Heteropolyaromatic Covalent Organic Frameworks via One-Pot Multicomponent Reactions.

Multicomponent reactions (MCRs) offer a platform to create different chemical structures and linkages for highly stable covalent organic frameworks (COFs). As an illustrative example, the multicomponent Povarov reaction generates 2,4-phenylquinoline from aldehydes and amines in the presence of electron-rich alkenes. In this study, we introduce a new domino reaction to generate unprecedented 2,3-phenylquinoline COFs in the presence of epoxystyrene. This work thus presents, for the first time, structural isomeric COFs produced by multicomponent domino and Povarov reactions. Furthermore, 2,3-phenylquinolines can undergo a Scholl reaction to form extended aromatic linkages. With this approach, we synthesize two thermally and chemically stable MCR-COFs and two heteropolyaromatic COFs using both domino and in situ domino and Scholl reactions. The structure and properties of these COFs are compared with the corresponding 2,4-phenylquinoline-linked COF and imine-COF, and their activity toward benzene and cyclohexane sorption and separation is investigated. The position of the pendant phenyl groups within the COF pore plays a crucial role in facilitating the industrially important sorption and separation of benzene over cyclohexane. This study opens a new avenue to construct heteropolyaromatic COFs via MCR reactions.

Unveiling pH-Dependent Adsorption Strength of *CO2 - Intermediate over High-Density Sn Single Atom Catalyst for Acidic CO2-to-HCOOH Electroreduction.

The acidic electrochemical CO2 reduction reaction (CO2RR) for direct formic acid (HCOOH) production holds promise in meeting the carbon-neutral target, yet its performance is hindered by the competing hydrogen evolution reaction (HER). Understanding the adsorption strength of the key intermediates in acidic electrolyte is indispensable to favor CO2RR over HER. In this work, high-density Sn single atom catalysts (SACs) were prepared and used as catalyst, to reveal the pH-dependent adsorption strength and coverage of *CO2 - intermediatethat enables enhanced acidic CO2RR towards direct HCOOH production. At pH=3, Sn SACs could deliver a high Faradaic efficiency (90.8 %) of HCOOH formation and a corresponding partial current density up to -178.5 mA cm-2. The detailed in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic studies reveal that a favorable alkaline microenvironment for CO2RR to HCOOH is formed near the surface of Sn SACs, even in the acidic electrolyte. More importantly, the pH-dependent adsorption strength of *CO2 - intermediate is unravelled over the Sn SACs, which in turn affects the competition between HER and CO2RR in acidic electrolyte.

Bioinspired Gradient Covalent Organic Framework Membranes for Ultrafast and Asymmetric Solvent Transport.

Gradients play a pivotal role in membrane technologies, e.g., osmotic energy conversion, desalination, biomimetic actuation, selective separation, and more. In these applications, the compositional gradients are of great relevance for successful function implementation, ranging from solvent separation to smart devices; However, the construction of functional gradient in membranes is still challenging both in scale and directions. Inspired by the specific function-related, graded porous structures in glomerular filtration membranes, a general approach for constructing gradient covalent organic framework membranes (GCOMx) applying poly (ionic liquid)s (PILs) as template is reported here. With graded distribution of highly porous covalent organic framework (COF) crystals along the membrane, GCOMx exhibts an unprecedented asymmetric solvent transport when applying different membrane sides as the solvent feed surface during filtration, leading to a much-enhanced flux (10-18 times) of the "large-to-small" pore flow comparing to the reverse direction, verified by hydromechanical theoretical calculations. Upon systematic experiments, GCOMx achieves superior permeance in nonpolar (hexane ≈260.45 LMH bar-1) and polar (methanol ≈175.93 LMH bar-1) solvents, together with narrow molecular weight cut-off (MWCO, 472 g mol-1) and molecular weight retention onset (MWRO, <182 g mol-1). Interestingly, GCOMx shows significant filtration performance in simulated kidney dialysis, revealing great potential of GCOMx in bionic applications.

Polyoxometalate-Structured Materials: Molecular Fundamentals and Electrocatalytic Roles in Energy Conversion.

