Microplastic accumulation in sewer sediments and its potential entering the environment via combined sewer overflows: a study case in Paris.

During wet weather events, combined sewer overflows (CSOs) transfer large amount of particulate matter and associated pollutants into surrounding water bodies, thereby deteriorating the recipients' ecological health. Resuspension of sewer sediments during these events contributes significantly to pollution level of these discharges. However, how much this in-sewer process contributes to CSOs' quality regarding microplastic (MP) pollution is little known. Therefore, an investigation on sewer deposits inside the Parisian combined sewer network was carried out. The study found high MP concentrations stored in this matrix, ranging from 5 × 103 to 178 × 103 particle/kg dry weight. Polymer composition is similar to what found in raw wastewater, containing a high proportion of polyethylene and polypropylene. Thus, the results indicated the persistence of MPs in sewer network during transport during dry weather periods to treatment facilities. Once resuspension of sewer deposits happens, MPs can be released into water flow and get discharged along with CSOs. This highlights another potential pathway of MPs into freshwater environment.

COVID lockdown significantly impacted microplastic bulk atmospheric deposition rates.

Here, microplastic atmospheric deposition data collected at an urban site during the French national lockdown of spring 2020 is compared to deposition data from the same site in a period of normal activity. Bulk atmospheric deposition was collected on the vegetated roof of a suburban campus from the Greater Paris and analysed for microplastics using a micro-FTIR imaging methodology. Significantly lower deposition rates were measured overall during the lockdown period (median 5.4 MP m-2.d-1) than in a period of normal activity in spring 2021 (median of 29.2 MP m-2.d-1). This difference is however not observed for the smallest microplastic size class. The dominant polymers identified were PP, followed by PE and PS. Precipitation alone could not explain the differences between the two campaigns, and it is suggested that the temporary drop in human activity during lockdown is the primary cause of the reduced deposition rates. This study provides novel insight on the immediate impact of human activities on atmospheric microplastics, thus enhancing the global understanding on this topic.

Integration of electrochemical processes in a treatment system for landfill leachates based on a membrane bioreactor.

The use of electrocoagulation (EC) and anodic oxidation (AO) processes was studied for improving a treatment system for landfill leachates based on a membrane bioreactor (MBR) and a nanofiltration step. The main limitation of the current full-scale system is related to the partial removal of organic compounds that leads to operation of the nanofiltration unit with a highly concentrated feed solution. Application of the EC before the MBR participated in partial removal of the organic load (40 %) with limited energy consumption (2.8 kWh m-3) but with additional production of iron hydroxide sludge. Only AO allowed for non-selective removal of organic compounds. As a standalone process, AO would require a sharp increase of the energy consumption (116 kWh for 81 % removal of total organic carbon). But using lower electric charge and combining AO with EC and MBR processes would allow for achieving high overall removal yields with limited energy consumption. For example, the overall removal yield of total organic carbon was 65 % by application of AO after EC, with an energy consumption of 21 kWh m-3. Results also showed that such treatment strategy might allow for a significant increase of the biodegradability of the effluent before treatment by the MBR. The MBR might then be dedicated to the removal of the residual organic load as well as to the removal of the nitrogen load. The data obtained in this study also showed that the lower electric charge required for integrating AO in a coupled process would allow for strongly decreasing the formation of undesired by-products such as ClO3- and ClO4-.

Macrolitter dataset from a highly frequented roadway in Nantes, France.

