Pulsed Laser Photo-Crosslinking of Gelatin Methacryloyl Hydrogels for the Controlled Delivery of Chlorpromazine to Combat Antimicrobial Resistance.

Hydrogels are ideal candidates for the sustained local administration of antimicrobial drugs because they have customizable physicochemical properties that allow drug release kinetics to be controlled and potentially address the issue of systemic side effects. Consequently, the purpose of this study was to use 266 nm-pulsed laser beams to photo-crosslink gelatin methacryloyl hydrogels using Irgacure 2959 as a photo-initiator to reduce the curing time and to have an online method to monitor the process, such as laser-induced fluorescence. Additionally, irradiated chlorpromazine was loaded into the hydrogels to obtain a drug delivery system with antimicrobial activity. These hydrogels were investigated by UV-Vis and FTIR absorption spectroscopy, scanning electron microscopy, and laser-induced fluorescence spectroscopy and their structural and morphological characteristics, swelling behavior, and drug release profile were obtained. As a result the morphology, swelling behavior, and drug release profile were influenced by both the energy of the laser beam and the exposure time. The optimal hydrogel was obtained after 1 min of laser irradiation for Irgacure 2959 at 0.05% w/v concentration and gelatin methacryloyl at 10% w/v concentration. The hydrogels loaded with irradiated chlorpromazine show significant antimicrobial activity against Staphylococcus aureus and MRSA bacteria and a non-cytotoxic effect against L929 fibroblast cell lines.

Implant Surfaces Containing Bioglasses and Ciprofloxacin as Platforms for Bone Repair and Improved Resistance to Microbial Colonization.

Coatings are an attractive and challenging selection for improving the bioperformance of metallic devices. Composite materials based on bioglass/antibiotic/polymer are herein proposed as multifunctional thin films for hard tissue implants. We deposited a thin layer of the polymeric material by matrix-assisted pulsed laser evaporation-MAPLE onto Ti substrates. A second layer consisting of bioglass + antibiotic was applied by MAPLE onto the initial thin film. The antimicrobial activity of MAPLE-deposited thin films was evaluated on Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, and Pseudomonas aeruginosa standard strains. The biocompatibility of obtained thin films was assessed on mouse osteoblast-like cells. The results of our study revealed that the laser-deposited coatings are biocompatible and resistant to microbial colonization and biofilm formation. Accordingly, they can be considered viable candidates for biomedical devices and contact surfaces that would otherwise be amenable to contact transmission.

Nitrites Detection with Sensors Processed via Matrix-Assisted Pulsed Laser Evaporation.

This work is focused on the application of a laser-based technique, i.e., matrix-assisted pulsed laser evaporation (MAPLE) for the development of electrochemical sensors aimed at the detection of nitrites in water. Commercial carbon-based screen-printed electrodes were modified by MAPLE via the application of a newly developed composite coating with different concentrations of carbon nanotubes (CNTs), chitosan, and iron (II) phthalocyanine (C32H16FeN8). The performance of the newly fabricated composite coatings was evaluated both by investigating the morphology and surface chemistry of the coating, and by determining the electro-catalytic oxidation properties of nitrite with bare and modified commercial carbon-based screen-printed electrode. It was found that the combined effect of CNTs with chitosan and C32H16FeN8 significantly improves the electrochemical response towards the oxidation of nitrite. In addition, the MAPLE modified screen-printed electrodes have a limit of detection of 0.12 µM, which make them extremely useful for the detection of nitrite traces.

Stability Studies of UV Laser Irradiated Promethazine and Thioridazine after Exposure to Hypergravity Conditions.

