Quantitative determination of selected elements in infant baby formulae and baby food cereals commercially available in Serbia using the ICP OES method.

The aim of this paper was the quantitative determination of some macro and trace elements, especially potentially toxic elements in the samples of infant baby formulae and baby food cereals commercially available in Serbia using the inductively coupled plasma optical emission spectrometry (ICP OES) method. Among the macro elements, K is the most abundant in all infant formulae samples, followed by Ca, P, Na and Mg. On the other hand, the analysis of food cereals showed that P is presents in the highest contents, followed by K, Ca, Na, and Mg. Potentially toxic elements As, Pb, Hg, and Cd were not detected in any sample of infant formulae, while Cd was detected and quantified in cereal foods. Also, the calculated values of Estimated Tolerable Weekly Intake (ETWI) as well as the Estimated Tolerable Monthly Intake (ETMI) were lower than recommended values for a tolerable weekly intake (TWI) and provisional tolerable monthly intake (PTMI).

Creation of products made from honey based on the content of elements determined by ICP-OES.

People of different age can consume honey, but the taste is often not accepted easily. Therefore, products made from honey with a pleasant taste and high nutritional and health benefits are highly demanded on the market. Honey is a bioindicator of environmental pollution. Certain plants are known as high accumulators of toxic elements. Here on the example of three honey-based prototypes, with sesame, shelled pumpkin, sunflower seeds, plums, walnut, almond, hazel, and cinnamon as minor ingredients, we demonstrated the creation of new products putting the accent on the content of toxic and potentially toxic elements, usually treated as irrelevant in making products. Nineteen elements (Al, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, Si, and Zn) were determined by ICP-OES after oven-based and wet digestion methods in blossom honey and prototypes samples. Among the investigated elements, the most abundant element in blossom honey for the products and the investigated products was potassium in most cases. Investigated honey (used for the products) and two of the products contain small quantities of toxic and potentially toxic elements. However, the second product, containing besides honey two accumulators of toxic metals (sesame, sunflower seeds), shows higher values for toxic elements. Therefore, the ICP-OES analysis can be a good step in making new products with high nutritional and health values but almost free from toxic and potentially toxic elements.

Trace element content in commercial complementary food formulated for infants and toddlers: Health risk assessment.

The study aimed to analyze trace elements content in baby purees and fruit juices and to evaluate the health risk of young children. The average daily dose, hazard quotient, hazard index and total diet hazard quotient were calculated to assess the potential health risk on per capita and consumers only groups of infants and toddlers. There was no significant health risk for studied groups regarding the intake of trace elements via purees and juices consumption. Health risk for lead was not estimated since the oral reference dose for this metal was not yet established and PTWI value was withdrawn. The average daily dose of lead for infants (0.32 - 0.46 µg/kg bw/day) and toddlers (2.01 - 2.29 µg/kg bw/day) were in accordance with the daily lead exposure intervals estimated by EFSA. Applying statistical analysis, the products were classified into three groups according to the content of trace elements.

Mineral Composition of Herbaceous Species Seseli rigidum and Seseli pallasii: a Chemometric Approach.

Nutrients play an essential role in many metabolic processes whose deficiency or excess can be harmful to the plant itself and through the food chain to both animals and humans. Medicinal plants used in the food and pharmaceutical industries can be contaminated with increased concentrations of heavy metals. The plant species Seseli rigidum and Seseli pallasii from the Balkan Peninsula are used in traditional medicine and spices in the diet, so it was necessary to determine the mineral composition to ensure their safe application. In this work, the mineral composition was determined in medicinal species of the genus Seseli using inductively coupled plasma with optical emission spectrometry (ICP-OES). Two multivariate statistic methods -principal component analysis (PCA) and hierarchical cluster analysis (HCA) were applied to distinguish samples regarding their mineral composition. The mineral composition of both studied species is following the literature data. The results obtained using multivariate statistics methods agree and distinguish certain parts of the tested plants based on the highest content of micro, macro, or trace elements.

