RESUMO
In this study, a TiO2 material with nanoparticle size of about 10-20 nm, surface area of 109 m2 g-1 was synthesized using the microwave-assisted hydrothermal method. The chitosan/TiO2 film combined with cyclodextrin (chitosan-cyclodextrin/TiO2, CS-CD/TiO2NPs) helps significantly improve the mechanical properties and enhance the antibacterial activity of the polymer film. Furthermore, the content of TiO2 nanoparticles in CS-CD/TiO2NPs also affects the tensile strength, antibacterial activity, ripening rate, ethylene production rate, and water vapor permeability during food preservation of the CS-CD film that has been studied. The CS-CD/TiO2NPs film is effective against Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aereus) reaching over 99.5% after 15 min of contact. The preservation ability of avocados coated with CS-CD/TiO2NPs was evaluated through some physiological parameters of the avocados, such as sensory evaluation, weight loss, and hardness. The results show that the use of CS-CD/TiO2NPs films extends the preservation time of avocados up to 7 days under conditions of 30 °C and 80% relative humidity.
RESUMO
This study aims to synthesize a guest-host complex derived from rutin (Rut) and ß-cyclodextrin (ß-CD) (denoted as [Rutâß-CD]). The obtained substance was characterized by the FT-IR and DSC methods, signifying the formation of an inclusion complex between Rut and ß-CD. Complex formation increased the antioxidant activity of rutin corresponding to the decrease of EC50 values from 1.547 × 10-5 mol L-1 to 1.227 × 10-5 mol L-1 according to the DPPH free radical scavenging test. The rutin-ß-CD interaction energies were calculated in the vacuum and various solvents (e.g., water, ethanol, and dimethylsulfoxide) utilizing an accurate and broadly parametrized self-consistent tight-binding quantum chemical method (GFN2-xTB). The calculation results reveal the influence of solvent on the structural formation of the rutin-ß-CD complex. In both the vacuum and aqueous solution, rutin can enter into the small-sized empty cavity of ß-CD, albeit through different terminals, resulting in distinct preferential structures. The presence of organic solvents appears to reduce the interaction between rutin and ß-CD, with the interaction strength following the order: water > ethanol > dimethyl sulfoxide.
RESUMO
Cancer has emerged as a significant global health challenge, ranking as the second leading cause of death worldwide. Moreover, cancer patients frequently experience compromised immune systems, rendering them susceptible to bacterial infections. Combining anticancer and antibacterial properties in a single drug could lead to improved overall treatment outcomes and patient well-being. In this context, the present study focused on a series of hydrophilic naphthoimidazolium salts with donor groups (NI-R), aiming to create dual-functional agents with antibacterial and anticancer activities. Among these compounds, NI-TPA demonstrated notable antibacterial activity, particularly against drug-resistant bacteria, with MIC value of 7.8 µg mL-1. Furthermore, NI-TPA exhibited the most potent cytotoxicity against four different cancer cell lines, with an IC50 range of 0.67-2.01 µg mL-1. The observed high cytotoxicity of NI-TPA agreed with molecular docking and dynamic simulation studies targeting c-Met kinase protein. Additionally, NI-TPA stood out as the most promising candidate for two-photo excitation, fluorescence bioimaging, and localization in lysosomes. The study findings open new avenues for the design and development of imidazolium salts that could be employed in phototheranostic applications for cancer treatment and bacterial infections.
RESUMO
The development of heavy-atom-free photosensitizers (PSs) for photodynamic therapy (PDT) has encountered significant challenges in achieving simultaneous high fluorescence emission and reactive oxygen species (ROS) generation. Moreover, the limited water solubility of these PSs imposes further limitations on their biomedical applications. To overcome these obstacles, this study presents a molecular design strategy employing hydrophilic heavy-atom-free PSs based on imidazolium salts. The photophysical properties of these PSs were comprehensively investigated through a combination of experimental and theoretical analyses. Notably, among the synthesized PSs, the ethylcarbazole-naphthoimidazolium (NI-Cz) conjugate exhibited efficient fluorescence emission (ΦF = 0.22) and generation of singlet oxygen (ΦΔ = 0.49), even in highly aqueous environments. The performance of NI-Cz was validated through its application in fluorescence bioimaging and PDT treatment in HeLa cells. Furthermore, NI-Cz holds promise for two-photon excitation and type I ROS generation, nucleus localization, and selective activity against Gram-positive bacteria, thereby expanding its scope for the design of heavy-atom-free PSs and phototheranostic applications.