Pharmaceuticals carried into space are subjected to different gravitational conditions. Hypergravity is encountered in the first stage, during spacecraft launching. The stability of medicines represents a critical element of space missions, especially long-duration ones. Therefore, stability studies should be envisaged before the implementation of drugs for future deep space travel, where the available pharmaceuticals would be limited and restocking from Earth would be impossible. Multipurpose drugs should be proposed for this reason, such as phenothiazine derivatives that can be transformed by optical methods into antimicrobial agents. Within this preliminary study, promethazine and thioridazine aqueous solutions were exposed to UV laser radiation that modified their structures and generated a mixture of photoproducts efficient against particular bacteria. Subsequently, they were subjected to 20 g in the European Space Agency's Large Diameter Centrifuge. The aim was to evaluate the impact of hypergravity on the physico-chemical and spectral properties of unirradiated and laser-irradiated medicine solutions through pH assay, UV-Vis/FTIR absorption spectroscopy, and thin-layer chromatography. The results revealed no substantial alterations in centrifuged samples when compared to uncentrifuged ones. Due to their stability after high-g episodes, laser-exposed phenothiazines could be considered for future space missions.

Spectroscopic Investigations of Porphyrin-TiO2 Nanoparticles Complexes.

This study presents the spectral characterization of TiO2 nanoparticles (NPs) functionalized with three porphyrin derivatives: 5,10,15,20-(Tetra-4-aminophenyl) porphyrin (TAPP), 5,10,15,20-(Tetra-4-methoxyphenyl) porphyrin (TMPP), and 5,10,15,20-(Tetra-4-carboxyphenyl) porphyrin (TCPP). UV-Vis absorption and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) spectroscopic studies of these porphyrins and their complexes with TiO2 NPs were performed. In addition, the efficiency of singlet oxygen generation, the key species in photodynamic therapy, was investigated. UV-Vis absorption spectra of the NPs complexes showed the characteristic bands of porphyrins. These allowed us to determine the loaded porphyrins on TiO2 NPs functionalized with porphyrins. FTIR-ATR revealed the formation of porphyrin-TiO2 complexes, suggesting that porphyrin adsorption on TiO2 may involve the pyrroles in the porphyrin ring, or the radicals of the porphyrin derivative. The quantum yield for singlet oxygen generation by the studied porphyrin complexes with TiO2 was higher compared to bare porphyrins for TAPP and TMPP, while for the TCPP-TiO2 NPs complex, a decrease was observed, but still maintained a good efficiency. The TiO2 NPs conjugates can be promising candidates to be tested in photodynamic therapy in vitro assays.

Low Blue Dose Photodynamic Therapy with Porphyrin-Iron Oxide Nanoparticles Complexes: In Vitro Study on Human Melanoma Cells.

The purpose of this study was to investigate the effectiveness in photodynamic therapy of iron oxide nanoparticles (γ-Fe2O3 NPs), synthesized by laser pyrolysis technique, functionalized with 5,10,15,20-(Tetra-4-sulfonatophenyl) porphyrin tetraammonium (TPPS) on human cutaneous melanoma cells, after only 1 min blue light exposure. The efficiency of porphyrin loading on the iron oxide nanocarriers was estimated by using absorption and FTIR spectroscopy. The singlet oxygen yield was determined via transient characteristics of singlet oxygen phosphorescence at 1270 nm both for porphyrin functionalized nanoparticles and rose bengal used as standard. The irradiation was performed with a LED (405 nm, 1 mW/cm2) for 1 min after melanoma cells were treated with TPPS functionalized iron oxide nanoparticles (γ-Fe2O3 NPs_TPPS) and incubated for 24 h. Biological tests revealed a high anticancer effect of γ-Fe2O3 NPs_TPPS complexes indi-cated by the inhibition of tumor cell proliferation, reduction of cell adhesion, and induction of cell death through ROS generated by TPPS under light exposure. The biological assays were combined with the pharmacokinetic prediction of the porphyrin.

High performance thin layer chromatography-densitometry method based on picosecond laser-induced fluorescence for the analysis of thioridazine and its photoproducts.