Land-based sources of riverine macrolitter are now recognized as a major concern, but few field data on litter amount, composition and sources are available. This is especially the case for macrolitter hotspots like high frequented roadways that could generate large amount of macrolitter potentially reaching rivers. This dataset provides macrolitter amount and composition over one year from a retention pond collecting stormwater and carried macrolitter from a 800 m portion of a highly frequented roadway (around 90,000 vehicles per day). The typology of macrolitter was defined using the TSG-ML/OSPAR classifications. A total of 36,439 items in which 84% of plastics were individually counted, classified and weighted by category for a total mass of 88.5 kg (60% of plastics). Raw data are available in Mendeley Data (DOI:10.17632/t6ryv6crjd.4). Top 10 items represent 92% by count of the total with plastic fragments (31%), cigarette butts (18%), EPS fragments (17%) or foam packaging (11%) as most common items. Top 10 items represent 72% by mass of the total with plastic fragments (24%) and Cardboard (13%) as most common items, followed by foam packaging (6%), wood fragments (6%), industrial plastic sheets (5%), rubber fragments (4%) and EPS fragments (4%). More than 94% of plastic items are below 1.9 g/item. This dataset is related to the research paper Amount, composition and sources of macrolitter from a highly frequented roadway.

Microplastic and microfiber fluxes in the Seine River: Flood events versus dry periods.

Studies on the influence of hydrodynamic conditions on anthropogenic microfiber (MF) and microplastic (MP) distributions in freshwater environments are sparse. In this study, we evaluated the influence of urbanisation gradient on the spatial variability of MFs and MPs. Temporal variability was also assessed by comparing the concentrations and fluxes of MFs and MPs under low flow conditions with those during the January-February 2018 flood event. For each period, Seine river water was collected upstream and downstream of Greater Paris and filtered through an 80 µm net at three different sampling sites. MFs were counted using a stereomicroscope, while MPs were analysed using micro-Fourier transform infrared spectroscopy coupled with siMPle analysis software. The highest concentrations of MFs and MPs were reported at the furthest downstream sites during both periods. However, high water flowrates and urbanisation gradient did not significantly impact MF and MP concentrations, sizes, or polymer distributions. The median MF and MP concentrations were 2.6 and 15.5 items/L and their interquartile ranges were 1.6 and 4.9 items/L (n = 10), respectively, illustrating relatively stable concentrations in spite of the urbanisation gradient and variations in the flowrate. In contrast to the concentration, size, and polymer distribution characteristics, MP mass fluxes were strongly affected by river flow. MF and MP fluxes show increases in the number and mass of particles from upstream to downstream. The downstream site presents high MP mass fluxes, which range between 924 and 1675 tonnes/year. These results may indicate significant MP inputs from the Paris Megacity through wastewater treatment plant effluents and untreated stormwater. The January-February 2018 flood event, which represented 14.5% of the year (in terms of time), contributed 40% of the yearly MP mass fluxes. Thus, flood events contribute strongly to MP fluxes.

Microplastics and microfibers in urban runoff from a suburban catchment of Greater Paris.

Microplastics (MPs) and microfibers (MFs) in stormwater have been poorly investigated. Data on their intra and inter rain events variability over time are still sparse. For the first time, the variability of microlitter concentrations in stormwater has been studied. MF and MP concentrations were investigated in stormwater runoff at the outlet of the suburban catchment at Sucy-en-Brie (a suburb of Paris, France), during four rain events. Median MF and MP concentrations were 1.9 and 29 items/L, with an interquartile range of 2.3 and 36 items/L, respectively (N = 18). A different pattern was observed between MFs and MPs. While no relationship or trends were observed for MFs, the highest MP concentrations were observed before the flow rate peak of the rain events. This could indicate a difference in the behaviour between MFs and MPs. We estimated the median MP mass concentration to be 56 µg/L with an interquartile range of 194 µg/L, whereas the mass concentration of macroplastics was estimated to be 31 µg/L with an interquartile range of 22 µg/L at the same sampling site, in a previous study. For this sampling site, MPs and macroplastics have the same order of magnitude. This study may have strong implications on microplastic assessment in urban waters.

A microfluidic chip enables fast analysis of water microplastics by optical spectroscopy.

