Synthesis of Cs-symmetrical C60 tetra-adducts via reactions of C60Cl6 with CH-acids and enol silyl ester.

Here we report the synthesis of novel fullerene derivatives with attached aliphatic residues based on the previously unknown reactions of chlorofullerene C60Cl6 with CH-acids and silyl enol ether.

Anthraquinone-Quinizarin Copolymer as a Promising Electrode Material for High-Performance Lithium and Potassium Batteries.

The growing demand for cheap, safe, recyclable, and environmentally friendly batteries highlights the importance of the development of organic electrode materials. Here, we present a novel redox-active polymer comprising a polyaniline-type conjugated backbone and quinizarin and anthraquinone units. The synthesized polymer was explored as a cathode material for batteries, and it delivered promising performance characteristics in both lithium and potassium cells. Excellent lithiation efficiency enabled high discharge capacity values of >400 mA g-1 in combination with good stability upon charge-discharge cycling. Similarly, the potassium cells with the polymer-based cathodes demonstrated a high discharge capacity of >200 mAh g-1 at 50 mA g-1 and impressive stability: no capacity deterioration was observed for over 3000 cycles at 11 A g-1, which was among the best results reported for K ion battery cathodes to date. The synthetic availability and low projected cost of the designed material paves a way to its practical implementation in scalable and inexpensive organic batteries, which are emerging as a sustainable energy storage technology.

Molecular Structure-Intrinsic Photostability Relationships for a Series of Conjugated Polymers: Backbone Substitution Matters!

Herein, we present an efficient approach for screening the intrinsic photostability of organic absorber materials used in photovoltaic applications. Using a series of structurally related conjugated polymers and a set of complementary techniques, we established important "material structure-photostability" relationships. In particular, we have revealed that the introduction of alkoxy, thioalkyl, and fluorine substituents adversely affects the material photostability. Further systematic screening of different types of materials using the developed techniques should yield a set of guidelines for designing more stable absorber materials for organic solar cells.

Direct Nanoscale Visualization of the Electric-Field-Induced Aging Dynamics of MAPbI3 Thin Films.

Perovskite solar cells represent the most attractive emerging photovoltaic technology, but their practical implementation is limited by solar cell devices' low levels of operational stability. The electric field represents one of the key stress factors leading to the fast degradation of perovskite solar cells. To mitigate this issue, one must gain a deep mechanistic understanding of the perovskite aging pathways associated with the action of the electric field. Since degradation processes are spatially heterogeneous, the behaviors of perovskite films under an applied electric field should be visualized with nanoscale resolution. Herein, we report a direct nanoscale visualization of methylammonium (MA+) cation dynamics in methylammonium lead iodide (MAPbI3) films during field-induced degradation, using infrared scattering-type scanning near-field microscopy (IR s-SNOM). The obtained data reveal that the major aging pathways are related to the anodic oxidation of I- and the cathodic reduction of MA+, which finally result in the depletion of organic species in the channel of the device and the formation of Pb. This conclusion was supported by a set of complementary techniques such as time-of-flight secondary ion mass spectrometry (ToF-SIMS), photoluminescence (PL) microscopy, scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) microanalysis. The obtained results demonstrate that IR s-SNOM represents a powerful technique for studying the spatially resolved field-induced degradation dynamics of hybrid perovskite absorbers and the identification of more promising materials resistant to the electric field.

Synchronously Producing H2 and Purifying Methyl Orange-Polluted Water through the Reaction of an Al-GaInSn Alloy Plate and H2O.

Hydrogen gas (H2) as a fuel has the advantages of high energy density (122 kJ g-1) and zero carbon emissions. To meet the growing demand for H2 in the future, green, efficient, and convenient production technologies must be developed. The Al-H2O reaction, which produces H2 by reacting aluminum (Al) with water (H2O), is considered a rapid method for producing H2. However, Al-H2O creates a protective oxide layer on the surface of Al, preventing the production of H2. In this study, we developed a simple method for forming Al-GaInSn alloy by brushing GaInSn-Al2O3 grease onto an Al plate to form an Al/GaInSn-Al2O3/Al sandwich structure. Al2O3 in the sample supports GaInSn, prevents the leakage of GaInSn, and promotes its penetration into the Al lattice to form Al-GaInSn alloy. By forming a liquid phase within the alloy, GaInSn increases the accessibility of Al to the reaction. As a result, the Al-GaInSn alloy can rapidly react with pure H2O to produce H2 at room temperature conditions, with yields as high as ∼93.2%. It was interesting to find that dye-polluted water (methyl orange) could be synchronically purified by the Al-H2O reaction at the same time.

