From Gas Phase Observations to Solid State Reality: The Identification and Isolation of Trinuclear Salicylaldoximato Copper Complexes.

Conditions have been identified in which phenolic aldoximes and ketoximes of the types used in commercial solvent extraction processes can be doubly deprotonated and generate polynuclear Cu complexes with lower extractant:Cu molar ratios than those found in commercial operations. Electrospray mass spectrometry has provided an insight into the solution speciation in extraction experiments and has identified conditions to allow isolation and characterization of polynuclear Cu-complexes. Elevation of pH is effective in enhancing the formation of trinuclear complexes containing planar {Cu3-µ3-O}4+ or {Cu3-µ3-OH}5+ units. DFT calculations suggest that such trinuclear complexes are more stable than other polynuclear species. Solid structures of complexes formed by a salicylaldoxime with a piperidino substituent ortho to the phenolic OH group (L9H2) contain two trinuclear units in a supramolecular assembly, {[Cu3OH(L9H)3(ClO4)](ClO4)} 2, formed by H-bonding between the central {Cu3-µ3-OH}5+ units and oxygen atoms in the ligands of an adjacent complex. Whilst the lower ligand:Cu molar ratios provide more efficient Cu-loading in solvent extraction processes, the requirement to raise the pH of the aqueous phase to achieve this will make it impractical in most commercial operations because extraction will be accompanied by the precipitation (as oxyhydroxides) of Fe(III) which is present in significant quantities in feed solutions generated by acid leaching of most Cu ores.

Proton Chelating Ligands Drive Improved Chemical Separations for Rhodium.

Current methods for the extraction of rhodium carry the highest carbon footprint and worst pollution metrics of all of the elements used in modern technological applications. Improving upon existing methods is made difficult by the limited understanding of the molecular-level chemistry occurring in extraction processes, particularly in the hydrometallurgical separation step. While many of the precious metals can be separated by solvent extraction, there currently exist no commercial extractants for Rh. This is due to its complicated mixed speciation upon leaching into hydrochloric acid, which gives rise to difficulties in designing effective reagents for solvent extraction. Herein we show that the diamidoamine reagent N- n-hexylbis( N-methyl- N- n-octylethylamide)amine transports Rh(III) from aqueous HCl into an organic phase as the monoaquated dianion [RhCl5(H2O)]2- through the formation of an outer-sphere assembly; this assembly has been characterized by experimentation (slope analysis, FT-IR and NMR spectroscopy, EXAFS, SANS, and ESI-MS) and computational modeling. The paper demonstrates the importance of applying a broad range of techniques to obtain a convincing mode of action for the complex processes involved in anion recognition in the solution phase. A consistent and comprehensive understanding of how the ligand operates to achieve Rh(III) selectivity over the competitor anion Cl- has emerged. This knowledge will guide the design of extractants and thus offers promise for improving the sustainability of metal extraction from both traditional mining sources and the recycling of secondary source materials.

Reversible Pressure-Controlled Depolymerization of a Copper(II)-Containing Coordination Polymer.

A unique pressure-induced Cu-N bond breaking/bond forming reaction is reported. The variation of pressure on a single crystal of a one-dimensional copper- (II)-containing coordination polymer (Cu2 L2 (1-methylpiperazine)2 ]n , where H2 L is 1,1'-(1,3-phenylene)-bis(4,4-dimethylpentane-1,3-dione)), was monitored using single crystal X-ray diffraction with the aid of a diamond anvil cell. At a very low elevated pressure (≈0.05 GPa) a remarkable reversible phase change was observed. The phase change results in the depolymerization of the material through the cleavage and formation of axial Cu-N bonds as well as "ring flips" of individual axially coordinated 1-methylpiperazine ligands. Overall, the pressure-induced phase change is associated with a surprising (and non-intuitive) shift in structure-from a 1-dimensional coordination polymer to a discrete dinuclear complex.

Ditopic receptors containing urea groups for solvent extraction of Cu(ii) salts.

