Development of an adjoint sensitivity field-based treatment-planning technique for the use of newly designed directional LDR sources in brachytherapy.

The development and application of an automated 3D greedy heuristic (GH) optimization algorithm utilizing the adjoint sensitivity fields for treatment planning to assess the advantage of directional interstitial prostate brachytherapy is presented. Directional and isotropic dose kernels generated using Monte Carlo simulations based on Best Industries model 2301 I-125 source are utilized for treatment planning. The newly developed GH algorithm is employed for optimization of the treatment plans for seven interstitial prostate brachytherapy cases using mixed sources (directional brachytherapy) and using only isotropic sources (conventional brachytherapy). All treatment plans resulted in V100 > 98% and D90 > 45 Gy for the target prostate region. For the urethra region, the D10(Ur), D90(Ur) and V150(Ur) and for the rectum region the V100cc, D2cc, D90(Re) and V90(Re) all are reduced significantly when mixed sources brachytherapy is used employing directional sources. The simulations demonstrated that the use of directional sources in the low dose-rate (LDR) brachytherapy of the prostate clearly benefits in sparing the urethra and the rectum sensitive structures from overdose. The time taken for a conventional treatment plan is less than three seconds, while the time taken for a mixed source treatment plan is less than nine seconds, as tested on an Intel Core2 Duo 2.2 GHz processor with 1GB RAM. The new 3D GH algorithm is successful in generating a feasible LDR brachytherapy treatment planning solution with an extra degree of freedom, i.e. directionality in very little time.

SU-E-T-319: Monte Carlo Characterization of a New Directional Pd-103 High Dose Rate Source for Brachytherapy Application.

PURPOSE: Standard brachytherapy sources emit radiation in a non-preferential direction away from the source. Though treatment outcomes are good, this can lead to late skin and subcutaneous toxicities in sensitive structures. Proposed low dose rate directional sources for interstitial brachytherapy, showed to have an improvement in the dose uniformity within the subcutaneous volume, reduction in skin dose, and reduction in volume receiving dose outside the target. The objective of this work is to demonstrate the potential use of a new Pd-103 directional seed for application in high dose rate brachytherapy treatments. METHODS: Monte Carlo simulations were performed using the MCNP5 F6 energy deposition tallies as well as the MCNP5 F4 flux density tallies placed around a partially shielded Pd-103 source at angles(deg): 0, 45, 90, 135, 180, 225, 270, 315 as well as radial distances (cm): 0.5, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 9, 10. The source that modeled was a Pd-103 core using TG-43U recommended nuclear data, with a diameter = 1.4 mm, active length = 1.0 cm. In addition osmium metal with .03 mm thickness was used as shielding material to cover half of the cylindrical surface of the Pd-103 volume. The seed was encapsulated using .05 mm thick titanium. RESULTS: MCNP models show that the dose to the radial distances, corresponding to the osmium shielded side, are dramatically reduced to less than 4% of the total dose. CONCLUSIONS: The potential of a Pd-103 directional brachytherapy source has been studied. The results show that a seed with a partially shielded volume can be exploited to reduce side effects associated with radiation therapy to sensitive structures surrounding target volumes.

Technical note: the calibration of 90Y-labeled SIR-Spheres using a nondestructive spectroscopic assay.

90Y-labeled SIR-Spheres are currently used to treat patients with hepatic metastases secondary to colorectal adenocarcinoma. In general, the prescribed activity is based on empirical data collected during clinical trials. The activity of the source vial is labeled by the manufacturer as 3.0 GBq +/- 10% and is not independently verified by the end user. This technical note shows that the results of a nondestructive spectroscopic assay of a SIR-Spheres sample was 26% higher than the activity stated by the manufacturer. This difference should not impact the current empirical prescription method but may be problematic for patient-specific dosimetry applications, such as image-based dosimetry.

18F-labeled resin microspheres as surrogates for 90Y resin microspheres used in the treatment of hepatic tumors: a radiolabeling and PET validation study.

(90)Y-labeled resin microspheres (SIR-Spheres) are currently used to treat patients with primary and metastatic solid liver tumors. This treatment is typically palliative since patients have exhausted all other standard treatment options. Improving the quality of life and extending patient survival are typical benchmarks for tracking patient response. However, the current method for predicting microsphere biodistributions with (99m)Tc-labeled macroaggregated albumin (MAA) does not correlate well with patient response. This work presents the development of a new (18)F-labeled resin microsphere to serve as a surrogate for the treatment microsphere and to employ the superior resolution and sensitivity of positron emission tomography (PET). The (18)F microsphere biodistributions were determined in a rabbit using PET imaging and histological review. The PET-based uptake ratio was shown to agree with the histological findings to better than 3%. In addition, the radiolabeling process was shown to be rapid, efficient and relatively stable in vivo.

Observations on rotating needle insertions using a brachytherapy robot.

A robot designed for prostate brachytherapy implantations has the potential to greatly improve treatment success. Much of the research in robotic surgery focuses on measuring accuracy. However, there exist many factors that must be optimized before an analysis of needle placement accuracy can be determined. Some of these parameters include choice of the needle type, insertion velocity, usefulness of the rotating needle and rotation speed. These parameters may affect the force at which the needle interacts with the tissue. A reduction in force has been shown to decrease the compression of the prostate and potentially increase the accuracy of seed position. Rotating the needle as it is inserted may reduce frictional forces while increasing accuracy. However, needle rotations are considered to increase tissue damage due to the drilling nature of the insertion. We explore many of the factors involved in optimizing a brachytherapy robot, and the potential effects each parameter may have on the procedure. We also investigate the interaction of rotating needles in gel and suggest the rotate-cannula-only method of conical needle insertion to minimize any tissue damage while still maintaining the benefits of reduced force and increased accuracy.

