Piloting a Proficiency Testing Program for Laboratory Sampling of Animal Feed Materials.

BACKGROUND: Laboratory sampling is a significant source of error in feed testing. Proficiency testing programs such as the Association of American Feed Control Officials Proficiency Testing Program are an effective means of assessing error in and among analytical methods. However, all proficiency test items are comminuted and blended to control variability among items, effectively minimizing sampling error. Currently there is no mechanism for monitoring sampling error among laboratories. OBJECTIVE: The objective of this work was to investigate the feasibility of a proficiency testing program for laboratory sampling methods and provide insight into a program to advance the performance of sampling in laboratories. METHODS: The study involved the fabrication of identical feed test items from feed ingredients and shipping the uncomminuted materials to volunteer laboratories. The volunteer laboratories followed in-house procedures for selecting test portions for routine feed tests. Tests on all the test portions for a single analyte were performed by a single laboratory, so that the variability in test results could be attributed to laboratory sampling processes to select test portions. RESULTS: The average RSD, %, for Item A and Item B, respectively, were as follows: protein, 5.08 and 5.23; non-protein nitrogen, 8.90 and 16.6; crude fat, 3.45 and 5.67; vitamin A, 33.9 and 26.9; calcium, 21.9 and 23.6; zinc, 17.9 and 27.9; and copper, 17.4 and 27.9. CONCLUSION: This study suggests that a proficiency testing program for laboratory sampling is feasible with manual manufacture of the test items, and data can be used to monitor laboratory sampling proficiency and also to compare the performance of different laboratory sampling methods. HIGHLIGHTS: The data illustrates that each analyte has unique distributional and compositional heterogeneity, thus unique sampling error, even when multiple analytes are determined from a single test portion.

Determination of Phosphorus and Potassium in Commercial Inorganic Fertilizers by Inductively Coupled Plasma-Optical Emission Spectrometry: Single-Laboratory Validation, First Action 2015.18.

A previously validated method for the determination of both citrate-EDTA-soluble P and K and acid-soluble P and K in commercial inorganic fertilizers by inductively coupled plasma-optical emission spectrometry was submitted to the expert review panel (ERP) for fertilizers for consideration of First Action Official Method(SM) status. The ERP evaluated the single-laboratory validation results and recommended the method for First Action Official Method status and provided recommendations for achieving Final Action. Validation materials ranging from 4.4 to 52.4% P2O5 (1.7-22.7% P) and 3-62% K2O (2.5-51.1% K) were used for the validation. Recoveries from validation materials for citrate-soluble P and K ranged from 99.3 to 124.9% P and from 98.4 to 100.7% K. Recoveries from validation materials for acid-soluble "total" P and K ranged from 95.53 to 99.40% P and from 98.36 to 107.28% K. Values of r for citrate-soluble P and K, expressed as RSD, ranged from 0.28 to 1.30% for P and from 0.41 to 1.52% for K. Values of r for total P and K, expressed as RSD, ranged from 0.71 to 1.13% for P and from 0.39 to 1.18% for K. Based on the validation data, the ERP recommended the method (with alternatives for the citrate-soluble and the acid-soluble extractions) for First Action Official Method status and provided recommendations for achieving Final Action status.

Evaluation of a soil incubation method to characterize nitrogen release patterns of slow- and controlled-release fertilizers.

Several technologies have been proposed to characterize the nutrient release patterns of slow-release fertilizers (SRF) and controlled-release fertilizers (CRF) during the last few decades. These technologies have been developed mainly by manufacturers, and are product-specific, based on the regulation and analysis of each SRF and CRF product. Despite previous efforts to characterize SRF and CRF materials, no standardized, validated method exists to assess their nutrient release patterns. However, the increased production and distribution of these materials in specialty and nonspecialty markets requires an appropriate method to verify product claims and material performance. A soil incubation column leaching procedure was evaluated to determine its suitability as a standard method to estimate nitrogen (N) release patterns of SRFs and CRFs during 180 days. The influence of three soil/sand ratios, three incubation temperatures, and four soils on method behavior was assessed using five SRFs and three CRFs. In general, the highest soil/sand ratio increased the N release rate of all materials, but this effect was more marked for the SRFs. Temperature had the greatest influence on N release rates. For CRFs, the initial N release rates and the percentage N released/day increased as temperature increased. For SRFs, raising the temperature from 25 to 35 degreesC increased initial N release rate and the total cumulative N released, and almost doubled the percentage released/day. The percentage N released/day from all products generally increased as the texture of the soil changed from sandy to loamy (lowa>California>Pennsylvania>Florida). The soil incubation technique was demonstrated to be robust and reliable for characterizing N release patterns from SRFs and CRFs. The method was reproducible, and variations in soil/sand ratio, temperature, and soil had little effect on the results.

Optimization and validation of an accelerated laboratory extraction method to estimate nitrogen release patterns of slow- and controlled-release fertilizers.

