Toward Smart Biomimetic Apatite-Based Bone Scaffolds with Spatially Controlled Ion Substitutions.

Biomimetic apatites exhibit a high reactivity allowing ion substitutions to modulate their in vivo response. We developed a novel approach combining several bioactive ions in a spatially controlled way in view of subsequent releases to address the sequence of events occurring after implantation, including potential microorganisms' colonization. Innovative micron-sized core-shell particles were designed with an external shell enriched with an antibacterial ion and an internal core substituted with a pro-angiogenic or osteogenic ion. After developing the proof of concept, two ions were particularly considered, Ag+ in the outer shell and Cu2+ in the inner core. In vitro evaluations confirmed the cytocompatibility through Ag-/Cu-substituting and the antibacterial properties provided by Ag+. Then, these multifunctional "smart" particles were embedded in a polymeric matrix by freeze-casting to prepare 3D porous scaffolds for bone engineering. This approach envisions the development of a new generation of scaffolds with tailored sequential properties for optimal bone regeneration.

Innovative ceramic-matrix composite substrates with tunable electrical conductivity for high-power applications.

A wide band gap semiconductor power module can operate at higher voltages as compared with its traditional silicon counterpart. However, its insulating system undergoes stronger electric fields at the triple point between the ceramic substrate, the metallic tracks and the encapsulating polymer, which can dramatically reduce its lifespan. Here we report an original concept based on the local modification of the substrate properties to mitigate such electrical stress. Numerical simulations revealed its potential to reduce this constraint by up to 50%. This concept was realized by developing, through a practical approach, a novel substrate made of an AlN-based ceramic (material A) integrating a nanocomposite volume endowed with controlled properties and geometry. This approach implies first the spark plasma sintering of the AlN powder with additives (Y2O3, CaF2) to endow the material A with a very low electrical conductivity (σ) and high thermal conductivity (k). Graphene nanoplatelets (GNP) were incorporated within this material to fabricate a nanocomposite with a controlled σ anisotropy that otherwise reached a striking ratio of 106 at 20°C for 1.25 vol% GNP. Our approach secondly aimed at developing an effective process allowing to integrate this nanocomposite into the material A with a very high degree of reproducibility. It finally consisted in establishing the electrical contacts on the achieved substrate and encapsulating it for breakdown testing. The novel substrate enabled a mitigation of the electrical constraint by diminishing its intensity and shifting it from the triple point to a less constrained area. It already brought an improvement in breakdown voltage (VB) by 15% as compared to the traditional substrate, and revealed the potential for achieving higher VB as well. This work lays the foundation for the development of novel multifunctional ceramic-matrix composite substrates sought for power electronics as well as for other potential applications.

Safe-by-Design Antibacterial Peroxide-Substituted Biomimetic Apatites: Proof of Concept in Tropical Dentistry.

Bone infections are a key health challenge with dramatic consequences for affected patients. In dentistry, periodontitis is a medically compromised condition for efficient dental care and bone grafting, the success of which depends on whether the surgical site is infected or not. Present treatments involve antibiotics associated with massive bacterial resistance effects, urging for the development of alternative antibacterial strategies. In this work, we established a safe-by-design bone substitute approach by combining bone-like apatite to peroxide ions close to natural in vivo oxygenated species aimed at fighting pathogens. In parallel, bone-like apatites doped with Ag+ or co-doped Ag+/peroxide were also prepared for comparative purposes. The compounds were thoroughly characterized by chemical titrations, FTIR, XRD, SEM, and EDX analyses. All doped apatites demonstrated significant antibacterial properties toward four major pathogenic bacteria involved in periodontitis and bone infection, namely Porphyromonas gingivalis (P. gingivalis), Aggregatibacter actinomycetemcomitans (A. actinomycetemcomitans), Fusobacterium nucleatum (F. nucleatum), and S. aureus. By way of complementary tests to assess protein adsorption, osteoblast cell adhesion, viability and IC50 values, the samples were also shown to be highly biocompatible. In particular, peroxidated apatite was the safest material tested, with the lowest IC50 value toward osteoblast cells. We then demonstrated the possibility to associate such doped apatites with two biocompatible polymers, namely gelatin and poly(lactic-co-glycolic) acid PLGA, to prepare, respectively, composite 2D membranes and 3D scaffolds. The spatial distribution of the apatite particles and polymers was scrutinized by SEM and µCT analyses, and their relevance to the field of bone regeneration was underlined. Such bio-inspired antibacterial apatite compounds, whether pure or associated with (bio)polymers are thus promising candidates in dentistry and orthopedics while providing an alternative to antibiotherapy.