A densitometry method based on steady-state and time-resolved fluorescence assessments for thioridazine and its photoproducts applied on HPTLC plates has been developed. The excitation source was a picosecond diode laser emitting at 375 nm. This method was used for the analysis of the photoproducts resulted from thioridazine irradiation with 266 nm nanosecond-pulsed laser. The validation of the developed method was performed for thioridazine in terms of linearity, precision, limits of detection and quantification. Furthermore, analysis of the photoproducts of irradiated thioridazine was performed by steady-state and time-resolved fluorescence. The fluorescence spectra and fluorescence lifetime of each photoproduct were obtained and the horizontal chromatograms of fluorescence maxima were generated.

Optical Characterization of Ciprofloxacin Photolytic Degradation by UV-Pulsed Laser Radiation.

Ciprofloxacin is one of the most prescribed antibiotics in treating bacterial infections, becoming an important pollutant of the wastewaters. Moreover, ciprofloxacin is hard to be destroyed by conventional water treatment processes; therefore, efficient treatments to destroy it are needed in water decontamination. This study offers insights into the performance of 266 nm laser beams on the photodegradation of ciprofloxacin. An Nd:YAG laser was used that emitted 266 nm at an energy of 6.5 mJ (power of 65 mW) and ciprofloxacin water solutions were irradiated up to 240 min. The irradiated solutions were investigated by UV-Vis and FTIR absorption spectroscopy, pH assay, and laser-induced fluorescence. An HPTLC densitometer was used to characterize the laser-induced fluorescence and fluorescence lifetime of photodegradation products. The UV-Vis absorption, FTIR, and laser-induced fluorescence spectra showed the degradation of ciprofloxacin. Moreover, HPTLC densitometry offered the fluorescence and fluorescence lifetime of ciprofloxacin and its three photoproducts as well as their relative quantification. From the FTIR spectra, the molecular structure of two out of three photoproducts was proposed. In conclusion, the laser irradiation method provided the efficient photodegradation of ciprofloxacin, whereas the analytical techniques offered the proper means to monitor the process and detect the obtained photoproducts.

Anti-staphylococcal activity and mode of action of thioridazine photoproducts.

Antibiotic resistance became an increasing risk for population health threatening our ability to fight infectious diseases. The objective of this study was to evaluate the activity of laser irradiated thioridazine (TZ) against clinically-relevant bacteria in view to fight antibiotic resistance. TZ in ultrapure water solutions was irradiated (1-240 min) with 266 nm pulsed laser radiation. Irradiated solutions were characterized by UV-Vis and FTIR absorption spectroscopy, thin layer chromatography, laser-induced fluorescence, and dynamic surface tension measurements. Molecular docking studies were made to evaluate the molecular mechanisms of photoproducts action against Staphylococcus aureus and MRSA. More general, solutions were evaluated for their antimicrobial and efflux inhibitory activity against a panel of bacteria of clinical relevance. We observed an enhanced antimicrobial activity of TZ photoproducts against Gram-positive bacteria. This was higher than ciprofloxacin effects for methicillin- and ciprofloxacin-resistant Staphylococcus aureus. Molecular docking showed the Penicillin-binding proteins PBP3 and PBP2a inhibition by sulforidazine as a possible mechanism of action against Staphylococcus aureus and MRSA strains, respectively. Irradiated TZ reveals possible advantages in the treatment of infectious diseases produced by antibiotic-resistant Gram-positive bacteria. TZ repurposing and its photoproducts, obtained by laser irradiation, show accelerated and low-costs of development if compared to chemical synthesis.

Spectroscopic Characterization of Emulsions Generated with a New Laser-Assisted Device.

This paper presents a spectroscopic study of emulsions generated with a laser-assisted device. Fourier transform infrared (FTIR), Raman and UV-Vis-NIR reflectance spectra of emulsions, recorded before and after exposure to laser radiation were used to characterize the effect of laser irradiation. The paper also presents a comparison between the calculated IR spectra and the experimental FTIR spectra of an emulsion's components. FTIR measurements allowed the identification of absorption bands specific to each of the emulsions' components. Moreover, it enabled the observation of destabilization of the emulsion in real-time. Raman spectroscopy allowed the observation of the modifications at a molecular level, by identifying the vibrations of the representative functional groups and the polymerization of sodium tetradecyl sulfate (STS) molecules by analyzing the evolution of the carbonyl band. UV-Vis-NIR reflectance spectra of emulsions before and after exposure to laser radiation showed that the physical characteristics of the emulsions changed during irradiation-the dimensions of the droplets decreased, leading to an emulsion with a better time stability. These results proved that the employed spectroscopy techniques were powerful tools in emulsion analysis.

