Chip-based quantum key distribution.

Improvement in secure transmission of information is an urgent need for governments, corporations and individuals. Quantum key distribution (QKD) promises security based on the laws of physics and has rapidly grown from proof-of-concept to robust demonstrations and deployment of commercial systems. Despite these advances, QKD has not been widely adopted, and large-scale deployment will likely require chip-based devices for improved performance, miniaturization and enhanced functionality. Here we report low error rate, GHz clocked QKD operation of an indium phosphide transmitter chip and a silicon oxynitride receiver chip-monolithically integrated devices using components and manufacturing processes from the telecommunications industry. We use the reconfigurability of these devices to demonstrate three prominent QKD protocols-BB84, Coherent One Way and Differential Phase Shift-with performance comparable to state-of-the-art. These devices, when combined with integrated single photon detectors, pave the way for successfully integrating QKD into future telecommunications networks.

Observation of the three-state dressed states in circuit quantum electrodynamics.

We have investigated the microwave response of a transmon qubit coupled directly to a transmission line. In a transmon qubit, owing to its weak anharmonicity, a single driving field may generate dressed states involving more than two bare states. We confirmed the formation of three-state dressed states by observing all of the six associated Rabi sidebands, which appear as either amplification or attenuation of the probe field. The experimental results are reproduced with good precision by a theoretical model incorporating the radiative coupling between the qubit and the microwave.

Localization and interaction effects in ultrathin epitaxial NbN superconducting films.

For epitaxial NbN films with thickness d, 2.0 nm ≤ d ≤ 20.5 nm, we observed a sharp superconducting transition, for which the transition temperature T(c) monotonically decreased with increasing 1/d. Regarding the suppression of T(c), the sheet resistance R(sq) dependence of T(c) closely fitted the Finkel'stein formula from localization theory, with a reasonable value of the electron mean free path comparable to atomic distance, which was used as a fitting parameter. On the other hand, the critical sheet resistance R(c), at which the superconducting-insulator transition was expected, was approximately one-third of the universal value R(q) = h/4e(2) suggested by the dirty boson model for self-duality. It is concluded that T(c) depression in the present NbN system is determined by localization theory but not the dirty boson model.

Multi-platform experiment to cross a boundary between laboratory and real situational studies: experimental discussion of cross-situational consistency of driving behaviors.

We constructed an innovative experimental platform to study cross-situational consistency in driving behavior, conducted behavioral experiments, and reported the data obtained in the experiment. To discuss cross-situational consistency, we separated situations in which people use some systems to conduct tasks into three independent conceptual factors: environment, context, and system. We report the experimental results with the following systems: a laboratory system with a gaming controller and steering/pedal controllers and a real system, COMS an instrumented vehicle. The results are summarized as follows. 1) The individual behaviors in each system were stable, and consistency was retained. 2) The consistency of the behaviors was also confirmed when the participants drove using different interfaces in identical systems. 3) However, only slight correlation was observed across different systems in a specific situation where a strong high-order cognitive constraint (i.e., rapid driving) and a weak low-order cognitive constraint (driving with easy handling toward a straight-line course) were given.

Chronic tongue ulceration resolved by sulpiride: a report of two cases.

We report two patients with chronic tongue ulceration who were successfully treated using sulpiride. The clinical diagnosis was oral candidiasis related to long-term steroid treatment. The results of the culture test and cytological examination supported this diagnosis, but antifungal treatment was ineffective and the tongue pain in these patients became more severe. Furthermore, the pain could not be relieved by nonsteroidal anti-inflammatory drugs (NSAIDs). We therefore prescribed sulpiride in addition to NSAIDs to reduce the tongue pain. A consequent improvement in both pain severity and ulceration was observed 2-3 weeks after sulpiride administration.

Tongue pain: burning mouth syndrome vs Candida- associated lesion.

OBJECTIVE: We investigated patients with tongue pain to examine whether the differential diagnosis of burning mouth syndrome and Candida-associated lesion was possible. PATIENTS AND METHODS: Sixty patients with tongue pain were divided into three groups according to the intensity of pain at rest and that when eating using the visual analogue scale: Group A: Functional pain group. Group B: Non-functional pain group. Group C: Mixed pain group. Antifungal treatment was scheduled for patients suspected clinically, mycologically or cytologically as having candidal infection. RESULTS: The results of the culture test and direct examination indicated that group A was different from others by its high positivity for Candida, a good response to the antifungal treatment was obtained. On the other hand, antifungal treatment was not useful in group B, and the low possibility of Candida infection in the direct examination supported the result in this group. In group C, the positivity of Candida and the effect of the antifungal treatment were between groups A and B. CONCLUSION: These results may suggest that tongue pain in group A is Candida-associated, that in group B is burning mouth syndrome-induced and that of group C is mixed conditions.

