ß-TCP/S53P4 Scaffolds Obtained by Gel Casting: Synthesis, Properties, and Biomedical Applications.

The objective of this study was to investigate the osteogenic and antimicrobial effect of bioactive glass S53P4 incorporated into ß-tricalcium phosphate (ß-TCP) scaffolds in vitro and the bone neoformation in vivo. ß-TCP and ß-TCP/S53P4 scaffolds were prepared by the gel casting method. Samples were morphologically and physically characterized through X-ray diffraction (XRD) and scanning electron microscope (SEM). In vitro tests were performed using MG63 cells. American Type Culture Collection reference strains were used to determine the scaffold's antimicrobial potential. Defects were created in the tibia of New Zealand rabbits and filled with experimental scaffolds. The incorporation of S53P4 bioglass promotes significant changes in the crystalline phases formed and in the morphology of the surface of the scaffolds. The ß-TCP/S53P4 scaffolds did not demonstrate an in vitro cytotoxic effect, presented similar alkaline phosphatase activity, and induced a significantly higher protein amount when compared to ß-TCP. The expression of Itg ß1 in the ß-TCP scaffold was higher than in the ß-TCP/S53P4, and there was higher expression of Col-1 in the ß-TCP/S53P4 group. Higher bone formation and antimicrobial activity were observed in the ß-TCP/S53P4 group. The results confirm the osteogenic capacity of ß-TCP ceramics and suggest that, after bioactive glass S53P4 incorporation, it can prevent microbial infections, demonstrating to be an excellent biomaterial for application in bone tissue engineering.

Study of crystallization, microstructure and mechanical properties of lithium disilicate glass-ceramics as a function of the sintering temperature / Estudo da cristalização, microestrutura e propriedades mecânicas de uma vitrocerâmica de dissilicato de lítio em função da temperatura de sinterização

Objective: The purpose of the present study was to synthesize and characterize lithium disilicate glass-ceramics through the Li2O-SiO2system for determining the most satisfactory sintering parameter by evaluating the crystalline composition, microstructure and mechanical properties. Material and methods: The glass-ceramics were prepared from a glass precursor by means of the melting/cooling technique with a composition of 33.33 Li2O and 66.67 SiO2 (mol.%). The specimens were compressed by the uniaxial pressing technique and three different thermal treatments were used for sintering: 850 °C (Group 1), 900 °C (Group 2), and 950 °C (Group 3), which were determined based on the differential scanning calorimetry (DSC) result. The glass-ceramics were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Archimedes method, microhardness and biaxial flexural strength analyses. Results: The results regarding XRD predominantly showed lithium disilicate phase for all the heat treatments performed. Moreover, grains with a needle form were more predominantly observed in the SEM images for Group 3, as well as a higher densification and consequently higher mechanical properties. In contrast, Group 1 presented the lowest mechanical properties and densification, as well as the highest porosity. Conclusion: The present study demonstrated how extremely important it is to follow the heat treatment recommended by the manufacturers of ceramics, including time and temperature, which possess direct effects in the crystalline phase formation, as well as in the material's microstructure and mechanical properties (AU)

Objetivo: O presente estudo teve como objetivo sintetizar e caracterizar uma vitrocerâmica de dissilicato de lítio através do sistema Li2O-SiO2para determinar o parâmetro de sinterização mais satisfatório através da avaliação da composição cristalina, microestrutura e propriedades mecânicas. Material e Métodos: As vitrocerâmicas foram preparadas a partir de um vidro precursor pelo método fusão/resfriamento utilizando a composição de 33.33 Li2O e 66.67 SiO2 (mol.%). As amostras foram prensadas utilizando uma técnica de prensagem uniaxial e três tratamentos térmicos diferentes foram utilizadas para sinterização: 850 °C (Grupo 1), 900 °C (Grupo 2), e 950 °C (Grupo 3), que foram determinados através do resultado da análise diferencial de calorimetria. As vitrocerâmicas foram caracterizadas através das análises de difração de raios X (DRX), microscopia eletrônica de varredura (MEV), métodos de Arquimedes, microdureza e ensaio de flexão biaxial. Resultados: Os resultados de DRX mostraram predominantemente a fase de dissilicato de lítio para todos os tratamentos realizados. Além disso, grãos com forma agulhada foram mais predominantemente observados por MEV no grupo 3, assim como uma densificação maior e consequentemente valores maiores das propriedades mecânicas. Em contraste, o grupo 1 apresentou os menores valores de propriedades mecânicas e densificação, e também a maior porosidade. Conclusão: O presente estudo demonstrou como é extremamente importante seguir o tratamento térmico recomendado pelos fabricantes de cerâmica, incluindo tempo e temperatura, que possuem efeitos diretos na formação da fase cristalina, assim como na microestrutura do material e propriedades mecânicas. (AU)

Bioglass-based scaffolds coated with silver nanoparticles: Synthesis, processing and antimicrobial activity.

