Room-Temperature Phase Transition Material with Switchable Second-Order Nonlinear Optical Properties.

Phase transition materials with switchable second-order nonlinear optical (NLO) properties have attracted extensive attention because of their great application potential in photoelectric switches, sensors, and modulators, while metal-free organics with NLO switchability near room temperature remain scarce. Herein, we report a hydrogen-bonded metal-free organic crystal, 2-methylpropan-2-aminium 2,2-dimethylpropanoate (1), exhibiting a room-temperature phase transition and favorable NLO switchability. Through investigations on its thermal anomalies, dielectric properties, and crystal structures, we uncover that 1 holds a near-room-temperature phase transition at 303 K from noncentrosymmetric point group C2v to centrosymmetric one D2h, which is attributed to the order-disorder transformations of both tert-butylamine cations and dimethylpropionic acid anions. Accompanied by symmetry change during the phase transition, 1 exhibits reversible and repeatable NLO "on-off" switchability with a desirable switching contrast ratio of ca. 19 between high and low NLO states. This discovery demonstrates a metal-free organic crystal with NLO switching behavior near room temperature, serving as a promising candidate in smart and ecofriendly photoelectric functional materials and devices.

Biodegradable ferroelectric molecular crystal with large piezoelectric response.

Transient implantable piezoelectric materials are desirable for biosensing, drug delivery, tissue regeneration, and antimicrobial and tumor therapy. For use in the human body, they must show flexibility, biocompatibility, and biodegradability. These requirements are challenging for conventional inorganic piezoelectric oxides and piezoelectric polymers. We discovered high piezoelectricity in a molecular crystal HOCH2(CF2)3CH2OH [2,2,3,3,4,4-hexafluoropentane-1,5-diol (HFPD)] with a large piezoelectric coefficient d33 of ~138 picocoulombs per newton and piezoelectric voltage constant g33 of ~2450 × 10-3 volt-meters per newton under no poling conditions, which also exhibits good biocompatibility toward biological cells and desirable biodegradation and biosafety in physiological environments. HFPD can be composite with polyvinyl alcohol to form flexible piezoelectric films with a d33 of 34.3 picocoulombs per newton. Our material demonstrates the ability for molecular crystals to have attractive piezoelectric properties and should be of interest for applications in transient implantable electromechanical devices.

A Sn-Based Hybrid Ferroelastic Semiconductor with High-Temperature Dielectric Switching.

Organic-inorganic halide hybrids have been extensively developed and used in optoelectronic devices because of their superior performance such as ease of assembly, flexible structural tunability, and excellent optoelectronic properties. Ferroelastic strain might be used to modulate and control photoelectric properties such as photovoltaic voltage, while organic-inorganic hybrid ferroelastic semiconductors remain relatively unexplored. Herein, we successfully design a new Sn-base, lead-free hybrid ferroelastic semiconductor, [TPMA]2[SnCl6] (TPMA = benzyl trimethylammonium). It undergoes a high-temperature -3mF-1-type ferroelastic phase transition at 408 K, and intriguingly, its ferroelastic domains can be simultaneously switched under the stimulation of external heat and stress. The ferroelastic phase transition might be derived from the order-disorder transition of organic cations during heating and cooling. Moreover, [TPMA]2[SnCl6] also demonstrates a high-temperature dielectric switching property around 408 K, which has good stability and reproducibility. With those benefits, [TPMA]2[SnCl6] shows great potential in applications such as energy storage devices, optoelectronic devices, shape memory, intelligent switches, and so on.

A ZnIn2S4@ReS2/AgInS2-based photoelectrochemical aptasensor for the ultrasensitive detection of kanamycin.