Engineering of implantable cartilaginous structures from bone marrow-derived mesenchymal stem cells.

Fabrication of implantable cartilaginous structures that could be secured in the joint defect could provide an alternative therapeutic approach to prosthetic joint replacement. Herein we explored the possibility of using biodegradable hydrogels in combination with a polyglycolic acid (PGA) scaffold to provide an environment propitious to mesenchymal stem cells (MSCs) chondrogenic differentiation. We examined the influence of type I collagen gel and alginate combined with PGA meshes on the extracellular matrix composition of tissue-engineered transplants. MSCs were isolated from young rabbits, expanded in monolayers, suspended in each hydrogel, and loaded on PGA scaffolds. All constructs (n=48) were cultured in serum-free medium containing transforming growth factor beta-1, under dynamic conditions in specially designed bioreactors for 3-6 weeks. All cell-polymer constructs had a white, shiny aspect, and retained their initial size and shape over the culture period. Their thickness increased substantially over time, and no shrinkage was observed. All specimens developed a hyalin-like extracellular matrix containing glycosaminoglycans (GAGs) and type II collagen, but significant differences were observed among the three different groups. In PGA/MSCs and collagen-PGA/MSCs constructs, the cell growth phase and the chondrogenic differentiation phase of MSCs occurred during the first 3 weeks. In alginate-PGA/MSCs constructs, cells remained round in the hydrogel and cartilage extracellular matrix deposition was delayed. However, at 6 weeks, alginate-PGA/MSCs constructs exhibited higher contents of GAGs and lower contents of type I collagen. These results suggest that the implied time for the transplantation of in vitro engineered constructs depends, among other factors, on the nature of the scaffold envisioned. In this study, we demonstrated that the use of a composite hydrogel-PGA scaffold supported the in vitro growth of implantable cartilaginous structures cultured in a bioreactor system.

Partial atrophic tongue other than median rhomboid glossitis.

A group of 23 patients with partial atrophic change of the tongue was examined for candidiasis. All of them reported pain in the tongue on eating hot or spicy food. The intensity of the tongue pain was evaluated before and after treatment using a visual analogue scale. Of the 23 patients, 10 (43.5%) had predisposing factors for candidiasis such as diabetes mellitus and anaemia. In the culture examination, candidal species were isolated in 65.2%, all Candida albicans. Direct cytological examination performed in 10 of the 23 patients revealed fungal pseudohyphae in 8 patients. After antifungal treatment, tongue pain had disappeared or improved markedly in 82.6%. Simultaneously, the filiform papilla of the atrophic site was observed to have begun to regenerate in these patients. Candida infection should be suspected in patients with partial atrophic tongue associated with pain on eating.

Cheilitis as a variation of Candida-associated lesions.

OBJECTIVE: Occasionally, the clinical diagnosis of Candida-associated lesion is difficult because of a variety of its clinical manifestations. There have been a few reports on Candida-associated lip lesion except angular cheilitis. In this paper, we investigate the relation of Candida in persistent lesions of the lip. SUBJECTS AND METHODS: The present study includes consecutive nine patients with persistent erosive lip lesion. For each patient the age at presentation, gender, duration of the disease, other symptoms or signs, complete medical history and prior treatment or medications for the symptom were obtained. Then, mycological examination and the direct cytologic examination were performed. RESULTS: The reported average duration of the disease was 7 months. Six of nine patients had received prior treatments with topical steroids at the other clinic, which failed to resolve their symptoms. Six of nine patients had a predisposing factor for candidiasis. In the culture examination, Candida albicans were isolated in seven patients (77.8%). Five of nine patients received the direct cytologic examination, and four of them revealed pseudohyphae of fungi. The anti-fungal treatment was miconazol gel 25 mg four times per day, and average duration of the treatment was 2 weeks. The outcome was as follows: complete remission in five, remarkable response in two and no response in two. CONCLUSION: Our results suggested that one form of the varieties of Candida-associated lesions might be considered in the case of lip lesion with unknown origin that was persistent and ineffective to the topical steroids treatment.

