Developmental kinetics of in vitro-produced bovine embryos: An aid for making decisions.

Embryo developmental kinetics and embryo survival after cryopreservation have been correlated with embryo quality and viability. The main objectives of this work were to analyze developmental ability and quality of in vitro-produced bovine embryos in relation to their kinetics and to establish a criterion of quality to predict further viability. Embryos were classified and grouped by their specific stage of development (2, 3-4, or ≥ 5 cells) at 44 hours post insemination (hpi) and cultured separately up to Day 8. On Days 7 and 8, good quality expanded blastocysts were vitrified or frozen. Cryopreserved surviving hatched embryos were stained for cell counts. Embryos at a more advanced stage (3-4 cells, and ≥5 cells) developed to morulae (P < 0.001) and blastocysts (P < 0.01) at higher rates than those embryos that had cleaved once by 44 hpi. Vitrification improved the hatching rates of blastocysts at 48 hours (P < 0.001) when compared with slow-rate freezing within each group of embryos (3-4 cells and ≥5 cells). After vitrification/warming, blastocysts coming from 3- to 4-cell embryos had higher hatching rates at 48 hours than those that came from ≥5-cell embryos. With regard to differential cell counts, no effect of the initial developmental stage was observed after warming/thawing. However, trophectoderm and total cells were higher in vitrified/warmed than in the frozen/thawed embryos (P < 0.001). These data show that selecting IVF embryos at 44 hpi, after the evaluation of their in vitro embryo development, could be used as noninvasive markers of embryo developmental competence and may help to select IVF embryos that would be more suitable for cryopreservation.

Survival of vitrified in vitro-produced bovine embryos after a one-step warming in-straw cryoprotectant dilution procedure.

Vitrification is an alternative to slow-rate freezing for cryopreserving bovine embryos. However, this technology requires simplification if it is to be used under field conditions. The main objective of this work was to develop a new system for the direct transfer of vitrified embryos to be used under farm conditions. For this, three objectives were set: (1) to compare the effect of vitrification, using the cryologic vitrification method (CVM), and slow-rate freezing on bovine embryo development and quality; (2) to develop a one-step warming procedure for bovine in vitro-produced (IVP) vitrified (by CVM) embryos; and (3) to assess the effects on embryo survival of a new method for the direct transfer of vitrified IVP bovine blastocysts. In vitro-produced blastocysts were initially either vitrified by CVM or subjected to slow freezing to compare embryo survival and quality (experiment 1). No differences were detected between these cryopreservation techniques in terms of the survival and quality variables at 24 hours or in terms of the proteins expressed. However, at 48 hours the vitrified embryos showed higher hatching rates, greater total cell numbers, and lower apoptotic indices (P < 0.05). In experiment 2, CVM-vitrified IVP blastocysts were warmed by the conventional two-step or one-step warming procedure by incubating them at 41 °C in 0.25 M sucrose for 10 minutes, 0.15 M sucrose for 10 minutes, or 0.25 M sucrose for 5 minutes. In addition, embryo transfer (ET) was performed using vitrified embryos warmed by the one-step procedure in 0.25 M sucrose solution for 5 minutes. As a control group, IVP fresh embryos were transferred to recipient females. No differences were observed in embryo survival or total cell number between any of the warming procedures. Moreover, no significant differences for pregnancy at 60 days were found between the ET groups. In experiment 3, expanded IVP blastocysts were then either vitrified using a conventional or a modified fiber plug designed to allow direct ET after in-straw cryoprotectant (CP) dilution. They were warmed using the one-step process (0.25 M sucrose, 5 minutes) in a 0.25 mL French straw. Embryo recovery associated with the modified fibreplug system was less reliable than with the conventional system. However, no differences were seen between the systems in terms of in vitro embryo survival among those finally recovered. Finally, IVP blastocysts were vitrified using conventional fibreplugs to maintain a high embryo recovery rate, and then warmed using the one-step warming in-straw CP dilution procedure, but using an adapter with a wider opening coupled to the French straw and a heated metal chamber to protect and keep the straw at 41 °C (experiment 4). No differences were seen in embryo survival rates between the two groups. The CVM combined with this new one-step warming in-straw CP dilution procedure could be used for direct ET under field conditions.

Prediction of pregnancy viability in bovine in vitro-produced embryos and recipient plasma with Fourier transform infrared spectroscopy.