Chemometric characterization of heavy metals in soils and shoots of the two pioneer species sampled near the polluted water bodies in the close vicinity of the copper mining and metallurgical complex in Bor (Serbia): Phytoextraction and biomonitoring contexts.

In terms of investigating the authentic plant biomonitoring and phytoextraction potentials, the samples of soils and shoots of the sun spurge (SS) and common nettle (CN), were collected near several polluted water bodies in the close vicinity of the copper mining/metallurgical complex in Bor (Serbia) and characterized with regard to the content of heavy metal(oid)s: As, Cd, Pb, Cu, and Zn. The methods applied in this work such as inductively coupled plasma-mass spectrometry, one-way analysis of variance, Pearson's correlation study, hierarchical cluster analysis, and the calculation of bioaccumulation rates (expressed through the so called mobility ratios, MRs), provided very informative data on the potentials of both investigated pioneer species. The most important findings were: 1) In most cases, SS was more effective in metal extraction/translocation/bioaccumulation than CN, and especially with regard to Cu; in this particular case, extremely high concentrations were recorded and also, some significant MRs were calculated, which may be a signal of its promising potential for Cu-phytoremediation, practically, Cu-phytoextraction; however, generally, the values of most calculated MRs were very low (<1, for both plants); 2) The shoots of both plants reflected soundly the current status of metal presence in the studied environment and they can be recommended for seasonal screenings of a general level of metal pollution in the areas of interest; however, specifically, they cannot reflect quite correctly the level of soil pollution; 3) Soil Cu, and As were detected in alarming concentrations.

Optimization and validation of the kinetic spectrophotometric method for quantitative determination of the pesticide atrazine and its application in infant formulae and cereal-based baby food.

BACKGROUND: Pesticides are potentially toxic to humans and can produce both acute and chronic health effects, depending on the quantity and the ways in which a person is exposed. Exposure to pesticides can cause serious health problems. Infants and young children are particularly sensitive to these contaminants because their brains and organ systems are not fully developed. For this reason, it is important to determine the quantities of pesticides in baby food. RESULTS: The aim of this study was to develop a kinetic-spectrophotometric method for atrazine determination and to apply it to determine pesticide in baby-food samples, using solid-phase extraction (SPE) followed by the kinetic-spectrophotometric method and the high-performance liquid chromatography (HPLC) method. This method is based on the inhibition effect of atrazine (the oxidation of sulfanilic acid (SA) by hydrogen peroxide in the alkaline medium in the presence of the Co2+ ion). Under the experimental conditions used, atrazine showed a linear dynamic range of 0.5 to 5.0 µg mL-1 , and from 5.0 to 70.00 µg mL-1 with relative standard deviations (RSD) from 1.91% to 9.41%. The limit of detection and the limit of quantification were 0.074 and 0.225 µg mL-1 , respectively. The kinetic method was successfully applied to determine the atrazine concentration in spiked samples after SPE of samples. High-performance liquid chromatography was used to verify the results. CONCLUSION: The proposed method is highly sensitive, simple, easy, requires cheap reagents, and leads to good recovery levels. It is linear, precise, and accurate. It can be used successfully for the routine analysis of atrazine in infant formulae and cereal-based food samples. © 2019 Society of Chemical Industry.

The Evaluation of ICP OES for the Determination of Potentially Toxic Elements in Lipsticks: Health Risk Assessment.