PRKAR1A gene mutation in patients with cardiac myxoma.

BACKGROUND: PRKAR1A gene encodes the type 1A regulatory subunit of protein kinase A. The mutation of this gene causes Carney complex which is an autosomal dominant multiple neoplasia syndrome characterized by spotty pigmentations, endocrine overactivity and cardiac myxoma. We hypothesized that cardiac myxoma may be associated with PRKAR1A gene mutation and determined whether mutation in the PRKAR1A gene is the cause of familial and sporadic cardiac myxoma. METHODS: We studied seven patients (three males and four females) with cardiac myxoma. Two of them had familial cardiac myxoma complicated with Carney complex. The other five patients were characterized as sporadic cardiac myxomas. We analyzed the PRKAR1A gene of all patients by the polymerase chain reaction (PCR)-single-strand conformation method, followed with direct sequence analysis. RESULTS: We identified a novel mutation (494delTG) in exon 4A of the PRKAR1A gene in the patients with Carney complex. A 16-year-old proband had a left atrial myxoma, pituitary adenoma and skin pigmentation. His father also had left atrial myxoma and skin pigmentation. In contrast, no mutations in the PRKAR1A gene were identified in the other five patients with sporadic cardiac myxomas. CONCLUSIONS: These results suggest that mutation of the PRKAR1A gene may be associated with familial cardiac myxoma in Carney complex but may not be associated with sporadic cardiac myxoma.

A new acellular vascular prosthesis as a scaffold for host tissue regeneration.

OBJECTIVE: In situ tissue engineering using acellular xenografts is a new approach to autologous tissue regeneration. In the present study, we analyzed a new regeneration scaffold comprised of xenogenic acellular vessels in a dog model. DESIGN OF STUDY AND RESULTS: Xenogenic vascular conduits of porcine carotid arteries were acellularized by a 48-hour detergent incubation to extract all the cell components of the graft. The acellularisation procedure resulted in a complete removal of all cells. After this procedure, heparinization was performed sequentially to induce antithrombogenicity in the graft. The burst pressure of the graft was tested. The bursting pressure of the fresh vessels was 2.83 +/- 0.56 x 10(3) mmHg (377 +/- 75kPa, n = 6). After detergent treatment, the bursting pressure of the grafts was 2.50 +/- 0.48 x 10(3) mmHg (334 +/- 63 kPa, n = 6); after heparinization, it was 3.44 +/- 0.38 x 10(3) mmHg (459 +/- 51 kPa, n = 5). In vivo function was tested in a dog model by transplantation to the abdominal artery. By 18 weeks, endothelial cells were aligned as in normal, healthy artery over the surface of the entire graft. Fibroblasts and macrophages had infiltrated the graft from both inside and outside. The neointima contained normal layers of smooth muscle cells, which were identified by anti alpha-smooth muscle fiber antigen staining. CONCLUSIONS: The acellular heparinized xenograft has sufficient mechanical properties and was successfully replaced with host tissue, and is thus a promising new type of vascular prosthesis.

QT dispersion and left ventricular morphology in patients with hypertrophic cardiomyopathy.

OBJECTIVE: To evaluate the relation between QT variables and disproportion of left ventricular wall hypertrophy in patients with hypertrophic cardiomyopathy. DESIGN: Retrospective analysis of the results of echocardiography and electrocardiography. SETTING: University hospital (tertiary referral centre). PATIENTS: 70 patients with hypertrophic cardiomyopathy were divided into four groups according to the distribution of left ventricular wall hypertrophy on cross sectional echocardiography: group A--hypertrophy confined to the interventricular septum; group B--hypertrophy confined to the interventricular septum and left ventricular anterior wall; group C--hypertrophy confined to the interventricular septum, left ventricular anterior wall, and lateral free wall; group D--hypertrophy involving all portions of the left ventricle. MAIN OUTCOME MEASURES: QT intervals and QT dispersion in precordial six lead ECGs. RESULTS: There were no significant differences in the maximum left ventricular wall thickness among the four groups, and maximum and minimum QTc intervals also did not differ. QTc dispersion was increased significantly in groups A and B compared with groups C and D. Dispersions of the interval from the J point to the end of the T wave (JTc dispersions) in groups A and B were also increased significantly compared with groups C and D. By linear regression analysis, QTc and JTc dispersions correlated with the ratio of the interventricular septal thickness to left ventricular posterior wall thickness (p = 0.0152 and p = 0.0075, respectively). CONCLUSIONS: QT dispersion may be affected by not only electrical inhomogeneity but also by morphological inhomogeneity of the left ventricle in patients with hypertrophic cardiomyopathy.