The ditopic receptor L3 [1-(2-((7-(4-(tert-butyl)benzyl)-1,4,7,10-tetraazacyclododecan-1-yl)methyl)phenyl)-3-(3-nitrophenyl)urea] containing a macrocyclic cyclen unit for Cu(ii)-coordination and a urea moiety for anion binding was designed for recognition of metal salts. The X-ray structure of [CuL3(SO4)] shows that the sulfate anion is involved in cooperative binding via coordination to the metal ion and hydrogen-bonding to the urea unit. This behaviour is similar to that observed for the related receptor L1 [1-(2-((bis(pyridin-2-ylmethyl)amino)methyl)phenyl)-3-(3-nitrophenyl)urea], which forms a dimeric [CuL1(µ-SO4)]2 structure in the solid state. In contrast, the single crystal X-ray structure of [ZnL3(NO3)2] contains a 1 : 2 complex (metal : anion) where one anion coordinates to the metal and the other is hydrogen-bonded to the urea group. Spectrophotometric titrations performed for the [CuL3(OSMe2)]2+ complex indicate that this system is able to bind a wide range of anions with an affinity sequence: MeCO2- > Cl- > H2PO4- > Br- > NO2- > HSO4- > NO3-. Lipophilic analogues of L1 and L3 extract CuSO4 and CuCl2 from water into chloroform with high selectivity over the corresponding Co(ii), Ni(ii) and Zn(ii) salts.

A Simple Primary Amide for the Selective Recovery of Gold from Secondary Resources.

Waste electrical and electronic equipment (WEEE) such as mobile phones contains a plethora of metals of which gold is by far the most valuable. Herein a simple primary amide is described that achieves the selective separation of gold from a mixture of metals typically found in mobile phones by extraction into toluene from an aqueous HCl solution; unlike current processes, reverse phase transfer is achieved simply using water. Phase transfer occurs by dynamic assembly of protonated and neutral amides with [AuCl4 ](-) ions through hydrogen bonding in the organic phase, as shown by EXAFS, mass spectrometry measurements, and computational calculations, and supported by distribution coefficient analysis. The fundamental chemical understanding gained herein should be integral to the development of metal-recovery processes, in particular through the use of dynamic assembly processes to build complexity from simplicity.

A Comparison of the Selectivity of Extraction of [PtCl6](2-) by Mono-, Bi-, and Tripodal Receptors That Address Its Outer Coordination Sphere.

Extraction and binding studies of [PtCl6](2-) are reported for 24 mono-, bi-, and tripodal extractants containing tris(2-aminoethyl)amine (TREN) or tris(3-aminopropyl)amine (TRPN) scaffolds. These reagents are designed to recognize the outer coordination sphere of [PtCl6](2-) and to show selectivity over chloride anion under acidic conditions. Extraction from 0.6 M HCl involves protonation of the N-center in tertiary amines containing one, two, or three urea, amide, or sulfonamide hydrogen-bond donors to set up the following equilibrium: 2L(org) + 2H(+) + [PtCl6](2-) ⇌ [(LH)2PtCl6](org). All reagents show higher Pt loading than trioctylamine, which was used as a positive control to represent commercial trialkylamine reagents. The loading of [PtCl6](2-) depends on the number of pendant amides in the extractant and follows the order tripodal > bipodal > monopodal, with urea-containing extractants outperforming amide and sulfonamide analogues. A different series of reagents in which one, two, or three of the alkyl groups in tris-2-ethylhexylamine are replaced by 3-N'-hexylpropanamide groups all show a comparably high affinity for [PtCl6](2-) and high selectivity over chloride anion in extractions from aqueous acidic solutions. (1)H NMR titration of three extractants [LH·Cl] with [(Oct4N)2PtCl6] in CDCl3 provides evidence for high selectivity for [PtCl6](2-) over chloride for tri- and bipodal extractants, which show higher binding constants than a monopodal analogue.