This study aimed to optimize and validate the inductively coupled plasma optical emission spectrometric method (ICP OES) for the simultaneous determination of eleven potentially toxic elements (Al, Cd, Cr, Co, Cu, Ni, Pb, Fe, Sb, Mn, and Zn) in lipstick samples. The method was evaluated by applying the standard addition method. The recoveries for all elements in lipsticks were between 90% and 110%, except for Cd and Pb they were <90% and >110%, respectively. The health risk assessment was determined by calculating the average daily intake (ADD), hazard quotient (HQ), and hazard index (HI). The highest mean value for ADD was for Fe (4.8×10-1 mg kg-1 day-1), and the lowest was for Co (9.3×10-6 mg kg-1 day-1). There was no significant toxic health risk for any of the elements (HQ < 1), except for Fe (HQ < 3) which indicates a potential health risk. Based on PCA, all potentially toxic elements have been classified in the three groups. The first group includes Fe, the second includes Al, and all other elements belong to the third group. The cluster analysis of the elements provided the identical grouping that was obtained on the basis of PCA. Two separate clusters were obtained when cluster analysis was applied to the analyzed samples. The first cluster contained the only sample that was brown. The second cluster was divided into two sub-clusters. The first sub-cluster included the samples belonging to category I regarding the price, while the second sub-cluster included the samples belonging to category II and III regarding the price.

The content of the potentially toxic elements, iron and manganese, in the grapevine cv Tamjanika growing near the biggest copper mining/metallurgical complex on the Balkan peninsula: phytoremediation, biomonitoring, and some toxicological aspects.

Plants growing in areas polluted by heavy metals represent excellent models for the investigations related to their potentials for hazardous metals accumulation which further may help in the estimation of plant practical biomonitoring and phytoremediation potentials. In this study, the potentials of the grapevine cultivar Tamjanika from a highly polluted region in Eastern Serbia, with intensive copper mining and metallurgical activities, were estimated in regard to the potentially toxic elements such as iron and manganese; the potential danger from these metals through fruit consummation is also considered. Used methods were the following: ICP-OES analysis, calculation of biological coefficients, the Pearson correlation study, one-way ANOVA, and hierarchical cluster analysis. The results revealed that a great majority of the recorded concentrations in different plant organs were in the range of normal concentrations, as well as that the calculated accumulation rates for both metals were very low. The data also pointed to generally minimal to moderate enrichment by these metals which represents totally dissimilar situation in comparison with other heavy metals detected in the very same plant samples. The results of this study suggested that the investigated plants of the grapevine cv Tamjanika assimilated iron and manganese predominately according to their individual needs, and confirmed that the utilization of this plant species can be very effective in different biomonitoring procedures and also in the phytoremediation procedure known as phytostabilization. At the same time, it was obvious that even in aggressive circumstances its fruit was protected from some serious contamination and kept pretty safe for consummation.

The effect of multiple contamination of soil on LMW and MMW PAHs accumulation in the roots of Rubus fruticosus L. naturally growing near The Copper Mining and Smelting Complex Bor (East Serbia).

Samples of roots and spatial soils of native Rubus fruticosus L. were collected from the spots positioned at different distances from the copper smelter and city heating plants in the industrial zone of the town of Bor (Serbia) and subjected to chemical analyses in order to determine the content of several heavy metals, and 15 priority polycyclic aromatic hydrocarbons (PAHs). In this study, the results for 9 low and medium molecular weight PAHs (LMW and MMW PAHs) are represented and processed using the calculation of bio-concentration factors and statistical methods such as hierarchical cluster analysis and Pearson's correlation study with the aim of investigating the plant capabilities for their uptake from the soil and later accumulation into the root tissue, under the hostile circumstances of multiple contamination. The obtained data revealed different accumulation rates for the investigated PAHs and showed that in several cases, the contents of root PAHs were under the strong influence of present contaminants such as soil copper and some soil PAHs, indicating at the same time that R. fruticosus can regulate the processes of LMW and MMW PAHs extraction/accumulation using different mechanisms, depending on the existing environmental circumstances. The used mechanisms could be exploited in phytoremediation methods based not only on the extraction and concentration of PAHs in plant roots but also on PAH degradation or stabilization in the soil. Also, the results of this study confirmed that, except in the case of naphthalene and fluoranthene, there was no PAH pollution, which originated solely from the industrial zone.

Chemometric evaluation of trace metals in Prunus persica L. Batech and Malus domestica from Minicevo (Serbia).