Low-energy electron beam sterilization of solid alginate and chitosan, and their polyelectrolyte complexes.

Polysaccharidic scaffolds hold great hope in regenerative medicine, however their sterilization still remains challenging since conventional methods are deleterious. Recently, electron beams (EB) have raised interest as emerging sterilization techniques. In this context, the aim of this work was to study the impact of EB irradiations on polysaccharidic macroporous scaffolds. The effects of continuous and pulsed low energy EB were examined on polysaccharidic or on polyelectrolyte complexes (PEC) scaffolds by SEC-MALLS, FTIR and EPR. Then the scaffolds' physicochemical properties: swelling, architecture and compressive modulus were investigated. Finally, sterility and in vitro biocompatibility of irradiated scaffolds were evaluated to validate the effectiveness of our approach. Continuous beam irradiations appear less deleterious on alginate and chitosan chains, but the use of a pulsed beam limits the time of irradiation and better preserve the architecture of PEC scaffolds. This work paves the way for low energy EB tailor-made sterilization of sensitive porous scaffolds.

Alginate-chitosan PEC scaffolds: A useful tool for soft tissues cell therapy.

In this study we evaluate macroporous scaffolds made of alginate-chitosan polyelectrolyte complexes (PEC) as tools to optimize the results of soft tissues cell therapy. Cell therapy using mesenchymal stem cells (MSC) has become attractive for tissue repair and regeneration in a number of acute and chronic injuries. Unfortunately their low retention and/or survival after injection limit their beneficial effects. A biomaterial-assisted implantation, providing cells a three-dimensional (3D) microenvironment is a promising strategy. To this purpose, we designed a family of PEC scaffolds, and studied if they could meet the requirement of such application. Xray tomography showed that all PEC scaffolds present an interconnected macroporosity, and both rheology and tensile measurements reveal optimized mechanical properties (higher storage moduli and Young moduli) compared to alginate reference scaffolds. In vitro assays demonstrated their ability to allow MSC retention (higher than 90%), long-term viability and FGF2 secretion. Then, we used a skeletal muscle implantation model to assess the biological response to scaffolds graft, and showed that they support in vivo vascular formation within the implant-derived tissue. The combination of alginate/chitosan PEC scaffolds architecture and angiogenic potential make them appear as interesting tools to optimize MSC therapy results in soft tissues.

Associated tympanic bullar and cochlear hypertrophy define adaptations to true deserts in African gerbils and laminate-toothed rats (Muridae: Gerbillinae and Murinae).

Hearing capabilities in desert rodents such as gerbils and heteromyids have been inferred from both anatomical and ecological aspects and tested with experiments and theoretical models. However, very few studies have focused on other desert-adapted species. In this study, a refined three-dimensional morphometric approach was used on three African rodent tribes (Otomyini, Taterillini and Gerbillini) to describe the cochlear and tympanic bullar morphology, and to explore the role of phylogeny, allometry and ecology to better understand the underlying mechanism of any observed trends of hypertrophy in the bulla and associated changes in the cochlea. As a result, desert-adapted species could be distinguished from mesic and semi-arid taxa by the gross cochlear dimensions, particularly the oval window, which is larger in desert species. Bullar and cochlear modifications between species could be explained by environment (bulla and oval window), phylogeny (cochlear curvature gradient) and/or allometry (cochlear relative length, oval window and bulla) with some exceptions. Based on their ear anatomy, we predict that Desmodillus auricularis and Parotomys brantsii should be sensitive to low-frequency sounds, with D. auricularis sensitive to high-frequency sounds, too. This study concludes that in both arid and semi-arid adapted laminate-toothed rats and gerbils there is bulla and associated cochlea hypertrophy, particularly in true desert species. Gerbils also show tightly coiled cochlea but the significance of this is debatable and may have nothing to do with adaptations to any specific acoustics in the desert environment.

A geometric morphometric approach to the study of variation of shovel-shaped incisors.