Contributions of inner and outer coordination sphere bonding in determining the strength of substituted phenolic pyrazoles as copper extractants.

Alkyl-substituted phenolic pyrazoles such as 4-methyl-2-[5-(n-octyl)-1H-pyrazol-3-yl]phenol (L2H) are shown to function as Cu-extractants, having similar strength and selectivity over Fe(iii) to 5-nonylsalicylaldoxime which is a component of the commercially used ACORGA® solvent extraction reagents. Substitution in the phenol ring of the new extractants has a major effect on their strength, e.g. 2-nitro-4-methyl-6-[5-(2,4,4-trimethylpentyl)-1H-pyrazol-3-yl]phenol (L4H) which has a nitro group ortho to the phenolic hydroxyl group unit and has an extraction distribution coefficient for Cu nearly three orders of magnitude higher than its unsubstituted analogue 4-methyl-6-[5-(2,4,4-trimethylpentyl)-1H-pyrazol-3-yl]phenol (L8H). X-ray structure determinations and density functional theory (DFT) calculations confirm that inter-ligand hydrogen bonding between the pyrazole NH group and the phenolate oxygen atom stabilise the Cu-complexes, giving pseudomacrocyclic structures. Electron-accepting groups ortho to the phenol oxygen atoms buttress the inter-ligand H-bonding, enhancing extractant strength but the effectiveness of this is very dependent on steric factors. The correlation between the calculated energies of formation of copper complexes in the gas phase and the observed strength of comparably substituted reagents in solvent extraction experiments is remarkable. Analysis of the energies of formation suggests that big differences in strength of extractants arise principally from a combination of the effects of the substituents on the ease of deprotonation of the proligands and, for the ortho-substituted ligands, their propensity to buttress inter-ligand hydrogen bonding.

Preorganized tridentate analogues of mixed hydroxyoxime/carboxylate nickel extractants.

A series of 22 tridentate unsaturated mono-anionic ligands having the atom-sequence Y-C[double bond, length as m-dash]C-N=CH-C=C-Z(-1), with Y = N, O, or S and Z = O or S, has been studied to establish whether this backbone could be used to develop strong solvent extractants for nickel(II) which will preferably also show a high selectivity over iron(III) in the pH-dependent process: 2LH(org) + NiSO4 ⇌ [(L)2Ni]org + H2SO4. All are capable of forming octahedral [(L)2Ni] complexes with a mer-arrangement of the YNZ(-1) donor set. X-ray crystal structures of three salicylaldimine proligands derived from 3-bromo-5-t-butyl-2-hydroxybenzaldehyde show these to have pre-organised donor sets in which the three donors are held in an approximately orthogonal arrangement by intramolecular hydrogen bonds. The tautomers observed are dependent on the nature of the Y atom and the extent to which it is favourable for this to form a bonding interaction with the acidic hydrogen atom on the salicylaldimine unit. X-ray crystal structure determinations of seven of the [(L)2Ni] complexes show these to have significantly distorted octahedral coordination geometries which partly account for the proligands proving to be fairly weak Ni-extractants. DFT calculations show that extractant strength is dependent on a combination of the binding strength of the YNZ(-1) donor set to the nickel ion and on the ease of deprotonation of the extractant. On this basis 3-nitro-4-t-octyl-6-(quinolin-8-imino)phenol is predicted, and is found, to be the strongest Ni-extractant. The extractants have low hydrolytic stability, reverting to their aldehyde precursors when solutions in water-immiscible solvents are contacted with aqueous acid, making them poor candidates for development as reagents for nickel recovery based on pH-swing processes of the type shown above.

EPR/ENDOR and Computational Study of Outer Sphere Interactions in Copper Complexes of Phenolic Oximes.

