Organic-inorganic hybrid material for hole transport in inverted perovskite solar cells.

Hole mobility is critical to the power conversion efficiencies of perovskite solar cells (PSCs). Organic small-molecule hole-transporting materials (HTMs) have attracted considerable interest in PSCs due to their structural flexibility and operational durability, but they suffer from modest hole mobility. On the other hand, inorganic HTMs with good hole mobility are inflexible in structural variation and exhibit unsatisfactory cell efficiency. In this study, a ligand BT28 and its zinc-based coordination complex BTZ30 were synthesized, characterized, and investigated as HTMs for PSC applications. The mixed-halide perovskites can be grown uniformly with large crystalline grains on both HTMs, which exhibit similar optical and electrochemical properties. However, it was discovered that the BTZ30-based solar cell exhibited an open-circuit voltage of 1.0817 V and a high short-circuit current density of 23.1392 mA cm-2 with a champion power conversion efficiency of close to 20 %. The performance difference between the two HTMs can be attributed to the difference in their hole mobilities, which is 63.31 % higher for BTZ30 than BT28. The comparison of non-metal and metal HTMs revealed the importance of considering hybrid structures to overcome some shortcomings associated with organic and inorganic HTMs and achieve high-performance PSCs.

Heterocyclic Functionalized Donor-Acceptor Hole-Transporting Materials for Inverted Perovskite Solar Cells.

Hole transport materials (HTMs) with appropriate energy levels and comprehensive passivation effects help to obtain highly efficient and stable perovskite solar cells (PSCs). Electron-deficient character-induced HTMs can generate varying energy level alignments near the HTM/perovskite interface. Herein, we report the synthesis and investigation of two new dipolar HTMs, WWC103 and WWC105, based on 2-(1,1-dicyanomethylene)rhodamine and 4-cynophenylacetonitrile acceptors, enabling high-efficiency mixed-cation mixed-halide perovskite solar cells. Apart from having different acceptors, these HTMs are built on a heterocyclic frame, which can provide passivation effects and improve the morphology of the perovskite layer. As a result, these dopant-free HTM-based solar cells show a high open-circuit voltage and good power conversion efficiency. Among both, the solar cell based on the HTM with 2-(1,1-dicyanomethylene)rhodamine exhibits a high open-circuit voltage of 1.09 V with a champion power conversion efficiency of over 20.51%. The improved performance of WWC103 over WWC105 (19.74%) is attributed to the new acceptor, which, in addition to providing good energy-level alignments and hole mobility, also holds the ability to passivate the defects. The findings suggest a new acceptor unit for constructing dopant-free HTMs for efficient PSCs.

New Oxindole-Bridged Acceptors for Organic Sensitizers: Substitution and Performance Studies in Dye-Sensitized Solar Cells.

New D-π-A configured organic sensitizers featuring halogen-substituted oxindole-bridged acceptor units have been synthesized for dye-sensitized solar cells applications. Among fluorine, bromine, and iodine substitution, the cell based on bromine incorporated dye exhibited the highest efficiency. The oxindoles in these sensitizers were found to assist the electron injection through the chelation of their amide carbonyl groups to the TiO2 surface. This study provides an alternate approach for future rational dye design to gain excellent DSSC performance.

The effect of cis-trans configurational difference on the performance of pyridylimine-based ruthenium sensitizers.

New heteroleptic Ru(ii) complexes consisting of pyridylimine as an ancillary ligand were synthesized and characterized for applications in dye sensitized solar cells. Complexes with cis and trans configurations around the central ruthenium metal were obtained using simple synthetic protocols by varying the substituents on the pyridylimine ligands. The geometries of these complexes were confirmed by single crystal X-ray analysis. The effect of the difference in the configurations of these complexes on their device performances was studied and the sensitizer with a trans arrangement around the metal showed a higher overall conversion efficiency (η) of 7.27% than that of the cis configured complex (η = 2.04%).

Novel oxindole based sensitizers: synthesis and application in dye-sensitized solar cells.

Two novel oxindole sensitizers have been synthesized for dye-sensitized solar cell applications. These new dyes can provide an additional pathway to inject electrons into the photoanode through the partial chelation of their amide carbonyl groups to the TiO2 surface. Incorporation of an electron deficient pyridine in the acceptor of the TI125 dye was found to enhance the photovoltage and conversion efficiency of the cell.

A highly conjugated benzimidazole carbene-based ruthenium sensitizer for dye-sensitized solar cells.

A new type of carbene-based ruthenium sensitizer, CB104, with a highly conjugated ancillary ligand, diphenylvinylthiophene-substituted benzimidazolepyridine, was designed and developed for dye-sensitized solar cell applications. The influence of the thiophene antenna on the performance of the cell anchored with CB104 was investigated. Compared with the dye CBTR, the conjugated thiophene in the ancillary ligand of CB104 enhanced the molar extinction coefficient of the intraligand π-π* transition and the intensity of the lower energy metal-to-ligand charge-transfer band. However, the incident photon-to-current conversion efficiency spectrum of the cell anchored with CB104 (0.15 mM) showed a maximum of 63 % at 420 nm. The cell sensitized with the dye CB104 attained a power conversion efficiency of 7.30 %, which was lower than that of the cell with nonconjugated sensitizer CBTR (8.92 %) under the same fabrication conditions. The variation in the performance of these two dyes demonstrated that elongating the conjugated light-harvesting antenna resulted in the reduction of short-circuit photocurrent density, which might have been due to the aggregation of dye molecules. In the presence of a coabsorbate, chenodeoxycholic acid, the CB104-sensitized cell exhibited an enhanced photocurrent density and achieved a photovoltaic efficiency of 8.36 %.

Carbene-based ruthenium photosensitizers.

A new series of N-heterocyclic carbene (NHC)-pyridine ruthenium complexes incorporating a carbene unit as an ancillary ligand were designed and successfully synthesized by using simple synthetic methods. The photophysical, electrochemical and photovoltaic properties of these NHC-pyridine based ruthenium complexes were investigated. These complexes showed photoelectric conversion efficiencies in the range of 6.43 ∼ 7.24% under the illumination of AM 1.5 (100 mW cm(-2)). Interestingly, the modifications on the ancillary ligand of these sensitizers by removal of an alkoxyl group and replacement of the octyl chain with a 3,5-difluorobenzyl group showed a 13% increase in the conversion efficiency for the CifPR dye. These results demonstrated that structural modifications on the NHC-pyridine ancillary ligand of ruthenium complexes results in dye-sensitized solar cells exhibiting a comparable cell performance to that obtained using the standard N719 dye.