RESUMO
UV-quenching substance (UVQS), as an emerging municipal solid waste (MSW)-derived leachate contaminant, has a potential to interfere with UV disinfection when leachate is disposed of at publicly owned treatment works (POTWs). The objective of this study was to evaluate and compare two chemical oxidation processes under different operational conditions, i.e. Fenton process and ozonation, for alleviation of UV254 absorbance of a biologically pre-treated landfill leachate. Results showed that leachate UV254 absorbance was reduced due to the UVQS decomposition by hydroxyl radicals (·OH) during Fenton treatment, or by ozone (O3) and ·OH during ozonation. Fenton process exhibited a better treatment performance than ozonation under their respective optimal conditions, because ·OH could effectively decompose both hydrophobic and hydrophilic dissolved organic matter (DOM), but O3 tended to selectively oxidize hydrophobic compounds alone. Different analytical techniques, including molecular weight (MW) fractionation, hydrophobic/hydrophilic isolation, UV spectra scanning, parallel factor (PARAFAC) analysis, and fluorescence excitation-emission matrix spectrophotometry, were used to characterize UVQS. After either oxidation treatment, residual UVQS was more hydrophilic with a higher fraction of low MW molecules. It should be noted that the removed UV254 absorbance (ΔUV254) was directly proportional to the removed COD (ΔCOD) for the both treatments (Fenton process: ΔUV254 = 0.011ΔCOD; ozonation: ΔUV254 = 0.016ΔCOD). A greater ΔUV254/ΔCOD was observed for ozonation, suggesting that oxidant was more efficiently utilized during ozonation than in Fenton treatment for mitigation of the UV absorbance.
Assuntos
Eliminação de Resíduos , Poluentes Químicos da Água/química , Peróxido de Hidrogênio/química , Oxirredução , Ozônio/química , Raios UltravioletaRESUMO
Los autores se refieren al desarrollo y uso de los gráficos "Envolventes de Operación" para definir los límites de funcionamiento normal de sistemas de lodos activados de mezcla completa y para solucionar los problemas operativos que se presentan
Assuntos
Lodos AtivadosRESUMO
Los autores se refieren al desarrollo y uso de los gráficos "Envolventes de Operación" para definir los límites de funcionamiento normal de sistemas de lodos activados de mezcla completa y para solucionar los problemas operativos que se presentan
