All-Perovskite Multicomponent Nanocrystal Superlattices.

Nanocrystal superlattices (NC SLs) have long been sought as promising metamaterials, with nanoscale-engineered properties arising from collective and synergistic effects among the constituent building blocks. Lead halide perovskite (LHP) NCs come across as outstanding candidates for SL design, as they demonstrate collective light emission, known as superfluorescence, in single- and multicomponent SLs. Thus far, LHP NCs have only been assembled in single-component SLs or coassembled with dielectric NC building blocks acting solely as spacers between luminescent NCs. Here, we report the formation of multicomponent LHP NC-only SLs, i.e., using only CsPbBr3 NCs of different sizes as building blocks. The structural diversity of the obtained SLs encompasses the ABO6, ABO3, and NaCl structure types, all of which contain orientationally and positionally locked NCs. For the selected model system, the ABO6-type SL, we observed efficient NC coupling and Förster-like energy transfer from strongly confined 5.3 nm CsPbBr3 NCs to weakly confined 17.6 nm CsPbBr3 NCs, along with characteristic superfluorescence features at cryogenic temperatures. Spatiotemporal exciton dynamics measurements reveal that binary SLs exhibit enhanced exciton diffusivity compared to single-component NC assemblies across the entire temperature range (from 5 to 298 K). The observed coherent and incoherent NC coupling and controllable excitonic transport within the solid NC SLs hold promise for applications in quantum optoelectronic devices.

Persistent enhancement of exciton diffusivity in CsPbBr3 nanocrystal solids.

In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occupied by a previous exciton. Using transient photoluminescence microscopy, we observe a striking dependence of the apparent exciton diffusivity on excitation laser power that does not arise from nonlinear exciton-exciton interactions or thermal heating. We interpret our observations with a model in which excitons cause NCs to transition to a long-lived metastable configuration that markedly increases exciton transport. The exciton diffusivity observed here (>0.15 square centimeters per second) is considerably higher than that observed in other NC systems, revealing unusually strong excitonic coupling between NCs. The finding of a persistent enhancement in excitonic coupling may help explain other photophysical behaviors observed in CsPbBr3 NCs, such as superfluorescence, and inform the design of optoelectronic devices.

Bright Excitonic Fine Structure in Metal-Halide Perovskites: From Two-Dimensional to Bulk.

The optical response of two-dimensional (2D) perovskites, often referred to as natural quantum wells, is primarily governed by excitons, whose properties can be readily tuned by adjusting the perovskite layer thickness. We have investigated the exciton fine structure splitting in the archetypal 2D perovskite (PEA)2(MA)n-1PbnI3n+1 with varying numbers of inorganic octahedral layers n = 1, 2, 3, and 4. We demonstrate that the in-plane excitonic states exhibit splitting and orthogonally oriented dipoles for all confinement regimes. The evolution of the exciton states in an external magnetic field provides further insights into the g-factors and diamagnetic coefficients. With increasing n, we observe a gradual evolution of the excitonic parameters characteristic of a 2D to three-dimensional transition. Our results provide valuable information concerning the evolution of the optoelectronic properties of 2D perovskites with the changing confinement strength.

Discovery of enhanced lattice dynamics in a single-layered hybrid perovskite.

Layered hybrid perovskites exhibit emergent physical properties and exceptional functional performances, but the coexistence of lattice order and structural disorder severely hinders our understanding of these materials. One unsolved problem regards how the lattice dynamics are affected by the dimensional engineering of the inorganic frameworks and their interaction with the molecular moieties. Here, we address this question by using a combination of spontaneous Raman scattering, terahertz spectroscopy, and molecular dynamics simulations. This approach reveals the structural dynamics in and out of equilibrium and provides unexpected observables that differentiate single- and double-layered perovskites. While no distinct vibrational coherence is observed in double-layered perovskites, an off-resonant terahertz pulse can drive a long-lived coherent phonon mode in the single-layered system. This difference highlights the dramatic change in the lattice environment as the dimension is reduced, and the findings pave the way for ultrafast structural engineering and high-speed optical modulators based on layered perovskites.

Dipole-Dependent Waveguiding in an Anisotropic Metal-Organic Framework.