Microplastics contaminating drinking water is a growing issue that has been the focus of a few recent studies, where a major bottleneck is the time-consuming analysis. In this work, a micro-optofluidic platform is proposed for fast quantification of microplastic particles, the identification of their chemical nature and size, especially in the 1-100 µm size range. Micro-reservoirs ahead of micro-filters are designed to accumulate all trapped solid particles in an ultra-compact area, which enables fast imaging and optical spectroscopy to determine the plastic nature and type. Furthermore, passive size sorting is implemented for splitting the particles according to their size range in different reservoirs. Besides, flow cytometry is used as a reference method for retrieving the size distribution of samples, where chemical nature information is lost. The proof of concept of the micro-optofluidic platform is validated using model samples where standard plastic particles of different size and chemical nature are mixed.

Abundance, composition and fluxes of plastic debris and other macrolitter in urban runoff in a suburban catchment of Greater Paris.

Stormwater possibly represents a significant input for plastic debris in the environment; however, the quantification and composition of plastic debris and other macrolitter in stormwater are not available in literature and the amounts discharged into freshwater have been poorly investigated. To obtain a better understanding, the occurrence, abundance, and composition of the macrolitter in screened materials from stormwater were investigated at a small residential suburban catchment (Sucy-en-Brie, France) in Greater Paris. The macrolitter, particularly the plastic debris, was sorted, weighed, and classified based on the OSPAR methodology. On average, plastics accounted for at least 62% in number and for 53% of the mass of all the anthropogenic waste found in the screened materials. The most common items were plastic bags or films, crisp or sweet packets, cigarette butts, plastic fragments of unknown origin, garbage bags or garbage bag strings, foil wrappers, tampon applicators, plastic cups, and medical items such as bandages. Plastic debris concentrations in runoff water ranged between 7 and 134 mg/m3 (i.e. 0.4-1.7 kg.yr-1.ha-1 or 4.8-18.8 g.yr-1.cap-1). When extrapolated to the Greater Paris area, the estimated amount of plastic debris discarded into the environment through untreated stormwater of separate sewer systems ranges from 8 to 33 tons.yr-1.

Impacts of organic matter digestion protocols on synthetic, artificial and natural raw fibers.

As microplastic studies grow, environmental concerns of all kinds of fibers are currently investigated. However, there is a gap in data regarding the impacts of digestion protocols on fibers integrity. This work focuses on the impact of five commonly used digestion protocols on the seven most produced fibers in traditional textile: three synthetics (polyamide 6.6 (PA 6.6), polyethylene terephthalate (PET) and polyacrylonitrile (acrylic)), one artificial (viscose), two vegetal natural (cotton and flax) and one animal natural (wool). The protocols to be tested were selected based on the literature: 10% KOH at 40 °C for 24 h; 10% KOH at 60 °C for 24 h; diluted NaClO at room temperature (~20 °C) for 15 h; 30% H2O2 at 40 °C for 48 h; Fenton's reagent with 30% H2O2 for 2 h at room temperature (~20 °C). The fibers were characterized before and after digestion. The effects of those protocols on fibers integrity have been assessed using several of their performance parameters. High degradations were observed for PET with 10% KOH 60 °C whereas almost no impact was observed at 40 °C. H2O2 digestion affects mechanical properties of different fibers, particularly PA 6.6. Both protocols should be avoided for synthetic fibers analyses. NaClO digestion mainly affected flax and viscose. Diluted NaClO at room temperature for 15 h, 10% KOH at 40 °C for 24 h and Fenton's reagent are more appropriate to maintain fibers integrity.

A first estimation of uncertainties related to microplastic sampling in rivers.