Sn and Ge Complexes with Redox-Active Ligands as Efficient Interfacial Membrane-like Buffer Layers for p-i-n Perovskite Solar Cells.

Inverted perovskite solar cells with a p-i-n configuration have attracted considerable attention from the research community because of their simple design, insignificant hysteresis, improved operational stability, and low-temperature fabrication technology. However, this type of device is still lagging behind the classical n-i-p perovskite solar cells in terms of its power conversion efficiency. The performance of p-i-n perovskite solar cells can be increased using appropriate charge transport and buffer interlayers inserted between the main electron transport layer and top metal electrode. In this study, we addressed this challenge by designing a series of tin and germanium coordination complexes with redox-active ligands as promising interlayers for perovskite solar cells. The obtained compounds were characterized by X-ray single-crystal diffraction and/or NMR spectroscopy, and their optical and electrochemical properties were thoroughly studied. The efficiency of perovskite solar cells was improved from a reference value of 16.4% to 18.0-18.6%, using optimized interlayers of the tin complexes with salicylimine (1) or 2,3-dihydroxynaphthalene (2) ligands, and the germanium complex with the 2,3-dihydroxyphenazine ligand (4). The IR s-SNOM mapping revealed that the best-performing interlayers form uniform and pinhole-free coatings atop the PC61BM electron-transport layer, which improves the charge extraction to the top metal electrode. The obtained results feature the potential of using tin and germanium complexes as prospective materials for improving the performance of perovskite solar cells.

Atomic understanding of the strain-induced electrocatalysis from DFT calculation: progress and perspective.

Catalyst activity affects the reaction rate, and an increasing number of studies have shown that strain can significantly increase the electrocatalytic activity. Catalysts such as alloys and core-shell structures can modulate their properties through strain effects. Reasonable simulation techniques can be used to predict and design the catalytic performance based on understanding the strain action mechanism. Therefore, the methodological flow of theoretical simulations is summarised in this review. The mechanism underlying the strain-adsorption-reaction relationship is discussed using density functional theory (DFT) calculations. An introduction to DFT is given first, followed by a quick rundown of the strain classification and application. Typical electrocatalytic reactions, namely, the hydrogen and oxygen evolution reactions and oxygen reduction reaction, are taken as examples. After briefly explaining these reactions, the relevant studies on simulating the strain to tune the catalyst performance are covered. The simulation methods are summarised and analysed to observe the effects of strain on electrocatalytic properties. Finally, a summary of the issues with simulated strain-assisted design and a discussion on the perspectives and forecasts for the future design of effective catalysts are provided.

Water-Soluble Fullerene C60 Derivatives Are Effective Inhibitors of Influenza Virus Replication.

The influenza virus genome features a very high mutation rate leading to the rapid selection of drug-resistant strains. Due to the emergence of drug-resistant strains, there is a need for the further development of new potent antivirals against influenza with a broad activity spectrum. Thus, the search for a novel, effective broad-spectrum antiviral agent is a top priority of medical science and healthcare systems. In this paper, derivatives based on fullerenes with broad virus inhibiting activities in vitro against a panel of influenza viruses were described. The antiviral properties of water-soluble fullerene derivatives were studied. It was demonstrated that the library of compounds based on fullerenes has cytoprotective activity. Maximum virus-inhibiting activity and minimum toxicity were found with compound 2, containing residues of salts of 2-amino-3-cyclopropylpropanoic acid (CC50 > 300 µg/mL, IC50 = 4.73 µg/mL, SI = 64). This study represents the initial stage in a study of fullerenes as anti-influenza drugs. The results of the study lead us conclude that five leading compounds (1-5) have pharmacological prospects.

A regioselective step-by-step C60Cl6 functionalization approach affords a novel family of C60Ar5Th'Th''H fullerene derivatives with promising antiviral properties.

We report a novel reaction of the recently discovered family of fullerene derivatives C1-C60Ar5Th' with thiophene derivatives Th''H yielding a previously unknown family of C1-C60Ar5Th'Th''H compounds with three different types of functional aromatic addends attached to the carbon cage. The discovered reaction paves a way to the synthesis of novel C60 fullerene derivatives with promising antioxidant and antiviral properties.