An ultrasensitive photoelectrochemical (PEC) aptasensor was originally designed by using ZnIn2S4/ReS2 as a photoactive material and AgInS2 as a signal amplifier. The signal amplifier AgInS2 was incubated on the terminal of H-DNA (immobilized on the ZnIn2S4/ReS2/FTO surface), leading to an enhanced photocurrent response. Then, due to the introduction of DNA2, the formation of a double-stranded structure caused AgInS2 to keep away from the electrode surface, and the photocurrent was reduced. In the presence of kanamycin, DNA2 was released from the system due to the competition relationship, and a restored photocurrent response was obtained. The combination of ZnIn2S4/ReS2 and AgInS2 accelerated the electron transfer and enhanced the separation efficiency of photogenerated electron-hole pairs, resulting in an improved performance of the PEC aptasensor, which was capable of accurate and sensitive detection of kanamycin in actual samples.

H/F Substitution Achieved Enantiomeric Organic Inorganic Hybrid Perovskites and Trigonal Structure [DMFP]3(CdBr3)(CdBr4).

Organic-inorganic hybrid perovskites (OIHPs) have been emerging as a hot research topic due to their potential applications in energy storage, semiconductors, and electronic devices. Herein, we systematically investigated the synthesis and phase transition behaviors of the enantiomeric OIHPs, (R) and (S)-N,N-dimethyl-3-fluoropyrrolidinium cadmium bromide ([DMFP][CdBr3]), and the hybrid trigonal structure [DMFP]3 (CdBr3)(CdBr4). The enantiomers have a mirror-symmetric structure and enhanced solid-state phase transition points of 417 and 443 K, in contrast to the nonfluorinated parent compound, N,N-dimethyl-pyrrolidinium cadmium bromide ([DMP][CdBr3], 385 K). Moreover, racemic H/F substitution on the pyrrolidinium cations leads to the formation of a trigonal compound, showing above-room-temperature structural phase transition and dominant ferroelasticity. This work discovers chiral enantiomeric OIHPs through H/F substitution, demonstrating a useful chemical synthesis strategy for exploring novel phase transition materials.

[Multi-component content determination of Dracocephalum tanguticum by quantitative analysis of multi-components by single-marker].

This study aims to establish a method for the simultaneous determination of 7 active components in Dracocephalum tanguticum and to evaluate the quality of medicinal materials from different habitats. The method was established with high performance liquid chromatography(HPLC) and the gradient elution was performed with the mobile phase of acetonitrile-methanol-0.2% phosphoric acid solution at a column temperature of 35 ℃, an injection volume of 15 µL, and a flow rate of 0.6 mL·min~(-1). The detection wavelength was set as 215 nm. With rosmarinic acid as the internal reference, the relative correction factors and the content of other 6 components were calculated. The results were compared with those obtained with the external standard method. The results showed that the samples from Huangzhong county, Qinghai province had the best quality, with the highest content of p-hydroxybenzoic acid, cosmosiin, rosmarinic acid, oleanolic acid, and ursolic acid(9.29, 12.14, 6.02, 3.11, 17.67 mg·g~(-1) respectively). The samples from Chaya county, Tibet autonomous region ranked the second, with the highest content of betulin and betulinic acid(15.53, 7.17 mg·g~(-1), respectively). The method is accurate, reliable, and repeatable and suitable for the simultaneous determination of multiple components in D. tanguticum. The content of functional components varied in the samples from different producing areas and can be used as the indicator for the quality evaluation of medicinal materials.

Dual Breaking of Molecular Orbitals and Spatial Symmetry in an Optically Controlled Ferroelectric.

As particles carry quantified energy, photon radiation enables orbital transitions of energy levels, leading to changes in the spin state of electrons. The resulting switchable structural bistability may bring a new paradigm for manipulating ferroelectric polarization. However, the studies on molecular orbital breaking in the ferroelectric field remain blank. Here, for the first time, a new mechanism of ferroelectrics-dual breaking of molecular orbitals and spatial symmetry, demonstrated in a photochromic organic crystal with light-induced polarization switching, is formally proposed. By alternating the ultraviolet/visible light irradiation, the states of electron spin and the radial distribution p atomic orbitals experience a change, showing a reversible switch from "shoulder-to-shoulder" form to a "head-to-head" form. This reflects a reversible conversion between π and σ bonds, which induces and couples with the variation of spatial symmetry. The intersection of spatial symmetry breaking and molecular orbital breaking in ferroelectrics present in this work will be more conducive to data encryption and anticounterfeiting.

