Microwave-assisted micellar extraction coupled with solid-phase extraction for preconcentration of pharmaceuticals in molluscs prior to determination by HPLC.

A simple and specific analytical method was developed and tested for the determination of pharmaceuticals in mollusc samples. A combination of microwave-assisted micellar extraction (MAME) and solid-phase extraction (SPE) using a non-ionic surfactant, polyoxyethylene 10 lauryl ether, was examined to extract and determine simultaneously a group of pharmaceuticals such as carbamazepine, clorfibric acid, ketoprofen, naproxen, bezafibrate and ibuprofen by liquid chromatography using UV-diode array detector. The MAME extraction performance was evaluated by studying various parameters such as the volume and concentration of surfactant and microwave conditions. Finally, an OASIS HLB cartridge was used as an optimum SPE sorbent to clean up the extracts and preconcentrate the selected analytes. The proposed method showed satisfactory linearity and reproducibility (between 3 and 15%), as well as detection limits ranging from 30 to 220 ng/g. Finally, the method was successfully applied to the determination of the target pharmaceuticals in various kinds of mollusc samples. This study has demonstrated that microwave-assisted micellar extraction with solid-phase extraction may be used as a viable alternative to conventional methods for the extraction of pharmaceuticals in this type of matrices.

Implementation of solid-phase microextraction with micellar desorption method for priority phenolic compound determination in natural waters.

Eleven phenolic compounds considered by the Environmental Protection Agency to be priority pollutants are extracted and determined in different water samples. The method involves the extraction and clean-up step of target compounds by solid-phase microextraction and micellar desorption (SPME-MD) and a second step of determination by liquid chromatography with diode array detection. Different fibers and surfactants are evaluated for the analysis of these target analytes in water samples. In the optimum conditions for the SPME process, recoveries for the target compounds are between 80% and 109%; relative standard deviations are lower than 10%, and detection limits are in the range 0.3-3.5 ng/mL. The main advantages of this method are the combination of time and efficiency, safety, and an environmentally friendly process for sample extraction prior to instrumental determination. This demonstrates that SPME-MD can be used as an alternative to traditional methods for the extraction and determination of priority phenolic compounds in natural waters from different origins.

Preconcentration of pharmaceuticals residues in sediment samples using microwave assisted micellar extraction coupled with solid phase extraction and their determination by HPLC-UV.

An analytical method combining microwave assisted micellar extraction (MAME) and solid phase extraction (SPE) has been developed to extract and preconcentrate a selected group of eight pharmaceutical compounds in sediment samples prior to their determination using liquid chromatography with an UV-DAD detector. A non-ionic surfactant, Polyoxyethylene 10 lauryl ether (POLE) was used for the MAME extraction and the different parameters for the optimization process were studied. Then, SPE was used to clean-up and preconcentrate the target analytes in the extract, prior to their determination using HPLC-UV. The method was applied to the determination of the selected pharmaceuticals compounds in several kinds of sediment samples with different characteristics. Relative recoveries for spiked sediment samples were over 70% and relative standard deviations (RSDs) were under 11% for all recoveries tested. Detection limits between 4 and 167ngg(-1) were obtained. The method was validated using Soxhlet extraction procedure.

Solid-phase microextraction of benzimidazole fungicides in environmental liquid samples and HPLC-fluorescence determination.

Solid-phase microextraction (SPME) coupled with high-performance liquid chromatography (HPLC) with fluorescence detection was optimized for extraction and determination of four benzimidazole fungicides (benomyl, carbendazim, thiabendazole, and fuberidazole) in water. We studied extraction and desorption conditions, for example fiber type, extraction time, ionic strength, extraction temperature, and desorption time to achieve the maximum efficiency in the extraction. Results indicate that SPME using a Carboxen-polydimethylsiloxane 75 microm (CAR-PDMS) fiber is suitable for extraction of these types of compound. Final analysis of benzimidazole fungicides was performed by HPLC with fluorescence detection. Recoveries ranged from 80.6 to 119.6 with RSDs below 9% and limits of detection between 0.03 and 1.30 ng mL-1 for the different analytes. The optimized procedure was applied successfully to the determination of benzimidazole fungicides mixtures in environmental water samples (sea, sewage, and ground water).

Optimisation of solid-phase microextraction coupled to HPLC-UV for the determination of organochlorine pesticides and their metabolites in environmental liquid samples.

A solid-phase microextraction (SPME) procedure using two commercial fibers coupled with high-performance liquid chromatography (HPLC) is presented for the extraction and determination of organochlorine pesticides in water samples. We have evaluated the extraction efficiency of this kind of compound using two different fibers: 60-mum polydimethylsiloxane-divinylbenzene (PDMS-DVB) and Carbowax/TPR-100 (CW/TPR). Parameters involved in the extraction and desorption procedures (e.g. extraction time, ionic strength, extraction temperature, desorption and soaking time) were studied and optimized to achieve the maximum efficiency. Results indicate that both PDMS-DVB and CW/TPR fibers are suitable for the extraction of this type of compound, and a simple calibration curve method based on simple aqueous standards can be used. All the correlation coefficients were better than 0.9950, and the RSDs ranged from 7% to 13% for 60-mum PDMS-DVB fiber and from 3% to 10% for CW/TPR fiber. Optimized procedures were applied to the determination of a mixture of six organochlorine pesticides in environmental liquid samples (sea, sewage and ground waters), employing HPLC with UV-diode array detector.