The samples of spatial soils and different organs of Prunus persica L. Batech and Malus domestica were analyzed by methods such as inductively coupled plasma optical emission spectroscopy (ICP-OES), Hierarchical Cluster Analysis (HCA), One-way ANOVA, and calculation of biological accumulation factors (BAFs) with the aim of investigating whether these methods may help in the evaluation of trace metals in plants, as well as in the estimation of plant bioaccumulation potentials. ICP-OES provided accurate data on present concentrations of Cu, Zn, Pb, As, Cd, and Ni which showed that most concentrations were in normal ranges, except in some cases for Cu, Zn, and As. HCA illustrated nicely various specifics in the distribution of metals in both investigated systems plant-soil. One-way ANOVA pointed successfully on the existing statistical differences between metal concentrations. Calculated BAFs showed that both plants had very low accumulation rates for all elements; they acted as metal excluders.

Plant parts of the apple tree (Malus spp.) as possible indicators of heavy metal pollution.

The content of Cu, Zn, Pb, As, Cd, and Ni was determined by ICP-OES in spatial soil and parts (root, branches, leaves, and fruit) of the apple tree (Malus spp.) from polluted sites near The Mining and Smelting Complex Bor (Serbia). The aim of this study was to examine if the obtained results can be used for biomonitoring purposes. Data recorded in plant parts, especially leaves, gave very useful information about the environmental state of the Bor region. Conveniently, these data described well the capability of investigated plant species to assimilate and tolerate severely high concentrations of heavy metals in its tissues, which may further allow the possibility for utilization of the apple tree for phytostabilization.

Elemental composition of edible nuts: fast optimization and validation procedure of an ICP-OES method.

BACKGROUND: An inductively coupled plasma-optical emission spectrometry method for the speedy simultaneous detection of 19 elements in edible nuts (walnuts: Juglans nigra; almonds: Prunus dulcis; hazelnuts: Corylus avellana; Brazil nuts: Bertholletia excelsa; cashews: Anacardium occidentalle; pistachios: Pistacia vera; and peanuts: Arachis hypogaea) available on the Serbian markets, was optimized and validated through the selection of instrumental parameters and analytical lines free from spectral interference and with the lowest matrix effects. RESULTS: The analysed macro-elements were present in the following descending order: Na > Mg > Ca > K. Of all the trace elements, the tested samples showed the highest content of Fe. The micro-element Se was detected in all the samples of nuts. The toxic elements As, Cd and Pb were either not detected or the contents were below the limit of detection. One-way analysis of variance, Student's t-test, Tukey's HSD post hoc test and hierarchical agglomerative cluster analysis were applied in the statistical analysis of the results. CONCLUSION: Based on the detected content of analysed elements it can be concluded that nuts may be a good additional source of minerals as micronutrients.

Assessment of the quality of polluted areas based on the content of heavy metals in different organs of the grapevine (Vitis vinifera) cv Tamjanika.

In this study, the samples of the spatial soil and organs of the grapevine (Vitis vinifera) cultivar Tamjanika were collected from the selected zones near the Mining and Smelting Complex Bor (East Serbia). They were analyzed by ICP-OES to determine the content of Cu, Zn, Pb, As, Cd, and Ni with the aim of ascertaining if these data may help in the assessment and improvement of the quality of environment in polluted areas such as Bor and its surrounding area. The results obtained from the calculated biological and enrichment factors, as well as from the Pearson correlation study and hierarchical cluster analysis confirmed that very useful information is recorded in plant organs: root, stem, leaves, and fruit. Yet, when the atmospheric pollution is the sphere of interest, the most informative data are found in unwashed leaves. The results of this study indicated also that the investigated plant species has some highly effective strategies involved in tolerance to the stress induced by heavy metals, which makes it an excellent candidate for phytostabilization purposes. Planting of this grapevine cultivar can be recommended in all areas that are severely polluted with heavy metals.

Bioaccumulation of arsenic and cadmium in birch and lime from the Bor region.