Ferroelectric Phase Transition Driven by Switchable Covalent Bonds.

The mechanism on ferroelectric phase transitions is mainly attributed to the displacive and/or order-disorder transition of internal components since the discovery of the ferroelectricity in 1920, rather than the breaking and recombination of chemical bonds. Here, we demonstrate how to utilize the chemical bond rearrangement in a diarylethene-based crystal to realize the light-driven mm2F1-type ferroelectric phase transition. Such a photoinduced phase transition is entirely driven by switchable covalent bonds with breaking and reformation, enabling the reversible light-controllable ferroelectric polarization switching, dielectric and nonlinear optical bistability. Moreover, light as quantized energy can achieve contactless, nondestructive, and remote-control operations. This work proposes a new mechanism of ferroelectric phase transition, and highlights the significance of photochromic molecules in designing new ferroelectrics for photocontrol data storage and sensing.

[Geochemical Characteristics of Cd in Different Parent Soils in Karst Area and Prediction of Cd Content in Maize].

The naturally high background value region of Cd derived from the weathering of carbonate has received wide attention. Due to the significant difference in soil physicochemical properties, soil Cd content, and bioavailability of different parent materials in the karst area, there are certain limitations in using the total soil Cd content to classify the environmental quality of cultivated land. In this study, surface soil and maize samples of eluvium and alluvial parent material in typical karst areas were collected systematically; the contents of maize Cd, soil Cd, pH, and oxides were analyzed, the Cd geochemical characteristics of different parent soils and the influencing factors of their bioavailability were revealed, and scientific and effective arable land use zoning suggestions based on the prediction model were suggested. The results showed that the physicochemical properties of different parent material soils in the karst area were obviously different. The alluvial parent material soil had low Cd content but high bioavailability, and the maize Cd exceeding rate was high. The maize Cd bioaccumulation factor was significantly negatively correlated with soil CaO, pH, Mn, and TC, and the correlation coefficients were -0.385, -0.620, -0.484, and -0.384, respectively. Compared with the multiple linear regression prediction model, using the random forest model to predict the maize Cd enrichment coefficient had higher accuracy and precision. Furthermore, a new scheme for the safe utilization of cultivated land at the plot scale based on soil Cd and predicted crop Cd content was proposed in this study, making full use of arable land resources to ensure crop safety.

High-T c Single-Component Organosilicon Ferroelectric Crystal Obtained by H/F Substitution.

Organic single-component ferroelectrics are highly desirable for their low molecular mass, light weight, low processing temperature, and excellent film-forming properties. Organosilicon materials with a strong film-forming ability, weather resistance, nontoxicity, odorlessness, and physiological inertia are very suitable for device applications related to the human body. However, the discovery of high-T c organic single-component ferroelectrics has been very scarce, and the organosilicon ones even less so. Here, we used a chemical design strategy of H/F substitution to successfully synthesize a single-component organosilicon ferroelectric tetrakis(4-fluorophenylethynyl)silane (TFPES). Systematic characterizations and theory calculations revealed that, compared with the parent nonferroelectric tetrakis(phenylethynyl)silane, fluorination caused slight modifications of the lattice environment and intermolecular interactions, inducing a 4/mmmFmm2-type ferroelectric phase transition at a high T c of 475 K in TFPES. To our knowledge, this T c should be the highest among the reported organic single-component ferroelectrics, providing a wide operating temperature range for ferroelectrics. Moreover, fluorination also brought about a significant improvement in the piezoelectric performance. Combined with excellent film properties, the discovery of TFPES provides an efficient path for designing ferroelectrics suitable for biomedical and flexible electronic devices.

Remarkable Enhancement of Piezoelectric Performance by Heavy Halogen Substitution in Hybrid Perovskite Ferroelectrics.