Multi-species prostate implant treatment plans incorporating 192Ir and 125I using a Greedy Heuristic based 3D optimization algorithm.

The goals of interstitial implant brachytherapy include delivery of the target dose in a uniform manner while sparing sensitive structures, and minimizing the number of needles and sources. We investigated the use of a multi-species source arrangement (192Ir with 125I) for treatment in interstitial prostate brachytherapy. The algorithm utilizes an "adjoint ratio," which provides a means of ranking source positions and is the criterion for the Greedy Heuristic optimization. Three cases were compared, each using 0.4 mCi 125I seeds: case I is the base case using 125I alone, case II uses 0.12 mCi 192Ir seeds mixed with 125I, and case III uses 0.25 mCi 192Ir mixed with 125I. Both multi-species cases result in lower exposure of the urethra and central prostate region. Compared with the base case, the exposure to the rectum and normal tissue increases by a significant amount for case III as compared with the increase in case II, signifying the effect of slower dose falloff rate of higher energy gammas of 192Ir in the tissue. The number of seeds and needles decreases in both multi-species cases, with case III requiring fewer seeds and needles than case II. Further, the effect of 192Ir on uniformity was investigated using the 0.12 mCi 192Ir seeds in multi-species implants. An increase in uniformity was observed with an increase in the number of 0.12 mCi 1921r seeds implanted. The effects of prostate size on the evaluation parameters for multi-species implants were investigated using 0.12 mCi 192Ir and 0.4 mCi 125I, and an acceptable treatment plan with increased uniformity was obtained.

A new internal pair production branching ratio of 90Y: the development of a non-destructive assay for 90Y and 90Sr.

(90)Y is utilized as a therapeutic radioisotope in radiolabeled monoclonal antibodies and in microspheres for targeted radiation therapy of the liver. Currently, the widely used dose calibrator assay of (90)Y can have uncertainties exceeding +/-10%. A non-destructive assay using spectroscopy is possible by reducing the currently published uncertainty (+/-12%) in the internal pair production branching ratio for the 0(+)-0(+) transition of (90)Zr. A high-purity germanium detector was used to determine the branching ratio to be (31.86+/-0.47) x 10(-6).

Comparison of two planning systems for HDR brachytherapy gynecological application.

PURPOSE: This report compares the Nucletron NPS and PLATO planning system for patients treated for cervix cancer. MATERIALS AND METHODS: This study compares calculations generated using the older NPS (version 11.43) planning system and the more recent PLATO (version 14.1) system for two cases: 1) a single dwell position and 2) an actual patient application using a tandem and ovoid. RESULTS: For one dwell position: for NPS planning the dose for points along the source axis forward of the cable was 9.85% more than for symmetrically placed points in the cable direction. For PLATO, the same test gave rise to a difference of 10.2%. Comparing the two systems, NPS calculated doses for points in the forward direction 14% greater than those calculated by PLATO. The entry of points using the digitizer accounted for less than 1% of any difference. For the patient case: the dose difference between NPS and PLATO planning for all patient reference points entered from films ranged from 1 to 4%. The difference in dose between optimized and nonoptimized planning was approximately 0.5% for prescription points (points A), while for the bladder and rectum the differences were 6% and 20%, respectively with NPS, and with PLATO, 8% and 22%, respectively. CONCLUSION: This study highlighted the effects of the differences in the calculational algorithm between the older and newer planning systems from Nucletron. While the differences were minimal on the perpendicular bisector of the source, along the axis they become considerable. In a practical gynecological case, these differences mostly affect the dose to the rectum, since that organ receives the greatest proportion of its dose from rays near the same axis. Overall, the PLATO system plan required about 2.5% less integrated reference air kerma than the NPS plan for the same dose to point A. For either planning system, optimization is crucial in decreasing dose to bladder and rectal points.

The water-equivalence of phantom materials for 90Sr-90Y beta particles.

Intravascular brachytherapy requires that the dose be specified within millimeters of the source. High dose gradients near brachytherapy sources require that the source-detector distance be accurately known for dosimetry purposes. Solid phantoms can be designed to accommodate these stringent requirements. This study reports dosimeter readings from 90Sr-90Y sources measured in water, A150, polystyrene and in an epoxy-based water-equivalent plastic. Measurements showed that while A150 and the epoxy-based plastic agreed well with water when the surface of the source contacted the detector housing, the relative response in the phantoms decreased with increasing depth in phantom, falling to approximately 0.55 those of water at a depth of 5 mm. Readings in polystyrene were within 4% of those in water between 1 and 2 mm depth. However, while polystyrene followed water more closely than the other two materials, at greater depths the relative response in polystyrene to water varied from 0.65 to 1.34. When the density of the materials is accounted for, the relative response in A150 is nearly constant with increasing areal density. Furthermore, the response in A150 shows the closest agreement with that in water of any of the solid materials for higher areal densities. For values below 0.3 g/cm2, polystyrene shows the closest agreement with water.