Assuntos
Fotoquimioterapia , Fármacos Fotossensibilizantes , Humanos , Fármacos Fotossensibilizantes/farmacologia , Fotoquimioterapia/métodos , Células HeLa , Espécies Reativas de Oxigênio , FluorescênciaRESUMO
In the course of finding new antifungal natural compounds against plant pathogens, the methanol extract of Desmodium triflorum was investigated phytochemically. From n-butanol-soluble fraction, seven compounds (1-7) were isolated and structurally elucidated. Of which, six compounds belong to flavone 6- or 8-C-glycoside class (1-6). Three major compounds (1-3) exhibited moderate in vitro antifungal activity against Sclerotium rolfsii, Fusarium oxysporum f. sp. cubense, and Phytophthora palmivora. Compound 1 (IC50 = 162.1 µg/mL) was most active against S. rolfsii in a dose-dependent manner. At 300 µg/mL, compounds 1 and 2 significantly inhibited P. palmivora, whereas compound 3 lacked effectiveness. In addition, the nanoemulsion of the methanol extract with a droplet size of 12.2 nm displayed an excellent inhibition against S. rolfsii and P. palmivora compared with the normal extract. The presence of 1 (0.846%) and 2 (0.759%) in the methanol extract may attribute to the antifungal activity of D. triflorum. These results proved the potential of D. triflorum and its C-glycoside flavonoids against phytopathogenic fungi for the first time. Besides, an enhancement in the effectiveness of nanoemulsion containing D. triflorum extract against the fungi was confirmed. The structural characteristics of 1 and 2 could be considered to develop new fungicidal substances in the future.
Assuntos
Fungicidas Industriais , Fusarium , Antifúngicos/farmacologia , Metanol , Fungos , Fungicidas Industriais/química , Extratos Vegetais/químicaRESUMO
Klebsiella pneumoniae, a member of the family Enterobacteriaceae, is a rod-shaped, Gram-negative bacterium, mainly found in the hospital environment and medical tools. It is the leading cause of nosocomial infection, characterized by bloodstream infection, wound site infection, urinary tract infection, and sepsis, mostly in older adults, newborn infants, and immunocompromised patients. This present study demonstrated a novel diagnostic method for K. pneumoniae detection based on the gold nanozyme activity for the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2. The nanozyme activity of AuNPs with staining enhancement was statistically three times higher than that of the bare AuNPs in solid absorption at 650 nm. Nano-ELISA with staining enhancement could detect as low as 102 CFUs/mL of K. pneumoniae concentration, as the cutoff value was determined to be 0.158, which boosted the sensitivity of the immunoreactions by up to 100-fold. The detection limit of our assays was 26.023 CFUs/mL, and the limit of quantification was 78.857 CFUs/mL. There was no cross-reaction against other bacteria, which proved the immunoassays' remarkable specificity for recognizing K. pneumoniae. Taken together, we successfully developed and optimized the highly sensitive and decently specific nano-ELISA strategy that might be applicable for detecting various other bacterial pathogens.
