Synthesis and characterization of faujasite zeolite membrane for selective enrichment of Arthrobacter sp. in synthetic wastewater.

This paper centers on the preparation and characterization of both a clay support and a faujasite zeolite membrane. Additionally, the study explores the development of bacterial media to assess the performance of these prepared membranes. The faujasite zeolite membrane was created using the hydrothermal method, involving the deposition of a faujasite layer to fine-tune the pore sizes of the clay support. The clay supports were crafted from clay which was sieved to particle size Φ ≤ 63 µm, and compacted with 3.0 wt.% activated carbon, then sintered at 1,000 °C. Distilled water fluxes revealed a decrease from 1,500 L m-2 h-1 to a minimum of 412 L m-2 h-1 after 180 min of filtration. Both membranes were characterized by XRF, XRD, FTIR, adsorption-desorption of nitrogen (N2), and SEM-EDS. PCR technique was used for the identification of the isolated Arthrobacter sp., and the retention of the bacteria on the clay support and the faujasite zeolite membrane were found to be 96 and 99%, respectively. The results showed that the faujasite zeolite membrane passed the clay support due to a narrow pore size of the faujasite zeolite membrane of 2.28 nm compared to 3.55 nm for the clay supports.

Valorization of crude olive stone in the removing of polyphenols from crude olive mill wastewater: kinetic, isotherm and mechanism study.

Removal of polyphenols from crude olive mill wastewaters (COMWW) is vital to the development of olive industries. In addition, the exploitation of the residue of the olive oil industry such as crude olive stone (COS) constitutes a valorization of this substance and makes a contribution to the fight against environmental pollution. For this purpose, this study concerns the utilization of COS as an adsorbent of polyphenols from COMWW. The characterization of COS was realized by FTIR, XRD, SEM, PZN, BET and TGA-DTA. The adsorption kinetics and isotherms of polyphenols was analyzed by pseudo-first-order (PFO), pseudo-second-order (PSO), intraparticle diffusion models (MW) and nonlinear models of isotherms Langmuir (LM) and Freundlich (FM) respectively. This study goal at understanding the adsorption mechanism of polyphenols on COS by FTIR and XRD study. The results of adsorption kinetics demonstred that the adsorption capacity of polyphenols 'PP' onto COS is decreased from 381 mg g-1 to 235 mg g-1, with the increasing of the temperature, from 25 °C to 45 °C, indicating an exothermic process, which is confirmed by the negative values of enthalpy ΔH°. Moreover, the negative values of free energy ΔG° and entropy ΔS° indicate the spontaneous and ordered adsorption phenomenon. Kinetic and isotherms studies showed that polyphenols adsorption onto crude olive stone followed PSO kinetic, the FM and LM models were the best fitted. Consequently, this study indicates that crude olive stone could be used as a cheap adsorbent for removing of polyphenols from crude COMWW.

Study of the permeability of tubular mineral membranes: application to wastewater treatment.

This research work opens up the possibility of developing tubular mineral membranes from Moroccan clay powders and their use in water permeability tests and wastewater treatment. The aim is to show the possibility of using clay as a low-cost raw material for the production of ceramic membranes with high mechanical and chemical performances. In a first step, we developed ceramic membranes by extruding a prepared plastic paste with the addition of an optimized amount of wood powder as organic matter (OM) to improve the porosity characteristics of the final products after firing. Several parameters are controlled such as the chemical and mineralogical composition of the starting clay powder, the granulometry and the final sintering temperature. The effect of sintering temperature in the range from 800 to 1000 °C, and OM addition (5, 10, 15wt%) on tubular membrane properties such as mechanical and chemical resistance, porosity and permeability were investigated. It was found that the incorporation of OM in the raw clay enhance the pore volume and the permeate flux but it was also accompanied by a decrease in mechanical strength. The membrane sintered at 1000 °C with 15wt% of OM is considered as optimized membrane and it was applied for the second stage of this work. This stage concerns the treatment of wastewater from a thermal complex located 12 km south of the city of Meknes, Morocco, through a treatment by a biological disk microstation. The filtrate obtained then undergoes tangential filtration by the membranes elaborated and optimized following the evolution of the pollution parameters. Based on physicochemical and biological analyses of wastewater after treatment by the coupled system, the membranes obtained have a good permeability and an excellent pollution removal performance.

Preparation of Sodalite and Faujasite Clay Composite Membranes and Their Utilization in the Decontamination of Dye Effluents.

