Study of degradation of norfloxacin antibiotic and their intermediates by natural solar photolysis.

In this work, the photolysis of the antibiotic norfloxacin (NOR) and the formation of its photodegradation products were studied using UV and solar radiation. Their extraction was also assessed in Milli-Q water and secondary effluents from a wastewater treatment plant. The photolysis of NOR was chromatographically monitored. The structure of each degradation product is related to the reaction of NOR with reactive oxygen species (ROS), as confirmed using radical quenchers and mass spectrometry. Additionally, the feasibility of extracting NOR and its degradation products was assessed using a commercial solid phase extraction system. Photolysis results showed the formation of five degradation products, generated under exposure to both types of radiation. The decays in NOR concentrations for the solar and UV treatments were adjusted to pseudo first-order kinetics with apparent constant values of ksolar = 1.19 × 10-3 s-1 and kUV = 3.84 × 10-5 s-1. Furthermore, the superoxide radical was the main participant species in the formation of the degradation products P3, P4, and P5. Species P1 and P2 do not need this radical for their formation. The presence of NOR in water opens the possibility of its photolysis by solar radiation. This work contributes to the understanding of the mechanisms that mediate its photodegradation, in addition to studying potential options for its determination and its photodegradation products in the sample treatment.

Elimination of pharmaceutical pollutants by solar photoelectro-Fenton process in a pilot plant.

In this study, the simultaneous degradation of antibiotics (ampicillin, sulfamethazine, and tetracycline; and non-steroidal anti-inflammatories (diclofenac and salicylic acid)) including the total organic carbon abatement by solar photoelectro-Fenton process was assessed. Eight liters of solution containing the mixture of the five pharmaceuticals in 1 mmol L-1 Fe2+, 0.05 mol L-1 Na2SO4 at pH 3 and 35 °C were electrolyzed applying different current densities (j = 10, 25, and 50 mA cm-2) in a solar-electrochemical pilot plant. The pilot plant was equipped with an electrochemical filter press cell with a dimensionally stable anode (DSA type) and an air-diffusion cathode coupled to a solar photoreactor exposed directly to sunlight radiation. All pharmaceuticals were degraded during the first 10 min. A TOC removal efficiency of 99.2% after 100 min of treatment with an energy consumption of 534.23 kW h (kgTOC)-1 and 7.15 kW h m-3 was achieved. The pharmaceutical concentration decay followed a pseudo-first-order kinetics. The specific energy per unit of mass of ampicillin, diclofenac, salicylic acid, sulfamethazine, and tetracycline was obtained at 11.73, 19.56, 35.2, 11.73, and 39.32 kW h (kgPD)-1 for ampicillin, diclofenac, salicylic acid, sulfamethazine, and tetracycline, respectively. With our results, we demonstrated that SPEF is an emerging technology for the treatment of this type of pollutants in short time.

Polymeric ionic liquid immobilized onto paper as sorptive phase in microextraction.

A new planar sorptive phase based on the simple immobilization of polymeric ionic liquids on paper is proposed. The sorptive phase can develop hydrophobic or mixed-mode (combining hydrophobic and ion exchange) interactions with the target analytes. The polymer is prepared by the Radziszewski reaction, which takes place in aqueous media, and it has been thoroughly characterized by different techniques including infrared spectroscopy, matrix-assisted laser desorption/ionization coupled to high-resolution mass spectrometry and proton nuclear magnetic resonance. Three different strategies aimed to immobilize the polymeric ionic liquid on paper have been evaluated. Among them, simple thermal curing at 120 °C was selected. The as-prepared paper has been evaluated for the extraction of several non-steroidal anti-inflammatory drugs from urine, the analytes being finally determined by liquid chromatography with tandem mass spectrometry. The method detection limits were 3.8, 7.2, 6.8, 9.4, 15.7, and 5.1 µg/L for indomethacin, diclofenac, tolmetin, ketoprofen, naproxen, and ibuprofen, respectively. Calibration models were linear (R2 > 0.9949) up to 1000 µg/L. The intra-day precision, expressed as relative standard deviation and calculated at three different concentrations levels (limit of quantification, 250 µg/L, and 1000 µg/L), varied between 1.1 and 13%. The accuracy, calculated as relative recovery, was in the range from 72 to 95%, thus being considered appropriate. The easiness of polymeric ionic liquid paper synthesis and the multi-sample extraction protocol designed allows the processing of a high number of samples at the same time.

Application of Switchable Hydrophobicity Solvents for Extraction of Emerging Contaminants in Wastewater Samples.