RESUMO
In this study, a UV-curable acrylate epoxy nanocomposite coating has been prepared by incorporation of ZnO-Ag hybrid nanoparticles. For this purpose, firstly ZnO-Ag hybrid nanoparticles were fabricated by a seed-mediated growth method. Then, these ZnO-Ag hybrid nanoparticles (2 wt%) were added into the UV-curable acrylate resin matrices. The photocuring process of nanocomposite was evaluated by various factors, such as the conversion of acrylate double bonds, pendulum hardness and gel fraction. Under the 4.8 s UV-exposure time for full crosslinking, the obtained data indicated that incorporation of ZnO-Ag nanohybrids into the coating matrix changed the crosslinking process of coating significantly. A mechanical teat indicated that the presence of nanohybrids in photocurable coating matrix enhanced its abrasion resistance from 98.7 to 131.6 L per mil (33.3%). The antibacterial test against E. coli over 7 h indicated that E. coli bacteria were killed totally by nanocomposite coating, whereas it was 2.6 × 104 CFU mL-1 for the neat coating without nanoparticles.
RESUMO
The SnO2/g-C3N4 composites were fabricated via an annealing mixture of g-C3N4 and SnO2, which were obtained from calcinating melamine and hydrothermal treatment of SnCl4 solution, respectively. The photocatalytic properties of g-C3N4/SnO2 were studied over the degradation of Rhodamine B (RhB) under visible light, which exhibits a significantly improved photocatalytic activity compared to the single components, g-C3N4 and SnO2. The enhancement in photocatalytic activity of SnO2/g-C3N4 could be described by the S-scheme pathway, in which the effective charge transfer between components is demonstrated toward the suppression in recombination of the photogenerated electron-hole pairs within redox potential conservation. Besides, a new criterion, photochemical space-time yield, was applied to evaluate the photocatalytic performance of our samples.
Assuntos
Elétrons , Luz , CatáliseRESUMO
Within moderate band gap, g-C3N4 and CdS are both promising visible light driven photocatalysts. However, their intrinsic high recombination rate of photo-induced electron-hole pairs along with the poor susceptibility in photocorrosion of CdS is main limitations hindering their practical application. In this study, the CdS/g-C3N4 composites with various weight ratios of CdS to g-C3N4 were solvothermal prepared from the dispersion of components, g-C3N4 and CdS, in ethanol. The physicochemical characterizations demonstrate the success in the fabrication of well-dispersed CdS nanoparticles in the g-C3N4 matrix. The enhanced photocatalytic activity of the g-C3N4/CdS composite over the degradation of methylene blue under visible light was ascribed to the effective photo-induced electron-hole separation via the step scheme (S-scheme) pathway in which the main contribution of high oxidative hydroxyl radicals (â¢OH) was demonstrated. Furthermore, via S-scheme model, we also clarify the depletion of photo-induced holes on CdS which is ascribed as the reason for improvement in resistance to photocorrosion of composites.
RESUMO
In this study, a simple and environment-friendly method has been successfully applied for the production of silver nanoparticles (AgNPs) using Poria cocos extract. The reaction time of 60 min, the temperature of 90 °C, and silver ion concentration of 2.0 mM were identified as the best condition for the PC-AgNPs fabrication. The XRD analysis confirmed a highly crystalline face-centered cubic structure of the biosynthesized material. The PC-AgNPs were presented separately in a spherical shape with an average crystal size of 20 nm, as endorsed by the TEM and FE-SEM measurements. The presence and crucial role of biomolecules in stabilizing the nanoparticles were elucidated by FTIR, EDX, and DLS techniques. The prepared biogenic nanoparticles were further applied for the reduction of 4-nitrophenol (4-NP) and colorimetric detection of Fe3+ ions. The study results proved that PC-AgNPs exhibited superior catalytic activity and reusability in the conversion of 4-NP by NaBH4. The complete reduction of 4-NP could be achieved in 10 min with the pseudo-first-order rate constant of 0.466 min-1, and no significant performance loss was found when the material was reused five times. The colorimetric probe based on PC-AgNPs displayed outstanding sensitivity and selectivity towards Fe3+ ions with a detection limit of 1.5 µM in a linear range of 0-250 µM. Additionally, the applicability of the developed assay was explored for testing Fe3+ ions in tap water. PC-AgNPs have a great potential for further applications as a promising catalyst for reducing nitrophenols and biosensors for the routine monitoring of Fe3+ in water.