Polyoxometalates (POMs), a kind of molecular metal oxide cluster with unique physical-chemical properties, have made essential contributions to creating efficient and robust electrocatalysts in renewable energy systems. Due to the fundamental advantages of POMs, such as the diversity of molecular structures and large numbers of redox active sites, numerous efforts have been devoted to extending their application areas. Up to now, various strategies of assembling POM molecules into superstructures, supporting POMs on heterogeneous substrates, and POMs-derived metal compounds have been developed for synthesizing electrocatalysts. From a multidisciplinary perspective, the latest advances in creating POM-structured materials with a unique focus on their molecular fundamentals, electrocatalytic roles, and the recent breakthroughs of POMs and POM-derived electrocatalysts, are systematically summarized. Notably, this paper focuses on exposing the current states, essences, and mechanisms of how POM-structured materials influence their electrocatalytic activities and discloses the critical requirements for future developments. The future challenges, objectives, comparisons, and perspectives for creating POM-structured materials are also systematically discussed. It is anticipated that this review will offer a substantial impact on stimulating interdisciplinary efforts for the prosperities and widespread utilizations of POM-structured materials in electrocatalysis.

Ligating Catalytically Active Peptides onto Microporous Polymers: A General Route Toward Specifically-Functional High Surface Area Platforms.

A versatile post-synthetic modification strategy to functionalize a high surface area microporous network (MPN-OH) by bio-orthogonal inverse electron-demand Diels-Alder (IEDDA) ligation is presented. While the polymer matrix is modified with a readily accessible norbornene isocyanate (Nor-NCO), a series of functional units presenting the robust asymmetric 1,2,4,5-tetrazine (Tz) allows easy functionalization of the MPN by chemoselective Nor/Tz ligation. A generic route is demonstrated, modulating the internal interfaces by introducing carboxylates, amides or amino acids as well as an oligopeptide d-Pro-Pro-Glu organocatalyst. The MPN-Pz-Peptide construct largely retains the catalytic activity and selectivity in an enantioselective enamine catalysis, demonstrates remarkable availability in different solvents, offers heterogeneous organocatalysis in bulk and shows stability in recycling settings.

A Triphenylphosphine-Based Microporous Polymer for a Wittig Reaction Cycle in the Solid State.

The Wittig reaction is a key step in industrial processes to synthesise large quantities of vitamin A and various other important chemicals that are used in daily life. This article presents a pathway to achieve the Wittig reaction in a solid network. A highly porous triphenylphosphine-based polymer was applied as a solid Wittig reagent that undergoes, in a multi-step cycle, in total six post-synthetic modifications. This allowed for regeneration of the solid Wittig reagent and reuse for the same reaction cycle. Of particular industrial relevance is that the newly developed material also enables a simple way of separating the product by filtration. Therefore, additional costly and difficult separation and purification steps are no longer needed.

A Thiazole-linked Covalent Organic Framework for Lithium-Sulphur Batteries.

Lithium-sulphur (Li-S) batteries are a promising alternative power source, as they can provide a higher energy density than current lithium-ion batteries. Porous materials are often used as cathode materials as they can act as a host for sulphur in such batteries. Recently, covalent organic frameworks (COFs) have also been used, however they typically suffer from stability issues, resulting in limited and thus insufficient durability under practical conditions and applications. Herein, we report the synthesis of a crystalline and porous imine-linked triazine-based dimethoxybenzo-dithiophene functionalized COF (TTT-DMTD) incorporating high-density redox sites. The imine linkages were further post-synthetically transformed to yield a robust thiazole-linked COF (THZ-DMTD) by utilizing a sulphur-assisted chemical conversion method, while maintaining the crystallinity. As a synergistic effect of its high crystallinity, porosity and the presence of redox-active moieties, the thiazole-linked THZ-DMTD exhibited a high capacity and long-term stability (642 mAh g-1 at 1.0 C; 78.9 % capacity retention after 200 cycles) when applied as a cathode material in a Li-S battery.

Solar Light Driven H2 O2 Production and Selective Oxidations Using a Covalent Organic Framework Photocatalyst Prepared by a Multicomponent Reaction.