Hypoglycemic and hypolipidemic effect of pentaamino acid fullerene C60 derivative in rats with metabolic disorder.

Pentaamino acid fullerene C60 derivative is a promising nanomaterial, which exhibited antihyperglycemic activity in high-fat diet and streptozotocin-induced diabetic rats. This study investigates the effect of pentaaminoacid C60 derivative (PFD) in rats with metabolic disorders. Rats were assigned to 3 groups (of 10 rats each) as follows: Group 1 (normal control), group 2 included the protamine-sulfate-treated rats (the untreated group of animals with the model metabolic disorder); group 3 (Protamine sulfate + PFD) included the protamine-sulfate-treated model rats that received an intraperitoneal injection of PFD. Metabolic disorder in rats was initiated by protamine sulfate (PS) administration. The PS + PFD group was injected intraperitoneally with PFD solution (3 mg/kg). Protamine sulfate induces biochemical changes (hyperglycemia, hypercholesterolemia, and hypertriglyceridemia) in the blood and morphological lesions in rat liver and pancreas. The potassium salt of fullerenylpenta-N-dihydroxytyrosine in protamine sulfate-induced rats normalized blood glucose level and the serum lipid profile and improved hepatic function markers. Treatment with PFD restored pancreas islets and liver structure of protamine sulfate-induced rats compared to the untreated group. PFD is a promising compound for further study as a drug against metabolic disorders.

Electrostatic effects on water-soluble fullerene derivatives interaction with cytochrome c and cytochrome c oxidase.

Water-soluble fullerene derivatives are good candidates for various biological applications such as anticancer or antimicrobial therapy, cytoprotection, enzyme inhibition, and many others. Their toxicity, both in tissue culture and in vivo, is a critical characteristic for the development and restriction of these applications. The effects of six water-soluble cationic and anionic polysubstituted fullerene derivatives on cytochrome c oxidase activity in rat brain mitochondria and the possibility of cytochrome c binding were studied. We found that the ability of these fullerene derivatives to bind with cytochrome c oxidase and charged molecules like eosin Y strongly depends on their electrostatic charge. As was shown, the cationic fullerene derivative inhibits cytochrome c oxidase that has the overall negative electrostatic potential completely, unlike anionic derivatives. Thus, it confirms the essential role of electrostatic interactions in the interaction of fullerene derivatives with the active site of enzymes. The results explore how cationic fullerene derivatives play a role in mitochondrial dysfunction, oxidative stress, and cytotoxicity.

Dual Optimization of Bulk and Interface via the Synergistic Effect of Ligand Anchoring and Hole Transport Dopant Enables 23.28% Efficiency Inverted Perovskite Solar Cells.

The crystalline morphology of perovskite film plays a key role in determining the stability and performance of perovskite solar cells (PSCs). In addition, the work function and conductivity of hole transport layer (HTL) have a great influence on the effciency of PSCs. Here, we develop a synergistic doping strategy to fabricate high-performance inverted PSCs, doping a functional nanographene (C78-AHM) into the poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA) HTL, thus forming an HTL with higher conductivity, lower roughness, and frontier energy levels matching the perovskite absorber work function. On this basis, thiosemicarbazide (TSC) was doped into the precursor solution of perovskite as the grain and interface modifier to further improve the crystalline morphology of perovskite film. Compared with the current single passivation method, this codoping strategy can simultaneously reduce the surface and bulk defects of perovskite film and reduce the interface energy barrier. Eventually, high-quality TSC-doped perovskite films based on C78-AHM-doped PTAA HTL are obtained with over 2 µm sized grains, pinhole-free, and improved crystallinity. As a result, this synergistic doping strategy increases the efficiency of the device from 20.27% to 23.28%. Furthermore, the environmental and thermal stabilities of the devices are significantly improved. Therefore, this work provides a simple way for the preparation of other efficient optoelectronic devices.

Exploring the Limits: Degradation Behavior of Lead Halide Perovskite Films under Exposure to Ultrahigh Doses of γ Rays of Up to 10 MGy.