A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering.

Microporous, non-woven poly( epsilon -caprolactone) (PCL) scaffolds were made by electrostatic fiber spinning. In this process, polymer fibers with diameters down to the nanometer range, or nanofibers, are formed by subjecting a fluid jet to a high electric field. Mesenchymal stem cells (MSCs) derived from the bone marrow of neonatal rats were cultured, expanded and seeded on electrospun PCL scaffolds. The cell-polymer constructs were cultured with osteogenic supplements under dynamic culture conditions for up to 4 weeks. The cell-polymer constructs maintained the size and shape of the original scaffolds. Scanning electron microscopy (SEM), histological and immunohistochemical examinations were performed. Penetration of cells and abundant extracellular matrix were observed in the cell-polymer constructs after 1 week. SEM showed that the surfaces of the cell-polymer constructs were covered with cell multilayers at 4 weeks. In addition, mineralization and type I collagen were observed at 4 weeks. This suggests that electrospun PCL is a potential candidate scaffold for bone tissue engineering.

Production of a biologically active epidermal growth factor fusion protein with high collagen affinity.

Collagen is generally incapable of capturing polypeptides such as growth factors in a specific manner. In this study, we established a collagen-binding growth factor (FNCBD-EGF) consisting of epidermal growth factor (EGF) and the fibronectin collagen-binding domain. A typical yield of FNCBD-EGF was approximately 200 microg/ml culture in an Escherichia coli expression system. This fusion protein bound to gelatin and fibrillar collagen sponges, and the bound protein was not effectively eluted even with 2 M NaCl. In addition, FNCBD-EGF bound to type I, II, III, or IV collagen-coated plates, and the specificity of binding was confirmed by competitive inhibition using fibronectin. FNCBD-EGF substantially stimulated cell growth after binding to collagen-coated culture plates, whereas EGF had no effect, indicating that this fusion protein acted as a collagen-associated growth factor. In an animal model of impaired wound healing, FNCBD-EGF, but not EGF, was retained with collagen sponges at wound sites 4 d after implantation, and repair of epidermis was observed underneath the sponges. These results suggested that our fusion protein with high collagen affinity would be useful for wound healing.

Biodegradation of photosynthetically produced extracellular organic carbon from intertidal benthic algae.

14C-labeled extracellular products of a natural microphytobenthic community and two species of benthic diatoms (Nitzschia hybridaeformis and Amphora coffeaeformis) were fractionated into extracellular dissolved organic carbon (14C-EDOC), organic carbon extracted with EDTA (14C-EDTA-extractable OC) and extracellular polymeric substances (14C-EPS). The biodegradation of this labeled extracellular organic carbon by bacteria in sediments was examined to determine the processes of enzymatic degradation of photosynthetically-produced extracellular organic carbon from microphytobenthos in an intertidal flat ecosystem. In addition, primary production as well as extracellular enzyme activities (beta- and alpha-glucosidase) were measured to evaluate the possible relationship between organic carbon production and microbiological degradation at the Isshiki intertidal flat in Mikawa Bay, Japan. With all three 14C-fractions extracted from a natural microphytobenthic assemblage and two species of benthic diatoms, more than 50% of the added substrates were mineralized within 24 h by the bacterial community in sediments. At that time, the percentage of high-molecular-weight compounds (>5 K MW) to total MW compounds of 14C-EDTA-extractable OC and 14C-EPS fractions decreased within 24 h from 50.9 to 6.6% and 74.5 to 11.1%, respectively. In situ, beta- and alpha-glucosidase activity in sediment was higher than in the seawater column (at a depth of 1 m), though the photosynthetic production of microphytobenthos was equal to that of phytoplankton. Based on our previous studies that microphytobenthos produced much more extracellular products than phytoplankton, it is assumed from these results that carbon flowing into the microbial loop through the mediation of enzymatic degradation of extracellular products in a benthic system exceeds that in the overlying water column.

Treatment of acute stanford type B aortic dissection with a novel cylindrical balloon catheter in dogs.