Over the past few years, several tridimensional synthetic bone grafts, known as scaffolds, are being developed to overcome the autologous grafts limitations. Among the materials used on the production of scaffolds, the 45S5 bioglass stands out due to its capacity of bonding to hard and soft tissues. Silver nanoparticles are well-known for their antimicrobial properties and their incorporation on the scaffold may promote its antimicrobial response, avoiding microorganism proliferation on the materials surface. This study proposes a simple way to coat 45S5 bioglass-based scaffolds with silver nanoparticles. The scaffolds were obtained by the sponge replication technique and the silver nanoparticles were incorporated by soaking under ultrasonic stirring. The antimicrobial activity of the scaffolds was analyzed against three different microbial strains: S. aureus, P. aeruginosa, and C. albicans. Due to the heat treatment during the scaffold production, the bioglass crystalized mainly in a sodium calcium silicate phase, forming a glass-ceramic scaffold. The silver nanoparticles were coated in a well-distributed manner throughout the scaffold, while avoiding their aggregation. The coated scaffold inhibited the growth of all the analyzed microorganism. Therefore, the use of ultrasonic stirring to coat the bioglass scaffold with silver nanoparticles showed to be an efficient way to promote its antimicrobial response.

Analysis of indicators of osteogenesis, cytotoxicity and genotoxicity of an experimental ß-TCP compared to other bone substitutes / Análise dos indicadores da osteogênese, citotoxicidade e genotoxicidade de um ß-TCP experimental comparado a outros substitutos ósseos

The aim of this study was to evaluate the indicators of osteogenesis, cytotoxicity and genotoxicity of an experimental beta tri-calcium phosphate (experimental ß-TCP) compared with two other bone substitutes: bovine hydroxyapatite (HA) (Bio-Oss® - Geistlich) and beta tri-calcium phosphate (ß-TCP - Bionnovation). The cell viability and genotoxicity were measured by MTT and MNT assay, respectively. The indicators of osteogenesis were analyzed by alkaline phosphatase activity, total protein content, and calcium deposition. The MTT and MNT assay showed that none of the tested materials was cytotoxic nor genotoxic. Concerning the indicators of osteogenesis, it was observed that cells in contact with all the materials were able to induce the osteogenesis and this process was influenced by the period of the cell culture in contact with bone substitutes. Based on the results of this study, it was concluded that this experimental ß-TCP appears to be a promising material as a bone substitute.

O objetivo deste estudo foi avaliar os indicadores da osteogênese, citotoxicidade e genotoxicidade de um beta-tricálcio fosfato (ß-TCP experimental) comparado com dois outros substitutos ósseos : Hidroxiapatita Bovina (HA) (Bio-Oss® - Geistlich) e beta-tricálcio fosfato (ß-TCP - Bionnovation). A viabilidade celular e genotoxicidade foram mensuradas pelos ensaios MTT e MNT, respectivamente. Os indicadores da osteogênese foram analisados pela atividade de fosfatase alcalina (ALP), conteúdo de proteína total, e deposição de cálcio. Os ensaios MTT e MNT mostraram que nenhum dos materiais testados foi citotóxico ou genotóxico. Em relação aos indicadores da osteogênese, foi observado que as células em contato com todos os materiais foram capazes de induzir a osteogênese, e que esse processo foi influenciado pelo período da cultura celular em contato com os substitutos ósseos. Baseado nos resultados desse estudo, conclui-se que este ß-TCP experimental parece ser um material promissor para ser utilizado como substituto ósseo.

Hierarchical structures of ß-TCP/45S5 bioglass hybrid scaffolds prepared by gelcasting.

This paper investigates the microstructure and the mechanical properties of ß-tricalcium phosphate (ß-TCP) three-dimensional (3D) porous materials reinforced with 45S5 bioactive glass (BG). ß-TCP and ß-TCP/x%-BG scaffolds with interconnected pores networks, suitable for bone regeneration, were fabricated by gel-casting method. Mechanical properties, porosity, and morphological characteristics were evaluated by compressive strength test, scanning electron microscopy (SEM) and X-ray microtomography analysis, whereas the structures were fully explored by XRD, and Raman spectroscopy. To the best of our knowledge, this is the first time where the mechanism for understanding the effect of bioglass on the mechanical properties and microstruture of ß-TCP/45S5-BG scaffolds has been systematically studied. The findings showed that ionic product lixiviated from 45S5 bioactive glass, rich in silicon species and sodium ion, catalyzes a phase transition from ß-TCP to Si-TCP by replacement of phosphorus for silicon and contributes to the improvement of scaffolds mechanical properties. The compressive strength of ß-TCP/5%-BG and ß-TCP/7.5%-BG was improved around 200% in comparison to pure ß-TCP. Osteoblast-like cells (MG 63) were exposed to the materials for 24h through the use of medium conditioned by ß-tricalcium phosphate/bioactive glass. Cell viability was measured by MTT assay in the cells and the data obtained were submitted to ANOVA, Tukey׳s multiple comparison (p<0.05). The ß-TCP/7.5-BG promoted an increase of cell proliferation. The results suggest that compositions and processing method studied may provide appropriate materials for tissue engineering.