Herein, we show that thin films of MAPbI3, FAPbI3, (CsMA)PbI3, and (CsMAFA)PbI3, where MA and FA are methylammonium and formamidinium cations, respectively, tolerate ultrahigh doses of γ rays approaching 10 MGy without significant changes in their absorption spectra. However, among the studied materials, FAPbI3 was the only one that did not form metallic lead due to its extreme radiation hardness. Infrared near-field optical microscopy revealed the radiation-induced depletion of organic cations from the grains of MAPbI3 and their accumulation at the grain boundaries, whereas FAPbI3 on the contrary lost FA cations from the grain boundaries. The multication (CsMAFA)PbI3 perovskite underwent a facile phase segregation to domains enriched with MA and FA cations, which is a principally new radiation-induced degradation pathway. Our findings suggest that the radiation hardness of the rationally designed perovskite semiconductors could go far beyond the impressive threshold of 10 MGy we set herein for FAPbI3 films, which opens many exciting opportunities for practical implementation of these materials.

Enhancing Photostability of Complex Lead Halides through Modification with Antibacterial Drug Octenidine.

The high power-conversion efficiencies of hybrid perovskite solar cells encourage many researchers. However, their limited photostability represents a serious obstacle to the commercialization of this promising technology. Herein, we present an efficient method for improving the intrinsic photostability of a series of commonly used perovskite material formulations such as MAPbI3, FAPbI3, Cs0.12FA0.88PbI3, and Cs0.10MA0.15FA0.75PbI3 through modification with octenidine dihydroiodide (OctI2), which is a widely used antibacterial drug with two substituted pyridyl groups and two cationic centers in its molecular framework. The most impressive stabilizing effects were observed in the case of FAPbI3 and Cs0.12FA0.88PbI3 absorbers that were manifested in significant suppression or even blocking of the undesirable perovskite films' recrystallization and other decomposition pathways upon continuous 110 mW/cm2 light exposure. The achieved material photostability-within 9000 h for the Oct(FA)n-1PbnI3n+1 (n = 40-400) and 20,000 h for Oct(Cs0.12FA0.88)n-1PbnI3n+1 (where n = 40-400) formulations-matches the highest values ever reported for complex lead halides. It is important to note that the stabilizing effect is maintained when OctI2 is used only as a perovskite surface-modifying agent. Using a two-cation perovskite composition as an example, we showed that the performances of the solar cells based on the developed Oct(Cs0.12FA0.88)399Pb400I1201 absorber material are comparable to that of the reference devices based on the unmodified perovskite composition. These findings indicate a great potential of the proposed approach in the design of new highly photostable and efficient light absorbers. We believe that the results of this study will also help to establish important guidelines for the rational material design to improve the operational stability of perovskite solar cells.

Self-Organization of Fullerene Derivatives in Solutions and Biological Cells Studied by Pulsed Field Gradient NMR.

Fullerene derivatives are of great interest in various fields of science and technology. Fullerene derivatives are known to have pronounced anticancer and antiviral activity. They have antibacterial properties. Their properties are largely determined by association processes. Understanding the nature and properties of associates in solvents of various types will make it possible to make significant progress in understanding the mechanisms of aggregation of molecules of fullerene derivatives in solutions. Thus, this work, aimed at studying the size and stability of associates, is relevant and promising for further research. The NMR method in a pulsed field gradient was used, which makes it possible to directly study the translational mobility of molecules. The sizes of individual molecules and associates were calculated based on the Stokes-Einstein model. The lifetime of associates was also estimated. The interaction of water-soluble C60 fullerene derivatives with erythrocytes was also evaluated. The values of self-diffusion coefficients and the lifetime of molecules of their compounds in cell membranes are obtained. It is concluded that the molecules of fullerene derivatives are fixed on the cell surface, and their forward movement is controlled by lateral diffusion.

Advanced Nonvolatile Organic Optical Memory Using Self-Assembled Monolayers of Porphyrin-Fullerene Dyads.

Photo-switchable organic field-effect transistors (OFETs) represent an important platform for designing memory devices for a diverse array of products including security (brand-protection, copy-protection, keyless entry, etc.), credit cards, tickets, and multiple wearable organic electronics applications. Herein, we present a new concept by introducing self-assembled monolayers of donor-acceptor porphyrin-fullerene dyads as light-responsive triggers modulating the electrical characteristics of OFETs and thus pave the way to the development of advanced nonvolatile optical memory. The devices demonstrated wide memory windows, high programming speeds, and long retention times. Furthermore, we show a remarkable effect of the orientation of the fullerene-polymer dyads at the dielectric/semiconductor interface on the device behavior. In particular, the dyads anchored to the dielectric by the porphyrin part induced a reversible photoelectrical switching of OFETs, which is characteristic of flash memory elements. On the contrary, the devices utilizing the dyad anchored by the fullerene moiety demonstrated irreversible switching, thus operating as read-only memory (ROM). A mechanism explaining this behavior is proposed using theoretical DFT calculations. The results suggest the possibility of revisiting hundreds of known donor-acceptor dyads designed previously for artificial photosynthesis or other purposes as versatile optical triggers in advanced OFET-based multibit memory devices for emerging electronic applications.