A chemically stable 2D microporous COF (PMCR-1) was synthesized via the multicomponent Povarov reaction. PMCR-1 exhibits a remarkable and long-term stable photocatalytic H2 O2 production rate (60 h) from pure and sea water under visible light. The H2 O2 production is markedly enhanced when benzyl alcohol (BA) is added as reductant, which is also due to a strong π-π interaction of BA with dangling phenyl moieties in the COF pores introduced by the multicomponent Povarov reaction. Motivated by the concomitant BA oxidation to benzaldehyde during H2 O2 formation, the photocatalytic oxidation of various organic substrates such as benzyl amine and methyl sulfide derivatives was investigated. It is shown that the well-defined micropores of PMCR-1 enable size-selective photocatalytic oxidation.

Linker Exchange as Facile Method for Post-Synthetic Modification of ß-Ketoenamine-linked Covalent Organic Frameworks.

Post-synthetic linker exchange performed on covalent organic frameworks (COFs) has become an important method to introduce functional building blocks into their backbone and thus to tune their chemical and physical properties. However, the linker exchange method has so far only been described for COFs with relatively weak linkages like imines. Herein, it is shown that this method can be also used for a post-synthetic linker exchange reaction on a ß-ketoenamine linked COF. The time needed to achieve considerable linker exchange is much prolonged compared to other COFs with less stable linkages, however, this enables to achieve very good control on the ratio of the respective building blocks within the framework.

Construction of Covalent Organic Framework Nanofiber Membranes for Efficient Adsorption of Antibiotics.

Techniques beyond crystal engineering are critical for manufacturing covalent organic frameworks (COFs) and to explore them for advanced applications. However, COFs are normally obtained as insoluble, unmeltable, and thus nonprocessible microcrystalline powders. Therefore, it is a significant challenge to implement COFs into larger architectures and structural control on different length scales. Herein, a facile strategy is presented to prepare flexible COF nanofiber membranes by in-situ growth of COFs on polyacrylonitrile (PAN) nanofiber substrates via a reversible polycondensation-termination approach. The obtained PAN@COF nanofiber membranes with vertically aligned COF nanoplates combine a large functional surface with efficient mass transport, thus making it a promising adsorbent, for example, for water purification. The antibiotic pollutant ofloxacin (OFX) is removed from water with a superior absorption capacity of ≈236 mg g-1 and removal efficiency as high as 98%. The here presented in-situ growth of COFs on nanofiber membranes can be extended to various Schiff base-derived COF materials with different compositions, providing a highly efficient way to construct flexible COF-based membranes for several applications.

CuNi Nanoalloys with Tunable Composition and Oxygen Defects for the Enhancement of the Oxygen Evolution Reaction.

Colloidal synthesis is an excellent tool for the study of cooperative effects in nanoalloys. In this work, bimetallic CuNi nanoparticles of defined size and composition are fully characterized and tested for the oxygen evolution reaction. Copper addition to nickel leads to modifications in the structural and electronic properties, showing a higher concentration of surface oxygen defects and formation of active Ni3+ sites under reaction conditions. The ratio OV /OL between oxygen vacancies and lattice oxygen shows a clear correlation with the overpotential, being an excellent descriptor of the electrocatalytic activity. This is attributed to modifications in the crystalline structure, leading to lattice strain and grain size effects. Bimetallic Cu50 Ni50 NP showed the lowest overpotential (318 mV vs RHE), low Tafel slope (63.9 mV dec-1 ), and excellent stability. This work unravels the relative concentration between oxygen defects and lattice oxygen (OV /OL ) as an excellent descriptor of the catalytic activity of bimetallic precatalysts.

Core-Sheath Pt-CeO2/Mesoporous SiO2 Electrospun Nanofibers as Catalysts for the Reverse Water Gas Shift Reaction.

One-dimensional (1D) core-sheath nanofibers, platinum (Pt)-loaded ceria (CeO2) sheath on mesoporous silica (SiO2) core were fabricated, characterized, and used as catalysts for the reverse water gas shift reaction (RWGS). CeO2 nanofibers (NFs) were first prepared by electrospinning (ES), and then Pt nanoparticles were loaded on the CeO2 NFs using two different deposition methods: wet impregnation and solvothermal. A mesoporous SiO2 sheath layer was then deposited by sol-gel process. The phase composition, structural, and morphological properties of synthesized materials were investigated by scanning electron microscope (SEM), scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), nitrogen adsorption/desorption method, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma-optical emission spectrometry (ICP-OES) analysis, and CO2 temperature programmed desorption (CO2-TPD). The results of these characterization techniques revealed that the core-sheath NFs with a core diameter between 100 and 300 nm and a sheath thickness of about 40-100 nm with a Pt loading of around 0.5 wt.% were successfully obtained. The impregnated catalyst, Pt-CeO2 NF@mesoporous SiO2, showed the best catalytic performance with a CO2 conversion of 8.9% at 350 °C, as compared to the sample prepared by the Solvothermal method. More than 99% selectivity of CO was achieved for all core-sheath NF-catalysts.