The interaction between excitons and photons underlies a range of emergent technologies, such as directional light emission, molecular lasers, photonic circuits, and polaritonic devices. Two of the key parameters that impact exciton-photon coupling are the binding energy of excitons and the relative orientations between the exciton dipole and photon field. Tightly bound excitons are typically found in molecular crystals, where nevertheless the angular relationship of excitons with photon fields is difficult to control. Here, we demonstrate directional exciton dipoles and photon fields, anchored by metal-ligand coordination. In a pyrene-porphyrin bichromophoric metal-organic framework (MOF), we observe that the perpendicular arrangement of the pyrene- and porphyrin-based exciton dipoles engenders orthogonal polarizations of their respective emissions. The alignment of the directional exciton and photon fields gives rise to an anisotropic waveguide effect, where the pyrene- and the porphyrin-based emissions show distinct spatial distribution within microplate-shaped MOF crystals. This capability to simultaneously host heterogenous excitonic states and anisotropic photon fields points toward MOFs' yet-to-be-realized potential as a platform for advancing the frontier in the field of exciton-photonics, which centers around engineering emergent properties from the interplay between excitons and photons.

Fine Structure Splitting of Phonon-Assisted Excitonic Transition in (PEA)2PbI4 Two-Dimensional Perovskites.

Two-dimensional van der Waals materials exhibit particularly strong excitonic effects, which causes them to be an exceptionally interesting platform for the investigation of exciton physics. A notable example is the two-dimensional Ruddlesden-Popper perovskites, where quantum and dielectric confinement together with soft, polar, and low symmetry lattice create a unique background for electron and hole interaction. Here, with the use of polarization-resolved optical spectroscopy, we have demonstrated that the simultaneous presence of tightly bound excitons, together with strong exciton-phonon coupling, allows for observing the exciton fine structure splitting of the phonon-assisted transitions of two-dimensional perovskite (PEA)2PbI4, where PEA stands for phenylethylammonium. We demonstrate that the phonon-assisted sidebands characteristic for (PEA)2PbI4 are split and linearly polarized, mimicking the characteristics of the corresponding zero-phonon lines. Interestingly, the splitting of differently polarized phonon-assisted transitions can be different from that of the zero-phonon lines. We attribute this effect to the selective coupling of linearly polarized exciton states to non-degenerate phonon modes of different symmetries resulting from the low symmetry of (PEA)2PbI4 lattice.

Giant Nonlinear Optical Response via Coherent Stacking of In-Plane Ferroelectric Layers.

Thin ferroelectric materials hold great promise for compact nonvolatile memory and nonlinear optical and optoelectronic devices. Herein, an ultrathin in-plane ferroelectric material that exhibits a giant nonlinear optical effect, group-IV monochalcogenide SnSe, is reported. Nanometer-scale ferroelectric domains with ≈90°/270° twin boundaries or ≈180° domain walls are revealed in physical-vapor-deposited SnSe by lateral piezoresponse force microscopy. Atomic structure characterization reveals both parallel and antiparallel stacking of neighboring van der Waals ferroelectric layers, leading to ferroelectric or antiferroelectric ordering. Ferroelectric domains exhibit giant nonlinear optical activity due to coherent enhancement of second-harmonic fields and the as-resulted second-harmonic generation was observed to be 100 times more intense than monolayer WS2 . This work demonstrates in-plane ferroelectric ordering and giant nonlinear optical activity in SnSe, which paves the way for applications in on-chip nonlinear optical components and nonvolatile memory devices.

1D Hybrid Semiconductor Silver 2,6-Difluorophenylselenolate.

Organic-inorganic hybrid materials present new opportunities for creating low-dimensional structures with unique light-matter interaction. In this work, we report a chemically robust yellow emissive one-dimensional (1D) semiconductor, silver 2,6-difluorophenylselenolate─AgSePhF2(2,6), a new member of the broader class of hybrid low-dimensional semiconductors, metal-organic chalcogenolates. While silver phenylselenolate (AgSePh) crystallizes as a two-dimensional (2D) van der Waals semiconductor, introduction of fluorine atoms at the (2,6) position of the phenyl ring induces a structural transition from 2D sheets to 1D chains. Density functional theory calculations reveal that AgSePhF2 (2,6) has strongly dispersive conduction and valence bands along the 1D crystal axis. Visible photoluminescence centered around λp ≈ 570 nm at room temperature exhibits both prompt (110 ps) and delayed (36 ns) components. The absorption spectrum exhibits excitonic resonances characteristic of low-dimensional hybrid semiconductors, with an exciton binding energy of approximately 170 meV as determined by temperature-dependent photoluminescence. The discovery of an emissive 1D silver organoselenolate highlights the structural and compositional richness of the chalcogenolate material family and provides new insights for molecular engineering of low-dimensional hybrid organic-inorganic semiconductors.