Copper complexes of the phenolic oxime family of ligands (3-X-salicylaldoximes) are used extensively as metal solvent extractants. Incorporation of electronegative substituents in the 3-position, ortho to the phenol group, can be used to buttress the interligand H-bonding, leading to an enhancement in extractant strength. However, investigation of the relevant H-bonding in these complexes can be exceedingly difficult. Here, we have combined EPR, ENDOR, DFT, and X-ray crystallography to study this effect. Analysis of the (1)H ENDOR data revealed a variation in the Cu···H(16) (oxime proton) distance from 2.92 Å for the unsubstituted complex [Cu(L(2))2] to 3.65 Å for the X = CH2N(C6H13)2 substituted complex [Cu(L(3))2]. DFT calculations showed that this variation is caused by changes to the length and strength of the H-bond between the oximic hydrogen and the phenolate oxygen. Noticeable changes to the Cu···H(15) (azomethine proton) distances and the Cu···N bonding parameters were also observed in the two complexes, as revealed through the (N)A and (N)Q ENDOR data. Distortions in the structure of the complex and variations in the oximic proton to phenolate oxygen H-bond strength caused by the substituent (X) were confirmed by DFT and X-ray crystallography. DFT directly evidenced the importance of the interaction between H(16) and the amine nitrogen of CH2N(C6H13)2 in the buttressed complex and indicated that the high strength of this interaction may not necessarily lead to an enhancement of copper extraction, as it can impose an unfavorable geometry in the inner coordination sphere of the complex. Therefore, ENDOR, DFT, and X-ray structural data all indicate that the aminomethyl substituent (X) ortho to the phenolic oxygen atom provides a particularly strong buttressing of interligand H-bonding in these copper complexes and that these outer sphere interactions can significantly influence structure and stability.

Anion Receptor Design: Exploiting Outer-Sphere Coordination Chemistry To Obtain High Selectivity for Chloridometalates over Chloride.

High anion selectivity for PtCl6(2-) over Cl(-) is shown by a series of amidoamines, R(1)R(2)NCOCH2CH2NR(3)R(4) (L1 with R(1) = R(4) = benzyl and R(2) = R(3) = phenyl and L3 with R(1) = H, R(2) = 2-ethylhexyl, R(3) = phenyl and R(4) = methyl), and amidoethers, R(1)R(2)NCOCH2CH2OR(3) (L5 with R(1) = H, R(2) = 2-ethylhexyl and R(3) = phenyl), which provide receptor sites which extract PtCl6(2-) preferentially over Cl(-) in extractions from 6 M HCl solutions. The amidoether receptor L5 was found to be a much weaker extractant for PtCl6(2-) than its amidoamine analogues. Density functional theory calculations indicate that this is due to the difficulty in protonating the amidoether to generate a cationic receptor, LH(+), rather than the latter showing weaker binding to PtCl6(2-). The most stable forms of the receptors, LH(+), contain a tautomer in which the added proton forms an intramolecular hydrogen bond to the amide oxygen atom to give a six-membered proton chelate. Dispersion-corrected DFT calculations appear to suggest a switch in ligand conformation for the amidoamine ligands to an open tautomer state in the complex, such that the cationic N-H or O-H groups are also readily available to form hydrogen bonds to the PtCl6(2-) ion, in addition to the array of polarized C-H bonds. The predicted difference in energies between the proton chelate and nonchelated tautomer states for L1 is small, however, and the former is found in the X-ray crystal structure of the assembly [(L1H)2PtCl6]. The DFT calculations and the X-ray structure indicate that all LH(+) receptors present an array of polarized C-H groups to the large, charge diffuse PtCl6(2-) anion resulting in high selectivity of extraction of PtCl6(2-) over the large excess of chloride.

Catalytic epoxidation by perrhenate through the formation of organic-phase supramolecular ion pairs.

Organic-phase supramolecular ion pair (SIP) host-guest assemblies of perrhenate anions (ReO4(-)) with ammonium amide receptor cations are reported. These compounds act as catalysts for the epoxidation of alkenes by aqueous hydrogen peroxide under biphasic conditions and can be recycled several times with no loss in activity.

Solvent extraction: the coordination chemistry behind extractive metallurgy.

