Attosecond and nano-Coulomb electron bunches via the Zero Vector Potential mechanism.

The commissioning of multi-petawatt class laser facilities around the world is gathering pace. One of the primary motivations for these investments is the acceleration of high-quality, low-emittance electron bunches. Here we explore the interaction of a high-intensity femtosecond laser pulse with a mass-limited dense target to produce MeV attosecond electron bunches in transmission and confirm with three-dimensional simulation that such bunches have low emittance and nano-Coulomb charge. We then perform a large parameter scan from non-relativistic laser intensities to the laser-QED regime and from the critical plasma density to beyond solid density to demonstrate that the electron bunch energies and the laser pulse energy absorption into the plasma can be quantitatively described via the Zero Vector Potential mechanism. These results have wide-ranging implications for future particle accelerator science and associated technologies.

Observation of Monoenergetic Electrons from Two-Pulse Ionization Injection in Quasilinear Laser Wakefields.

The generation of low emittance electron beams from laser-driven wakefields is crucial for the development of compact x-ray sources. Here, we show new results for the injection and acceleration of quasimonoenergetic electron beams in low amplitude wakefields experimentally and using simulations. This is achieved by using two laser pulses decoupling the wakefield generation from the electron trapping via ionization injection. The injection duration, which affects the beam charge and energy spread, is found to be tunable by adjusting the relative pulse delay. By changing the polarization of the injector pulse, reducing the ionization volume, the electron spectra of the accelerated electron bunches are improved.

Ionization states for the multipetawatt laser-QED regime.

A paradigm shift in the physics of laser-plasma interactions is approaching with the commissioning of multipetawatt laser facilities worldwide. Radiation reaction processes will result in the onset of electron-positron pair cascades and, with that, the absorption and partitioning of the incident laser energy, as well as the energy transport throughout the irradiated targets. To accurately quantify these effects, one must know the focused intensity on target in situ. In this work, a way of measuring the focused intensity on target is proposed based upon the ionization of xenon gas at low ambient pressure. The field ionization rates from two works [Phys. Rev. A 59, 569 (1999)1050-294710.1103/PhysRevA.59.569 and Phys. Rev. A 98, 043407 (2018)2469-992610.1103/PhysRevA.98.043407], where the latter rate has been derived using quantum mechanics, have been implemented in the particle-in-cell code SMILEI [Comput. Phys. Commun. 222, 351 (2018)0010-465510.1016/j.cpc.2017.09.024]. A series of one- and two-dimensional simulations are compared and shown to reproduce the charge states without presenting visible differences when increasing the simulation dimensionality. They provide a way to accurately verify the intensity on target using in situ measurements.

Suprathermal electrons from the anti-Stokes Langmuir decay instability cascade.

The study of parametric instabilities has played a crucial role in understanding energy transfer to plasma and, with that, the development of key applications such as inertial confinement fusion. When the densities are between 0.11n_{c}≲n_{e}≲0.14n_{c} and the electron temperature is in inertial confinement fusion-relevant temperatures, anomalous hot electrons with kinetic energies above 100keV are generated. Here a new electron acceleration mechanism-the anti-Stokes Langmuir decay instability cascade of forward stimulated Raman scattering-is investigated. This mechanism potentially explains anomalous energetic electron generation in indirectly driven inertial confinement fusion experiments, it also provides a new way of accelerating electrons to higher energy for applications such as novel x-ray sources.

Methods for extremely sparse-angle proton tomography.

Proton radiography is a widely fielded diagnostic used to measure magnetic structures in plasma. The deflection of protons with multi-MeV kinetic energy by the magnetic fields is used to infer their path-integrated field strength. Here the use of tomographic methods is proposed for the first time to lift the degeneracy inherent in these path-integrated measurements, allowing full reconstruction of spatially resolved magnetic field structures in three dimensions. Two techniques are proposed which improve the performance of tomographic reconstruction algorithms in cases with severely limited numbers of available probe beams, as is the case in laser-plasma interaction experiments where the probes are created by short, high-power laser pulse irradiation of secondary foil targets. A new configuration allowing production of more proton beams from a single short laser pulse is also presented and proposed for use in tandem with these analytical advancements.