Piezoelectric materials that enable electromechanical conversion have great application value in actuators, transducers, sensors, and energy harvesters. Large piezoelectric (d33) and piezoelectric voltage (g33) coefficients are highly desired and critical to their practical applications. However, obtaining a material with simultaneously large d33 and g33 has long been a huge challenge. Here, we reported a hybrid perovskite ferroelectric [Me3NCH2Cl]CdBrCl2 to mitigate and roughly address this issue by heavy halogen substitution. The introduction of a large-size halide element softens the metal-halide bonds and reduces the polarization switching barrier, resulting in excellent piezoelectric response with a large d33 (∼440 pC/N), which realizes a significant optimization compared with that of previously reported [Me3NCH2Cl]CdCl3 (You et al. Science2017, 357, 306-309). More strikingly, [Me3NCH2Cl]CdBrCl2 simultaneously shows a giant g33 of 6215 × 10-3 V m/N, far exceeding those of polymers and conventional piezoelectric ceramics. Combined with simple solution preparation, easy processing of thin films, and a high Curie temperature of 373 K, these attributes make [Me3NCH2Cl]CdBrCl2 promising for high-performance piezoelectric sensors in flexible, wearable, and biomechanical devices.

Axial-Chiral BINOL Multiferroic Crystals with Coexistence of Ferroelectricity and Ferroelasticity.

Chirality exists everywhere from natural amino acids to particle physics. The introduction of point chirality has recently been shown to be an efficient strategy for the construction of molecular ferroelectrics. In contrast to point chirality, however, axial chirality is rarely used to design ferroelectrics so far. Here, based on optically active 1,1'-bi-2-naphthol (BINOL), which has been applied extensively as a versatile chiral reagent in asymmetric catalysis, chiral recognition, and optics, we successfully design a pair of axial-chiral BINOL multiferroics, (R)-BINOL-DIPASi and (S)-BINOL-DIPASi. They experience a 2F1-type full ferroelectric/ferroelastic phase transition at a high temperature of 362 and 363 K, respectively. Piezoelectric force microscopy and polarization-voltage hysteresis loops demonstrate their ferroelectric domains and domain switching, and polarized light microscopy visualizes the evolution of stripe-shaped ferroelastic domains. The axial-chiral BINOL building block promotes the generation of the polar structure and ferroelectricity, and the organosilicon component increases the rotational energy barrier and thus the phase transition temperature. This work presents the first axial-chiral high-temperature multiferroic crystals, offering an efficient path for designing molecular multiferroics through the introduction of axial chirality.

Biferroelectricity of a homochiral organic molecule in both solid crystal and liquid crystal phases.

Ferroelectricity, existing in either solid crystals or liquid crystals, gained widespread attention from science and industry for over a century. However, ferroelectricity has never been observed in both solid and liquid crystal phases of a material simultaneously. Inorganic ferroelectrics that dominate the market do not have liquid crystal phases because of their completely rigid structure caused by intrinsic chemical bonds. We report a ferroelectric homochiral cholesterol derivative, ß-sitosteryl 4-iodocinnamate, where both solid and liquid crystal phases can exhibit the behavior of polarization switching as determined by polarization-voltage hysteresis loops and piezoresponse force microscopy measurements. The unique long molecular chain, sterol structure, and homochirality of ß-sitosteryl 4-iodocinnamate molecules enable the formation of polar crystal structures with point group 2 in solid crystal phases, and promote the layered and helical structure in the liquid crystal phase with vertical polarization. Our findings demonstrate a compound that can show the biferroelectricity in both solid and liquid crystal phases, which would inspire further exploration of the interplay between solid and liquid crystal ferroelectric phases.

The First Chiro-Inositol Organosilicon Ferroelectric Crystal.

Organosilicons have been used extensively in aerospace, electronics, food, medicine and other fields, due to their low viscosity, hydrophobicity, corrosion resistance, non-toxic, and physiologically inert features. Despite extensive interest, however, organosilicon ferroelectric crystals have never been found. Here, by using the chemical design strategy, we successfully obtained a molecular ferroelectric D-chiro-inositol-SiMe3 with polar P43 symmetry, whose spontaneous polarization can be electrically switchable on thin film. The introduction of organosilicon groups endows the thin films with excellent softness, ductility and flexibility (extremely low hardness of 72.8 MPa and small elastic modulus of 5.04 GPa) that are desirable for biomedical and human-compatible applications. As the first case of organosilicon ferroelectric crystal to date, this work offers a new structural paradigm for molecular ferroelectrics, and highlights their potential for flexible bio-electronic applications.