Lead Halide Perovskite Nanocrystals with Low Inhomogeneous Broadening and High Coherent Fraction through Dicationic Ligand Engineering.

Lead halide perovskite nanocrystals (LHP NCs) are an emerging materials system with broad potential applications, including as emitters of quantum light. We apply design principles aimed at the structural optimization of surface ligand species for CsPbBr3 NCs, leading us to the study of LHP NCs with dicationic quaternary ammonium bromide ligands. Through the selection of linking groups and aliphatic backbones guided by experiments and computational support, we demonstrate consistently narrow photoluminescence line shapes with a full-width-at-half-maximum below 70 meV. We observe bulk-like Stokes shifts throughout our range of particle sizes, from 7 to 16 nm. At cryogenic temperatures, we find sub-200 ps lifetimes, significant photon coherence, and the fraction of photons emitted into the coherent channel increasing markedly to 86%. A 4-fold reduction in inhomogeneous broadening from previous work paves the way for the integration of LHP NC emitters into nanophotonic architectures to enable advanced quantum optical investigation.

Nanocrystal phononics.

Colloidal nanocrystals are successfully used as nanoscale building blocks for creating hierarchical solids with structures that range from amorphous networks to sophisticated periodic superlattices. Recently, it has been observed that these superlattices exhibit collective vibrations, which stem from the correlated motion of the nanocrystals, with their surface-bound ligands acting as molecular linkers. In this Perspective, we describe the work so far on collective vibrations in nanocrystal solids and their as-of-yet untapped potential for phononic applications. With the ability to engineer vibrations in the hypersonic regime through the choice of nanocrystal and linker composition, as well as by controlling their size, shape and chemical interactions, such superstructures offer new opportunities for phononic crystals, acoustic metamaterials and optomechanical systems.

Dipole-mediated exciton management strategy enabled by reticular chemistry.

Selectively blocking undesirable exciton transfer pathways is crucial for utilizing exciton conversion processes that involve participation of multiple chromophores. This is particularly challenging for solid-state systems, where the chromophores are fixed in close proximity. For instance, the low efficiency of solid-state triplet-triplet upconversion calls for inhibiting the parasitic singlet back-transfer without blocking the flow of triplet excitons. Here, we present a reticular chemistry strategy that inhibits the resonance energy transfer of singlet excitons. Within a pillared layer metal-organic framework (MOF), pyrene-based singlet donors are situated perpendicular to porphyrin-based acceptors. High resolution transmission electron microscopy and electron diffraction enable direct visualization of the structural relationship between donor and acceptor (D-A) chromophores within the MOF. Time-resolved photoluminescence measurements reveal that the structural and symmetry features of the MOF reduce the donor-to-acceptor singlet transfer efficiency to less than 36% compared to around 96% in the control sample, where the relative orientation of the donor and acceptor chromophores cannot be controlled.

Light Emission in 2D Silver Phenylchalcogenolates.

Silver phenylselenolate (AgSePh, also known as "mithrene") and silver phenyltellurolate (AgTePh, also known as "tethrene") are two-dimensional (2D) van der Waals semiconductors belonging to an emerging class of hybrid organic-inorganic materials called metal-organic chalcogenolates. Despite having the same crystal structure, AgSePh and AgTePh exhibit a strikingly different excitonic behavior. Whereas AgSePh exhibits narrow, fast luminescence with a minimal Stokes shift, AgTePh exhibits comparatively slow luminescence that is significantly broadened and red-shifted from its absorption minimum. Using time-resolved and temperature-dependent absorption and emission microspectroscopy, combined with subgap photoexcitation studies, we show that exciton dynamics in AgTePh films are dominated by an intrinsic self-trapping behavior, whereas dynamics in AgSePh films are dominated by the interaction of band-edge excitons with a finite number of extrinsic defect/trap states. Density functional theory calculations reveal that AgSePh has simple parabolic band edges with a direct gap at Γ, whereas AgTePh has a saddle point at Γ with a horizontal splitting along the Γ-N1 direction. The correlation between the unique band structure of AgTePh and exciton self-trapping behavior is unclear, prompting further exploration of excitonic phenomena in this emerging class of hybrid 2D semiconductors.