Many studies have been conducted to quantify microplastic contamination, but only a few of them have actually the sampling methodology and associated uncertainties. This study seeks to examine the influence of sampling strategy on the confidence interval of river microplastic estimates. 16 samples are collected in the Gave de Pau River (southwestern France) during a three-hour window with a 330-µm mesh size net. Three different exposure times (3, 5 and 7 min) allow for a respective filtration rate by the net of 35.6 m3 (3 samples), 59.4 m3 (10 samples), and 83.2 m3 (3 samples) of water. Organic matter contained in samples is removed by hydrogen peroxide oxidation. The plastic particles are then counted and classified under a binocular microscope. The microplastic concentrations vary between 2.64 and 4.24 microplastics/m3, with a median value of 3.26 microplastics/m3. Statistical analysis does not show differences in microplastic concentrations for the three exposure times. This result seems to demonstrate that a filtration of approx. 35 m3 of water is sufficient under similar conditions (similar flow condition and degree of microplastic contamination) and can help reduce sampling and sample processing time. Other analyses, based on 10 filtrations of 59.4 m3, show that the higher the number of samples, the lower the confidence interval. For triplicates, the mean confidence interval reaches 15% of the median value. Thus, collecting triplicates would seem to offer a reasonable optimum, in combining an acceptable error percentage and time efficiency. These results might depend on the microplastic load of the river, therefore making it necessary to conduct similar analyses on other rivers. This study reports for the first time uncertainties related to microplastic sampling in rivers. Such findings will serve to set up long term monitoring, highlight spatial differences between sites and improve the accuracy of annual microplastic fluxes in rivers.

Temporal dynamic of anthropogenic fibers in a tropical river-estuarine system.

Anthropogenic fibers, gathering synthetic fibers, artificial fibers and natural fibers are ubiquitous in the natural environment. Tremendous concentrations of anthropogenic fibers were previously measured in the tropical Saigon River (Vietnam), i.e. a river impacted by textile and apparel industries. In the present study, we want to examine the role of contrasted seasonal variation (e.g., dry and rainy seasons), via the rainfall and monthly water discharges, and of water's physico-chemical conditions on the concentrations of anthropogenic fibers in the surface water. The one year and half monthly survey evidenced that concentrations of anthropogenic fibers varied from 22 to 251 items L-1 and their variations were not related to rainfall, water discharge or abiotic factors. However, their color and length distribution varied monthly suggesting variations in sources and sinks. Based on the 2017 survey, we estimated an annual emission of anthropogenic fibers from the river to the downstream coastal zone of 115-164 × 1012 items yr-1.

Plastic Particle Ingestion by Wild Freshwater Fish: A Critical Review.

Plastic pollution, especially microplastics (MP) pollution, is a hot topic in both mainstream media and scientific literature. Although rivers are potentially the major transport pathway of this pollution to the sea, plastic contamination in freshwater bodies is comparatively understudied. Microplastic pollution in freshwater fish is of growing interest, and while few studies exist, discrepancies do occur in the sampling, extraction, and identification of MP and in the expression of the results. Even though those differences hamper comparisons between some studies, a comparative work has been performed to identify the factors influencing MP ingestion by fish and consequently to target potential ecological traits that can be used to monitor species. Monitoring plastic ingested by fish will give relevant ecological information on MP pollution. This review focuses on MP ingestion by wild freshwater and estuarine fish. In addition to providing an overview of the existing data concerning contamination levels in wild freshwater fish, we aimed to (1) propose several overall recommendations on the methodologies applicable to all biota, (2) compare MP contamination levels in fish and in their environment, and (3) determine which parameters could help to define fish species for monitoring.

Plastic debris dataset on the Seine river banks: Plastic pellets, unidentified plastic fragments and plastic sticks are the Top 3 items in a historical accumulation of plastics.

Plastic pollution in oceans and rivers is of high concern because of its persistence in the environment and its potential impact on ecosystems. However, there is a specific lack of data in rivers. Here we present data from the Seine river banks in a historical polluted shore. Data were classified using international MSFD and OSPAR classifications. The sampled site is a quadrat of 1 m2 located downstream in the estuary in a visual maximum along a 1 km shore covered by plastics. A total of 20,259 plastic debris were individually counted, classified and weighted by category for a total mass higher than 4 kg. Half of the plastic debris in number are represented by preproduction pellets.

Anthropogenic particles in the stomach contents and liver of the freshwater fish Squalius cephalus.