OBJECTIVES: The scoring and analysis of dental nonmetric traits are predominantly accomplished by using the Arizona State University Dental Anthropology System (ASUDAS), a standard protocol based on strict definitions and three-dimensional dental plaques. However, visual scoring, even when controlled by strict definitions of features, visual reference, and the experience of the observer, includes an unavoidable part of subjectivity. In this methodological contribution, we propose a new quantitative geometric morphometric approach to quickly and efficiently assess the variation of shoveling in modern human maxillary central incisors (UI1). MATERIALS AND METHODS: We analyzed 87 modern human UI1s by means of virtual imaging and the ASU-UI1 dental plaque grades using geometric morphometrics by placing semilandmarks on the labial crown aspect. The modern human sample was composed of individuals from Europe, Africa, and Asia and included representatives of all seven grades defined by the ASUDAS method. RESULTS: Our results highlighted some limitations in the use of the current UI1 ASUDAS plaque, indicating that it did not necessarily represent an objective gradient of expression of a nonmetric tooth feature. Rating of shoveling tended to be more prone to intra- and interobserver bias for the highest grades. In addition, our analyses suggest that the observers were strongly influenced by the depth of the lingual crown aspect when assessing the shoveling. DISCUSSION: In this context, our results provide a reliable and reproducible framework reinforced by statistical results supporting the fact that open scale numerical measurements can complement the ASUDAS method.

Cell refinement of CsPbBr3 perovskite nanoparticles and thin films.

In this work, we performed a detailed study of the phase transformations and structural unit cell parameters of CsPbBr3 nanoparticles (NPs) and thin films. In situ X-ray diffraction patterns were acquired as a function of temperature, where the positions and widths of the diffraction peaks were systematically tracked upon heating and cooling down to room temperature (RT). Scanning electron microscopy provides physical insight on the CsPbBr3 thin films upon annealing and transmission electron microscopy gives physical and crystallographic information for the CsPbBr3 NPs using electron diffraction. The secondary phase(s) CsPb2Br5 (and CsPb4Br6) are clearly observed in the XRD patterns of both nanoparticles and thin films upon heating to 500 K, whilst from 500 K to 595 K, these phases remain in small amounts and are kept like this upon cooling down to RT. However, in the case of thin films, the CsPb2Br5 secondary phase disappears completely above 580 K and pure cubic CsPbBr3 is observed up to 623 K. The CsPbBr3 phase is then kept upon cooling down to RT, achieving pure CsPbBr3 phase. This study provides detailed understanding of the phase behavior vs. temperature of CsPbBr3 NPs and thin films, which opens the way to pure CsPbBr3 phase, an interesting material for optoelectronic applications.

Reliability of X7R Multilayer Ceramic Capacitors During High Accelerated Life Testing (HALT).

Multilayer ceramic capacitors (MLCC) are essential components for determining the reliability of electronic components in terms of time to failure. It is known that the reliability of MLCCs depends on their composition, processing, and operating conditions. In this present work, we analyzed the lifetime of three similar X7R type MLCCs based on BaTiO3 by conducting High Accelerated Life Tests (HALT) at temperatures up to 200 °C at 400 V and 600 V. The results were adjusted to an Arrhenius equation, which is a function of the activation energy (Ea) and a voltage stress exponent (n), in order to predict their time to failure. The values of Ea are in the range of 1⁻1.45 eV, which has been reported for the thermal failure and dielectric wear out of BaTiO3-based dielectric capacitors. The stress voltage exponent value was in the range of 4⁻5. Although the Ea can be associated with a failure mechanism, n only gives an indication of the effect of voltage in the tests. It was possible to associate those values with each type of tested MLCC so that their expected life could be estimated in the range of 400⁻600 V.

Performance Enhancement via Incorporation of ZnO Nanolayers in Energetic Al/CuO Multilayers.

Al/CuO energetic structure are attractive materials due to their high thermal output and propensity to produce gas. They are widely used to bond components or as next generation of MEMS igniters. In such systems, the reaction process is largely dominated by the outward migration of oxygen atoms from the CuO matrix toward the aluminum layers, and many recent studies have already demonstrated that the interfacial nanolayer between the two reactive layers plays a major role in the material properties. Here we demonstrate that the ALD deposition of a thin ZnO layer on the CuO prior to Al deposition (by sputtering) leads to a substantial increase in the efficiency of the overall reaction. The CuO/ZnO/Al foils generate 98% of their theoretical enthalpy within a single reaction at 900 °C, whereas conventional ZnO-free CuO/Al foils produce only 78% of their theoretical enthalpy, distributed over two distinct reaction steps at 550 °C and 850 °C. Combining high-resolution transmission electron microscopy, X-ray diffraction, and differential scanning calorimetry, we characterized the successive formation of a thin zinc aluminate (ZnAl2O4) and zinc oxide interfacial layers, which act as an effective barrier layer against oxygen diffusion at low temperature.