We analyzed embryo culture medium (CM) and recipient blood plasma using Fourier transform infrared (FTIR) metabolomics to predict pregnancy outcome. Individually cultured, in vitro-produced (IVP) blastocysts were transferred to recipients as fresh and vitrified-warmed. Spent CM and plasma samples were evaluated using FTIR. The discrimination capability of the classifiers was assessed for accuracy, sensitivity (pregnancy), specificity (nonpregnancy), and area under the receiver operator characteristic curve (AUC). Within all IVP fresh embryos (birth rate=52%), high AUC were obtained at birth, especially with expanded blastocysts (CM: 0.80±0.053; plasma: 0.89±0.034). The AUC of vitrified IVP embryos (birth rate = 31%) were 0.607±0.038 (CM, expanded blastocysts) and 0.672±0.023 (plasma, all stages). Recipient plasma generally predicted pregnancy outcome better than did embryo CM. Embryos and recipients with improved pregnancy viability were identified, which could increase the economic benefit to the breeding industry.

Elements of functional genital asymmetry in the cow.

Asymmetry in the cow affects ovarian function and pregnancy. In this work we studied ovarian and uterine asymmetry. Synchronised animals, in which in vitro-produced embryos (n=30-60) had been transferred on Day 5 to the uterine horn ipsilateral to the corpus luteum (CL), were flushed on Day 8. Ovulatory follicle diameter, oestrus response and total protein flushed did not differ between sides. However, a corpus luteum in the right ovary led to plasma progesterone concentrations that were higher than when it was present in the left ovary. Fewer embryos were recovered from the left than the right horn. Among 60 uterine proteins identified by difference gel electrophoresis, relative abundance of nine (acyl-CoA dehydrogenase, very long chain; twinfilin, actin-binding protein, homologue 1; enolase 1; pyruvate kinase isozymes M1/M2 (rabbit); complement factor B Bb fragment ; albumin; fibrinogen gamma-B chain; and ezrin differed (P<0.05) between horns. Glucose concentration was higher, and fructose concentration lower, in the left horn. In a subsequent field trial, pregnancy rates after embryo transfer did not differ between horns (51.0±3.6, right vs 53.2±4.7, left). However, Day 7 blood progesterone concentrations differed (P=0.018) between pregnant and open animals in the left (15.9±1.7 vs 8.3±1.2) but not in the right horn (12.4±1.3 vs 12.4±1.2). Progesterone effects were independent of CL quality (P=0.55). Bilateral genital tract asymmetry in the cow affects progesterone, proteins and hexoses without altering pregnancy rates.

Cell counts and survival to vitrification of bovine in vitro produced blastocysts subjected to sublethal high hydrostatic pressure.

This work analyses the effects of a high hydrostatic pressure (HHP) treatment on in vitro survival of in vitro produced (IVP) bovine embryos vitrified with the Cryologic Vitrification Method (CVM). Consequences on embryo quality in terms of cell proliferation and differentiation, and levels of embryonic Heat Shock Protein 70 (Hsp-70) were also examined. Day 7 and 8 bovine in vitro-produced blastocysts were submitted to an HHP treatment (60 MPa, at 32 °C for 1 h) and allowed to recover for 1 or 2 h in culture medium. The HHP treatment did not improve blastocyst survival rates after vitrification/warming. Survival (24 h post-warming) and hatching (48 h post-warming) rates were 79.3 ± 4.9 and 51.8 ± 4.2 vs 73.9 ± 4.2 and 44.7 ± 4.1 for untreated controls and HHP-treated embryos, respectively. Total cell numbers measured in fresh embryos were reduced after 1 h at 32 °C, with or without HHP treatment, indicating that cell proliferation was stopped as a result of stress. Vitrified HHP-treated embryos that hatched at 48 h after warming showed increased cell numbers in their ICM compared with untreated controls (50.2 ± 3.1 vs 38.8 ± 2.7), indicating higher embryo quality. Treatment of blastocysts with HHP did not alter the level of the Hsp-70 protein. In our conditions, HHP treatment did not affect the cryoresistance of these embryos. However, combination of HHP treatment and vitrification in fibreplugs resulted in an increase in the ICM cell number of hatched embryos 48 h post-warming.

Assessment of meiotic spindle configuration and post-warming bovine oocyte viability using polarized light microscopy.