Robust estimation of charge carrier diffusivity using transient photoluminescence microscopy.

Transient microscopy has emerged as a powerful tool for imaging the diffusion of excitons and free charge carriers in optoelectronic materials. In many excitonic materials, extraction of diffusion coefficients can be simplified because of the linear relationship between signal intensity and local excited state population. However, in materials where transport is dominated by free charge carriers, extracting diffusivities accurately from multidimensional data is complicated by the nonlinear dependence of the measured signal on the local charge carrier density. To obtain accurate estimates of charge carrier diffusivity from transient microscopy data, statistically robust fitting algorithms coupled to efficient 3D numerical solvers that faithfully relate local carrier dynamics to raw experimental measurables are sometimes needed. Here, we provide a detailed numerical framework for modeling the spatiotemporal dynamics of free charge carriers in bulk semiconductors with significant solving speed reduction and for simulating the corresponding transient photoluminescence microscopy data. To demonstrate the utility of this approach, we apply a fitting algorithm using a Markov chain Monte Carlo sampler to experimental data on bulk CdS and methylammonium lead bromide (MAPbBr3) crystals. Parameter analyses reveal that transient photoluminescence microscopy can be used to obtain robust estimates of charge carrier diffusivities in optoelectronic materials of interest, but that other experimental approaches should be used for obtaining carrier recombination constants. Additionally, simplifications can be made to the fitting model depending on the experimental conditions and material systems studied. Our open-source simulation code and fitting algorithm are made freely available to the scientific community.

Uniaxial Strain Engineering via Core Position Control in CdSe/CdS Core/Shell Nanorods and Their Optical Response.

Anisotropic strain engineering has emerged as a powerful strategy for enhancing the optoelectronic performance of semiconductor nanocrystals. Here, we show that CdSe/CdS dot-in-rod structures offer a platform for fine-tuning the optical response of CdSe quantum dots through anisotropic strain. By controlling the spatial position of the CdSe core within a growing CdS nanorod shell, varying degrees of uniaxial strain can be introduced. Placing CdSe cores at the end of the CdS nanorod induces strong asymmetric compression along the c-axis of the wurtzite CdSe core, dramatically altering its absorption and emission characteristics, whereas CdSe cores located near the middle of the nanorod experience a comparatively weak uniaxial strain field. The change in absorption and emission spectra and dynamics for highly strained end-position CdSe/CdS nanorods is explained by (1) relative shifting of the valence band light hole and heavy hole levels and (2) introduction of a strong piezoelectric potential, which spatially separates the electron and hole wave functions. The ability to tune the degree of uniaxial strain through core position control in a nanorod structure creates opportunities for precisely modulating the electronic properties of CdSe nanocrystals while simultaneously taking advantage of dielectric and optical anisotropies intrinsic to 1D nanostructures.

Quantification of Exciton Fine Structure Splitting in a Two-Dimensional Perovskite Compound.

Applications of two-dimensional (2D) perovskites have significantly outpaced the understanding of many fundamental aspects of their photophysics. The optical response of 2D lead halide perovskites is dominated by strongly bound excitonic states. However, a comprehensive experimental verification of the exciton fine structure splitting and associated transition symmetries remains elusive. Here we employ low temperature magneto-optical spectroscopy to reveal the exciton fine structure of (PEA)2PbI4 (here PEA is phenylethylammonium) single crystals. We observe two orthogonally polarized bright in-plane free exciton (FX) states, both accompanied by a manifold of phonon-dressed states that preserve the polarization of the corresponding FX state. Introducing a magnetic field perpendicular to the 2D plane, we resolve the lowest energy dark exciton state, which although theoretically predicted, has systematically escaped experimental observation (in Faraday configuration) until now. These results corroborate standard multiband, effective-mass theories for the exciton fine structure in 2D perovskites and provide valuable quantification of the fine structure splitting in (PEA)2PbI4.

Morphological Control of 2D Hybrid Organic-Inorganic Semiconductor AgSePh.