The modes of action of the commercial solvent extractants used in extractive hydrometallurgy are classified according to whether the recovery process involves the transport of metal cations, M(n+), metalate anions, MXx(n-), or metal salts, MXx into a water-immiscible solvent. Well-established principles of coordination chemistry provide an explanation for the remarkable strengths and selectivities shown by most of these extractants. Reagents which achieve high selectivity when transporting metal cations or metal salts into a water-immiscible solvent usually operate in the inner coordination sphere of the metal and provide donor atom types or dispositions which favour the formation of particularly stable neutral complexes that have high solubility in the hydrocarbons commonly used in recovery processes. In the extraction of metalates, the structures of the neutral assemblies formed in the water-immiscible phase are usually not well defined and the cationic reagents can be assumed to operate in the outer coordination spheres. The formation of secondary bonds in the outer sphere using, for example, electrostatic or H-bonding interactions are favoured by the low polarity of the water-immiscible solvents.

Hierarchical assembly of discrete copper(II) metallo-structures from pre-assembled dinuclear (bis-ß-diketonato)metallocycles and flexible difunctional co-ligands.

The sequential interaction of preformed [Cu2(L1)2(THF)2] (where H2L1 is 1,1-(1,3-phenylene)-bis(4,4-dimethylpentane-1,3-dione incorporating a 1,3-phenylene linker between its two ß-diketone domains) and [Cu2(L4)2]·2H2O (where H2L4 is 1,1-(4,4'-oxybiphenylene)-bis(4,4-dimethylpentane-1,3-dione) incorporating a flexible oxybiphenylene linkage between the two ß-diketone groups) with the potentially difunctional aliphatic non-planar co-ligands, N-methylpiperazine (mpip), N,N'-dimethylpiperazine (dmpip) and 1,4-thiomorpholine (thiomorph) is reported. A series of extended molecular assemblies exhibiting a range of di- and tetranuclear assemblies were obtained and their X-ray structures determined. Dinuclear [Cu2(L1)2(mpip)2]·2mpip incorporates two 5-coordinate, square pyramidal metal centres as does tetranuclear [{Cu2(L1)2}2(dmpip)2]·2dmpip. In contrast, dinuclear [Cu2(L1)2(dmpip)4]·dmpip and [{Cu2(L1)2}2(thiomorph)4]·3thiomorph each contain two 5-coordinate and two 6-coordinate centres. Each of [Cu2(L4)2(THF)2]·2THF and Cu2(L4)2(mpip)2]·H2O incorporate only 5-coordinate metal centres, with the latter complex forming a one-dimensional hydrogen bonded ribbon-like structure directed along the crystallographic a-axis. In keeping with the documented tendency for the smallest, least strained assembly to form in supramolecular self-assembly processes, the incorporation of the flexible "oxy" linkage between the 4,4'-linked phenylene rings of H2L3 results in generation of a dinuclear [Cu2L2] species rather than a trinuclear (triangular) [Cu3L3] species of the type formed by the more rigid bis-ß-diketonato ligand analogue in which the biphenylene rings separating the ß-diketone domains are directly coupled in their 4,4' positions.

Exploiting outer-sphere interactions to enhance metal recovery by solvent extraction.

Interactions, particularly hydrogen bonds, between ligands in the outer coordination spheres of metal complexes have a major effect on their stabilities in the hydrocarbon solvents used in commercial solvent extraction and it is now possible to use these interactions to tune the strength and selectivity of extractants.

Outer-sphere coordination chemistry: amido-ammonium ligands as highly selective tetrachloridozinc(II)ate extractants.

