Synthesis and Optimization of Ni-Based Nano Metal-Organic Frameworks as a Superior Electrode Material for Supercapacitor.

Metal-organic frameworks (MOFs) are hybrid materials that are being explored as active electrode materials in energy storage devices, such as rechargeable batteries and supercapacitors (SCs), due to their high surface area, controllable chemical composition, and periodic ordering. However, the facile and controlled synthesis of a pure MOF phase without impurities or without going through a complicated purification process (that also reduces the yield) are challenges that must be resolved for their potential industrial applications. Moreover, various oxide formations of the Ni during Ni-MOF synthesis also represent an issue that affects the purity and performance. To resolve these issues, we report the controlled synthesis of nickel-based metal-organic frameworks (NiMOFs) by optimizing different growth parameters during hydrothermal synthesis and by utilizing nickel chloride as metal salt and H2bdt as the organic ligand, in a ratio of 1:1 at 150 °C. Furthermore, the synthesis was optimized by introducing a magnetic stirring stage, and the reaction temperature varied across 100, 150, and 200 °C to achieve the optimized growth of the NiMOFs crystal. The rarely used H2bdt ligand for Ni-MOF synthesis and the introduction of the ultrasonication stage before putting it in the furnace led to the formation of a pure phase without impurities and oxide formation. The synthesized materials were further characterized by powder X-ray diffraction (XRD) technique, scanning electron microscopy (SEM), and UV-vis spectroscopy. The SEM images exhibited the formation of nano NiMOFs having a rectangular prism shape. The average size was 126.25 nm, 176.0 nm, and 268.4 nm for the samples (1:1)s synthesized at 100 °C, 150 °C, and 200 °C, respectively. The electrochemical performances were examined in a three-electrode configuration, in a wide potential window from -0.4 V to 0.55 V, and an electrolyte concentration of 2M KOH was maintained for each measurement. The charge-discharge galvanostatic measurement results in specific capacitances of 606.62 F/g, 307.33 F/g, and 287.42 F/g at a current density of 1 A/g for the synthesized materials at 100 °C, 150 °C, and 200 °C, respectively.

Structural and Electrical Characterization of LaSrAl1-xMgxO4-δ Layered Perovskites Obtained by Mechanical Synthesis.

This work presents the structural and electrical characterization of K2NiF4-type layered perovskites of LaSrAl1-xMgxO4-δ composition to be used as oxide-ion electrolytes for a solid-oxide fuel cell (SOFC). These perovskites were prepared by mechano-chemical synthesis (ball milling), an alternative to traditional synthesis methods such as citrate-nitrates and solid-state reaction. With these methods, two things are avoided: first, the use of nitrate salts, which are more environmentally harmful than oxide precursors, and second, it saves the series of long thermal treatments associated with solid-state reactions. After grinding the precursors, nanometric particles were obtained with a combination of crystalline regions and amorphous regions; this effect was determined by XRD and TEM, showing that Mg has a positive effect on the phase formation by only mechanical synthesis. R2C4: After sintering, it was found by XRD that the sample x = 0.1 only presents the diffraction peaks corresponding to the desired phase, which shows a phase purity greater than 97%, even higher than that of the standard undoped sample. For x = 0.2 and 0.3, there was a segregation of impurities, possibly by the local migration of La and Sr heavy cations; this was determined by SEM and EDS. The electrical characterization of the sintered pellets was carried out by electrochemical impedance spectroscopy, which determined that the incorporation of Mg in the structure improves the ionic conductivity by three orders of magnitude, obtaining conductivities of 1.6 mS/cm at 900 °C for x = 0.2. Although the improvement in conductivity is considerable, many challenges such as densification, the segregation of impurities, and the study of mechanical and thermal properties must be carried out on these materials to endorse them as solid electrolytes in SOFC.

Design, Synthesis, Structure and Properties of Ba-Doped Derivatives of SrCo0.95Ru0.05O3-δ Perovskite as Cathode Materials for SOFCs.

