RESUMO
Conventional assumptions about multiphase flow in gas condensate reservoirs often do not correlate with field production. This discrepancy stems from the various mechanisms influencing the multiphase process, which are inadequately represented in numerical models. One of the least understood mechanisms is the influence of the non-equilibrium thermodynamics on the flow in the wellbore region, where the reservoir pressure is below the dew point pressure. To address this problem, experimental and mathematical analyses were conducted using a microfluidic device designed to replicate the flow dynamics in a gas condensate system. The experimental results showed an 11% deviation from the initial pressure of condensate saturation when compared with the conventional assumption of local equilibrium in numerical models. Similarly, there is a 14% deviation between the experimental and simulated volumes of the condensate. These findings underscore the inadequacy of existing models to accurately predict the saturation profile of the condensate phase. A mathematical model based on a relaxation parameter was applied to account for non-equilibrium phase separation and the fog state of the aerosol as observed in the microfluidic experiment. Incorporating a relaxation parameter ( τ ) enhanced the accuracy of the prediction of the initial pressure of the condensate saturation and an improvement in the prediction of the condensate volumes from 76% to 97.2%. Consequently, it provides a valuable framework and insight on the non-equilibrium phase behavior of gas condensate systems under constant flow regimes.
RESUMO
Graphene-based materials play an essential role in a wide range of modern technologies due to their surface properties such as adsorption capacity and controllable wettability, which depend on the production methods. For practical applications, it is crucial to control the surface properties to achieve the desired wetting characteristics, which can be described with the contact angle (CA). Here, we experimentally investigate the wettability properties of the carbon nanowalls and show how to manage a wetting transition from superhydrophobic to superhydrophilic states. A CA of 170° was reached with direct plasma synthesis, while an angle smaller than 20° was achieved during the atmosphere plasma modification. Combining the formation of the surface groups due to the plasma treatment results and the macroscale wetting behavior in terms of the Cassie-Baxter model, we qualitatively explain how the observed wetting enhancement is induced by both controlled chemical and geometrical surface-heterogeneity.
