RESUMO
Retention and transport behaviours of microplastics (MPs) and their associated pollutants in porous media are of great concern. The homogeneity of the studied MPs in artificially controlled lab-scale studies makes rapid and accurate MP quantification feasible. In this study, an economical ethanol-diluted turbidimetry method for polypropylene (PP) and polyethylene (PE) MPs was developed. With ethanol dilution, the MP dispersion system exhibited an excellent suspension performance. Strong linear relationships were observed between MP concentrations and turbidities in both low (<1.3 mg L-1) and high (<170 mg L-1) MP concentration ranges. Solution density and MP agglomeration governed the MP suspension performance. For low surface tension and high molecular mass, the addition of ethanol decreased the contact angles of PP-MPs with solutions from 81.73 to 15.5°, and consequently improved the MP suspension performance. The suspension system was optimised to an ethanol/water (v/v) ratio of 3:2 and 4:1 for PP- and PE-MPs, when the slopes of standard curves were determined to be 1.252 and 0.471 with the recovery of 100.54 ± 3.09% and 103.19 ± 1.66%, and the limit of detection and quantification values of 0.025 and 0.082 mg L-1, and 0.060 and 0.201 mg L-1, respectively. Solution pH, salinity, and dissolved organic matter in the selected range induced acceptable fluctuations in the MP recovery and matrix effect values. The Derjaguin-Landau-Verwey-Overbeek (DLVO) energy barriers were calculated to be > 20 kT, indicating excellent tolerance to the solution matrix. Additionally, applications in real water samples were validated to demonstrate the potential of the developed method.