Intra-individual metameric variation expressed at the enamel-dentine junction of lower post-canine dentition of South African fossil hominins and modern humans.

OBJECTIVES: The aim of this study is to compare the degree and patterning of inter- and intra-individual metameric variation in South African australopiths, early Homo and modern humans. Metameric variation likely reflects developmental and taxonomical issues, and could also be used to infer ecological and functional adaptations. However, its patterning along the early hominin postcanine dentition, particularly among South African fossil hominins, remains unexplored. MATERIALS AND METHODS: Using microfocus X-ray computed tomography (µXCT) and geometric morphometric tools, we studied the enamel-dentine junction (EDJ) morphology and we investigated the intra- and inter-individual EDJ metameric variation among eight australopiths and two early Homo specimens from South Africa, as well as 32 modern humans. RESULTS: Along post-canine dentition, shape changes between metameres represented by relative positions and height of dentine horns, outlines of the EDJ occlusal table are reported in modern and fossil taxa. Comparisons of EDJ mean shapes and multivariate analyses reveal substantial variation in the direction and magnitude of metameric shape changes among taxa, but some common trends can be found. In modern humans, both the direction and magnitude of metameric shape change show increased variability in M2 -M3 compared to M1 -M2 . Fossil specimens are clustered together showing similar magnitudes of shape change. Along M2 -M3 , the lengths of their metameric vectors are not as variable as those of modern humans, but they display considerable variability in the direction of shape change. CONCLUSION: The distalward increase of metameric variation along the modern human molar row is consistent with the odontogenetic models of molar row structure (inhibitory cascade model). Though much remains to be tested, the variable trends and magnitudes in metamerism in fossil hominins reported here, together with differences in the scale of shape change between modern humans and fossil hominins may provide valuable information regarding functional morphology and developmental processes in fossil species.

Elaboration and evaluation of alginate foam scaffolds for soft tissue engineering.

Controlling microarchitecture in polymer scaffolds is a priority in material design for soft tissue applications. This paper reports for the first time the elaboration of alginate foam-based scaffolds for mesenchymal stem cell (MSC) delivery and a comparative study of various surfactants on the final device performance. The use of surfactants permitted to obtain highly interconnected porous scaffolds with tunable pore size on surface and in cross-section. Their mechanical properties in compression appeared to be adapted to soft tissue engineering. Scaffold structures could sustain MSC proliferation over 14 days. Paracrine activity of scaffold-seeded MSCs varied with the scaffold structure and growth factors release was globally improved in comparison with control alginate scaffolds. Our results provide evidence that exploiting different surfactant types for alginate foam preparation could be an original method to obtain biocompatible scaffolds with tunable architecture for soft tissue engineering.

Morphoarchitectural variation in South African fossil cercopithecoid endocasts.

Despite the abundance of well-preserved crania and natural endocasts in the South African Plio-Pleistocene cercopithecoid record, which provide direct information relevant to the evolution of their endocranial characteristics, few studies have attempted to characterize patterns of external brain morphology in this highly successful primate Superfamily. The availability of non-destructive penetrating radiation imaging systems, together with recently developed computer-based analytical tools, allow for high resolution virtual imaging and modeling of the endocranial casts and thus disclose new perspectives in comparative paleoneurology. Here, we use X-ray microtomographic-based 3D virtual imaging and quantitative analyses to investigate the endocranial organization of 14 cercopithecoid specimens from the South African sites of Makapansgat, Sterkfontein, Swartkrans, and Taung. We present the first detailed comparative description of the external neuroanatomies that characterize these Plio-Pleistocene primates. Along with reconstruction of endocranial volumes, we combine a semi-automatic technique for extracting the neocortical sulcal pattern together with a landmark-free surface deformation method to investigate topographic differences in morphostructural organization. Besides providing and comparing for the first time endocranial volume estimates of extinct Plio-Pleistocene South African cercopithecoid taxa, we report additional information regarding the variation in the sulcal pattern of Theropithecus oswaldi subspecies, and notably of the central sulcus, and the neuroanatomical condition of the colobine taxon Cercopithecoides williamsi, suggested to be similar for some aspects to the papionin pattern, and discuss potential phylogenetic and taxonomic implications. Further research in virtual paleoneurology, applied to specimens from a wider geographic area, is needed to clarify the polarity, intensity, and timing of cortical surface evolution in cercopithecoid lineages.