Anthropogenic particles (APs) are a very broad category of particles produced directly or indirectly by human activities. Their ingestion by biota is well studied in the marine environment. In contrast, studies on AP ingestion in wild freshwater organisms are scarce despite high contamination levels in some rivers and lakes. In this study, we aimed to evaluate the ingestion of APs and the possible occurrence of APs in the liver and muscle of a freshwater fish, Squalius cephalus, from the Parisian conurbation. After isolation, the particles were analyzed using Raman spectroscopy. In sixty stomachs, eighteen APs were found, half of which were plastics and the other half were dyed particles. Twenty-five percent of sampled individuals had ingested at least one AP. The mean length of the APs was 2.41 mm. No significant difference was found between the sites upstream and downstream of Paris. Additionally, 5% of sampled livers contained one or more APs, which were characterized as microplastics (MPs). No APs were found in the muscle tissue. The majority of APs isolated from stomach contents were fibers, which is similar to the findings of a previous river contamination study. This highlights that fish could be more exposed to fibers than previously thought and that more studies on the impacts of fiber ingestion are required. Despite their low occurrence, MPs are reported, for the first time, in the liver of a wild freshwater fish species. While the pathways and impacts are still unknown, MPs also occur in liver of marine mollusks and fish. Physiological in vitro studies are needed to better evaluate the impacts of such phenomena.

Macroplastic and microplastic contamination assessment of a tropical river (Saigon River, Vietnam) transversed by a developing megacity.

Both macroplastic and microplastic contamination levels were assessed for the first time in a tropical river estuary system, i.e. the Saigon River, that traverses a developing South East Asian megacity, i.e. Ho Chi Minh City, Vietnam. The analysis of floating debris collected daily on the Nhieu Loc - Thi Nghe canal by the municipal waste management service shows that the plastic mass percentage represents 11-43%, and the land-based plastic debris entering the river was estimated from 0.96 to 19.91 g inhabitant-1 d-1, namely 350 to 7270 g inhabitant-1 yr-1. Microplastics were assessed in the Saigon River and in four urban canals by sampling bulk water for anthropogenic fiber analysis and 300 µm mesh size plankton net exposition for fragment analysis. Fibers and fragments are highly concentrated in this system, respectively 172,000 to 519,000 items m-3 and 10 to 223 items m-3. They were found in various colors and shapes with smallest size and surface classes being predominant. The macroplastics and fragments were mainly made of polyethylene and polypropylene while the anthropogenic fibers were mainly made of polyester. The relation between macroplastic and microplastic concentrations, waste management, population density and water treatment are further discussed.

Contamination of soils by metals and organic micropollutants: case study of the Parisian conurbation.

Soils are playing a central role in the transfer and accumulation of anthropogenic pollutants in urbanized regions. Hence, this study aimed at examining the contamination levels of selected soils collected within and around the Paris conurbation (France). This also evaluated factors controlling contamination. Twenty-three trace and major elements as well as 82 organic micropollutants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalates (PAEs), polybrominated diphenyl ethers (PBDEs), alkylphenols (APs), and perfluoroalkylated substances (PFASs) were analyzed. Results reinforced the concern raised by the occurrence and levels of metals such as Zn, Pb, Cu, and Hg, identified as metallic markers of anthropogenic activities, but also pointed out the ubiquitous contamination of soils by organic micropollutants in the 0.2-55,000-µg/kg dw range. For well-documented compounds like PAHs, PCBs, and to a lesser extent PBDEs, contents were in the range of background levels worldwide. The pollutant stock in tested soil was compared to the annual atmospheric input. For PAHs; Pb; and to a lesser extent Zn, Cu, Cd, Hg, Sb, PAEs, and APs, a significant stock was observed, far more important than the recent annual atmospheric fluxes. This resulted from both (i) the persistence of a fraction of pollutants in surface soils and (ii) the cumulative atmospheric inputs over several decades. Regarding PBDEs and PFASs, stronger atmospheric input contributions were observed, thereby highlighting their recent dispersal into the environment.

