits the light absorption and results in the weak performance of optoelectronic devices, such as photodetectors. Here, we demonstrate the approach to increase the surface area of TMDCs by a one-step synthesis process of TMDC nanowalls from WOx into three-dimensional (3D) WS2 nanowalls. By utilizing a rapid heating and rapid cooling process, the formation of 3D nanowalls with a height of approximately 150 nm standing perpendicularly on top of the substrate can be achieved. The combination of core-shell colloidal quantum dots (QDs) with three different emission wavelengths and 3D WS2 nanowalls further improves the performance of WS2-based photodetector devices, including a photocurrent enhancement of 320-470% and shorter response time. The significant results of the core-shell QD-WS2 hybrid devices can be contributed by the high nonradiative energy transfer efficiency between core-shell QDs and the nanostructured material, which is caused by the spectral overlap between the emission of core-shell QDs and the absorption of WS2. Besides, outstanding NO2 gas-sensing performance of core-shell QDs/WS2 devices can be achieved with an extremely low detection limit of 50 ppb and a fast response time of 26.8 s because of local p-n junctions generated by p-type 3D WS2 nanowalls and n-type core-shell CdSe-ZnS QDs. Our work successfully reveals the energy transfer phenomenon in core-shell QD-WS2 hybrid devices and shows great potential in commercial multifunctional sensing applications.
RESUMO
The rechargeable aluminum-ion battery (AIB) is a promising candidate for next-generation high-performance batteries, but its cathode materials require more development to improve their capacity and cycling life. We have demonstrated the growth of MoSe2 three-dimensional helical nanorod arrays on a polyimide substrate by the deposition of Mo helical nanorod arrays followed by a low-temperature plasma-assisted selenization process to form novel cathodes for AIBs. The binder-free 3D MoSe2-based AIB shows a high specific capacity of 753 mAh g-1 at a current density of 0.3 A g-1 and can maintain a high specific capacity of 138 mAh g-1 at a current density of 5 A g-1 with 10â¯000 cycles. Ex situ Raman, XPS, and TEM characterization results of the electrodes under different states confirm the reversible alloying conversion and intercalation hybrid mechanism during the discharge and charge cycles. All possible chemical reactions were proposed by the electrochemical curves and characterization. Further exploratory works on interdigital flexible AIBs and stretchable AIBs were demonstrated, exhibiting a steady output capacity under different bending and stretching states. This method provides a controllable strategy for selenide nanostructure-based AIBs for use in future applications of energy-storage devices in flexible and wearable electronics.
RESUMO
Aluminum-sulfur batteries (ASBs) have attracted substantial interest due to their high theoretical specific energy density, low cost, and environmental friendliness, while the traditional sulfur cathode and ionic liquid have very fast capacity decay, limiting cycling performance because of the sluggishly electrochemical reaction and side reactions with the electrolyte. Herein, we demonstrate, for the first time, excellent rechargeable aluminum-selenium batteries (ASeBs) using a new deep eutectic solvent, thiourea-AlCl3, as an electrolyte and Se nanowires grown directly on a flexible carbon cloth substrate (Se NWs@CC) by a low-temperature selenization process as a cathode. Selenium (Se) is a chemical analogue of sulfur with higher electronic conductivity and lower ionization potential that can improve the battery kinetics on the sluggishly electrochemical reaction and the reduction of the polarization where the thiourea-AlCl3 electrolyte can stabilize the side reaction during the reversible conversion reaction of Al-Se alloying processes during the charge-discharge process, yielding a high specific capacity of 260 mAh g-1 at 50 mA g-1 and a long cycling life of 100 times with a high Coulombic efficiency of nearly 93% at 100 mA g-1. The working mechanism based on the reversible conversion reaction of the Al-Se alloying processes, confirmed by the ex situ Raman, XRD, and XPS measurements, was proposed. This work provides new insights into the development of rechargeable aluminum-chalcogenide (S, Se, and Te) batteries.