First-principles electronic structure calculations for the whole spinel oxide solid solution range MnxCo3-xO4 (0 ≤ x ≤ 3) and their comparison with experimental data.

Transition metal spinel oxides have recently been suggested for the creation of efficient photovoltaic cells or photocatalysts. These compounds can be easily tuned by doping to adapt their electronic or magnetic properties. However, their cation distribution is very complex and band structures are still a subject of controversy. We propose a complete density functional theory investigation of MnxCo3-xO4 compounds, using different approximations in order to explain the variation of these properties as a function of composition (for 0 ≤ x ≤ 3) and determine the electronic structure over the whole solid solution range. A detailed study of their atomic structure, magnetic properties and electronic structure is given and compared with experimental data. The unit cell volume calculated for each composition is in agreement with the volume obtained experimentally in ceramics, while a cubic-to-tetragonal structural transition is predicted at x = 2.0. An antiferromagnetic to ferrimagnetic behavior is observed at the lowest ordering temperature depending on the composition. The band gap, deduced from our band structure calculations, strongly decreases upon doping of the end members Co3O4 and Mn3O4, but is partly restored by the tetragonal distortion. A direct band gap, close to 0.5-0.8 eV, is calculated for 0.25 ≤ x ≤ 2.25, justified by inter-metal transitions from Mn ions on octahedral sites.

Further morphological evidence on South African earliest Homo lower postcanine dentition: Enamel thickness and enamel dentine junction.

The appearance of the earliest members of the genus Homo in South Africa represents a key event in human evolution. Although enamel thickness and enamel dentine junction (EDJ) morphology preserve important information about hominin systematics and dietary adaptation, these features have not been sufficiently studied with regard to early Homo. We used micro-CT to compare enamel thickness and EDJ morphology among the mandibular postcanine dentitions of South African early hominins (N = 30) and extant Homo sapiens (N = 26), with special reference to early members of the genus Homo. We found that South African early Homo shows a similar enamel thickness distribution pattern to modern humans, although three-dimensional average and relative enamel thicknesses do not distinguish australopiths, early Homo, and modern humans particularly well. Based on enamel thickness distributions, our study suggests that a dietary shift occurred between australopiths and the origin of the Homo lineage. We also observed that South African early Homo postcanine EDJ combined primitive traits seen in australopith molars with derived features observed in modern human premolars. Our results confirm that some dental morphological patterns in later Homo actually occurred early in the Homo lineage, and highlight the taxonomic value of premolar EDJ morphology in hominin species.

Upper third molar internal structural organization and semicircular canal morphology in Plio-Pleistocene South African cercopithecoids.

Despite the abundance of cercopithecoids in the fossil record, especially in South Africa, and the recent development of morphometric approaches, uncertainties regarding the taxonomic identification of isolated cranio-dental specimens remain. Because cercopithecoids, nearly always found in stratigraphic association with hominin remains in Plio-Pleistocene deposits, are considered as sensitive ecological and chronological biomarkers, a significant effort should be made to clarify their palaeobiodiversity by assessing additional reliable morphological diagnostic criteria. Here we test the relevance of both molar crown internal structure and bony labyrinth morphology for discrimination of fossil cercopithecoid species. We use microtomographic-based 3D virtual imaging and quantitative analyses to investigate tooth endostructural organization and inner ear shape in 29 craniodental specimens from the South African sites of Kromdraai, Makapansgat, Sterkfontein and Swartkrans and provide the first detailed description of the internal structural condition characterizing this Plio-Pleistocene primate assemblage. Our preliminary results show that enamel-dentine junction morphology could be informative for discriminating highly autapomorphic taxa such as Theropithecus, while semicircular canal shape is tentatively proposed as an efficient criterion for diagnosing Dinopithecus ingens. Further research in virtual paleoprimatology may contribute to the identification of unassigned isolated fossil remains and shed new light on the internal craniodental morphology of extinct primate taxa.

Understanding the Fragmentation Pattern of Marine Plastic Debris.