Synthetic and non-synthetic anthropogenic fibers in a river under the impact of Paris Megacity: Sampling methodological aspects and flux estimations.

Processed fibers are highly present in our daily life and can be either natural, artificial (regenerated cellulose) and synthetic (made with petrochemicals). Their widespread use lead inevitably to a high contamination of environment. Previous studies focus on plastic particles regardless of their type or shape as long as they are comprised between 330µm and 5mm. On the contrary, this study focuses exclusively on fibers using a smaller mesh size net (80µm) to sample freshwater. Moreover, all processed organic fibers are considered, irrespective to their nature. First, the short term temporal variability of the fibers in the environment was assessed. While exposing the sampling net during 1min a coefficient of variation of approx. 45% (with n=6) was determined. It was of only 26% (n=6) when the exposure was of 3min. The assessment of the distribution through the section showed a possible difference in concentrations between the middle of the water surface and the river banks which could be attributed to the intense river traffic within the Paris Megacity. The vertical variability seems negligible as turbulence and current conditions homogenize the distribution of the fibers. A monthly monitoring showed concentrations of 100.6±99.9fibers·m-3 in the Marne River and of: 48.5±98.5, 27.9±26.3, 27.9±40.3 and 22.1±25.3fibers·m-3 from the upstream to downstream points in the Seine River. Once these concentrations are converted into fluxes, it seems that the impact generated by the Paris Megacity cannot be distinguished. Investigations on the role of sedimentation and deposition on the banks are required. This study helped fill some major knowledge gaps regarding the fibers in rivers, their sampling, occurrence, spatial-temporal distribution and fluxes. It is encouraged that future studies include both synthetic and none synthetic fibers.

On the successful use of a simplified model to simulate the succession of toxic cyanobacteria in a hypereutrophic reservoir with a highly fluctuating water level.

Many freshwater bodies worldwide that suffer from harmful algal blooms would benefit for their management from a simple ecological model that requires few field data, e.g. for early warning systems. Beyond a certain degree, adding processes to ecological models can reduce model predictive capabilities. In this work, we assess whether a simple ecological model without nutrients is able to describe the succession of cyanobacterial blooms of different species in a hypereutrophic reservoir and help understand the factors that determine these blooms. In our study site, Karaoun Reservoir, Lebanon, cyanobacteria Aphanizomenon ovalisporum and Microcystis aeruginosa alternatively bloom. A simple configuration of the model DYRESM-CAEDYM was used; both cyanobacteria were simulated, with constant vertical migration velocity for A. ovalisporum, with vertical migration velocity dependent on light for M. aeruginosa and with growth limited by light and temperature and not by nutrients for both species. The model was calibrated on two successive years with contrasted bloom patterns and high variations in water level. It was able to reproduce the measurements; it showed a good performance for the water level (root-mean-square error (RMSE) lower than 1 m, annual variation of 25 m), water temperature profiles (RMSE of 0.22-1.41 °C, range 13-28 °C) and cyanobacteria biomass (RMSE of 1-57 µg Chl a L-1, range 0-206 µg Chl a L-1). The model also helped understand the succession of blooms in both years. The model results suggest that the higher growth rate of M. aeruginosa during favourable temperature and light conditions allowed it to outgrow A. ovalisporum. Our results show that simple model configurations can be sufficient not only for theoretical works when few major processes can be identified but also for operational applications. This approach could be transposed on other hypereutrophic lakes and reservoirs to describe the competition between dominant phytoplankton species, contribute to early warning systems or be used for management scenarios.

A first overview of textile fibers, including microplastics, in indoor and outdoor environments.