Functional Bioglass-Biopolymer Double Nanostructure for Natural Antimicrobial Drug Extracts Delivery.

Aseptic loosening and periprosthetic infections are the main causes of implant failure. Strategies to mitigate this drawback are therefore mandatory to avoid primary and revision replacement surgeries. A functional bioapatite-biopolymer double nanostructure fabricated by matrix-assisted pulsed laser evaporation to prevent infection of orthopedic and dental implants could promote osseointegration and ensure controlled delivery of natural antimicrobial drugs. The synthesized nanostructure consists of two overlapping layers, the lower from a biocompatible polymer for anticorrosive protection, and the upper of bioactive glass incorporating antimicrobial plant extract, acting as a potential drug delivery system. Morphology, composition, adherence, ability for drug delivery and biological properties (cytotoxicity and antimicrobial effect) were studied. Structures proved compact and stable, conserving a remarkable drug delivery ability for more than 21 days, i.e., enough to ensure long-term microbes' eradication.

Laser induced autofluorescence lifetime to identify larynx squamous cell carcinoma: Short series ex vivo study.

Laser induced autofluorescence (LIAF) lifetime is useful to distinguish between normal laryngeal tissues and squamous cell carcinoma (SCC) based on variations of their biochemical composition and structure alterations. LIAF was collected from samples constituted by pairs of normal and malignant tissue, which were excised from three patients. Exclusion criteria for samples harvest were: (i) macroscopic changes of normal vocal cord observed during surgery; (ii) previous surgical intervention on vocal cord, (iii) patients treated only with chemotherapy or radiotherapy for carcinoma. Inclusion conditions: men, aged 57-68, non-smokers. A pulsed laser diode excited LIAF at 375 nm and 31 MHz repetition rate; beam full-time width at half-maximum was 87 ps at an average power of 0.49 mW. Mean LIAF lifetime for normal tissues was (3.75 ± 0.49) ns and for malignant (4.37 ± 0.85) ns: it is longer in malignant than in normal tissue. Variance analysis made with Fisher's test has shown no significant difference between patients for normal tissues; the same was true for malignant. Though, when malignant tissue was compared to normal for the same patients as well as between patients, a significant difference (significance level of 5%) was evidenced. Time-resolved LIAF may allow better differentiation between normal and malignant tissues in patients diagnosed with larynx SCC.

In vitro antimicrobial efficacy of laser exposed chlorpromazine against Gram-positive bacteria in planktonic and biofilm growth state.

Aqueous chlorpromazine solutions exposed to 266 nm generated as fourth harmonic of Nd:YAG pulsed laser along time intervals from 1 min to 240 min were investigated for their antimicrobial activity against planktonic and adherent Gram-positive bacterial strains. Qualitative and quantitative assays based on microbiological methods and flow cytometry assays were performed to establish the minimum inhibitory and minimum biofilm eradication concentrations and to reveal some of the possible mechanisms of antimicrobial activity. Optimal irradiation conditions and combinations of photoproducts for achieving the best antimicrobial and antibiofilm effects are suggested. It was confirmed that chlorpromazine solutions irradiated for 15 min and 30 min have the best antimicrobial and antibiofilm activity against Staphylococcus aureus ATCC 6538, methicillin susceptible Staphylococcus aureus, methicillin resistant Staphylococcus aureus, Enterococcus faecium 17-VAR, Enterococcus faecalis 2921, and Bacillus subtilis 6633. Flow cytometry revealed that two of the possible mechanisms of the antimicrobial activity of irradiated chlorpromazine are the inhibition of efflux pumps activity and induction of cellular membrane lesions.

