Unveiling the lithium deintercalation mechanisms in spent lithium-ion batteries via sulfation roasting.

Recovery of valuable metals from spent lithium-ion batteries (LIBs) is of great importance for resource sustainability and environmental protection. This study introduced pyrite ore (FeS2) as an alternative additive to achieve the selective recovery of Li2CO3 from spent LiCoO2 (LCO) batteries. The mechanism study revealed that the sulfation reaction followed two pathways. During the initial stage (550 °C-800 °C), the decomposition and oxidation of FeS2 and the subsequent gas-solid reaction between the resulting SO2 and layered LCO play crucial roles. The sulfation of lithium occurred prior to cobalt, resulting in the disruption of layered structure of LCO and the transformation into tetragonal spinel. In the second stage (over 800 °C), the dominated reactions were the decomposition of orthorhombic cobalt sulfate and its combination with rhombohedral Fe2O3 to form CoFe2O4. The deintercalation of Li from LCO by the substitution of Fe and conversion of Co(III)/Fe(II) into Co3O4/CoFe2O4 were further confirmed by density functional theory (DFT) calculation results. This fundamental understanding of the sulfation reaction facilitated the future development of lithium extraction methods that utilized additives to substantially reduce energy consumption.

Acid-free extraction of valuable metal elements from spent lithium-ion batteries using waste copperas.

A large amount of hazardous spent lithium-ion batteries (LIBs) is produced every year. Recovery of valuable metals from spent LIBs is significant to achieve environmental protection and alleviate resource shortages. In this study, a green and facile process for recovery of valuable metals from spent LIBs by waste copperas was proposed. The effects of heat treatment parameters on recovery efficiency of valuable metals and the redox mechanism were studied systematically through phase transformation behavior and valence transition. At low temperature (≤460 °C), copperas reacted with lithium on the outer layer of LIBs preferentially, but the reduction of transition metals was limited. As the temperature rose to 460-700 °C, the extraction efficiency of valuable metals was greatly enhanced due to the generation of SO2, and the gas-solid reaction proceeded much fast than the solid-solid reaction. In the final stage (≥700 °C), the main reactions were the thermal decomposition of soluble sulfates and the combination of decomposed oxides with Fe2O3 to form insoluble spinel. Under the optimum roasting conditions, i.e., at a copperas/LIBs mass ratio of 4.5, and a roasting temperature of 650 °C and roasting time of 120 min, the leaching efficiencies of Li, Ni, Co and Mn were 99.94%, 99.2%, 99.5% and 99.65%, respectively. The results showed that valuable metals can be selectively and efficiently extracted from the complex cathode materials by water leaching. This study used waste copperas as an aid to recover metals and provided an alternative technical route for green recycling of spent LIBs.

A dual-mode of electrochemical-colorimetric biosensing platform for kanamycin detection based on self-sacrifice beacon and magnetic separation technique.

In this work, iron-based metal organic frameworks (Fe-MOF) are used as a self-sacrifice beacon to produce Prussian blue (PB). Then, a dual-mode electrochemical-colorimetric biosensing platform for kanamycin (KAN) detection is established considering the prominent redox activity and blue color of PB. CoFe2O4 magnetic nanobeads (CoFe2O4 MBs) are employed for immobilization and separation of the signal beacon in the complex matrix, and the combination between CoFe2O4 MBs and magnetic electrodes simplifies the electrochemical testing process. The linear range of the electrochemical mode is 0.1 nM-1.0 µM with a detection limit of 39 pM, and that of the colorimetric mode is 10 nM-2.0 µM with a detection limit of 3.6 nM. Furthermore, the dual-mode strategy shows satisfactory specificity and enhanced applicability for KAN detection in real samples. Compared with known dual-mode determination methods, the proposed design employs the same reaction to produce two signal output modes, thus eliminating the effect of different reactive pathways on the outcome and in turn promoting greater accuracy.

An electroanalytical platform for nereistoxin-related insecticide detection based on DNA conformational switching and exonuclease III assisted target recycling.

In this work, an electroanalytical platform for nereistoxin (NRT)-related insecticide detection is proposed on the basis of NRT induced DNA conformational switching and exonuclease III (Exo III) assisted target recycling. NRT-related insecticides were first hydrolyzed and converted into NRT with two thiol groups (-SH). Then, a cytosine-Ag+-cytosine (C-Ag+-C) mismatched base pair was adopted to induce a blunt-ended hairpin configuration of HP DNA. In the presence of converted NRT, it could take up Ag+ from HP DNA to change its conformation from a hairpin to single-stranded structure (HP ssDNA). Thereafter, the obtained HP ssDNA was further hybridized with an H1 hairpin probe on the electrode surface to trigger the Exo III cleavage process, releasing HP ssDNA for recycling leaving the G-quadruplex fragment of H1, which was used for hemin/G-quadruplex complex formation. The reversible redox reaction of Fe(iii)/Fe(ii) of hemin gave a remarkable electrochemical response for quantitative determination of the NRT-related insecticides. As an analytical model, a low detection limit of 3.9 ng L-1 and a wide linear range of 0.01-1500 µg L-1 with excellent selectivity were achieved for cartap detection. The proposed method also displayed great applicability for cartap detection in agricultural products.

Enhanced Photocatalytic Activity of the Carbon Quantum Dot-Modified BiOI Microsphere.

Novel carbon quantum dot (CQD)-modified BiOI photocatalysts were prepared via a facile hydrothermal process. The CQD-modified BiOI materials were characterized by multiple techniques. The CQD with an average size around several nanometers was distributed on the surface of BiOI microsphere. Its photocatalytic activity was investigated sufficiently by the photodegradation of methylene orange (MO). The results showed that the CQD/BiOI 1.5 wt.% sample exhibited the optimum photocatalytic activity, which was 2.5 times that of the pure BiOI. This improvement was attributed to the crucial role of CQDs, which could be acted as a photocenter for absorbing solar light, charge separation center for suppressing charge recombination.

Low-cost and highly efficient DNA biosensor for heavy metal ion using specific DNAzyme-modified microplate and portable glucometer-based detection mode.

A simple and low-cost DNA sensing platform based on Pb(2+)-specific DNAzyme-modified microplate was successfully developed for highly sensitive monitoring of lead ion (Pb(2+), one kind of toxic heavy metal ion) in the environmental samples coupling with a portable personal glucometer (PGM)-based detection mode. The detection cell was first prepared simply by means of immobilizing the DNAzyme on the streptavidin-modified microplate. Gold nanoparticle labeled with single-stranded DNA and invertase (Enz-AuNP-DNA) was utilized as the signal-transduction tag to produce PGM substrate (glucose). Upon addition of lead ion into the microplate, the substrate strand of the immobilized DNAzyme was catalytically cleaved by target Pb(2+), and the newly generated single-strand DNA in the microplate could hybridize again with the single-stranded DNA on the Enz-AuNP-DNA. Accompanying with the Enz-AuNP-DNA, the carried invertase could convert sucrose into glucose. The as-produced glucose could be monitored by using a widely accessible PGM for in situ amplified digital readout. Based on Enz-AuNP-DNA amplification strategy, as low as 1.0 pM Pb(2+) could be detected under the optimal conditions. Moreover, the methodology also showed good reproducibility and high selectivity toward target Pb(2+) against other metal ions because of highly specific Pb(2+)-dependent DNAzyme, and was applicable for monitoring Pb(2+) in the naturally contaminated sewage and spiked drinking water samples.