Assuntos
Nanopartículas Metálicas , Wolfiporia , Compostos Férricos , Íons , Nitrofenóis , Extratos Vegetais , PrataRESUMO
Derivatives of 2-(2-indolyl)-cyclopenta[b]pyrrole-3,4-diones and pyrindino[1,2-a]indoles were synthesized by a new reaction of contraction of the o-quinone ring, and their structures were investigated by X-ray crystallography and nuclear magnetic resonance spectroscopy. The mechanisms of the reactions were suggested based on density functional theory calculations of the critical parts of the potential energy surfaces.
RESUMO
Photocatalytic hydrogen (H2) generation derived by water has been considered as a renewable energy to solve environmental problems and global energy crises. Thus, it is necessary to explore the most effective photocatalysts by using multi-cocatalysts, due to an intimate interaction between different components. Therefore, we already synthesized the TiO2/Ti3C2/g-C3N4 (TTC) photocatalyst from g-C3N4 and Ti3C2 MXene via a calcination technique, and applied this composite for H2 evolution. By making use of titanium atom from Ti3C2 MXene, titanium dioxide (TiO2) was in-body developed, which leads to form a close heterostructure between metallic material and semiconductors. Besides, g-C3N4 amorphous with highly surface area also contributes to harvest light irradiation during photocatalytic activity. The optimized TTC-450 heterostructure showed a super H2 generation efficiency than those of pure g-C3N4 and other samples. Besides, TTC-450 sample also exhibited great recyclability after 4 runs. The proposed mechanism illustrates the efficient movement of generated electrons in TTC system, which leads to high H2 evolution efficiency. Moreover, the obtained results consistently emphasize the TiO2/Ti3C2/g-C3N4 composite would be a unique material for H2 production and broaden applications of MXene materials.
Assuntos
Hidrogênio , Titânio , CatáliseRESUMO
In this work, a novel ternary Fe3O4/CuO@C composite was fabricated using iron-doped copper 1,4-benzenedicarboxylate metal-organic frameworks as a self-sacrificing template. The morphological, structural, and optical properties of the prepared composite were determined by various techniques, and its photocatalytic behavior was investigated for degradation of ciprofloxacin under visible light irradiation. The Fe3O4/CuO@C material presented a porous structure with a rough surface of about 4-20 µm, and was composed of the Fe3O4/CuO nanocomposite uniformly distributed on a carbon support. The band gap energy of the obtained composite was found to be 2.0 eV, which was nearly two times lower than that of Fe3O4@C and CuO@C. As a result, Fe3O4/CuO@C exhibited high photocatalytic activity, achieving a degradation efficiency of 98.5% after 120 min irradiation at the optimum conditions (a catalyst dosage of 0.5 g L-1, pH of 7, CIP concentration of 15 mg L-1). The mechanism of ciprofloxacin degradation by Fe3O4/CuO@C was elucidated with the main contribution of O2-and OH reactive radicals. The new composite catalyst could easily be recovered from the treated solution using an external magnetic field due to its superparamagnetic nature. Fe3O4/CuO@C also showed good reusability and stability. The overall results indicated that the synthesized composite has significant application potential for controlling the risk of antibiotics in wastewater.
