Platinum nanosheets synthesized via topotactic reduction of single-layer platinum oxide nanosheets for electrocatalysis.

Increasing the performance of Pt-based electrocatalysts for the oxygen reduction reaction (ORR) is essential for the widespread commercialization of polymer electrolyte fuel cells. Here we show the synthesis of double-layer Pt nanosheets with a thickness of 0.5 nm via the topotactic reduction of 0.9 nm-thick single-layer PtOx nanosheets, which are exfoliated from a layered platinic acid (HyPtOx). The ORR activity of the Pt nanosheets is two times greater than that of conventionally used state-of-the-art 3 nm-sized Pt nanoparticles, which is attributed to their large electrochemically active surface area (124 m2 g-1). These Pt nanosheets show excellent potential in reducing the amount of Pt used by enhancing its ORR activity. Our results unveil strategies for designing advanced catalysts that are considerably superior to traditional nanoparticle systems, allowing Pt catalysts to operate at their full potential in areas such as fuel cells, rechargeable metal-air batteries, and fine chemical production.

Self-Assembly of 2D Nematic and Random Arrays of Sterically Stabilized Nanoscale Rods with and without Evaporation.

The adequate manipulation of nanometer-scale building blocks using dispersion systems is regarded as a fundamental technique to fabricate elaborate microstructures. Although a liquid flow with evaporation is generally regarded as an essential factor for the self-assembly of floating blocks, experimental evidence has not been sufficient to clarify the importance of the flow in the dispersion systems. In the present study, 2D nematic layers of sterically stabilized nanoscale calcite rods were achieved in a millimeter-scale region on a solid substrate via the very slow recession of an organic dispersion with evaporation. 2D random arrays of the nanorods were obtained via recession of the liquid in the same system without evaporation. When the nanorods were not sterically stabilized, 3D random arrays were formed even with evaporation. We demonstrated that the evaporation-driven flow of sterically stabilized nanorods to a confined space at the air-liquid-solid interface is essential for the formation of 2D nematic structures on a substrate.

Crosslinked Poly(N-Isopropylacrylamide)-Based Microfibers as Cell Manipulation Materials with Prompt Cell Detachment.

Stimuli-responsive smart materials are a key to the realization of next-generation medical technologies. Among them, the temperature-responsive polymer poly(N-isopropylacrylamide) (PNIPAAm) is attracting particular attention because it is easy to use in physiological conditions. PNIPAAm-grafted surfaces can undergo temperature-modulated cell adhesion and detachment without proteolytic enzymes, and can be used as cell-separating materials through selective cell adhesion/detachment. However, cell detachment at reduced temperatures is problematic because it takes several hours. A novel thermoresponsive crosslinked microfiber system that can greatly reduce the cell detachment time is introduced in this study. The crosslinked fibers provide temperature-dependent volume change, and enable cell detachment within 10 min of reducing the temperature, which is one-sixth of the time required in previous studies. The prompt cell detachment is thought to arise from a completely new mechanism derived from fiber swelling. This system will make a significant contribution as a novel cell manipulating system for next-generation medical technology.

Adsorption-Desorption Control of Fibronectin in Real Time at the Liquid/Polymer Interface on a Quartz Crystal Microbalance by Thermoresponsivity.

The cell manipulation technique using thermoresponsive polymers is currently attracting much attention for applications in the medical field. To achieve arbitrary and accurate cell control, it is necessary to intensely research fibronectin behavior. A smart surface, which has thermoresponsive wettability and which can adsorb or desorb fibronectin repeatedly without the presence of cells, was fabricated by an electrospinning method. The fabricated coating changed its structure as the temperature was changed, and this transformation could substitute for the pulling force generated by the cytoskeletal contraction of cells. Moreover, a coated quartz crystal microbalance was able to detect the fibronectin behavior as frequency shifts, which could be used in the estimation of the mass shift with the aid of suitable equations. This coating and measurement system can contribute greatly not only to the development in the medical field centered on biomaterial manipulation technologies, but also to the improvement of medical instruments.

Bionic Fish-Scale Surface Structures Fabricated via Air/Water Interface for Flexible and Ultrasensitive Pressure Sensors.

In recent years, wearable and flexible sensors have attracted considerable research interest and effort owing to their broad application prospects in wearable devices, robotics, health monitoring, and so on. High-sensitivity and low-cost pressure sensors are the primary requirement in practical application. Herein, a convenient and low-cost process to fabricate a bionic fish-scale structure poly(dimethylsiloxane) (PDMS) film via air/water interfacial formation technique is presented. High-sensitivity flexible pressure sensors can be constructed by assembling conductive films of graphene nanosheets into a microstructured film. Thanks to the unique fish-scale structures of PDMS films, the prepared pressure sensor shows excellent performance with high sensitivity (-70.86% kPa-1). In addition, our pressure sensors can detect weak signals, such as wrist pulses, respiration, and voice vibrations. Moreover, the whole process of pressure sensor preparation is cost-effective, eco-friendly, and controllable. The results indicate that the prepared pressure sensor has a profitable and efficient advantage in future applications for monitoring human physiological signals and sensing subtle touch, which may broaden its potential applications in wearable devices.

Heat-Shielding and Self-Cleaning Smart Windows: Near-Infrared Reflective Photonic Crystals with Self-Healing Omniphobicity via Layer-by-Layer Self-Assembly.