Eight new amido functionalized reagents, L(1)-L(8), have been synthesized containing the sequence of atoms R(2)N-CH(2)-NR'-CO-R″, which upon protonation forms a six-membered chelate with a hydrogen bond between the tertiary ammonium N-H(+) group and the amido oxygen atom. The monocationic ligands, LH(+), extract tetrachloridometal(II)ates from acidic solutions containing high concentrations of chloride ions via a mechanism in which two ligands address the "outer sphere" of the [MCl(4)](2-) unit using both N-H and C-H hydrogen bond donors to form the neutral complex as in 2L + 2HCl + MCl(2) ⇌ [(LH)(2)MCl(4)]. The strengths of L(1)-L(8) as zinc extractants in these pH-dependent equilibria have been shown to be very dependent on the number of amide groups in the R(3-n)N(CH(2)NR'COR″)(n) molecules, anti-intuitively decreasing with the number of strong hydrogen bond donors present and following the order monoamides > diamides > triamides. Studies of the effects of chloride concentration on extraction have demonstrated that the monoamides in particular show an unusually high selectivity for [ZnCl(4)](2-) over [FeCl(4)](-) and Cl(-). Hybrid-DFT calculations on the tri-, di-, and monoamides, L(2), L(3), and L(4), help to rationalize these orders of strength and selectivity. The monoamide L(4) has the most favorable protonation energy because formation of the LH(+) cation generates a "chelated proton" structure as described above without having to sacrifice an existing intramolecular amide-amide hydrogen bond. The selectivity of extraction of [ZnCl(4)](2-) over Cl(-), represented by the process 2[(LH)Cl] + ZnCl(4)(2-) ⇌ [(LH)(2)ZnCl(4)] + 2Cl(-), is most favorable for L(4) because it is less effective at binding chloride as it has fewer highly polar N-H hydrogen bond donor groups to interact with this "hard" anion.

Cobalt(III) complexes as functional ligands for metal (oxide) surfaces.

Co(III) polyamine complexes with either two or three labile coordination sites bind strongly to high surface area metal oxides such as goethite or aluminium trihydroxide, and have been shown to act as passivating agents for aluminium flake in aqueous media, in addition to providing a potential method for surface functionalisation.

Design and function of pre-organised outer-sphere amidopyridyl extractants for zinc(II) and cobalt(II) chlorometallates: the role of C-H hydrogen bonds.

Four new sterically hindered pyridines, L(1)-L(4)-containing amido substituents at the 2-position act as efficient solvent extractants for [CoCl(4)](2-) or [ZnCl(4)](2-) from acidic chloride solutions through protonation of the pyridino N-centre to form the neutral outer-sphere complexes [(LH)(2)MCl(4)]. These ionophores show very high selectivity for chlorometallate anions over chloride ion and are readily stripped to liberate the free-metal chlorides without the formation of inner-sphere complexes [ML(2)Cl(2)]. Single-crystal X-ray structure determinations of [(L(2)H)(2)CoCl(4)] and [(L(2)H)(2)ZnCl(4)] (L(2) = 2-(4,6-di-tert-butylpyridin-2-yl)-N,N'-dihexylmalonamide) coupled with (1)H NMR spectroscopy and DFT calculations on L(2)H(+) and other complexes of [ZnCl(4)](2-) confirm that the pyridinium NH group does not address the outer co-ordination sphere of the metallanion, but rather forms a hydrogen bond to the pendant amide groups and thus pre-organizes the ligand to present both C-H and amido N-H hydrogen-bond donors to the [MCl(4)](2-) ions. The selectivity for chlorometallates over chloride ions shown by this class of extractants arises from their ability to present several polarized C-H units towards the charge-diffuse ions [MCl(4)](2-), whereas the smaller, "harder" chloride anion prefers to be associated with the amido N-H hydrogen-bond donors.

Piezochromism in nickel salicylaldoximato complexes: tuning crystal-field splitting with high pressure.