Recurrent Implantation Failure May Be Identified by a Combination of Diagnostic Biomarkers: An Analysis of Peripheral Blood Lymphocyte Subsets.

Background: Recurrent implantation failure (RIF) is a challenge during assisted reproductive technology (ART). In the present study, potential diagnostic biomarkers for the immune status of peripheral blood lymphocyte subsets in patients with RIF were analyzed, with the aim of identifying novel biomarkers that may predict RIF. Methods: A total of 41 participants, including 21 women with RIF and 20 fertile controls, were included in the present study. Functional analysis was performed and the cytokine status of natural killer (NK), T, CD8+ T, T helper (Th), and γδ T cells which are lymphocyte subsets in peripheral blood was measured using flow cytometry. Binary logistic regression analysis adjusted for T follicular helper 1 (Tfh1), Tfh2, Tfh17, and early NK cells was performed to determine the relationship between the peripheral blood lymphocyte subsets and RIF. Potential diagnostic biomarkers were assessed by logistic regression analysis and receiver operating characteristic curves. Results: There were significantly more Tfh1, Tfh17, and NK cells in the RIF group compared with the control group (all P < 0.05). However, the percentage of T, regulatory T (Tregs), and Tfh2 cells, as well as early inhibitory NK cells, was significantly lower in the RIF group compared with the control group (all P < 0.05). Following logistics regression analysis, Treg, Tfh17, and early inhibitory NK cells exhibited significant differences between the two groups. Combination diagnosis using these 3 biomarkers had a higher area under the curve of 0.900 (95% confidence interval: 0.808-0.992, P < 0.001) in the RIF group compared with that in the control group. Conclusion: T, Tregs, Tfh1, Tfh2, Tfh17, NK cells, and early inhibitory NK cells may play important regulatory roles in embryo implantation. The combination of 3 molecular markers (Treg, Tfh17, and early inhibitory NK cells) could provide a high diagnostic value for women with RIF, thus providing novel potential biomarkers for RIF in ART. The present findings could provide a reference either for the clinical treatment of patients with RIF or for future large, well-designed studies.

Unprecedented Ferroelectricity and Ferromagnetism in a Cr2+ -Based Two-Dimensional Hybrid Perovskite.

Organic-inorganic hybrid perovskites (OIHPs) have gained tremendous interest for their rich functional properties. However, the coexistence of more than one of ferroelectricity, ferromagnetism and ferroelasticity has been rarely found in OIHPs. Herein, we report a two-dimensional Cr2+ -based OIHP, [3,3-difluorocyclobutylammonium]2 CrCl4 ([DFCBA]2 CrCl4 ), which shows both ferroelectricity and ferromagnetism. It undergoes a 4/mmmFm type ferroelectric phase transition at a temperature as high as 387 K and shows multiaxial ferroelectricity with a saturate polarization of 2.1 µC cm-2 . It acts as a soft ferromagnet with a Curie temperature of 32.6 K. This work throws light on the exploration of OIHPs with the coexistence of ferroelectricity and ferromagnetism for applications in future multifunctional smart devices.

The Effect of Visual Mnemonics and the Presentation of Character Pairs on Learning Visually Similar Characters for Chinese-As-Second-Language Learners.

