RESUMO
Polymer coatings are used for a number of applications such as for decorative purposes, to protect surfaces and as functional parts of devices. The mechanical integrity of the coatings is critical to their function and hence it is important that the coatings do not fail during their lifetime. Here, we present a simple model to determine conditions under which drying films of polymer solutions can crack. The model accounts for the properties of the polymer film and substrate and predicts the tensile stress developed in the drying film. As the tensile stress increases and exceeds a critical value, the film relaxes by nucleating a crack. The model predicts a critical thickness below which the film does not crack. The predicted critical cracking thickness is compared with experiments performed on drying films of silicone resin on six different substrates with the value of Young's modulus spanning over six decades. The predicted trend matches the measurements.
RESUMO
The coatings in osmotic tablets play a critical role in controlling the release of active pharmaceutical ingredient. Coatings are formed by spraying dilute polymer solution onto the tablet surface. During drying, the films develop shrinkage stress, which can cause cracking. The coatings are also subject to large tensile stress generated by osmotic pressure during the dissolution process, which may rupture the coating. Despite the role of tensile stress in causing fracture in osmotic tablet coatings, a rigorous quantification of the drying stress, mechanical properties and microstructure is missing. The present work fills this gap via detailed measurement of drying stress, Young's modulus and fracture properties of osmotic tablet coatings of cellulose acetate mixed with two different plasticisers, namely polyethylene glycol and hydroxypropyl cellulose. The measurements were complemented with imaging of the surface and the cross-section of films using scanning electron microscopy so as to relate the drying stress and mechanical properties to the microstructure of the films. The phase separation during the drying process increases the pore size, while simultaneously decreasing the modulus and the peak drying stress of the drying films. The results suggest that films with strong adhesion to the tablet surface will not rupture but if the films delaminate, the drying stress are sufficiently large to cause rupture. The detailed study presented here provides guidelines to the formulator for designing rupture-free osmotic coatings.
Assuntos
Polietilenoglicóis , Polímeros , Osmose , Polímeros/química , Estresse Mecânico , ComprimidosRESUMO
To understand the spread of SARS-CoV2, in August and September 2020, the Council of Scientific and Industrial Research (India) conducted a serosurvey across its constituent laboratories and centers across India. Of 10,427 volunteers, 1058 (10.14%) tested positive for SARS-CoV2 anti-nucleocapsid (anti-NC) antibodies, 95% of which had surrogate neutralization activity. Three-fourth of these recalled no symptoms. Repeat serology tests at 3 (n = 607) and 6 (n = 175) months showed stable anti-NC antibodies but declining neutralization activity. Local seropositivity was higher in densely populated cities and was inversely correlated with a 30-day change in regional test positivity rates (TPRs). Regional seropositivity above 10% was associated with declining TPR. Personal factors associated with higher odds of seropositivity were high-exposure work (odds ratio, 95% confidence interval, p value: 2.23, 1.92-2.59, <0.0001), use of public transport (1.79, 1.43-2.24, <0.0001), not smoking (1.52, 1.16-1.99, 0.0257), non-vegetarian diet (1.67, 1.41-1.99, <0.0001), and B blood group (1.36, 1.15-1.61, 0.001).
Assuntos
Anticorpos Neutralizantes/sangue , Anticorpos Antivirais/sangue , Teste Sorológico para COVID-19 , COVID-19/epidemiologia , SARS-CoV-2/imunologia , Biomarcadores/sangue , COVID-19/diagnóstico , COVID-19/imunologia , COVID-19/virologia , Feminino , Interações Hospedeiro-Patógeno , Humanos , Imunidade Humoral , Índia/epidemiologia , Estudos Longitudinais , Masculino , Valor Preditivo dos Testes , Medição de Risco , Fatores de Risco , Estudos Soroepidemiológicos , Fatores de TempoRESUMO
Thin films of polymer coatings have important industrial applications ranging from paints and coatings to pharmaceuticals. In many applications, the coatings are obtained by applying thin films of dilute polymer solutions, wherein the solvent evaporates to leave behind a thin polymer film. In some cases, the thin films may crack due to shrinkage stresses developed during drying. While a number of studies have focused on the stress development, the phenomenon of cracking in polymer films is not fully investigated. In the present work, thin films of a silicone polymer solution were cast on substrates of varying Young's moduli and investigated for cracking as a function of film thickness and substrate modulus. Micro-Raman spectroscopy measurements show that thin films dry uniformly while thick films form a skin at the top surface leading to slow drying rates. Transverse stresses were measured using the cantilever technique and related to the extent of cracking in the film. We investigated the influence of substrate rigidity on the cracking behavior and found that decreasing the stiffness of the substrate increases the extent of cracking.