Zr-Based MOF-545 Metal-Organic Framework Loaded with Highly Dispersed Small Size Ni Nanoparticles for CO2 Methanation.

We report the use of Zr-based metal-organic frameworks (MOFs) MOF-545 and MOF-545(Cu) as supports to prepare catalysts with uniformly and highly dispersed Ni nanoparticles (NPs) for CO2 hydrogenation into CH4. In the first step, we studied the MOF support under catalytic conditions using operando diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, ex situ characterizations (PXRD, XPS, TEM, and EDX-element mapping), and DFT calculations. We showed that the high-temperature conditions undoubtedly confer a potential for catalytic functionality to the solids toward CH4 production, while no role of the Cu could be evidenced. The MOF was shown to be transformed into a catalytically active material, amorphized but still structured with dehydroxylated Zr-oxoclusters, in line with DFT calculations. In the second step, Ni@MOF-545 catalysts were prepared using either impregnation (IM) or double solvent (DS) methods, followed by a dry reduction (R) route under H2 to immobilize Ni NPs. The highest catalytic activity was obtained with the Ni@MOF-545 DS R catalyst (595 mmolCH4 gNi-1 h-1) with 100% CH4 selectivity and 60% CO2 conversion after ∼3 h. The higher catalytic activity of Ni@MOF-545 DS R is a result of much smaller (∼5 nm) and better dispersed Ni NPs than in the IM sample (20-40 nm), the latter exhibiting sintering. The advantages of the encapsulation of Ni NPs by the DS method and of the use of a MOF-545-based support are discussed, highlighting the interest of designing yet-unexplored Zr-based MOFs loaded with Ni NPs for CO2 hydrogenation.

Silver and Copper Nitride Cooperate for CO Electroreduction to Propanol.

The need of carbon sources for the chemical industry, alternative to fossil sources, has pointed to CO2 as a possible feedstock. While CO2 electroreduction (CO2 R) allows production of interesting organic compounds, it suffers from large carbon losses, mainly due to carbonate formation. This is why, quite recently, tandem CO2 R, a two-step process, with first CO2 R to CO using a solid oxide electrolysis cell followed by CO electroreduction (COR), has been considered, since no carbon is lost as carbonate in either step. Here we report a novel copper-based catalyst, silver-doped copper nitride, with record selectivity for formation of propanol (Faradaic efficiency: 45 %), an industrially relevant compound, from CO electroreduction in gas-fed flow cells. Selective propanol formation occurs at metallic copper atoms derived from copper nitride and is promoted by silver doping as shown experimentally and computationally. In addition, the selectivity for C2+ liquid products (Faradaic efficiency: 80 %) is among the highest reported so far. These findings open new perspectives regarding the design of catalysts for production of C3 compounds from CO2 .

Selective Ethylene Production from CO2 and CO Reduction via Engineering Membrane Electrode Assembly with Porous Dendritic Copper Oxide.

Gas-fed zero-gap electrolyzers have recently emerged as attractive systems for limiting ohmic losses and costs associated with electrolytes and for optimizing energy efficiencies. Here, we report that using a dendritic Cu oxide (D-CuO) material deposited on a gas diffusion layer as the cathode of a gas-fed zero-gap membrane electrode assembly (MEA) system results in a very selective conversion of CO to ethylene. More specifically, CO reduction yielded ethylene with an FE up to 68% at 100-125 mA·cm-2 with H2 as the only other gaseous product and the electrolysis could be carried out for several hours with good stability. Ethylene was also the major product during CO2 electrolysis (FE = 41%) at 125-150 mA·cm-2, reflecting the high selectivity of D-CuO for ethylene production. Such systems are relevant for tandem CO2 electroreduction processes, allowing energy efficiencies above 30%.

Coupling Electrocatalytic CO2 Reduction with Thermocatalysis Enables the Formation of a Lactone Monomer.

Carbonylation reactions that generate high-value chemical feedstocks are integral to the formation of many industrially significant compounds. However, these processes require the use of CO, which is invariably derived from fossil-fuel-reforming reactions. CO may also be generated through the electroreduction of CO2 , but the coupling of these two processes is yet to be considered. Merging electrocatalytic reduction of CO2 to CO with thermocatalytic use of CO would expand the range of the chemicals produced from CO2 . This work describes the development of a system coupling a high-pressure CO2 electrolytic cell containing a bimetallic ZnAg catalyst at the cathode for production of CO with a reactor with a Faradaic efficiency of >90 % where high pressure CO is used for carbonylating propylene oxide into ß-butyrolactone by thermal catalysis, the latter step having a reaction yield above 80 %. Although the production of monomers and polymers from CO2 is currently limited to organic carbonates, this strategy opens up the access to lactones from CO2 , for the formation of polyesters.

Toehold-mediated DNA displacement-based surface-enhanced Raman scattering DNA sensor utilizing an Au-Ag bimetallic nanodendrite substrate.

A simple and sensitive surface enhanced Raman scattering (SERS)-based DNA sensor that utilizes the toehold-mediated DNA displacement reaction as a target-capturing scheme has been demonstrated. For a SERS substrate, Au-Ag bimetallic nanodendrites were electrochemically synthesized and used as a sensor platform. The incorporation of both Ag and Au was employed to simultaneously secure high sensitivity and stability of the substrate. An optimal composition of Ag and Au that satisfied these needs was determined. A double-strand composed of 'a probe DNA (pDNA)' complementary to 'a target DNA (tDNA)' and 'an indicator DNA tagged with a Raman reporter (iDNA)' was conjugated on the substrate. The conjugation made the reporter molecule close to the surface and induced generation of the Raman signal. The tDNA released the pre-hybridized iDNA from the pDNA via toehold-mediated displacement, and the displacement of the iDNA resulted in the decrease of Raman intensity. The variation of percent intensity change was sensitive and linear in the concentration range from 200fM to 20nM, and the achieved limit of detection (LOD) was 96.3fM, superior to those reported in previous studies that adopted different signal taggings based on such as fluorescence and electrochemistry.

Label-free detection of aflatoxin M1 with electrochemical Fe3O4/polyaniline-based aptasensor.

The selective detection of ultratrace amounts of aflatoxin M1 (AFM1) is extremely important for food safety since it is the most toxic mycotoxin class that is allowed to be present on cow milk with strictly low regulatory levels. In this work, Fe3O4 incorporated polyaniline (Fe3O4/PANi) film has been polymerized on interdigitated electrode (IDE) as sensitive film for AFM1 electrochemical biosensor. The immobilized aptamers as an affinity capture reagent and magnetic nanoparticles for signal amplification element have been employed in the sensing platform. Label-free and direct detection of the aptamer-AFM1 on Fe3O4/PANi interface were performed via electrochemical signal change, acquired by cyclic and square wave voltammetries. With a simplified strategy, this electrochemical aptasensor shows a good sensitivity to AFM1 in the range of 6-60 ng·L(-1), with the detection limit of 1.98 ng·L(-1). The results open up the path for designing cost effective aptasensors for other biomedical applications.