Studies about microplastics in various environments highlighted the ubiquity of anthropogenic fibers. As a follow-up of a recent study that emphasized the presence of man-made fibers in atmospheric fallout, this study is the first one to investigate fibers in indoor and outdoor air. Three different indoor sites were considered: two private apartments and one office. In parallel, the outdoor air was sampled in one site. The deposition rate of the fibers and their concentration in settled dust collected from vacuum cleaner bags were also estimated. Overall, indoor concentrations ranged between 1.0 and 60.0 fibers/m3. Outdoor concentrations are significantly lower as they range between 0.3 and 1.5 fibers/m3. The deposition rate of the fibers in indoor environments is between 1586 and 11,130 fibers/day/m2 leading to an accumulation of fibers in settled dust (190-670 fibers/mg). Regarding fiber type, 67% of the analyzed fibers in indoor environments are made of natural material, primarily cellulosic, while the remaining 33% fibers contain petrochemicals with polypropylene being predominant. Such fibers are observed in marine and continental studies dealing with microplastics. The observed fibers are supposedly too large to be inhaled but the exposure may occur through dust ingestion, particularly for young children.

Modelagem da Lagoa da Pampulha: uma ferramenta para avaliar o impacto da bacia hidrográfica na dinâmica do fitoplâncton / Modelling Lake Pampulha: a tool for assessing the catchment area impacts on the phytoplankton dynamics

RESUMO No processo de urbanização, o aumento na proporção de superfícies impermeabilizadas e as mudanças no uso do solo são responsáveis por maiores volumes e velocidades do escoamento superficial, refletindo em uma maior capacidade de arraste e em um maior aporte de nutrientes nos corpos d'água receptores. O objetivo deste trabalho foi implementar uma ferramenta matemática capaz de reproduzir o impacto de mudanças na bacia hidrográfica sobre a dinâmica do fitoplâncton em um lago urbano. Neste artigo são apresentados o desenvolvimento e os resultados de um modelo integrado constituído de um modelo hidrológico, para simular vazões escoadas em uma bacia hidrográfica, e de um modelo hidrodinâmico e ecológico, para simular a biomassa fitoplanctônica em um corpo d'água urbano. A Lagoa da Pampulha (Belo Horizonte, Minas Gerais), escolhida como estudo de caso, foi intensamente monitorada, assim como sua bacia de drenagem, entre outubro de 2011 e junho de 2013. Os dados obtidos foram utilizados para calibrar e validar ambos os modelos. Os resultados obtidos com o modelo hidrológico mostraram-se coerentes com as medidas realizadas em campo (o coeficiente de Nash variou entre 0,70 e 0,88). O modelo da lagoa representou corretamente a evolução da comunidade fitoplanctônica (erro médio absoluto normalizado: 0,25-0,42 e o coeficiente de Pearson: 0,82-0,89; p<0,0001). O monitoramento e a modelagem da lagoa mostraram que a proliferação de cianobactérias é bastante perturbada pelas desestratificações térmicas que ocorrem na lagoa em virtude de eventos meteorológicos. A ferramenta de simulação desenvolvida possui potencial para avaliar diferentes cenários de mudança das condições climáticas e das características da bacia, podendo auxiliar na gestão dos corpos d'água situados em meio urbano.

ABSTRACT In urban areas the increasing imperviousness is responsible for rising runoff volume and speed, leading to a greater capacity to load nutrients and pollutants into reservoirs. In order to study the impacts of catchment changes on the phytoplankton dynamics in urban lakes, a modelling approach in which a hydrological model is connected to an ecological lake model is proposed for Lake Pampulha (Brazil). In this paper we present the methodology used to link both models. Lake Pampulha and its catchment area were intensively monitored between October 2011 and June 2013 in order to provide data for the calibration and validation of both models. The results of the hydrologic model showed good agreement with the in situ measurements, and the Nash coefficient ranged from 0.70 to 0.88. The lake ecological model have successfully represented the cyanobacteria dynamics (normalized mean average error: 0.25-0.42, Pearson coefficient: 0.82-0.89, p<0.0001). Monitoring and modelling showed that cyanobacteria blooms are quite disturbed by water column mixing caused by rain events. The mathematical tool developed here can be used to assess different scenarios of climate changes or catchment area changes and can be very helpful for the management of urban water resources.