This study investigates the effects of visual mnemonics and the methods of presenting learning materials on learning visually similar characters for Chinese-as-second-language (CSL) learners. In supporting CSL learners to build robust orthographic representations in Chinese, addressing the challenges of visual similarity of characters (e.g., and ) is an important issue. Based on prior research on perceptual learning, we tested three strategies that differ in the extent to which they promote interrelated attention to the form and meaning of characters: (1) Stroke Sequence, a form-emphasis strategy, (2) Key-images, a form + meaning strategy utilizing visual code, (3) Pithy Formulas with Key-images, a form + meaning strategy combining visual and verbal codes. A pretest-posttest equivalent-group design was adopted. The independent variables were the learning strategy, the method of presenting character pairs (visually similar vs. dissimilar), and testing time. The dependent variables were learners' proportions of accurate responses to reading and writing Chinese characters through a posttest (immediately performed after learning) and a delayed posttest (1 week after learning); a learner experience survey was also administered to investigate learners' opinions on each strategy. Sixty-six non-beginning learners of Chinese participated; they were randomly assigned to one of the two groups in which participants learned ten characters via the three strategies, respectively, differing between whether the characters were presented in similar pairs or dissimilar pairs. Data were analyzed via three-way ANCOVAs. The Pithy Formulas with Key-images and the Key-images generally yielded higher writing accuracy than Stroke Sequence immediately after learning. Notably, the advantage of the Pithy Formulas with Key-images (verbal and visual) over the Key-images (visual) on writing was specific to the participants that learned with visually similar pairs rather than those that learned with dissimilar pairs. All strategies were effective for reading, yet learners' experience ratings favored the two form + meaning strategies over the strategy that focused primarily on form. Suggestions for future research and pedagogical implications on learning visually similar characters were offered.

Contactless Manipulation of Write-Read-Erase Data Storage in Diarylethene Ferroelectric Crystals.

The optical manipulation of polarization has gained widespread attention because it offers a promising route to new contactless memories and switches. However, the current research basically focuses on the photocontrol of data storage rather than data reading, which cannot realize the whole process of contactless write-read-erase data storage. Here, we present a pair of enantiomorphic diarylethene derivative ferroelectric crystals, showing a light-driven phase transition triggered by photoisomerization between the open and closed forms. Under the visible light, they exhibit a binary-domain state in the open form with white color and the band gap of 3.26 eV, while they show a single-domain state in the closed form with blue color and the band gap of 1.68 eV after UV irradiation of 254/365 nm. In addition to writing and erasing ferroelectric domains with light, we can also use light to read their color to determine the polarization state of domains. Moreover, diarylethene derivatives have better thermal stability, higher photoexcited conversion efficiency, and larger changes of the absorption wavelength between two isomers than those in salicylideneaniline derivatives. This work not only discovers the first diarylethene-based ferroelectric crystals but also successfully realizes completely contactless manipulation of write-read-erase data storage in the organic ferroelectric semiconductors.

Domain memory effect in the organic ferroics.

Shape memory alloys have been used extensively in actuators, couplings, medical guide wires, and smart devices, because of their unique shape memory effect and superelasticity triggered by the reversible martensitic phase transformations. For ferroic materials, however, almost no memory effects have been found for their ferroic domains after reversible phase transformations. Here, we present a pair of single-component organic enantiomorphic ferroelectric/ferroelastic crystals, (R)- and (S)-N-3,5-di-tert-butylsalicylidene-1-(1-naphthyl)ethylamine SA-NPh-(R) and SA-NPh-(S). It is notable that not only can their ferroic domain patterns disappear and reappear during reversible thermodynamic phase transformations, but they can also disappear and reappear during reversible light-driven phase transformations induced by enol-keto photoisomerization, both of which are from P1 to P21 polar space groups. Most importantly, the domain patterns are exactly the same in the initial and final states, demonstrating the existence of a memory effect for the ferroic domains in SA-NPh-(R) and SA-NPh-(S). As far as we are aware, the domain memory effect triggered by both thermodynamic and light-driven ferroelectric/ferroelastic phase transformations remains unexplored in ferroic materials. Thermal and optical control of domain memory effect would open up a fresh research field for smart ferroic materials.

[(Histamine)(18-crown-6)2][BF4]2 is a high-temperature piezoelectric.

We discovered that [(histamine)(18-crown-6)2][BF4]2 is a high-temperature host-guest inclusion complex that presents decent piezoelectric properties (d33 = 5 pC/N), undergoes a phase transition at 406 K, and also possesses potential ferroelectricity. This work provides a new idea for constructing host-guest inclusion piezoelectrics.