Nanoscale Visualization of Photodegradation Dynamics of MAPbI3 Perovskite Films.

Herein, we report the nanoscale visualization of the photochemical degradation dynamics of MAPbI3 (MA = CH3NH3+) using infrared scattering scanning near-field microscopy (IR s-SNOM) combined with a series of complementary analytical techniques such as UV-vis and FTIR-spectroscopy, XRD, and XPS. Light exposure of the MAPbI3 films resulted in a gradual loss of MA+ cations starting from the grain boundaries at the film surface and slowly progressing toward the center of the grains and deeper into the bulk perovskite phase. The binary lead iodide PbI2 was found to be the major perovskite photochemical degradation product under the experimental conditions used. Interestingly, the formation of the PbI2 skin over the perovskite grains resulted in a largely enhanced photoluminescence, which resembles the effects observed for core-shell quantum dots. The obtained results demonstrate that IR s-SNOM represents a powerful technique for studying the spatially resolved degradation dynamics of perovskite absorbers and revealing the associated material aging pathways.

Resist or Oxidize: Identifying Molecular Structure-Photostability Relationships for Conjugated Polymers Used in Organic Solar Cells.

Although organic solar cells have started to demonstrate competitive power conversion efficiencies of >18 %, their operational lifetimes remain insufficient for wide practical use and the factors influencing the photostability of absorber materials and completed devices are still not completely understood. A systematic study of two series of structurally similar [XTBT]n and [XTTBTBTT]n polymers (16 structures in total) reveals the building blocks that enable the highest material stability towards photooxidation: fluorene, silafluorene, carbazole, diketopyrrolopyrrole, and isoindigo. Furthermore, a direct correlation is evident between the electronic properties of the conjugated polymers and their reactivity towards oxygen. The structures with the lowest highest occupied molecular orbital (HOMO) energies show the highest electrochemical oxidation potentials and appear to be the most resistant towards chemical oxidation. These relationships set important guidelines for the further rational design of new absorber materials for efficient and stable organic photovoltaics.

The Phosphonate Derivative of C60 Fullerene Induces Differentiation towards the Myogenic Lineage in Human Adipose-Derived Mesenchymal Stem Cells.

Inductors of myogenic stem cell differentiation attract attention, as they can be used to treat myodystrophies and post-traumatic injuries. Functionalization of fullerenes makes it possible to obtain water-soluble derivatives with targeted biochemical activity. This study examined the effects of the phosphonate C60 fullerene derivatives on the expression of myogenic transcription factors and myogenic differentiation of human mesenchymal stem cells (MSCs). Uptake of the phosphonate C60 fullerene derivatives in human MSCs, intracellular ROS visualization, superoxide scavenging potential, and the expression of myogenic, adipogenic, and osteogenic differentiation genes were studied. The prolonged MSC incubation (within 7-14 days) with the C60 pentaphoshonate potassium salt promoted their differentiation towards the myogenic lineage. The transcription factors and gene expressions determining myogenic differentiation (MYOD1, MYOG, MYF5, and MRF4) increased, while the expression of osteogenic differentiation factors (BMP2, BMP4, RUNX2, SPP1, and OCN) and adipogenic differentiation factors (CEBPB, LPL, and AP2 (FABP4)) was reduced or did not change. The stimulation of autophagy may be one of the factors contributing to the increased expression of myogenic differentiation genes in MSCs. Autophagy may be caused by intracellular alkalosis and/or short-term intracellular oxidative stress.

Water-Promoted Reaction of C60Ar5Cl Compounds with Thiophenes Delivers a Family of Multifunctional Fullerene Derivatives with Selective Antiviral Properties.

Here we report a reaction of the fullerene derivatives C60Ar5Cl, which enables the substitution of Cl with thiophene residues and the formation of the novel family of C1-symmetrical C60 fullerene derivatives with six functional addends C60Ar5Th. The discovered reaction provided a straightforward approach to the synthesis of previously inaccessible multifunctional water-soluble fullerene derivatives, including the compounds with antiviral activity against human immunodeficiency and influenza viruses.