The objectives of this study were to assess the efficiency of polarized light microscopy (PLM) in detecting microtubule-polymerized protein in in vitro-matured bovine oocytes; to examine its effects on oocyte developmental competence; and to assess the meiotic spindle of in vitro-matured oocytes after vitrification/warming and further assessment of oocyte developmental competence. In the first experiment, the presence of microtubule-polymerized protein (MPP) was confirmed as a positive PLM signal detected in 99.1% of analysed oocytes (n = 115), which strongly correlated (r = 1; p < 0.0001) with the presence of MPP as confirmed by immunostaining. In the second experiment, oocytes (n = 651) were exposed or not (controls) to PLM for 10 min and then fertilized and cultured in vitro. Oocytes exposed to PLM did not significantly differ from controls with regard to cleavage, total blastocyst and expanded blastocyst rates and cell numbers. In the third experiment, meiotic spindles were detected in 145 of 182 oocytes (79.6%) following vitrification and warming. Interestingly, after parthenogenetic activation and in vitro culture, oocytes that displayed a positive PLM signal PLM(+) differed significantly from PLM(-) in cleavage and Day 8 blastocyst rates. These results suggest that polarized light microscopy is an efficient system to detect microtubule-polymerized protein in in vitro-matured bovine oocytes and does not exert detrimental effects on bovine oocyte developmental competence. Moreover, PLM could be used as a tool to assess post-warming viability in vitrified bovine oocytes.

In vitro and in vivo quality of bovine embryos in vitro produced with sex-sorted sperm.

In this work we analyzed the effects of three culture systems on developmental ability of bovine embryos in vitro produced with sexed sperm, the survival to vitrification (cryologic vitrification method) of such blastocysts, and their pregnancy rates after embryo transfer to recipients, both as fresh and after vitrification/warming. Finally, we measured the accuracy of the sorting protocol by a polymerase chain reaction-based method to validate the embryo sex at blastocyst stages. We confirmed an individual effect of the bull as well as development rates of embryos produced with sorted sperm lower than embryos with unsorted sperm, independent of the culture system used. The cryoresistance to vitrification of embryos produced with sexed sperm did not differ from that of conventionally produced embryos (re-expansion rates at 24 and 48 h: 74.6% vs. 75.5%, and 64.5% vs. 68.1% for embryos produced with conventional and sorted sperm, respectively; hatching rates at 48 h: 63.55% vs. 55.5% for embryos produced with conventional and sorted sperm, respectively). Finally, no significant differences were found in pregnancy rates after the embryo transfer of fresh and vitrified/warmed blastocysts (52.8% vs. 42.0%, respectively; P > 0.05). Male and female embryos produced with sorted sperm showed the same quality in terms of developmental ability, cryoresistance, and pregnancy rates after transfer. Our culture system, coupled with the vitrification in fiber plugs, provides good quality sex-known embryos which survive vitrification at similar rates than embryos produced with conventional unsorted sperm; also it produces good pregnancy rates after transfer of sexed embryos both fresh and after vitrification and warming.

In vitro development of bovine embryos cultured with activin A.

The aim of this study was to investigate the effects of activin A on development, differential cell counts and apoptosis/necrosis rates of bovine embryos produced in vitro. Presumptive zygotes were cultured up to Day 8 in synthetic oviduct fluid containing aminoacids, citrate, myo-inositol and BSA. In Experiment 1, activin (10 ng mL(-1)) was added: 1/from Day 1 to Day 3; 2/from Day 1 to Day 8; 3/from Day 3 to Day 8; or 4/absent (control). In Experiment 2, 10 ng mL(-1) activin were added either before (Day 3 to Day 5) or after (Day 5 to Day 8) the early morula stage. In Experiment 1, activin during the first 72 h of culture reduced Day 3 cleavage, 5-8 cell rates and blastocyst development, while hatching rates increased. No changes were observed within differential cell counts. In experiment 2, activin improved blastocyst development after, and had no effect before, the Day 5 morula stage. However, trophectoderm (TE) cell numbers decreased with activin both before and after the Day 5 morula stage, suggesting that activin inhibits TE differentiation. The presence of activin during the whole culture had no effect on TUNEL positive cells, but when added at shorter periods activin increased apoptotic rates. Effects of activin during in vitro bovine embryo development, depends on timing of its addition to the culture medium.

Constraints to progress in embryonic stem cells from domestic species.

Domestic animal embryonic stem cells are of potentially big value in transgenic research and studies of lineage commitment and development. Unfortunately, despite many efforts, validated embryonic stem cell lines in species other than mice and primates are yet to be isolated. Here we review some factors that might help to explain why derivation of domestic animal embryonic stem cells is still unsuccessful.