Assuntos
Antibacterianos , Ciprofloxacina , Catálise , CobreRESUMO
In this manuscript, biological durability, cytotoxicity and MRI image contrast effect of chitosan modified magnetic nanoparticles were investigated. The result of durability study shows that the asprepared sample with average size of about 30 nm had a high stability under pH conditions in range of from 2 to 12 and at salt concentration in range of from 0 to 300 mM. The cytotoxicity testing indicates that the obtained Fe3O4@CS ferrofluid revealed a low cytotoxicity. After 48 h of test on the line of prostate tumor cells of Sarcoma 180, collected IC50 value was 178.5±22 (µg/ml), 7.5 to 27.9 times less cytotoxicity than that of reported ferromagnetic fluids. MRI data shows that the transverse relaxation rate (r2) of the ferrite nanoparticles was 130.32 (mM-1s-1), 2 and 1.44 times larger than that of the commercial products of Sinerem (AMI-227) and Ferumoxytol products, respectively. Invivo test in rabbit shows that the picture of body parts was clearly observed after the injection of the Fe3O4@CS ferrofluid. With these outstanding properties, this magnetic fluid based on the chitosan modified Fe3O4 nanoparticles had great potential for enhancing the image contrast in image diagnosis by MRI magnetic resonance imaging technique.
Assuntos
Quitosana , Nanopartículas de Magnetita , Nanopartículas , Animais , Quitosana/toxicidade , Meios de Contraste/toxicidade , Imageamento por Ressonância Magnética , Magnetismo , Nanopartículas de Magnetita/toxicidade , Imãs , Masculino , CoelhosRESUMO
Construction of hybrid three-dimensional (3D) hierarchical nanostructures via self-assembly of organic and inorganic compounds have recently attracted immense interest from scientists due to their unique properties and promise in a large range of applications. In this article, hybrid flower structures were successfully constructed by self-assembly an antibiotic, kanamycin, with Cu2+. The flower-like morphology was observed by scanning electron microscopy, to be approximately 4 µm in diameter and about 10 nm in thickness. FTIR spectroscopy and X-ray diffraction confirmed the antibiotic-inorganic hybrid structure was uniform composition, and showed crystallinity due to ordered self-assembly. The hybrid flowers showed high photocatalytic activity towards degradation of methyl blue during 240 minutes under visible light irradiation. A possible mechanism of photocatalytic activity was also proposed, that exposes the inherent advantages in using antibiotic-inorganic hybrid flowers as photocatalysts, where self-assembly can be used to generate active, high surface area structures for photodegradation of pollutants.
RESUMO
Polyoxymethylene (POM) is a semicrystalline thermoplastic that displays high tensile strength, thermal stability, and chemical durability. However, its widespread application is limited by its low elongation at break and thermal durability. In the present study, nanosilica (NS) and polylactic acid-grafted polyethylene glycol (PELA) were used as enhancement additives to improve the performance of POM homopolymer. Specifically, the POM/PELA/NS nanocomposites with a fixed NS content and varying PELA contents were prepared by a melt mixing method. The influence of the additives on the processability, and dynamic thermo-mechanical and tensile properties of the nanocomposites was evaluated by comparing the torque, mixing energy at melt state, storage modulus, shear stress, loss modulus, tan δ, tensile strength, elongation at break and thermal degradation of the nanocomposites. The results showed that the combined addition of NS and PELA enhanced the thermal stability, tensile strength, elongation at break and chemical stability of the POM/PELA/NS nanocomposites owing to the good compatibility between PELA and the POM matrix. Furthermore, the morphology, and UV and ozone durability of POM and the nanocomposites were assessed and discussed.
RESUMO
Magnetic activated carbon/chitosan composite (MACCS) beads from spent coffee grounds and shrimp shells were synthesized using green tea extract as a crosslinker. The adsorbent was then applied for removal of Ni(II) ions from aqueous solution after carefully characterizing it by various techniques (XRD, FTIR, FE-SEM, EDX, VSM and BET). The adsorption kinetics, isotherms, thermodynamics, the effects of key adsorption factors such as the pH value, initial Ni(II) concentration, contact time, adsorbent dose and temperature were investigated in detail. A possible adsorption mechanism was proposed. The results indicated that the adsorption process was thermodynamically favourable, spontaneous, endothermic, and was best described by the Langmuir isotherm and pseudo-second-order kinetic models. The MACCS beads with an optimum CS to MAC weight ratio estimated as 60:40 gave the maximum monolayer adsorption capacity for Ni(II) ions of 108.70 mgâ g-1 at 25°C, pH of 6, adsorbent dose of 1.0gâ L-1 and a contact time of 6â h. The recycling study confirmed that the adsorption ability of MACCS beads towards Ni(II) ions maintained well after five consecutive cycles with the removal efficiency greater than 86.25%. Eventually, the MACCS beads could be used as an environmentally-friendly and highly efficient adsorbent for removal of Ni(II) ions from wastewater due to the advantages of high efï¬ciency, rapid separation and good reusability.