Several technologies have been proposed to characterize the nutrient release and availability patterns of enhanced-efficiency fertilizers (EEFs), especially slow-release fertilizers (SRFs) and controlled-release fertilizers (CRFs) during the last few decades. These technologies have been developed mainly by manufacturers and are product-specific based on the regulation and analysis of each EEF product. Despite previous efforts to characterize EEF materials, no validated method exists to assess their nutrient release patterns. However, the increased use of EEFs in specialty and nonspecialty markets requires an appropriate method to verify nutrient claims and material performance. A series of experiments were conducted to evaluate the effect of temperature, fertilizer test portion size, and extraction time on the performance of a 74 h accelerated laboratory extraction method to measure SRF and CRF nutrient release profiles. Temperature was the only factor that influenced nutrient release rate, with a highly marked effect for phosphorus and to a lesser extent for nitrogen (N) and potassium. Based on the results, the optimal extraction temperature set was: Extraction No. 1-2:00 h at 25 degrees C; Extraction No. 2-2:00 h at 50 degrees C; Extraction No. 3-20:00 h at 55 degrees C; and Extraction No. 4-50:00 h at 60 degrees C. Ruggedness of the method was tested by evaluating the effect of small changes in seven selected factors on method behavior using a fractional multifactorial design. Overall, the method showed ruggedness for measuring N release rates of coated CRFs.

Statistical correlation of the soil incubation and the accelerated laboratory extraction methods to estimate nitrogen release rates of slow- and controlled-release fertilizers.

Several technologies have been proposed to characterize the nutrient release patterns of enhanced-efficiency fertilizers (EEFs) during the last few decades. These technologies have been developed mainly by manufacturers and are product-specific based on the regulation and analysis of each EEF product. Despite previous efforts to characterize nutrient release of slow-release fertilizer (SRF) and controlled-release fertilizer (CRF) materials, no official method exists to assess their nutrient release patterns. However, the increased production and distribution of EEFs in specialty and nonspecialty markets requires an appropriate method to verify nutrient claims and material performance. Nonlinear regression was used to establish a correlation between the data generated from a 180-day soil incubation-column leaching procedure and 74 h accelerated lab extraction method, and to develop a model that can predict the 180-day nitrogen (N) release curve for a specific SRF and CRF product based on the data from the accelerated laboratory extraction method. Based on the R2 > 0.90 obtained for most materials, results indicated that the data generated from the 74 h accelerated lab extraction method could be used to predict N release from the selected materials during 180 days, including those fertilizers that require biological activity for N release.

Simultaneous determination of arsenic, cadmium, calcium, chromium, cobalt, copper, iron, lead, magnesium, manganese, molybdenum, nickel, selenium, and zinc in fertilizers by microwave acid digestion and inductively coupled plasma-optical emission spectrometry detection: single-laboratory validation of a modification and extension of AOAC 2006.03.

A single-laboratory validation study was conducted for the simultaneous determination of arsenic, cadmium, calcium, cobalt, copper, chromium, iron, lead, magnesium, manganese, molybdenum, nickel, selenium, and zinc in all major types of commercial fertilizer products by microwave digestion and inductively coupled plasma-optical emission spectroscopy analysis. This validation study proposes an extension and modification of AOAC 2006.03. The extension is the inclusion of calcium, copper, iron, magnesium, manganese, and zinc, and the modification is incorporation of hydrochloric acid in the digestion system. This dual acid digestion utilizes both hydrochloric and nitric acids in a 3 to 9 mL volume ratio/100 mL. In addition to 15 of the 30 original validation materials used in the 2006.03 collaborative study, National Institute of Standards and Technology Standard Reference Material 695 and Magruder 2009-06 were incorporated as accuracy materials. The main benefits of this proposed method are a significant increase in laboratory efficiency when compared to the use of both AOAC Methods 965.09 and 2006.03 to achieve the same objective and an enhanced recovery of several metals.

Determination of oxytetracycline/oxytetracycline hydrochloride in animal feed, fish feed, and veterinary medicinal products by liquid chromatography with fluorescence detection: collaborative study.

A method for determining oxytetracycline (OTC) in animal feed, fish feed, and veterinary medicinal products at medicated use and contamination levels was collaboratively studied. The method is applicable to the analysis of animal feeds and mineral premixes containing levels > or =2 mg/kg, and fish feed containing levels > or =10 mg/kg. Oxytetracycline hydrochloride (OTC.HCI) is extracted from ground feed material in acid-methanol solution using mechanical agitation. After centrifugation for 5 min at 1230 x g, an aliquot of the extract is diluted with water andlor acid-methanol so that the concentration of OTC.HCI is approximately the same as that in the working standard, and the solutions contain at least 50% water. Injectable veterinary medicinal materials (also called animal remedy materials) are diluted with water andlor extractant to reach the target concentration. The extracts are filtered and analyzed by reversed-phase liquid chromatography with fluorescence detection with excitation at 390 nm and emission at 512 nm. Twenty-eight test samples of medicated feeds, supplements, and drug premixes, including 4 test samples for trace-level analysis, were sent to 17 collaborators in Canada, The Netherlands, and the United States. Results were received from 11 laboratories. The RSDr values (within-laboratory repeatability) ranged from 1.26 to 9.21%; RSDR values (among-laboratory reproducibility) ranged from 2.14 to 12.9%, and HorRat values ranged from 0.54 to 3.02. It is recommended that this method be adopted AOAC Official First Action.

