Design of Promising Uranyl(VI) Complexes Thin Films with Potential Applications in Molecular Electronics.

In this work, it is proposed the development of organic semiconductors (OS) based on uranyl(VI) complexes. The above by means of the synthesis and the characterization of the complexes by Infrared spectroscopy, Nuclear magnetic resonance spectroscopy, mass spectrometry, and X-ray diffraction. Films of these complexes were deposited and subsequently, topographic and structural characterization was carried out by Scanning Electron Microscopy, X-ray diffraction, and Atomic Force Microscopy. Additionally, the nanomechanical evaluation was performed to know the stiffness of uranyl films using their modulus of elasticity. Also, the optical characterization took place in the devices and their bandgap value ranges between 2.40 and 2.93 eV being the minor for the film of the uranyl complex with the N on pyridine in position 4 (2 c). Finally, the electrical behavior of the uranyl(VI) films was evaluated, and important differences were obtained: the uranyl complex with the N on pyridine in position 2 (2 a) film is not influenced by changes in lighting and its current density is in the order of 10-3 A/cm2. The film with uranyl complex with the N on pyridine in position 3 (2 b) and 2 c presents a greater current flow under lighting conditions and two orders of magnitude larger than in film 2 a. In these films 2 b and 2 c, ohmic behavior occurs at low voltages, while at high voltages the charge transport changes to space-charge limited current behavior.

Triggering the dynamics of a carbazole-p-[phenylene-diethynyl]-xylene rotor through a mechanically induced phase transition.

A new rotor exhibits rich solvatomorphism behavior with eight X-ray structures obtained. A heterogeneous solid obtained by mechanical stress exhibited a dominant isotropic 2H line shape at high temperatures. The motion occurs only in the amorphous component of this solid, with an Ea of 7.4 kcal mol-1 and a low pre-exponential factor A of 6.22 × 1010 s-1, which indicates that the motion requires the distortion of the molecular axis.

Arenediazonium salts as electrophiles for the oxidative addition of gold(i).

Arenediazonium salts generated in situ from anilines have been found for the first time to efficiently oxidize [AuCl(L)] (L = SMe2, PPh3) complexes in DMSO as a solvent, under thermal conditions. The structure of the [AuArCl2(L)] complexes formed has been confirmed by X-ray diffraction analyses. These complexes have been used as intermediates, in a one pot cross-coupling reaction of anilines with silver acetylides.

Further Insight into the Lability of MeCN Ligands of Cytotoxic Cycloruthenated Compounds: Evidence for the Antisymbiotic Effect Trans to the Carbon Atom at the Ru Center.

The two MeCN ligands in [Ru(2-C6H4-2'-Py-κC,N)(Phen, trans-C)(MeCN)2]PF6 (1), both trans to a sp(2) hybridized N atom, cannot be substituted by any other ligand. In contrast, the isomerized derivative [Ru(2-C6H4-2'-Py-κC,N)(Phen, cis-C)(MeCN)2]PF6 (2), in which one MeCN ligand is now trans to the C atom of the phenyl ring orthometalated to Ru, leads to fast and quantitative substitution reactions with several monodentate ligands. With PPh3, 2 affords [Ru(2-C6H4-2'-Py-κC,N)(Phen, cis-C)(PPh3)(MeCN)]PF6 (3), in which PPh3 is trans to the C σ bound to Ru. Compound 3 is not kinetically stable, because, under thermodynamic control, it leads to 4, in which the PPh3 is trans to a N atom of the Phen ligand. Dimethylsulfoxide (DMSO) can also substitute a MeCN ligand in 2, leading to 5, in which DMSO is coordinated to Ru via its S atom trans to the N atom of the Phen ligand, the isomer under thermodynamic control being the only compound observed. We also found evidence for the fast to very fast substitution of MeCN in 2 by water or a chloride anion by studying the electronic spectra of 2 in the presence of water or NBu4Cl, respectively. An isomerization related to that observed between 3 and 4 is also found for the known monophosphine derivative [Ru(2-C6H4-2'-Py-κC,N)(PPh3, trans-C)(MeCN)3]PF6 (10), in which the PPh3 is located trans to the C of the cyclometalated 2-phenylpyridine, since, upon treatment by refluxing MeCN, it leads to its isomer 11, [Ru(2-C6H4-2'-Py-κC,N)(PPh3, cis-C)(MeCN)3]PF6. Further substitutions are also observed on 11, whereby N^N chelates (N^N = 2,2'-bipyridine and phenanthroline) substitute two MeCN ligands, affording [Ru(2-C6H4-2'-Py-κC,N)(PPh3, cis-C)(N^N)(MeCN)]PF6 (12a and 12b). Altogether, the behavior of the obtained complexes by ligand substitution reactions can be rationalized by an antisymbiotic effect on the Ru center, trans to the C atom of the cyclometalated unit, leading to compounds having the least nucleophilic ligand trans to C whenever an isomerization, involving either a monodentate or a bidentate ligand, is possible.