Assuntos
Quitosana , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Café , Concentração de Íons de Hidrogênio , Íons , Cinética , Fenômenos Magnéticos , Extratos Vegetais , CháRESUMO
This paper describes the functionalization of poly(poly(ethylene glycol) methacrylate) (PPEGMA)-grafted CdTe (PPEGMA-g-CdTe) quantum dots (QDs) via surface-initiated reversible additionâ»fragmentation chain transfer (SI-RAFT) polymerization for immobilization of adenosine. Initially, the hydroxyl-coated CdTe QDs, synthesized using 2-mercaptoethanol (ME) as a capping agent, were coupled with a RAFT agent, S-benzyl S'-trimethoxysilylpropyltrithiocarbonate (BTPT), through a condensation reaction. Then, 2,2'-azobisisobutyronitrile (AIBN) was used to successfully initiate in situ RAFT polymerization to generate PPEGMA-g-CdTe nanocomposites. Adenosine-above-PPEGMA-grafted CdTe (Ado-i-PPEGMA-g-CdTe) hybrids were formed by the polymer shell, which had successfully undergone bioconjugation and postfunctionalization by adenosine (as a nucleoside). Fourier transform infrared (FT-IR) spectrophotometry, energy-dispersive X-ray (EDX) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy results indicated that a robust covalent bond was created between the organic PPEGMA part, cadmium telluride (CdTe) QDs, and the adenosine conjugate. The optical properties of the PPEGMA-g-CdTe and Ado-i-PPEGMA-g-CdTe hybrids were investigated by photoluminescence (PL) spectroscopy, and the results suggest that they have a great potential for application as optimal materials in biomedicine.
RESUMO
Pure and Au-decorated sub-micrometer ZnO spheres were successfully grown on glass substrates by simple chemical bath deposition and photoreduction methods. The analysis of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, energy-dispersive X-ray spectroscopy (EDS), UV-vis absorption, and photoluminescence (PL) spectra results were used to verify the incorporation of plasmonic Au nanoparticles (NPs) on the ZnO film. Time-resolved photoluminescence (TRPL) spectra indicated that a surface plasmonic effect exists with a fast rate of charge transfer from Au nanoparticles to the sub-micrometer ZnO sphere, which suggested the strong possibility of the use of the material for the design of efficient catalytic devices. The NO2 sensing ability of as-deposited ZnO films was investigated with different gas concentrations at an optimized sensing temperature of 120 °C. Surface decoration of plasmonic Au nanoparticles provided an enhanced sensitivity (141 times) with improved response (τRes = 9 s) and recovery time (τRec = 39 s). The enhanced gas sensing performance and photocatalytic degradation processes are suggested to be attributed to not only the surface plasmon resonance effect, but also due to a Schottky barrier between plasmonic Au and ZnO structures.
RESUMO
In this paper, we describe DNA electrochemical detection for genetically modified organism (GMO) based on multi-wall carbon nanotubes (MWCNTs)-doped polypyrrole (PPy). DNA hybridization is studied by quartz crystal microbalance (QCM) and electrochemical impedance spectroscopy (EIS). An increase in DNA complementary target concentration results in a decrease in the faradic charge transfer resistance (R(ct)) and signifying "signal-on" behavior of MWCNTs-PPy-DNA system. QCM and EIS data indicated that the electroanalytical MWCNTs-PPy films were highly sensitive (as low as 4pM of target can be detected with QCM technique). In principle, this system can be suitable not only for DNA but also for protein biosensor construction.