The present work describes the deposition of two zeolite films, sodalite and faujasite, by the hydrothermal method to tune the mesopores of clay support, which are prepared from a widely available clay depot from the central region of Morocco (Midelt). The clay supports were prepared by a powder metallurgy method from different granulometries with activated carbon as a porosity agent, using uniaxial compression followed by a sintering process. The 160 µm ≤ Φ ≤ 250 µm support showed the highest water flux compared to the supports made from smaller granulometries with a minimum water flux of 1405 L.m-2·h-1 after a working time of 2 h and 90 min. This support was chosen for the deposition of sodalite (SOM) and faujasite (FAM) zeolite membranes. The X-ray diffraction of sodalite and faujasite showed that they were well crystallized, and the obtained spectra corresponded well with the sought phases. Such findings were confirmed by the SEM analysis, which showed that SOM was crystalized as fine particles while the FAM micrographs showed the existence of crystals with an average size ranging from 0.53 µm to 1.8 µm with a bipyramidal shape and a square or Cubo octahedral base. Nitrogen adsorption analysis showed that the pore sizes of the supports got narrowed to 2.28 nm after deposition of sodalite and faujasite. The efficiencies of SOM and FAM membranes were evaluated by filtration tests of solutions containing methyl orange (MO) using a flow loop, which were developed for dead-end filtration. The retention of methylene orange (MO) followed the order: SOM > FAM > 160 µm ≤ Φ ≤ 250 µm clay support with 55%, 48% and 35%, respectively. Size exclusion was the predominant mechanism of filtration of MO through SOM, FAM, and the support. However, the charge repulsion between the surface of the membrane and the negatively charged MO have not been ruled out. The point of zero charge (pzc) of the clay support, SOM and FAM membrane were pHpzc = 9.4, pHpzc = 10.6, and pHpzc = 11.4, respectively. Filtrations of MO were carried out between pH = 5.5 and pH = 6.5, which indicated that the surface of the membranes was positively charged while MO was negatively charged. The interaction of MO with the membranes might have happened through its vertical geometry.

Dataset of multiple methodology characterization of an illite-kaolinite clay mineral for the purpose of using it as ceramic membrane supports.

This article describes the data generated from multiple approach methodology physico-chemical characterization of a clay mineral from the West-Central region of Morocco, Safi province (https://doi.org/10.1016/j.heliyon.2019.e02281) [1]. Data were generated from classical chemical analytical techniques namely; organic matter content, linear firing and shrinkage analysis, weight loss on ignition, porosity and methylene blue stain tests according to the French Association of Normalization (AFNOR) and American Society for Testing and Materials (ASTM). In addition to data generated using instrumental analytical techniques namely; Infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and deferential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and elemental energy disperse spectroscopy (EDX).

Erratum to "Characterization of the firing behaviour of an illite-kaolinite clay mineral and its potential use as membrane support" [Heliyon 5, (8), (August 2019), e02281].

[This corrects the article DOI: 10.1016/j.heliyon.2019.e02281.].

Characterization of the firing behaviour of an illite-kaolinite clay mineral and its potential use as membrane support.

The commercial value of any clay depends on its physical and chemical properties, these could help in tuning the characteristics of ceramic membrane supports required at extreme filtration conditions. The characteristics of two clay minerals named SA and CH were studied at various firing temperatures. The composition in oxides of both raw materials consisted of quartz (44.40 ± 0.60 to 46.98 ± 0.57 m%), alumina (13.16 ± 0.56 to 19.64 ± 0.48 m%), iron oxide (4.85 ± 0.46 to 6.37 ± 0.70 m %), and relatively smaller amounts of alkaline-earth oxides (3.34 ± 0.43 to 5.98 ± 0.33 m% calcium oxide and 1.98 ± 0.18 to 5.87 ± 0.34 m% for magnesium oxide). XRD of the investigated samples indicated the presence of kaolinite and illite as pure clay fractions in the clay mineral. SEM showed that the clay minerals were constituted from fine poorly crystalline particles with particles' size more than 5 µm. The specific surface areas of the clay minerals were found to vary between 94.5 ± 6.3 to 138.6 ± 4.2 m2/g using methylene blue stain test, indicating that, the clay minerals fall within chlorite, illite, and kaolinite categories. The porosity of the clay supports made from both clays were found to be maximal with values of 23.45% ± 0.66 and 21.61% ± 0.60 for SA and CH clay materials respectively at 700°C. These values were a direct result of capillary movements of water in the specimen pores that were opened to the outside leading to the highest number macropores and mesopores in the specimen.

Dataset in the production of composite clay-zeolite membranes made from naturally occurring clay minerals.

The data presented in this article are generated as part of the research article entitled "from a naturally occurring material (clay mineral) to the production of porous ceramic membranes" (Elgamouz and Tijani, 2018) [1]. This article describe how clays as very abundant versatile materials that have many properties not available in pure materials namely, silica, alumina and zirconia can be used for the preparation of ceramic membranes (Karaborni et al., 1996; Oun et al., 2017; Hollanders et al., 2016; de Oliveira Henriques et al., 2017) [2], [3], [4], [5]. This paper presents data obtained at different stages of the fabrication of a clay-zeolite composite ceramic membrane made from a largely available clay from the central region of Morocco (Meknes). The data include the characterization of the clay powder using XRD, FTIR, thermogravimetric (TGA and TDA) analysis of the clay powder. The data of porosity, mesoporosity, specific surface area, volumes of the pores, volumes of mesopores, diameters of the pores using mercury intrusion porosimetry and adsorption desorption of nitrogen data that was computed from BET and BJH theories of the clay supports at different firing temperatures (700, 750, 800, 850 and 900 °C). Data obtained from measurement of nitrogen permeation of support alone and that of the silicalite membranes are also represented.