The global estimation of microplastic afloat in the ocean is only approximately 1% of annual global plastic inputs. This reflects fundamental knowledge gaps in the transformation, fragmentation, and fates of microplastics in the ocean. In order to better understand microplastic fragmentation we proceeded to a thorough physicochemical characterization of samples collected from the North Artlantic subtropical gyre during the sea campaign Expedition seventh Continent in May 2014. The results were confronted with a mathematical approach. The introduction of mass distribution in opposition to the size distribution commonly proposed in this area clarify the fragmentation pattern. The mathematical analysis of the mass distribution points out a lack of debris with mass lighter than 1 mg. Characterization by means of microscopy, microtomography, and infrared microscopy gives a better understanding of the behavior of microplastic at sea. Flat pieces of debris (2 to 5 mm in length) typically have one face that is more photodegraded (due to exposure to the sun) and the other with more biofilm, suggesting that they float in a preferred orientation. Smaller debris, with a cubic shape (below 2 mm), seems to roll at sea. All faces are evenly photodegraded and they are less colonized. The breakpoint in the mathematical model and the experimental observation around 2 mm leads to the conclusion that there is a discontinuity in the rate of fragmentation: we hypothesized that the smaller microplastics, the cubic ones mostly, are fragmented much faster than the parallelepipeds.

Quasi-intrinsic colossal permittivity in Nb and In co-doped rutile TiO2 nanoceramics synthesized through a oxalate chemical-solution route combined with spark plasma sintering.

Nb and In co-doped rutile TiO2 nanoceramics (n-NITO) were successfully synthesized through a chemical-solution route combined with a low temperature spark plasma sintering (SPS) technique. The particle morphology and the microstructure of n-NITO compounds were nanometric in size. Various techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG)/differential thermal analysis (DTA), Fourier transform infrared (FTIR), and Raman spectroscopy were used for the structural and compositional characterization of the synthesized compound. The results indicated that the as-synthesized n-NITO oxalate as well as sintered ceramic have a co-doped single phase of titanyl oxalate and rutile TiO2, respectively. Broadband impedance spectroscopy revealed that novel colossal permittivity (CP) was achieved in n-NITO ceramics exhibiting excellent temperature-frequency stable CP (up to 10(4)) as well as low dielectric loss (∼5%). Most importantly, detailed impedance data analyses of n-NITO compared to microcrystalline NITO (µ-NITO) demonstrated that the origin of CP in NITO bulk nanoceramics might be related with the pinned electrons in defect clusters and not to extrinsic interfacial effects.

Enhancing the Reactivity of Al/CuO Nanolaminates by Cu Incorporation at the Interfaces.

In situ deposition of a thin (∼5 nm) layer of copper between Al and CuO layers is shown to increase the overall nanolaminate material reactivity. A combination of transmission electron microscopy imaging, in situ infrared spectroscopy, low energy ion scattering measurements, and first-principles calculations reveals that copper spontaneously diffuses into aluminum layers (substantially less in CuO layers). The formation of an interfacial Al:Cu alloy with melting temperature lower than pure Al metal is responsible for the enhanced reactivity, opening a route to controlling the stochiometry of the aluminum layer and increasing the reactivity of the nanoenergetic multilayer systems in general.

Complex diffusion behavior of oxygen in nanocrystalline BaTiO3 ceramics.

(18)O/(16)O exchange annealing and subsequent Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) analysis is used to investigate oxygen transport in dense, nanocrystalline (average grain size d ≈ 300 nm) ceramics of nominally un-doped BaTiO3. Isotope penetration profiles are obtained as a function of temperature, 973 < T/K < 1173, at an oxygen activity aO2 = 0.20 and as a function of oxygen activity, 0.002 < aO2 < 0.20, at T = 1073 K. All isotope profiles show the same unusual shape: a flattened profile over the first ∼10(2) nm, followed by a short, conventional diffusion profile. We demonstrate that the entire isotope profile can be described quantitatively by a numerical solution to the diffusion equation based on an increase in the local oxygen diffusion coefficient close to the surface. This position-dependent increase is attributed to additional oxygen vacancies that are generated by diffusion of chlorine impurities out of the ceramics. The presence of chlorine derives from the chemical route necessary to produce nanometric powders: it thus indicates a new manner in which nanocrystalline ceramics may differ from their microcrystalline counterparts.