Ionic-Liquid-Assisted Synthesis of Mixed-Phase Manganese Oxide Nanorods for a High-Performance Aqueous Zinc-Ion Battery.

Aqueous zinc-ion batteries (ZIBs) provide a safer and cost-effective energy storage solution by utilizing nonflammable water-based electrolytes. Although many research efforts are focused on optimizing zinc anode materials, developing suitable cathode materials is still challenging. In this study, one-dimensional, mixed-phase MnO2 nanorods are synthesized using ionic liquid (IL). Here, the IL acts as a structure-directing agent that modifies MnO2 morphology and introduces mixed phases, as confirmed by morphological, structural, and X-ray photoelectron spectroscopy (XPS) studies. The MnO2 nanorods developed by this method are utilized as a cathode material for ZIB application in the coin-cell configuration. As expected, Zn//MnO2 nanorods show a significant increase in their capacity to 347 Wh kg-1 at 100 mA g-1, which is better than bare MnO2 nanowires (207.1 Wh kg-1) synthesized by the chemical precipitation method. The battery is highly rechargeable and maintains good retention of 86% of the initial capacity and 99% Coulombic efficiency after 800 cycles at 1000 mA g-1. The ex situ XPS, X-ray diffraction, and in-depth electrochemical analysis confirm that MnO6 octahedra experience insertion/extraction of Zn2+ with high reversibility. This study suggests the potential use of MnO2 nanorods to develop high-performance and durable battery electrode materials suitable for large-scale applications.

Improving the photoelectrochemical water splitting performance of CuO photocathodes using a protective CuBi2O4 layer.

A heterojunction photocathode of CuO and CuBi2O4 grown on an FTO substrate (FTO/CuO/CuBi2O4) was synthesized using hydrothermal method followed by spin coating and annealing to overcome the bottlenecks encountered by CuO in photoelectrochemical (PEC) water splitting application. The synthesis methods, morphological, structural properties, and composition of each sample under each synthesis condition are discussed in detail. The photocathode with 15 coating layers annealed at 450 °C exhibited the best PEC performance. Moreover, its current density reached 1.23 mA/cm2 under an applied voltage of - 0.6 V versus Ag/AgCl in a neutral electrolyte. Additionally, it exhibited higher stability than the bare CuO thin film. The bonding of CuBi2O4 on CuO resulted in close contact between the two semiconductors, helping the semiconductors support each other to increase the PEC efficiency of the photocathode. CuO acted as the electron-generating layer, and the CuBi2O4 layer helped minimize photocorrosion as well as transport the carriers to the electrode/electrolyte interface to accomplish the hydrogen evolution reaction.

A Novel Synthesized 1D Nanobelt-like Cobalt Phosphate Electrode Material for Excellent Supercapacitor Applications.

In the present report, we synthesized highly porous 1D nanobelt-like cobalt phosphate (Co2P2O7) materials using a hydrothermal method for supercapacitor (SC) applications. The physicochemical and electrochemical properties of the synthesized 1D nanobelt-like Co2P2O7 were investigated using X-ray diffraction (XRD), X-ray photoelectron (XPS) spectroscopy, and scanning electron microscopy (SEM). The surface morphology results indicated that the deposition temperatures affected the growth of the 1D nanobelts. The SEM revealed a significant change in morphological results of Co2P2O7 material prepared at 150 °C deposition temperature. The 1D Co2P2O7 nanobelt-like nanostructures provided higher electrochemical properties, because the resulting empty space promotes faster ion transfer and improves cycling stability. Moreover, the electrochemical performance indicates that the 1D nanobelt-like Co2P2O7 electrode deposited at 150 °C deposition temperature shows the maximum specific capacitance (Cs). The Co2P2O7 electrode prepared at a deposition temperature 150 °C provided maximum Cs of 1766 F g-1 at a lower scan rate of 5 mV s-1 in a 1 M KOH electrolyte. In addition, an asymmetric hybrid Co2P2O7//AC supercapacitor device exhibited the highest Cs of 266 F g-1, with an excellent energy density of 83.16 Wh kg-1, and a power density of 9.35 kW kg-1. Additionally, cycling stability results indicate that the 1D nanobelt-like Co2P2O7 material is a better option for the electrochemical energy storage application.

Polyaniline-wrapped MnMoO4 as an active catalyst for hydrogen production by electrochemical water splitting.

Developing efficient, low-cost, and environment-friendly electrocatalysts for hydrogen generation is critical for lowering energy usage in electrochemical water splitting. Moreover, for commercialization, fabricating cost-efficient, earth-abundant electrocatalysts with superior characteristics is of urgent need. Towards this endeavor, we report the synthesis of PANI-MnMoO4 nanocomposites using a hydrothermal approach and an in situ polymerization method with various concentrations of MnMoO4. The fabricated nanocomposite electrocatalyst exhibits bifunctional electrocatalytic activity towards the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) at a lower overpotential of 410 mV at 30 mA cm-2 and 155 mV at 10 mA cm-2, respectively in an alkaline electrolyte. Furthermore, while showing overall water splitting (OWS) performance, the optimized PM-10 (PANI-MnMoO4) electrode reveals the most outstanding OWS performance with a lower cell voltage of 1.65 V (vs. RHE) at a current density of 50 mA cm-2 with an excellent long-term cell resilience of 24 h.

Improvement of Vacuum Free Hybrid Photovoltaic Performance Based on a Well-Aligned ZnO Nanorod and WO3 as a Carrier Transport Layer.

Well-aligned zinc oxide nanorods (WA-ZnO Nrods) with different lengths were synthesized and the effects of the growth times on the optical, morphological, and electrical properties of the WA-ZnO Nrods were examined. We also investigated the application of WA-ZnO Nrods as an electron transport layer (ETL) and tungsten trioxide (WO3) as a hole transport layer (HTL) to vacuum free hybrid photovoltaic (HPV) performance. The eutectic gallium-indium (EGaIn) alloy was used as a top electrode coated using a brush-painting method. A device with the structure of indium tin oxide (ITO)/WA-ZnO Nrods/(P3HT:PCBM)/WO3/EGaIn was optimized and fabricated. The maximum power conversion efficiency (PCE) was ~4.5%. Improvement of the device performance indicates that the well-aligned ZnO Nrods and WO3 can effectively be applied as charge carrier transport layer for vacuum free hybrid (HPV).