Diffusion of precision livestock farming technologies in dairy cattle farms.

The rising global demand for animal products and the growing public concerns about the environment and animal welfare require dairy farms to improve their efficiency and apply more sustainable farming systems. Precision Livestock Farming (PLF) could represent a valuable support in addressing these challenges. In recent years, dairy farms have been modernising and introducing new sensors and automatic systems for managing the herd. However, the diffusion of new technologies in Italian dairy farms is still limited and farmers are reluctant to invest in precision systems. The aim of the study was to investigate the presence of PLF tools in Italian dairy farms, the motivations, benefits and limits of technological investments from the farmers' point of view and the factors affecting the diffusion of technology. From November 2020 to June 2021, an online questionnaire was distributed and 52 responses were obtained. About 79% of the farms were located in Lombardy. The more represented milking system was the conventional milking parlour (73%), followed by automatic milking (19%). The average age of respondents was quite low: 35% of them was less than 40 years old and more than 50% was between 40 and 60. Statistical analyses were performed to evaluate the effects of different factors on the presence of technology at farm. The age of the farmer, the milk production level and the presence of an automatic milking system influenced the technological level of the farm. Precision systems that provide information on animal activity for the management of reproduction and on milk yield and flow are the most popular and are considered among the most useful. Management of reproduction and milk production are the areas where farmers appear to show interest for future investments as well. Younger farmers appear to have implemented more PLF systems than older ones, and they show a propensity to invest in latest generation precision tools. Farmers seem to have a growing interest in PLF, but some limits have been identified: the investment costs, followed by the lack of time to check information from sensor systems and the difficulty in data interpretation. As PLF technologies can play an important role in the development of sustainable, animal-friendly and efficient livestock production, further improvements and efforts are necessary to increase the propensity to PLF of dairy farmers. Results can be useful in the Italian context but also in other countries where dairy farming is rapidly intensifying but PLF is encountering resistance.

Assessment of technical-productive aspects in Italian dairy farms equipped with automatic milking systems: A multivariate statistical analysis approach.

The aim of this study was to assess technical-productive aspects of dairy farms equipped with automatic milking system (AMS) in Northern and Central Italy. A survey was carried out on 62 dairy farms selected through convenience sampling with the following inclusion criteria: adoption of robotic milking for at least 1 yr and ability to provide farm data. Data were collected using a structured questionnaire to obtain a general description of farm characteristics and overall management practices. Through the combination of principal component analysis and k-means cluster analysis, the farms were allocated in 3 clusters. The identified clusters were described and afterward compared using one-way ANOVA or a chi-squared test. The main observed differences between clusters were the average number of lactating cows and AMS installed, average annual milk production, average AMS loading, average annual milk yield per full-time employee, average daily milk yield per cow and AMS, and the average annual veterinary costs per cow. cluster 1 (n = 24) included small-to-medium-sized semi-intensive farms with low AMS loading and low average daily milk yield per cow. In this farm typology, the AMS is not fully used and is likely perceived as a means to improve quality of life rather than profitability. Clusters 2 (n = 31) and 3 (n = 7) included, respectively, small-medium-sized and large intensive farms. These 2 farm typologies are characterized by an intensive approach to dairy cattle breeding, with average higher AMS loading, labor efficiency, and milk yield compared with the farms of cluster 1, likely due to better farm management. This classification could help dairy technicians give farmers customized management advice for the function of the cluster they belong to, and farmers falling in a specific cluster could evaluate whether they are reaching their objectives.

Methods of estimating liner compression.

The aim of this study was to compare 2 methods of measuring overpressure (OP) using a new test device designed to make OP measurements more quickly and accurately. Overpressure was measured with no pulsation (OP np) and with limited pulsation (OP lp) repeatedly on the same cow during a single milking. Each of the 6 liners (3 round liners and 3 triangular liners) used in this study were tested on the same 6 experimental cows. Both OP np and OP lp were measured on all 4 teats of each experimental cow twice for each liner. The order of OP np and OP lp alternated sequentially for each cow test. The OP results for the 6 liners were also compared with liner compression estimated on the same liners with a novel artificial teat sensor (ATS). The OP lp method showed small but significantly higher values than the OP np method (13.9 vs. 13.4 kPa). The OP lp method is recommended as the preferred method as it more closely approximates normal milking condition. Overpressure values decreased significantly between the first and the following measurements, (from 15.0 to 12.4 kPa). We recommend performing the OP test at a consistent time, 1 min after attaching the teatcup to a well-stimulated teat, to reduce the variability produced by OP changing during the peak flow period. The new test device had several advantages over previously published methods of measuring OP. A high correlation between OP and liner compression estimated by the ATS was found, but difficulties were noted when using the ATS with triangular liners.

Evaluation of the performance of the first automatic milking system for buffaloes.

The objective of this study was to evaluate the response of buffaloes to automatic milking, examining the relationships between milking interval, milk production, and milking time for this species. A total of 7,550 milking records from an average of 40 buffaloes milked by an automatic milking system (AMS) were analyzed during a 3-mo experimental period at a commercial farm with Italian Mediterranean buffaloes in southern Italy. Date and time of animal identification, milk yield, milking duration, milking interval, and average milk flow rate were determined for each milking. The results were also used to predict the maximum number of milkings per day and the optimal number of buffaloes per AMS for different levels of milk production. The average interval period between 2 consecutive milkings was 10.3 h [standard deviation (SD) 3.3]. Overall, 3.4 and 25.7% of the milkings had an interval of ≤ 6 h or >12 h, respectively. Milking duration averaged 8.3 min per buffalo per milking (SD 2.7). The average milk flow rate was 1.3 kg/min (SD 0.5) at a milk yield of 2.8 kg per milking (SD 1.4). Assuming that the milking station is occupied 80% of the time, the number of milkings ranged from 136 to 152 per day and the optimal number of buffaloes per AMS ranged from 59 to 66 when the production level increased from 2 to 5 kg of milk per milking. Automatic milking systems are suitable for buffalo, opening new options for the management of dairy buffalo farms.

The O3-Vet project: a veterinary electronic patient record based on the web technology and the ADT-IHE actor for veterinary hospitals.

A veterinary electronic patient record, compliant with the IT standards (HL7, DICOM and IHE), was developed at the School of Veterinary Medicine, University of Milan (Italy) in order to improve the veterinary hospital workflows, making the stored clinical data more homogenous and sharable, thereby increasing the integration with current and future software applications. The system was developed by open-source software in order to reduce the implementation and maintenance costs and to make the system sharable with other veterinary hospitals or research centers without additional costs. The system was tested from May to October 2006. Results show that the majority of the veterinarians involved in the test agreed on the advantages obtained by the use of application software concerning the availability of all the useful clinical data [71.4%], the quality of the diagnostic procedures [78.58%] and the efficiency [85.58%] of hospital activities.