BACKGROUND: Despite recent progress in medical and surgical treatment, acute type B aortic dissection still carries a high mortality rate. We have developed a novel cylindrical balloon catheter for less invasive treatment to block the entry of the dissection and induce thrombotic occlusion of the false lumen. The balloon has the shape of a sheet when deflated but a double-cylinder shape when inflated. Therefore, aortic blood flow is maintained through the cylindrical lumen during balloon inflation. METHODS AND RESULTS: Six beagle dogs underwent a left thoracotomy at the 6th intercostal space. An acute dissection of 4-cm length was created surgically on the descending aorta. The balloon catheter was inserted through the distal descending aorta and advanced to the entry site. The balloon catheter was inflated for 6 hours. The blood flow in the descending aorta and the position of the balloon was monitored by color Doppler echovasculography. Four dogs were killed humanely on the following day and 2 dogs 10 days after the surgery. The descending aorta was examined macroscopically and microscopically in all dogs. In all dogs, the false lumen was occluded by thrombi. Although no dog had clinical evidence of distal thromboembolism, 2 of the 4 dogs that were killed on the second postoperative day had fresh mural thrombi in the true lumen. CONCLUSIONS: The false lumen of the acute type B aortic dissection was effectively occluded by the novel cylindrical balloon catheter in the canine experimental model. The thrombus formation in the true lumen is the problem to be solved.

Articulatory function in patients who have undergone glossectomy with use of an artificial graft membrane.

OBJECTIVE: The purpose of this study was to investigate, by assessing speech intelligibility, the long-term usefulness of an artificial bilayer membrane as a mucosal substitute after glossectomy. STUDY DESIGN: Artificial membranes were grafted in 8 patients with intraoral defects after glossectomy. Five patients served as a control group and received only standard closure by suture after glossectomy. Speech intelligibility was evaluated by means of a standardized Japanese speech intelligibility test 6 months or more after the operation. RESULTS: The postoperative courses of all 13 patients were uneventful. Intelligibility scores of those who received grafts were better than those of the control group in the overall score, the glossal sounds score, and the rear portion sounds score. CONCLUSION: The artificial membrane was useful for the glossectomy as a long-term mucosal substitute, as well as for the short-term.

Autolysis of lentinan, an antitumor polysaccharide, during storage of Lentinus edodes, shiitake mushroom.

The lentinan contents in the Lentinus edodes fruit body during storage were examined by ELISA method using anti-lentinan antibodies. The lentinan content (12.8 mg.g(-)(1) dw) before storage decreased to 3.7 mg.g(-)(1) dw over 7 days at 20 degrees C. However, it only slightly decreased at 1 degrees C and only decreased to 9.3 mg. g(-)(1) dw at 5 degrees C. Glucanase activity, which seems to be associated with lentinan degradation, increased more during storage of L. edodes at 20 degrees C than it did at lower temperatures. In addition, only glucose was detected as a degraded product from lentinan by the glucanase. This suggested that this enzyme would fit the profile of an exo-type glucanase. Also, polyphenol oxidase activity, known as an index of freshness reduction in the mushroom, increased approximately 2.7-fold (to 61.5 units.mg(-)(1)) over 7 days during storage at 20 degrees C. However, its activity changed little during storage at lower temperatures. These results indicate that the reduction during storage of the quality of L. edodes as a functional food is accompanied by the decrease of lentinan, and by browning, and that exo-glucanase plays an important role in the decrease of lentinan content.

Accuracy of integration of dental casts in three-dimensional models.

PURPOSE: This study investigated errors occurring in three-dimensional (3D) models when plaster dental casts are integrated into them. MATERIALS AND METHODS: Three-dimensional milling models of three patients with a jaw deformity were fabricated using the Endoplan system (SPARC International Inc, Santa Clara, CA). After this, plaster dental casts were integrated into the 3D models using a face-bow transfer system. Two cephalograms were then compared, one obtained from the patient and the other obtained from the 3D model painted with contrast medium. RESULTS: In two cases, the reproducibility of the dental position as determined by angle analysis was within 2 degrees, and that determined by distance analysis was within 2 mm. However, errors over 4 degrees and 4.2 mm, respectively, were observed in one case. CONCLUSION: It is clinically important to confirm the accuracy of the 3D model by cephalometric analysis, and it may be necessary to reposition the dental model based on the results.