Case series about ex vivo identification of squamous cell carcinomas by laser-induced autofluorescence and Fourier transform infrared spectroscopy.

An ex vivo case series aimed at identification of normal laryngeal tissue from laryngeal epidermoid squamous keratinized carcinoma by measuring laser-induced autofluorescence (LIAF) and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectra is presented. The case series results were obtained for paired samples extracted from three patients (exclusion: macroscopic changes of normal vocal cord observed during surgery; surgical intervention on vocal cord, treated only with chemotherapy or radiotherapy for carcinoma; inclusion: men, aged 57-68, non-smokers). For LIAF analysis, a 375-nm picosecond pulsed laser diode with 31 MHz pulse repetition rate, 100 ps full-time width at half-maximum, and average power 0.49 µW was used. LIAF and FTIR-ATR spectra show noticeable differences between normal and malignant tissues. LIAF spectra differed in shape of emitted band, peak position, and band relative intensity of the two kinds of samples, evidencing hypsochromic shift and mean fluorescence intensity decrease of (75.42 ± 3)% in malignant tissue with respect to the normal one. The lack of 1745 cm-1 band in FTIR-ATR spectra for malignant tissues could be considered an important indicative of the presence of this kind of tissue; moreover, it resulted a greater contribution of lipids and proteins in normal tissue and of collagen in malignant tissue. Penetration depth of the evanescent wave was about 2 µm at an angle of 42°. The two spectroscopic methods are complementary, are applicable for real-time measurements, and may enhance cancer detection and diagnostics. Results presented in this study evidence the potential of the two methods for future in vivo studies.

Chlorpromazine transformation by exposure to ultraviolet laser beams in droplet and bulk.

Multiple drug resistance requires a flexible approach to find medicines able to overcome it. One method could be the exposure of existing medicines to ultraviolet laser beams to generate photoproducts that are efficient against bacteria and/or malignant tumors. This can be done in droplets or bulk volumes. In the present work are reported results about the interaction of 266nm and 355nm pulsed laser radiation with microdroplets and bulk containing solutions of 10mg/ml Chlorpromazine Hydrochloride (CPZ) in ultrapure water. The irradiation effects on CPZ solution at larger time intervals (more than 30min) are similar in terms of generated photoproducts if the two ultraviolet wavelengths are utilized. The understanding of the CPZ parent compound transformation may be better evidenced, as shown in this paper, if studies at shorter than 30minute exposure times are made coupled with properly chosen volumes to irradiate. We show that at exposure to a 355nm laser beam faster molecular modifications of CPZ in ultrapure water solution are produced than at irradiation with 266nm, for both microdroplet and bulk volume samples. These effects are evidenced by thin layer chromatography technique and laser induced fluorescence measurements.

Toxicity study in blood and tumor cells of laser produced medicines for application in fabrics.

Phenothiazine derivatives are non-antibiotics with antimicrobial, fungistatic and fungicidal effects. We exposed to a high energy UV laser beam phenothiazines solutions in water at 20mg/mL concentration to increase antibacterial activity of resulting mixtures. Compared to previous results obtained on bacteria, more research is needed about UV laser irradiated phenothiazines applications on cancer cell cultures to evidence possible anticancerous properties. Evaluation of the safety of the newly obtained photoproducts in view of use on humans is also needed. Due to expensive animal testing in toxicology and pressure from general public and governments to develop alternatives to in vivo testing, in vitro cell-based models are attractive for preliminary testing of new materials. Cytotoxicity screening reported here shows that laser irradiated (4h exposure time length) chlorpromazine and promazine are more efficient against some cell cultures. Interaction of laser irradiated phenothiazines with fabrics show that promethazine and chlorpromazine have improved wetting properties. Correlation of these two groups of properties shows that chlorpromazine appears to be more recommended for applications on tissues using fabrics as transport vectors. The reported results concern stability study of phenothiazines water solutions to know the time limits within which they are stable and may be used.