Preliminary study of all-solid-state batteries: Evaluation of blast formation during the thermal runaway.

All-solid-state batteries have been developed to increase energy density by replacing the lithiated graphite negative electrode by a lithium metal foil and to increase safety by removing the organic compounds. However, the safety issues of these batteries have received little attention up to now. The behavior of a reassembled all-solid-state battery under thermal stress was recorded by X-ray radiography and a high-speed camera. The thermal runaway (TR) lasted about 5 ms, thus extremely fast reaction kinetics. In comparison, the TR of a lithium-ion battery is about 500 ms. Furthermore, a 188-mbar aerial overpressure was measured using a piezoelectric sensor. Although this cell is not an explosive, 2.7 g TNT equivalent was calculated for it. This atypical behavior could have an impact on the casing or the battery pack. Therefore, it must be studied in greater detail.

Different methods in TiO2 photodegradation mechanism studies: gaseous and TiO2-adsorbed phases.

The development of photocatalysis processes offers a significant number of perspectives especially in gaseous phase depollution. It is proved that the photo-oxidizing properties of photocatalyst (TiO(2)) activated by UV plays an important role in the degradation of volatile organic compounds (VOC). Heterogeneous photocatalysis is based on the absorption of UV radiations by TiO(2). This phenomenon leads to the degradation and the oxidation of the compounds, according to a mechanism that associates the pollutant's adsorption on the photocatalyst and radical degradation reactions. The main objective of the study is the understanding of the TiO(2)-photocatalysis phenomenon including gaseous and adsorbed phase mechanisms. Results obtained with three different apparatus are compared; gaseous phases are analysed and mechanisms at the gaseous phase/photocatalyst interface are identified. This study leads to improve understanding of various mechanisms during pollutant photodegradation: adsorption of pollutants on TiO(2) first takes place, then desorption and/or photodegradation, and finally, desorption of degradation products on TiO(2). The association of analytical methods and different processes makes the determination of all parameters that affect the photocatalytic process possible. Mastering these parameters is fundamental for the design and construction of industrial size reactors that aim to purify the atmosphere.