Integrating Bifunctionality and Chemical Stability in Covalent Organic Frameworks via One-Pot Multicomponent Reactions for Solar-Driven H2O2 Production.

Multicomponent reactions (MCRs) can be used to introduce different functionalities into highly stable covalent organic frameworks (COFs). In this work, the irreversible three-component Doebner reaction is utilized to synthesize four chemically stable quinoline-4-carboxylic acid DMCR-COFs (DMCR-1-3 and DMCR-1NH) equipped with an acid-base bifunctionality. These DMCR-COFs show superior photocatalytic H2O2 evolution (one of the most important industrial oxidants) compared to the imine COF analogue (Imine-1). This is achieved with sacrificial oxidants but also in pure water and under an oxygen or air atmosphere. Furthermore, the DMCR-COFs show high photostability, durability, and recyclability. MCR-COFs thus provide a viable materials' platform for solar to chemical energy conversion.

Emerging Materials for Interfacial Solar-Driven Water Purification.

Solar-driven water purification is considered as an effective and sustainable technology for water treatment using green solar energy. One major goal for practical applications is to improve the solar evaporation performance by the design of novel photothermal materials, with optimized heat localization and water transport pathways to achieve reduced energy consumption for water vaporization. Recently, some emerging materials like polymers, metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and also single molecules were employed to construct novel solar evaporation systems. In this minireview, we present an overview of the recent efforts on materials development for water purification systems. The state-of-the-art applications of these emerging materials for solar-driven water treatment, including desalination, wastewater purification, sterilization and energy production, are also summarized.

Programmable Photocatalytic Activity of Multicomponent Covalent Organic Frameworks Used as Metallaphotocatalysts.

The multicomponent approach allows to incorporate several functionalities into a single covalent organic framework (COF) and consequently allows the construction of bifunctional materials for cooperative catalysis. The well-defined structure of such multicomponent COFs is furthermore ideally suited for structure-activity relationship studies. We report a series of multicomponent COFs that contain acridine- and 2,2'-bipyridine linkers connected through 1,3,5-benzenetrialdehyde derivatives. The acridine motif is responsible for broad light absorption, while the bipyridine unit enables complexation of nickel catalysts. These features enable the usage of the framework materials as catalysts for light-mediated carbon-heteroatom cross-couplings. Variation of the node units shows that the catalytic activity correlates to the keto-enamine tautomer isomerism. This allows switching between high charge-carrier mobility and persistent, localized charge-separated species depending on the nodes, a tool to tailor the materials for specific reactions. Moreover, nickel-loaded COFs are recyclable and catalyze cross-couplings even using red light irradiation.

Constitutional isomerism of the linkages in donor-acceptor covalent organic frameworks and its impact on photocatalysis.

When new covalent organic frameworks (COFs) are designed, the main efforts are typically focused on selecting specific building blocks with certain geometries and properties to control the structure and function of the final COFs. The nature of the linkage (imine, boroxine, vinyl, etc.) between these building blocks naturally also defines their properties. However, besides the linkage type, the orientation, i.e., the constitutional isomerism of these linkages, has rarely been considered so far as an essential aspect. In this work, three pairs of constitutionally isomeric imine-linked donor-acceptor (D-A) COFs are synthesized, which are different in the orientation of the imine bonds (D-C=N-A (DCNA) and D-N=C-A (DNCA)). The constitutional isomers show substantial differences in their photophysical properties and consequently in their photocatalytic performance. Indeed, all DCNA COFs show enhanced photocatalytic H2 evolution performance than the corresponding DNCA COFs. Besides the imine COFs shown here, it can be concluded that the proposed concept of constitutional isomerism of linkages in COFs is quite universal and should be considered when designing and tuning the properties of COFs.