Field-testing a new directional passive air sampler for fugitive dust in a complex industrial source environment.

Quantifying the sources of fugitive dusts on complex industrial sites is essential for regulation and effective dust management. This study applied two recently-patented Directional Passive Air Samplers (DPAS) to measure the fugitive dust contribution from a Metal Recovery Plant (MRP) located on the periphery of a major steelworks site. The DPAS can collect separate samples for winds from different directions (12 × 30° sectors), and the collected dust may be quantified using several different measurement methods. The DPASs were located up and down-prevailing-wind of the MRP processing area to (i) identify and measure the contribution made by the MRP processing operation; (ii) monitor this contribution during the processing of a particularly dusty material; and (iii) detect any changes to this contribution following new dust-control measures. Sampling took place over a 12-month period and the amount of dust was quantified using photographic, magnetic and mass-loading measurement methods. The DPASs are able to effectively resolve the incoming dust signal from the wider steelworks complex, and also different sources of fugitive dust from the MRP processing area. There was no confirmable increase in the dust contribution from the MRP during the processing of a particularly dusty material, but dust levels significantly reduced following the introduction of new dust-control measures. This research was undertaken in a regulatory context, and the results provide a unique evidence-base for current and future operational or regulatory decisions.

Improved Norway spruce somatic embryo development through the use of abscisic acid combined with activated carbon.

The combination of abscisic acid (ABA) and activated carbon increased Norway spruce (Picea abies L., Karst.) cotyledonary somatic embryo yields, increased the number of genotypes forming cotyledonary embryos, caused embryos to form that exhibited improved maturation characteristics, and reduced embryo production costs. Somatic embryos increased in size, showed larger apical regions, became more zygotic-like in shape, and showed higher percentages of epicotyl development upon germination. Analyses of medium for free ABA in the presence of activated charcoal showed a rapid decrease within a few hours followed by a gradual decline over the next few days with little change from 2 to 6 weeks. Gelling agents strongly affected ABA adsorption, with agar decreasing the adsorption of ABA compared to gellan gum (Gelrite, Phytagel). Over 4,000 somatic seedlings from 20 clones were produced and established in a greenhouse using the methods discussed, and approximately 1,250 seedlings representing seven clones were established in a field setting.

Maturation in Douglas-fir: II. Maturation characteristics of genetically matched Douglas-fir seedlings, rooted cuttings and tissue culture plantlets during and after 5 years of field growth.

Seedlings, rooted cuttings from juvenile stock plants, and cotyledon-derived tissue culture plantlets were propagated from several coastal Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) full-sib families so that the rooted cuttings and plantlets were clonally identical. The stock types (seedlings, rooted cuttings and plantlets) were planted in the field in spring 1987. In fall 1991, after five complete growing seasons, the plants were measured and these values compared to maturation "markers" identified for Douglas-fir in the companion paper (Ritchie and Keeley 1994). Nodal branch lengths and nodal branch diameters decreased in the order seedlings > rooted cuttings > plantlets. The decreases were about 21% for nodal branch lengths and 24% for nodal branch diameters. Seedlings carried significantly more total branches (nodal + internodal) than the other two stock types. Height growth was similar for the three stock types, but plantlet height increment was beginning to decrease during the fourth year. We conclude that vegetative propagules of Douglas-fir exhibited traits of mature trees. These were particularly marked in the cotyledon-derived plantlets.

Biotechnology of forest yield.

Silvicultural and genetic manipulation of Douglas fir and loblolly pine plantations have increased their productivity 70 and 300 percent, respectively, over natural forests on the same sites. Yet these intensively managed plantations are achieving less than 50 percent of their potential productivity. Future increases in yield will result from optimization of nutritional treatments, control of noncrop vegetation, and advances in tree breeding and tissue culture techniques.