In the present work, the effectiveness of switchable hydrophobicity solvents (SHSs) as extraction solvent (N,N-Dimethylcyclohexylamine (DMCA), N,N-Diethylethanamine (TEA), and N,N-Benzyldimethylamine (DMBA)) for a variety of emerging pollutants was evaluated. Different pharmaceutical products (nonsteroidal anti-inflammatory drugs (NSAIDs), hormones, and triclosan) were selected as target analytes, covering a range of hydrophobicity (LogP) of 3.1 to 5.2. The optimized procedure was used for the determination of the target pharmaceutical analytes in wastewater samples as model analytical problem. Absolute extraction recoveries were in the range of 51% to 103%. The presented method permits the determination of the target analytes at the low ng mL-1 level, ranging from 0.8 to 5.9 (except for Triclosan, 106 ng mL-1) with good precision (relative standard deviation lower than 6%) using high-pressure liquid chromatography (HPLC) combined with ultraviolet (DAD) and fluorescence (FLR) detection. The microextraction alternative resulted in a fast, simple, and green method for a wide variety of analytes in environmental water sample. The results suggest that this type of solvent turns out to be a great alternative for the determination of different analytes in relatively complex water samples.

Critical evaluation of third-order advantage with highly overlapped spectral signals. Determination of fluoroquinolones in fish-farming waters by fluorescence spectroscopy coupled to multivariate calibration.

In this work, the analytical performance of a third-order/four-way calibration is evaluated to model a highly overlapped system, where two spectral dimensions are extremely similar, and the results are then compared with the results of second-order/three-way calibration. The four-way data were obtained during the photodegradation of fluoroquinolones (ciprofloxacin, norfloxacin and flumequine) in the form of excitation-emission matrices and modeled by unfolded partial least squares coupled to residual trilinearization (U-PLS-RTL). According to the results, the model obtained with the second-order algorithm (unfolded partial least squares coupled to residual bilinearization: U-PLS-RBL) was unsatisfactory due to high spectral overlap. The third-order approach obtained a satisfactory fit and better figures of merit (LOD, REP, RMSEP, and sensitivity, among others) even in the presence of unexpected interferences due to third-order advantages. Finally, the analytical method based on third-order multivariate calibration was applied to quantify these fluoroquinolones in spiked fish-farming water samples. In this case, the third-order advantage allowed us to satisfactorily model the data and to quantify these compounds in this complex matrix, demonstrating the superior analytical performance of the high-order data that were evaluated.

Treatment of winery wastewater by anodic oxidation using BDD electrode.

The effective removal of organics from winery wastewater was obtained in real residual effluents from the wine industry using anodic oxidation (AO). The effluent had an initial organic load of [COD]0 of 3490 mg L-1 equal to [TOC]0 of 1320 mg L-1. In addition, more than 40 organic compounds were identified by means of GC-MS. Different density currents as well as the addition of electrolytes were tested during electrolysis. The results show the decay of [COD]t by 63.6% when no support electrolyte was added, whereas almost total mineralization and disinfection was reached after adding of 50 mM of sodium sulfate and sodium chloride and applying higher density currents. The presence of sulfate and chloride in large concentration favors the production of oxidants such as hydroxyl radicals and active chlorine species that react with organics in solution. Moreover, the addition of a supporting electrolyte to industrial wastewater increases conductivity, reduces cell potential and therefore, decreases the energy consumption of the AO process.

Ionic liquids for improving the extraction of NSAIDs in water samples using dispersive liquid-liquid microextraction by high performance liquid chromatography-diode array-fluorescence detection.

A rapid, sensitive and efficient analytical method based on the use of ionic liquids for determination of non-steroidal anti-inflammatory drugs (NSAIDs) in water samples was developed. High-performance liquid chromatography equipped with a diode array and fluorescence detector was used for quantification of ketoprofen, ibuprofen and diclofenac in tap and river water samples. This new method relies on the use of two ionic liquids with multiple functionalities: one functions as an extraction solvent (1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), and the other changes the polarity in the aqueous medium (1-butyl-3-methylimidazolium tetrafluoroborate, ([BMIM][BF4]). Factors such as the type and volume of the ILs and dispersive solvent, sample volume, and centrifugation time were investigated and optimized. The optimized method exhibited good precision, with relative standard deviation values between 2% and 3%, for the three NSAIDs. Limits of detection achieved for all of the analytes were between 17 and 95 ng mL(-1), and the recoveries ranged from 89% to 103%. Furthermore, the enrichment factors ranged from 49 to 57. The proposed method was successfully applied to the analysis of NSAIDs in tap and river water samples.