Crude fat, hexanes extraction, in feed, cereal grain, and forage (Randall/Soxtec/submersion method): collaborative study.

A method for determining crude fat in animal feed, cereal grain, and forage (plant tissue) was collaboratively studied. Crude fat was extracted from the animal feed, cereal grain, or forage material with hexanes by the Randall method, also called the Soxtec method or the submersion method. The use of hexanes provides for an alternative to diethyl ether for fat extractions. The proposed submersion method considerably decreases the extraction time required to complete a batch of samples compared to Soxhlet. The increase in throughput is very desirable in the quest for faster turnaround times and the greater efficiency in the use of labor. In addition, this method provides for reclamation of the solvent as a step of the method. The submersion method for fat extraction was previously studied for meat and meat products and was accepted as AOAC Official Method 991.36. Fourteen blind samples were sent to 14 collaborators in the United States, Sweden, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.23 to 5.80% for crude fat. Among-laboratory (including within) relative standard deviation (reproducibility) ranged from 1.88 to 14.1%. The method is recommended for Official First Action.

Crude fat, diethyl ether extraction, in feed, cereal grain, and forage (Randall/Soxtec/submersion method): collaborative study.

A method for determining crude fat in animal feed, cereal grain, and forage (plant tissue) was collaboratively studied. Crude fat was extracted from the animal feed, cereal grain, or forage material with diethyl ether by the Randall method, also called the Soxtec method or the submersion method. The proposed submersion method considerably decreases the extraction time required to complete a batch of samples. The increase in throughput is very desirable in the quest for faster turnaround times and the greater efficiency in the use of labor. In addition, this method provides for reclamation of the solvent as a step of the method. The submersion method for fat extraction was previously studied for meat and meat products and was accepted as AOAC Official Method 991.36. Fourteen blind samples were sent to 12 collaborators in the United States, Sweden, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.09 to 9.26% for crude fat. Among-laboratory (including within) relative standard deviation (reproducibility) ranged from 1.0 to 21.0%. The method is recommended for Official First Action.

Determination of crude protein in animal feed, forage, grain, and oilseeds by using block digestion with a copper catalyst and steam distillation into boric acid: collaborative study.

A collaborative study was conducted to evaluate the repeatability and reproducibility of an extension of AOAC Official Method 991.20, Nitrogen (Crude) in Milk, to animal feed, forage (plant tissue), grain, and oilseed materials. Test portions are digested in an aluminum block at 420 degrees C in sulfuric acid with potassium sulfate and a copper catalyst. Digests are cooled and diluted, and concentrated sodium hydroxide is added to neutralize the acid and make the digest basic; the liberated ammonia is distilled by using steam distillation. The liberated ammonia is trapped in a weak boric acid solution and titrated with a stronger standardized acid, hydrochloric acid; colorimetric endpoint detection is used. Fourteen blind samples were sent to 13 collaborators in the United States, Denmark, Sweden, Germany, and the United Kingdom. Recoveries of nitrogen from lysine, tryptophan, and acetanilide were 86.8, 98.8, and 100.1%, respectively. The within-laboratory relative standard deviation (RSDr, repeatability) ranged from 0.40 to 2.38% for crude protein. The among-laboratories (including within-) relative standard deviation (RSD(R), reproducibility) ranged from 0.44 to 2.38%. It is recommended that the method be adopted First Action by AOAC INTERNATIONAL. A lower concentration (1% H3BO3) of trapping solution was compared with the concentration specified in the original protocol (4% H3BO3) and was found comparable for use in an automatic titration system in which titration begins automatically as soon as distillation starts. The Study Directors recommend that 1% H3BO3 as an optional alternative to 4% boric acid trapping solution be allowed for automatic titrators that titrate throughout the distillation.

Determination of water (moisture) and dry matter in animal feed, grain, and forage (plant tissue) by Karl Fischer titration: collaborative study.

A Karl Fischer method for determining water (dry matter) in animal feed and forages was collaboratively studied. Water was extracted from animal feed or forage material into methanol-formamide (1 + 1) directly in the Karl Fischer titration vessel by high-speed homogenization. The water was titrated at 50 degrees C with one-component Karl Fischer reagent based on imidazole. Ten blind samples were sent to 9 collaborators in the United States, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.14 to 6.99% for water or from 0.09 to 0.56% for dry matter. Among-laboratory (including within-) relative standard deviation (reproducibility) ranged from 5.35 to 10.73%, or from 0.44 to 0.77% for dry matter. The authors recommend that the method be adopted as Official First Action by AOAC INTERNATIONAL. A comparable alternative extraction procedure using boiling methanol is also recommended for Official First Action.