Microphyllandiolide, a new diterpene with an unprecedented skeleton from Salvia microphylla.

Microphyllandiolide (1), an unprecedented rearranged clerodane-type diterpene with a 9/3 bicyclic ring system, was isolated from the aerial parts of Salvia microphylla Kunth. Its structure was elucidated by analysis of its spectroscopic data and confirmed by single crystal X-ray diffraction analysis. A possible biogenesis for microphyllandiolide (1) is proposed.

Synthesis of Fischer type-carbene complexes containing a coordinated thioimidate structural motif.

This paper describes a tandem strategy to synthesize a series of new Fischer carbene complexes [(CO)(4)M=C[N-(CH(2))(4)-]CH=C(NRR')(SR'); M = Cr, W; R = Ar, R' = Me, -(CH(2))(2)-] with a thioimide or thiazoline fragment, in which the sulfur or nitrogen atom is coordinated to a metal center, depending on the nature of alkylating groups included as R'. We have trapped by protonation the proposed intermediate as the thioamide 12 [(CO)(5)W=[N-(CH(2))(4)-]CH(2)C(S)NHPh], which reveals the pathway of this reaction.

Solubilizing functionalized molecular aluminosilicates.

Molecular aluminosilicate Al(SH)(micro-O)Si(OH)(O(t)Bu)(2) ( = [HC{C(Me)N(Ar)}(2)](-), Ar = 2,6-(i)Pr(2)C(6)H(3)) has been prepared from Al(SH)(2) and ((t)BuO)(2)Si(OH)(2) in high yield. When reacted with one equiv. of water, the unique aluminosilicate containing two terminal hydroxy groups Al(OH.THF)(mu-O)Si(OH)(O(t)Bu)(2) can be isolated. However, when is reacted with the bulkier silanol ((t)BuO)(3)SiOH, no reaction is observed. The desired Al(SH)(micro-O)Si(O(t)Bu)(3) can be prepared in a two-step synthesis between AlH(2) and ((t)BuO)(3)SiOH giving first Al(H)(micro-O)Si(O(t)Bu)(3), which reacts further with elemental sulfur to give as the only product. Direct hydrolysis of was conducted to obtain Al(OH)(micro-O)Si(O(t)Bu)(3), however, such hydrolysis always resulted in a complete decomposition of the starting material. Therefore we used boric acid, which condenses in non-polar solvents and slowly evolve water, to hydrolyze to under mild conditions. Compounds , and have been characterized by single-crystal X-ray diffraction.

(Z)-Ethyl 3-(2,4,6-trimethyl-anilino)but-2-enoate.

The title compound, C(15)H(21)NO(2), was obtained by the reaction of acetoacetate with 2,4,6-trimethyl-aniline using Mexican bentonitic clay as a catalyst. It crystallizes in the enamine form. The ß-enamino ester residue is almost perpendicular to the aromatic ring [dihedral angle = 88.10 (6)°]. The mol-ecular conformation is stabilized by a strong intra-molecular N-H⋯O hydrogen bond. In addition, the N-H group forms a weak inter-molecular N-H⋯O hydrogen bond linking the mol-ecules into centrosymmetric dimers.

Synthesis and characterization of novel dinuclear copper(I) complexes. Dimerization of [CuL(PPh3)2] (L = methyl 3-hydroxy-3-(p-R-phenyl)-2-propenedithioate).

We report the synthesis of new copper(I) complexes 6a-e from methyl 3-hydroxy-3-(p-R-phenyl)-2-propenedithioate ligands. These complexes were characterized by IR and 1H, 13C, and 31P NMR spectroscopy. The expected O,S-coordination mode was confirmed by the X-ray diffraction studies of 6b and 6e. The unexpected dimerization of 6b-e leads to the formation of four novel dinuclear copper(I) compounds (7b-e). The dinuclear complex structure was fully established by the X-ray diffraction analysis of 7a, in which the presence of a Cu-Cu interaction was observed.

Synthesis, characterization, and tautomerism of four novel copper(I) complexes from 3-hydroxy-3-(p-R-phenyl)-2-propenedithioic acids.

The paper describes the synthesis and structural characterization of four novel copper(I) complexes [CuL(PPh(3))(2)] (L = 3-hydroxy-3-(p-R-phenyl)-2-propenedithioate). In addition, a tautomeric equilibrium in solution was found and Hammett correlations with (13)C NMR parameters were studied. The structure of one complex was fully established by X-ray diffraction analysis.