Bioinspired photonic crystals that can be used to precisely control the optical reflection of light of a specific wavelength by varying their thickness and refractive index have attracted much attention. Among them, photonic crystals that can reflect near-infrared light have attracted attention owing to their potential applications including window coating with heat-shielding property. However, photonic crystals with an optical function in practical use sometimes lose their function because of contamination. Here, a near-infrared reflection coating film with self-healing omniphobicity was designed and prepared by layer-by-layer assembly and an instant liquid phase omniphobization method. The fabricated films had a self-cleaning thermal shielding effect. The films were visually transparent and could be used to control the reflection peak of the near-infrared light (range of 700-1000 nm) by adjusting the film thickness, which prevented the increase in temperature in enclosed spaces. After omniphobization, the films had self-cleaning properties of their surface and retained their optical properties. These functions are promising for practical application on windows as heat-shielding.

Ultrasensitive Detection of Methylmercaptan Gas Using Layered Manganese Oxide Nanosheets with a Quartz Crystal Microbalance Sensor.

Methylmercaptan (MM) is a marker of periodontal disease; however, the required sensitivity for MM is parts per billion, which has been challenging to realize with a simple sensor. Here, we report the capability to detect MM at concentrations as low as 20 ppb using layered manganese oxide nanosheets with a quartz crystal microbalance sensor. The sensing capabilities of the manganese oxide nanosheets are promoted by adsorbed water present on and between the nanosheets. The strong adsorption of MM to the sensor, which is necessary for the high sensitivity, leads to significant hysteresis in the response on cycling due to irreversible adsorption. However, the sensor can be readily reset by heating to 80 °C, which leads to highly reproducible response to MM vapor at low concentrations. A key aspect of this sensor design is the high selectivity toward MM in comparison to other compounds such as ethanol, ammonia, acetaldehyde, acetic acid, toluene, and pyridine. This layered nanosheets design for high-sensitivity sensors, demonstrated here for dilute MM, holds significant promise for addressing needs to identify sulfur compounds associated for environmental protection and medical diagnostics.

Slippery Liquid-Immobilized Coating Films Using in Situ Oxidation-Reduction Reactions of Metal Ions in Polyelectrolyte Films.

We fabricated slippery liquid-immobilized coating (SLIC) films by reacting a slippery liquid (polymethylhydrosiloxane) near the surface of a polyelectrolyte film containing silver ions prepared by the layer-by-layer method. The obtained films maintained their slipperiness after chemical and physical treatments, in contrast to slippery liquid-infused porous surfaces. The high chemical and physical stabilities of the films were attributable to gelation and immobilization of the lubricant owing to an oxidation-reduction reaction with subsequent dehydration condensation of Si-OH on the outer surface of the polyelectrolyte film and the bonding of Si-H with NH2 groups within the polyelectrolyte film, respectively. Moreover, the SLIC films exhibited a high degree of slipperiness with respect to low-surface-tension liquids. To the best of our knowledge, this technique of lubricant immobilization using silver ions has not been reported previously. The films should be suitable for use in various applications where contamination must be prevented under extreme conditions, such as those requiring high physical durability and organic solvent use.

Chitin Nanofibers Extracted from Crab Shells in Broadband Visible Antireflection Coatings with Controlling Layer-by-Layer Deposition and the Application for Durable Antifog Surfaces.

Reflection from various surfaces of many optical systems, such as photovoltaics and displays, is a critical issue for their performance, and antireflection coatings play a pivotal role in a wide variety of optical technologies, reducing light reflectance loss and hence maximizing light transmission. With the current movement toward optically transparent polymeric media and coatings for antireflection technology, the need for economical and environmentally friendly materials and methods without dependence on shape or size has clearly been apparent. Herein, we demonstrate novel antireflection coatings composed of chitin nanofibers (CHINFs), extracted from crab shell as a biomass material through an aqueous-based layer-by-layer self-assembly process to control the porosity. Increasing the number of air spaces inside the membrane led low refractive index, and precise control of refractive index derived from the stacking of the CHINFs achieved the highest transmittance with investigating the surface structure and the refractive index depending on the solution pH. At a wavelength of 550 nm, the transmittance of the coatings was 96.4%, which was 4.8% higher than that of a glass substrate, and their refractive index was 1.30. Further critical properties of the films were the durability and the antifogging performance derived from the mechanical stability and hydrophilicity of CHINFs, respectively. The present study may contribute to a development of systematically designed nanofibrous films which are suitable for optical applications operating at a broadband visible wavelength with durability and antifog surfaces.

Silver Ion Polyelectrolyte Container as a Sensitive Quartz Crystal Microbalance Gas Detector.

A polyelectrolyte film containing metastable silver ions was applied as a quartz crystal microbalance (QCM) gas detector. The polyelectrolyte film was obtained by immersing a polyelectrolyte with numerous amine groups in a metal ion solution. The QCM detector with silver ions responded to a very low methylmercaptan gas concentration (20 ppb) but did not respond to ammonia, volatile amines, aromatic compounds, or alcohols. The response speed of the QCM detector increased gradually with increasing methylmercaptan concentrations. The highly sensitive and selective response is promoted by a ligand substitution reaction caused by the formation of coordinative bonds between a metastable silver ion and amine groups in the polyelectrolyte film. To the best of our knowledge, this system has the highest sensitivity among reported QCM gas detectors. Such high-sensitivity among reported QCM gas detectors. Such high-sensitivity gas detectors for volatile sulfur compounds have wide ranging applications in areas such as volcanic eruption prediction, food inspection, environmental analysis, and medical diagnostics.