Silver phenylselenolate (AgSePh) is a hybrid organic-inorganic two-dimensional (2D) semiconductor exhibiting narrow blue emission, in-plane anisotropy, and large exciton binding energy. Here, we show that the addition of carefully chosen solvent vapors during the chemical transformation of metallic silver to AgSePh allows for control over the size and orientation of AgSePh crystals. By testing 28 solvent vapors (with different polarities, boiling points, and functional groups), we controlled the resulting crystal size from <200 nm up to a few µm. Furthermore, choice of solvent vapor can substantially improve the orientational homogeneity of 2D crystals with respect to the substrate. In particular, solvents known to form complexes with silver ions, such as dimethyl sulfoxide (DMSO), led to the largest lateral crystal dimensions and parallel crystal orientation. We perform systematic optical and electrical characterizations on DMSO vapor-grown AgSePh films demonstrating improved crystalline quality, lower defect densities, higher photoconductivity, lower dark conductivity, suppression of ionic migration, and reduced midgap photoluminescence at low temperature. Overall, this work provides a strategy for realizing AgSePh films with improved optical properties and reveals the roles of solvent vapors on the chemical transformation of metallic silver.

Size and Quality Enhancement of 2D Semiconducting Metal-Organic Chalcogenolates by Amine Addition.

The use of two-dimensional (2D) materials in next-generation technologies is often limited by small lateral size and/or crystal defects. Here, we introduce a simple chemical strategy to improve the size and overall quality of 2D metal-organic chalcogenolates (MOCs), a new class of hybrid organic-inorganic 2D semiconductors that can exhibit in-plane anisotropy and blue luminescence. By inducing the formation of silver-amine complexes during a solution growth method, we increase the average size of silver phenylselenolate (AgSePh) microcrystals from <5 µm to >1 mm, while simultaneously extending the photoluminescence lifetime and suppressing mid-gap emission. Mechanistic studies using 77Se NMR suggest dual roles for the amine in promoting the formation of a key reactive intermediate and slowing down the final conversion to AgSePh. Finally, we show that amine addition is generalizable to the synthesis of other 2D MOCs, as demonstrated by the growth of single crystals of silver 4-methylphenylselenolate (AgSePhMe), a novel member of the 2D MOC family.

Power-Dependent Photoluminescence Efficiency in Manganese-Doped 2D Hybrid Perovskite Nanoplatelets.

Substitutional metal doping is a powerful strategy for manipulating the emission spectra and excited state dynamics of semiconductor nanomaterials. Here, we demonstrate the synthesis of colloidal manganese (Mn2+)-doped organic-inorganic hybrid perovskite nanoplatelets (chemical formula: L2[APb1-xMnxBr3]n-1Pb1-xMnxBr4; L, butylammonium; A, methylammonium or formamidinium; n (= 1 or 2), number of Pb1-xMnxBr64- octahedral layers in thickness) via a ligand-assisted reprecipitation method. Substitutional doping of manganese for lead introduces bright (approaching 100% efficiency) and long-lived (>500 µs) midgap Mn2+ atomic states, and the doped nanoplatelets exhibit dual emission from both the band edge and the dopant state. Photoluminescence quantum yields and band-edge-to-Mn intensity ratios exhibit strong excitation power dependence, even at a very low incident intensity (<100 µW/cm2). Surprisingly, we find that the saturation of long-lived Mn2+ dopant sites cannot explain our observation. Instead, we propose an alternative mechanism involving the cross-relaxation of long-lived Mn-site excitations by freely diffusing band-edge excitons. We formulate a kinetic model based on this cross-relaxation mechanism that quantitatively reproduces all of the experimental observations and validate the model using time-resolved absorption and emission spectroscopy. Finally, we extract a concentration-normalized microscopic rate constant for band edge-to-dopant excitation transfer that is ∼10× faster in methylammonium-containing nanoplatelets than in formamidinium-containing nanoplatelets. This work provides fundamental insight into the interaction of mobile band edge excitons with localized dopant sites in 2D semiconductors and expands the toolbox for manipulating light emission in perovskite nanomaterials.

Revealing the Brønsted-Evans-Polanyi relation in halide-activated fast MoS2 growth toward millimeter-sized 2D crystals.

Achieving large-size two-dimensional (2D) crystals is key to fully exploiting their remarkable functionalities and application potentials. Chemical vapor deposition growth of 2D semiconductors such as monolayer MoS2 has been reported to be activated by halide salts, for which various investigations have been conducted to understand the underlying mechanism from different aspects. Here, we provide experimental evidence showing that the MoS2 growth dynamics are halogen dependent through the Brønsted-Evans-Polanyi relation, based on which we build a growth model by considering MoS2 edge passivation by halogens, and theoretically reproduce the trend of our experimental observations. These mechanistic understandings enable us to further optimize the fast growth of MoS2 and reach record-large domain sizes that should facilitate practical applications.