Copper production in the Bor region (east Serbia) during the last 100 years has influenced the quality of soil, water, and air. This pollution has endangered not only the biotope but all living organisms, including humans. Contents of arsenic (As) and cadmium (Cd) were analyzed in Betula sp. (birch) and Tillia sp. (lime) within the Bor region with the aim to investigate the bioaccumulation of these highly toxic, nonessential trace elements in selected plants, which may be important for biomonitoring and bioremediation purposes. The results of statistical data analysis showed that several factors influenced the bioaccumulation of trace elements in the examined plants, of which soil pH, soil content, and mechanism of accumulation were the main factors. The greatest As and Cd concentrations were found in plant material from the Bor center sampling site in the urban/industrial zone, which is in close proximity to the pollution source, due to the greatest metal concentrations in soil and the lowest soil pH. The low values of biological accumulation coefficients (bioconcentration factor <1, mobility ratio <1) pointed to a low rate of uptake and accumulation of As and Cd in lime and birch. Trace elements showed different patterns of behavior and accumulation in the trees. Lime showed a high ability of assimilation through leaves, whereas birch showed a better potential to express a linear correlation between concentrations in plant parts and soil.

Heavy metal content in different types of smoked meat in Serbia.

Concentrations of Fe, Cu, Ni, Cr, Pb, Mn, Zn and Cd in pork, beef, turkey and chicken samples were determined using inductively coupled plasma-optical emission spectrometry (ICP-OES). The mean concentration ranges in milligrams per 100 g of the studied metals in all samples were 0.6924-1.2154 for Fe, 0.6492-0.9831 for Cu, 0.0012-0.0027 for Pb, 0.041-0.0510 for Ni, 0.1186-0.1481 for Mn, 0.7257-5.2726 for Zn and 0.0042-0.0050 for Cd. The levels of analysed elements were in accordance with European standards for all metals except for manganese in all samples and for nickel in a certain number of samples. Zn level in beef was significantly higher compared to other samples, and Pb and Cd were found in concentrations well below the recommended daily intake.

Determination of diclofenac sodium in commercial pharmaceutical formulations and human control serum using a kinetic-spectrophotometric method.

A kinetic method for the determination of micro quantities of diclofenac sodium (DS) is described in this paper. The method is based on a ligand-exchange reaction. The reaction was followed spectrophotometrically by monitoring the rate of appearance of the cobalt diclofenac complex at 376 nm. The optimum operating conditions regarding reagent concentrations and temperature were established. The optimized conditions yielded a theoretical detection limit of 1.29 microg ml(-1) based on the 3S(b) criterion. The interference effects of certain drugs, foreign ions and amino acids upon the reaction rate were studied in order to assess the selectivity of the method. The developed procedure was successfully applied to the rapid determination of diclofenac sodium in commercial pharmaceutical preparations and human control serum. The unique features of this procedure are that determination can be carried out at room temperature and the analysis time is short. The newly developed method is simple, inexpensive, and efficient for use in the analysis of a large number of samples.

Determination of streptomycin in a pharmaceutical sample based on its degradation by hydrogen peroxide in the presence of copper(II).

The kinetics of streptomycin degradation by hydrogen peroxide at pH 7.4 was investigated. The reaction was catalyzed by traces of Cu(II) ions, and it was followed spectrophotometrically at 322 nm by applying the initial-rate method. The kinetic parameters of the reaction are reported, and a rate equation is suggested. From the dependence of the relative rate constants on the temperature, the activation energy was calculated to be 57.5 kJ/mol. Based on this reaction, a kinetic method for streptomycin determination is proposed. The calibration graph is linear in the ranges 1.94 - 15.48 microg/cm(3) and 0.15 - 1.94 microg/cm(3). The influence of foreign ions and molecules on the accuracy of the determinations was investigated. The proposed kinetic method has high selectivity and good sensitivity, and enabled to determine streptomycin in pharmaceutical samples.