We have designed and prepared a novel cathode material for solid oxide fuel cell (SOFC) based on SrCo0.95Ru0.05O3-δ perovskite. We have partially replaced Sr by Ba in Sr0.9Ba0.1Co0.95Ru0.05O3-δ (SBCRO) in order to expand the unit-cell size, thereby improving the ionic diffusion of O2- through the crystal lattice. The characterization of this new oxide has been studied at room temperature by X-ray diffraction (XRD) and neutron powder diffraction (NPD) experiments. At room temperature, SBCRO perovskite crystallizes in the P4/mmm tetragonal space group, as observed from NDP data. The maximum conductivity value of 18.6 S cm-1 is observed at 850 °C. Polarization resistance measurements on LSGM electrolyte demonstrate an improvement in conductivity with respect to the parent Sr-only perovskite cathode. A good chemical compatibility and an adequate thermal expansion coefficient make this oxide auspicious for using it as a cathode in SOFC.

Dual Oxygen Defects in Layered La1.2Sr0.8-xBaxInO4+δ (x = 0.2, 0.3) Oxide-Ion Conductors: A Neutron Diffraction Study.

The title compounds exhibit a K2NiF4-type layered perovskite structure; they are based on the La1.2Sr0.8InO4+δ oxide, which was found to exhibit excellent features as fast oxide-ion conductor via an interstitial oxygen mechanism. These new Ba-containing materials were designed to present a more open framework to enhance oxygen conduction. The citrate-nitrate soft-chemistry technique was used to synthesize such structural perovskite-type materials, followed by annealing in air at moderate temperatures (1150 °C). The subtleties of their crystal structures were investigated from neutron powder diffraction (NPD) data. They crystallize in the orthorhombic Pbca space group. Interstitial O3 oxygen atoms were identified by difference Fourier maps in the NaCl layer of the K2NiF4 structure. At variance with the parent compound, conspicuous oxygen vacancies were found at the O2-type oxygen atoms for x = 0.2, corresponding to the axial positions of the InO6 octahedra. The short O2-O3 distances and the absence of steric impediments suggest a dual oxygen-interstitial mechanism for oxide-ion conduction in these materials. Conductivity measurements show that the activation energy values are comparable to those typical of ionic conductors working by simple vacancy mechanisms (~1 eV). The increment of the total conductivity for x = 0.2 can be due to the mixed mechanism driving both oxygen vacancies and interstitials, which is original for these potential electrolytes for solid-oxide fuel cells.

New Rhenium-Doped SrCo1-xRexO3-δ Perovskites Performing as Cathodes in Solid Oxide Fuel Cells.

In the aim to stabilize novel three-dimensional perovskite oxides based upon SrCoO3-δ, we have designed and prepared SrCo1-xRexO3-δ phases (x = 0.05 and 0.10), successfully avoiding the competitive hexagonal 2H polytypes. Their performance as cathode materials in intermediate-temperature solid oxide fuel cells (IT-SOFC) has been investigated. The characterization of these oxides included X-ray (XRD) and in situ temperature-dependent neutron powder diffraction (NPD) experiments for x = 0.10. At room temperature, SrCo1-xRexO3-δ perovskites are defined in the P4/mmm space group, which corresponds to a subtle tetragonal perovskite superstructure with unit-cell parameters a = b ≈ ao, c = 2ao (ao = 3.861 and 3.868 Å, for x = 0.05 and 0.10, respectively). The crystal structure evolves above 380 °C to a simple cubic perovskite unit cell, as observed from in-situ NPD data. The electrical conductivity gave maximum values of 43.5 S·cm-1 and 51.6 S·cm-1 for x = 0.05 and x = 0.10, respectively, at 850 °C. The area specific resistance (ASR) polarization resistance determined in symmetrical cells is as low as 0.087 Ω·cm² and 0.065 Ω·cm² for x = 0.05 and x = 0.10, respectively, at 850 °C. In single test cells these materials generated a maximum power of around 0.6 W/cm² at 850 °C with pure H2 as a fuel, in an electrolyte-supported configuration with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) as the electrolyte. Therefore, we propose the SrCo1-xRexO3-δ (x = 0.10 and 0.05) perovskite oxides as promising candidates for cathodes in IT-SOFC.