RESUMO
In this work, we demonstrated nano-scaled Laue diffractions by a focused polychromatic synchrotron radiation beam to discover what happens in MoS2 when van der Waals epitaxy is locally invalid. A stronger exciton recombination with a local charge depletion in the density of 1 × 1013 cm-2, extrapolated by Raman scattering and photoluminescence, occurs in grains, which exhibits a preferred orientation of 30° rotation with respect to the c-plane of a sapphire substrate. Else, the charge doping and trion recombination dominate instead. In addition to the breakthrough in extrapolating mesoscopic crystallographic characteristics, this work opens the feasibility to manipulate charge density by the selection of the substrate-induced disturbances without external treatment and doping. Practically, the 30° rotated orientation in bilayer MoS2 films is promoted on inclined facets in the patterned sapphire substrate, which exhibits a periodic array of charge depletion of about 1.65 × 1013 cm-2. The built-in manipulation of carrier concentrations could be a potential candidate to lateral and large-area electronics based on 2D materials.
RESUMO
The multilayer 1T-TaSe2 is successfully synthesized by annealing a Se-implanted Ta thin film on the SiO2/Si substrate. Material analyses confirm the 1T (octahedral) structure and the quasi-2D nature of the prepared TaSe2. Temperature-dependent resistivity reveals that the multilayer 1T-TaSe2 obtained by our method undergoes a commensurate charge-density wave (CCDW) transition at around 500 K. This synthesis process has been applied to synthesize MoSe2 and HfSe2 and expanded for synthesis of one more transition-metal dichalcogenide (TMD) material. In addition, the main issue of the process, that is, the excess metal capping on the TMD layers, is solved by the reduction of thickness of the as-deposited metal thin film in this work.
RESUMO
In this work, three-dimensional (3D) CoMoSe4 nanosheet arrays on network fibers of a carbon cloth denoted as CoMoSe4@C converted directly from CoMoO4 nanosheet arrays prepared by a hydrothermal process followed by the plasma-assisted selenization at a low temperature of 450 °C as an anode for sodium-ion battery (SIB) were demonstrated for the first time. With the plasma-assisted treatment on the selenization process, oxygen (O) atoms can be replaced by selenium (Se) atoms without the degradation on morphology at a low selenization temperature of 450 °C. Owing to the high specific surface area from the well-defined 3D structure, high electron conductivity, and bi-metal electrochemical activity, the superior performance with a large sodium-ion storage of 475 mA h g-1 under 0.5-3 V potential range at 0.1 A g-1 was accomplished by using this CoMoSe4@C as the electrode. Additionally, the capacity retention was well maintained over 80 % from the second cycle, exhibiting a satisfied capacity of 301 mA h g-1 even after 50 cycles. The work delivered a new approach to prepare a binary transition metallic selenide and definitely enriches the possibilities for promising anode materials in SIBs with high performances.
RESUMO
Using induced pluripotent stem cells (iPSCs) to derive chimeric antigen receptor-modified T (CAR-T) cells has great industrial potential. A previous study used αß T cell-derived CAR-modified iPSCs to produce CAR-T cells. However, these αß T cells are restricted to autologous use and only recognize single cancer antigen. To make CAR-T alternative for allogeneic use, we reprogrammed γδ T cell into iPSCs (γδ T-iPSCs) to circumvent the risk of graft-versus-host disease. To target multiple cancer-associated antigens, we used an "NK cell-promoting" protocol to differentiate γδ T-iPSCs and to induce expression of natural killer receptors (NKRs). Through such two-step strategy, mimetic γδ T cells endowed with an array of NKRs and thus designated as "γδ natural killer T (γδ NKT) cells" were derived. With no/low-level expression of inhibitory killer cell immunoglobulin-like receptors (KIRs) and immune checkpoint receptors, γδ NKT cells may provide a potent "off-the-shelf" cytotoxic cell source to recognize multiple ubiquitous antigens in a broad spectrum of cancers.