Intraligand Charge Transfer Enables Visible-Light-Mediated Nickel-Catalyzed Cross-Coupling Reactions.

We demonstrate that several visible-light-mediated carbon-heteroatom cross-coupling reactions can be carried out using a photoactive NiII precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl2 ). The activation of this precatalyst towards cross-coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light-responsive nickel complexes that undergo metal-to-ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross-coupling reactions. The heterogeneous catalyst shows stable performance in a packed-bed flow reactor during a week of continuous operation.

Impact of Carbon N-Doping and Pyridinic-N Content on the Fuel Cell Performance and Durability of Carbon-Supported Pt Nanoparticle Catalysts.

Cathode catalyst layers of proton exchange membrane fuel cells (PEMFCs) typically consist of carbon-supported platinum catalysts with varying weight ratios of proton-conducting ionomers. N-Doping of carbon support materials is proposed to enhance the performance and durability of the cathode layer under operating conditions in a PEMFC. However, a detailed understanding of the contributing N-moieties is missing. Here, we report the successful synthesis and fuel cell implementation of Pt electrocatalysts supported on N-doped carbons, with a focus on the analysis of the N-induced effect on catalyst performance and durability. A customized fluidized bed reduction reactor was used to synthesize highly monodisperse Pt nanoparticles deposited on N-doped carbons (N-C), the catalytic oxygen reduction reaction activity and stability of which matched those of state-of-the-art PEMFC catalysts. Operando high-energy X-ray diffraction experiments were conducted using a fourth generation storage ring; the light of extreme brilliance and coherence allows investigating the impact of N-doping on the degradation behavior of the Pt/N-C catalysts. Tests in liquid electrolytes were compared with tests in membrane electrode assemblies in single-cell PEMFCs. Our analysis refines earlier views on the subject of N-doped carbon catalyst supports: it provides evidence that heteroatom doping and thus the incorporation of defects into the carbon backbone do not mitigate the carbon corrosion during high-potential cycling (1-1.5 V) and, however, can promote the cell performance under usual PEMFC operating conditions (0.6-0.9 V).

Finding the Sweet Spot of Photocatalysis─A Case Study Using Bipyridine-Based CTFs.

Covalent triazine frameworks (CTFs) are a class of porous organic polymers that continuously attract growing interest because of their outstanding chemical and physical properties. However, the control of extended porous organic framework structures at the molecular scale for a precise adjustment of their properties has hardly been achieved so far. Here, we present a series of bipyridine-based CTFs synthesized through polycondensation, in which the sequence of specific building blocks is well controlled. The reported synthetic strategy allows us to tailor the physicochemical features of the CTF materials, including the nitrogen content, the apparent specific surface area, and optoelectronic properties. Based on a comprehensive analytical investigation, we demonstrate a direct correlation of the CTF bipyridine content with the material features such as the specific surface area, band gap, charge separation, and surface wettability with water. The entirety of these parameters dictates the catalytic activity as demonstrated for the photocatalytic hydrogen evolution reaction (HER). The material with the optimal balance between optoelectronic properties and highest hydrophilicity enables HER production rates of up to 7.2 mmol/(h·g) under visible light irradiation and in the presence of a platinum cocatalyst.

A Covalent Organic Framework/Graphene Dual-Region Hydrogel for Enhanced Solar-Driven Water Generation.

Solar-driven water generation is a sustainable water treatment technology, helping to relieve global water scarcity issues. However, this technology faces great challenges due to the high energy consumption of water evaporation yielding low evaporation rates. Here, a covalent organic framework (COF)/graphene dual-region hydrogel, containing hydrophilic and hydrophobic regions in one material, is developed through a facile in situ growth strategy. The hydrophilic COF is covering parts of the hydrophobic graphene regions. Through accurate control of both wetting regions, the hybrid hydrogel shows effective light-harvesting, tunable wettability, optimized water content, and lowered energy demand for water vaporization. Acting as solar absorber, the dual-region hydrogel exhibits a steam generation rate as high as 3.69 kg m-2 h-1 under 1 sun irradiation (1 kW m-2), which competes well with other state-of-the-art materials. Furthermore, this hydrogel evaporator can be used to produce drinkable water from seawater and sewage, demonstrating the potential for water treatment.