The crystal structures of bis(3-fluoro-salicylaldoximato)nickel(II) and bis(3-methoxy-salicylaldoximato)nickel(II) have been determined at room temperature between ambient pressure and approximately 6 GPa. The principal effect of pressure is to reduce intermolecular contact distances. In the fluoro system molecules are stacked, and the Ni⋅⋅⋅Ni distance decreases from 3.19 Šat ambient pressure to 2.82 Šat 5.4 GPa. These data are similar to those observed in bis(dimethylglyoximato)nickel(II) over a similar pressure range, though contrary to that system, and in spite of their structural similarity, the salicyloximato does not become conducting at high pressure. Ni-ligand distances also shorten, on average by 0.017 and 0.011 Šfor the fluoro and methoxy complexes, respectively. Bond compression is small if the bond in question is directed towards an interstitial void. A band at 620 nm, which occurs in the visible spectrum of each derivative, can be assigned to a transition to an antibonding molecular orbital based on the metal 3d(x(2)-y(2)) orbital. Time-dependent density functional theory calculations show that the energy of this orbital is sensitive to pressure, increasing in energy as the Ni-ligand distances are compressed, and consequently increasing the energy of the transition. The resulting blueshift of the UV-visible band leads to piezochromism, and crystals of both complexes, which are green at ambient pressure, become red at 5 GPa.

Linking [M(III)3] triangles with "double-headed" phenolic oximes.

Strapping two salicylaldoxime units together with aliphatic α,Ω-aminomethyl links in the 3-position gives ligands which allow the assembly of the polynuclear complexes [Fe(7)O(2)(OH)(6)(H(2)L1)(3)(py)(6)](BF(4))(5)·6H(2)O·14MeOH (1·6H(2)O·14MeOH), [Fe(6)O(OH)(7)(H(2)L2)(3)](BF(4))(3)·4H(2)O·9MeOH (2·4H(2)O·9MeOH) and [Mn(6)O(2)(OH)(2)(H(2)L1)(3)(py)(4)(MeCN)(2)](BF(4))(5)(NO(3))·3MeCN·H(2)O·5py (3·3MeCN·H(2)O·5py). In each case the metallic skeleton of the cluster is based on a trigonal prism in which two [M(III)(3)O] triangles are tethered together via three helically twisted double-headed oximes. The latter are present as H(2)L(2-) in which the oximic and phenolic O-atoms are deprotonated and the amino N-atoms protonated, with the oxime moieties bridging across the edges of the metal triangles. Both the identity of the metal ion and the length of the straps connecting the salicylaldoxime units have a major impact on the nuclearity and topology of the resultant cluster, with, perhaps counter-intuitively, the longer straps producing the "smallest" molecules.

Structural, magnetic, and electronic properties of phenolic oxime complexes of Cu and Ni.

Square planar complexes of the type Ni(L(1))(2), Ni(L(2))(2), Cu(L(1))(2), and Cu(L(2))(2), where L(1)H = 2-hydroxy-5-t-octylacetophenone oxime and L(2)H = 2-hydroxy-5-n-propylacetophenone oxime, have been prepared and characterized by single-crystal X-ray diffraction, cyclic voltammetry, UV/vis spectroscopy, field-effect-transistor measurements, density functional theory (DFT) and time-dependent DFT (TDDFT) calculations, and, in the case of the paramagnetic species, electron paramagnetic resonance (EPR) and magnetic susceptibility. Variation of alkyl groups on the ligand from t-octyl to n-propyl enabled electronic isolation of the complexes in the crystal structures of M(L(1))(2) contrasting with π-stacking interactions for M(L(2))(2) (M = Ni, Cu). This was evidenced by a one-dimensional antiferromagnetic chain for Cu(L(2))(2) but ideal paramagnetic behavior for Cu(L(1))(2) down to 1.8 K. Despite isostructural single crystal structures for M(L(2))(2), thin-film X-ray diffraction and scanning electron microscopy (SEM) revealed different morphologies depending on the metal and the deposition method (vapor or solution). The Cu complexes displayed limited electronic interaction between the central metal and the delocalized ligands, with more mixing in the case of Ni(II), as shown by electrochemistry and UV/vis spectroscopy. The complexes M(L(2))(2) showed poor charge transport in a field-effect transistor (FET) device despite the ability to form π-stacking structures, and this provides design insights for metal complexes to be used in conductive thin-film devices.