Assuntos
Antígenos de Neoplasias/imunologia , Células-Tronco Pluripotentes Induzidas/imunologia , Células T Matadoras Naturais/imunologia , Neoplasias/imunologia , Receptores de Antígenos de Linfócitos T gama-delta/imunologia , Receptores de Antígenos Quiméricos/imunologia , Antígenos de Neoplasias/genética , Células HCT116 , Células Hep G2 , Humanos , Células-Tronco Pluripotentes Induzidas/patologia , Células K562 , Células MCF-7 , Células T Matadoras Naturais/patologia , Neoplasias/genética , Receptores de Antígenos de Linfócitos T alfa-beta/genética , Receptores de Antígenos de Linfócitos T alfa-beta/imunologia , Receptores de Antígenos Quiméricos/genética , Células THP-1RESUMO
A facile approach for the synthesis of Au- and Pt-decorated CuInS2 nanocrystals (CIS NCs) as sensitizer materials on the top of MoS2 bilayers is demonstrated. A single surfactant (oleylamine) is used to prepare such heterostructured noble metal decorated CIS NCs from the pristine CIS. Such a feasible way to synthesize heterostructured noble metal decorated CIS NCs from the single surfactant can stimulate the development of the functionalized heterostructured NCs in large scale for practical applications such as solar cells and photodetectors. Photodetectors based on MoS2 bilayers with the synthesized nanocrystals display enhanced photocurrent, almost 20-40 times higher responsivity and the On/Off ratio is enlarged one order of magnitude compared with the pristine MoS2 bilayers-based photodetectors. Remarkably, by using Pt- or Au-decorated CIS NCs, the photocurrent enhancement of MoS2 photodetectors can be tuned between blue (405 nm) to green (532 nm). The strategy described here acts as a perspective to significantly improve the performance of MoS2 -based photodetectors with the controllable absorption wavelengths in the visible light range, showing the feasibility of the possible color detection.
RESUMO
Current donor cell-dependent strategies can only produce limited "made-to-order" therapeutic natural killer (NK) cells for limited patients. To provide unlimited "off-the-shelf" NK cells that serve many recipients, we designed and demonstrated a holistic manufacturing scheme to mass-produce NK cells from induced pluripotent stem cells (iPSCs). Starting with a highly accessible human cell source, peripheral blood cells (PBCs), we derived a good manufacturing practice-compatible iPSC source, PBC-derived iPSCs (PBC-iPSCs) for this purpose. Through our original protocol that excludes CD34+ cell enrichment and spin embryoid body formation, high-purity functional and expandable NK cells were generated from PBC-iPSCs. Above all, most of these NK cells expressed no killer cell immunoglobulin-like receptors (KIRs), which renders them unrestricted by recipients' human leukocyte antigen genotypes. Hence, we have established a practical "from blood cell to stem cells and back with less (less KIRs)" strategy to generate abundant "universal" NK cells from PBC-iPSCs for a wide range of patients.
Assuntos
Técnicas de Cultura de Células/métodos , Diferenciação Celular/genética , Células-Tronco Pluripotentes Induzidas/citologia , Células Matadoras Naturais/citologia , Proliferação de Células/genética , Corpos Embrioides/citologia , Regulação da Expressão Gênica no Desenvolvimento/genética , Humanos , Células-Tronco Pluripotentes Induzidas/metabolismo , Células Matadoras Naturais/metabolismo , Células-Tronco de Sangue Periférico/citologia , Células-Tronco de Sangue Periférico/metabolismo , Receptores KIR/genéticaRESUMO
Virus-derived gene transfer vectors have been successfully employed to express the transcription activator-like effector nucleases (TALENs) in mammalian cells. Since the DNA-binding domains of TALENs consist of the variable di-residue (RVD)-containing tandem repeat modules and virus genome with repeated sequences is susceptible to genetic recombination, we investigated several factors that might affect TALEN cleavage efficiency of baculoviral vectors. Using a TALEN system designed to target the AAVS1 locus, we observed increased sequence instability of the TALE repeat arrays when a higher multiplicity of infection (MOI) of recombinant viruses was used to produce the baculoviral vectors. We also detected more deleterious mutations in the TALE DNA-binding domains when both left and right TALEN arms were placed into a single expression cassette as compared to the viruses containing one arm only. The DNA sequence changes in the domains included deletion, addition, substitution, and DNA strand exchange between the left and right TALEN arms. Based on these observations, we have developed a protocol using a low MOI to produce baculoviral vectors expressing TALEN left and right arms separately. Cotransduction of the viruses produced by this optimal protocol provided an improved TALEN cleavage efficiency and enabled effective site-specific transgene integration in human cells.