BMP2 expression in the endocardial lineage is required for AV endocardial cushion maturation and remodeling.

Distal outgrowth, maturation and remodeling of the endocardial cushion mesenchyme in the atrioventricular (AV) canal are the essential morphogenetic events during four-chambered heart formation. Mesenchymalized AV endocardial cushions give rise to the AV valves and the membranous ventricular septum (VS). Failure of these processes results in several human congenital heart defects. Despite this clinical relevance, the mechanisms governing how mesenchymalized AV endocardial cushions mature and remodel into the membranous VS and AV valves have only begun to be elucidated. The role of BMP signaling in the myocardial and secondary heart forming lineage has been well studied; however, little is known about the role of BMP2 expression in the endocardial lineage. To fill this knowledge gap, we generated Bmp2 endocardial lineage-specific conditional knockouts (referred to as Bmp2 cKOEndo) by crossing conditionally-targeted Bmp2flox/flox mice with a Cre-driver line, Nfatc1Cre, wherein Cre-mediated recombination was restricted to the endocardial cells and their mesenchymal progeny. Bmp2 cKOEndo mouse embryos did not exhibit failure or delay in the initial AV endocardial cushion formation at embryonic day (ED) 9.5-11.5; however, significant reductions in AV cushion size were detected in Bmp2 cKOEndo mouse embryos when compared to control embryos at ED13.5 and ED16.5. Moreover, deletion of Bmp2 from the endocardial lineage consistently resulted in membranous ventricular septal defects (VSDs), and mitral valve deficiencies, as evidenced by the absence of stratification of mitral valves at birth. Muscular VSDs were not found in Bmp2 cKOEndo mouse hearts. To understand the underlying morphogenetic mechanisms leading to a decrease in cushion size, cell proliferation and cell death were examined for AV endocardial cushions. Phospho-histone H3 analyses for cell proliferation and TUNEL assays for apoptotic cell death did not reveal significant differences between control and Bmp2 cKOEndo in AV endocardial cushions. However, mRNA expression of the extracellular matrix components, versican, Has2, collagen 9a1, and periostin was significantly reduced in Bmp2 cKOEndo AV cushions. Expression of transcription factors implicated in the cardiac valvulogenesis, Snail2, Twist1 and Sox9, was also significantly reduced in Bmp2 cKOEndo AV cushions. These data provide evidence that BMP2 expression in the endocardial lineage is essential for the distal outgrowth, maturation and remodeling of AV endocardial cushions into the normal membranous VS and the stratified AV valves.

A three dimensional nerve map of human bladder trigone.

AIM: Central efferent and afferent neural pathways to and from the human urinary bladder are well-characterized, but the location and arborization of these nerves as they traverse the serosa, muscularis, and urothelial layers are not clearly defined. The purpose of this study was to create a three dimensional map of the innervation of the human bladder trigone from the extrinsic perivesical adventitial nerve trunks to the urothelium. METHODS: A male and a female human bladder were harvested from fresh frozen cadavers and fixed in formalin. The bladder neck and trigone region were serially sectioned (5 µm) and every 20th slide was stained (S100), scanned and aligned to create 3D maps. RESULTS: Nerve penetration into the detrusor muscle occurs with the highest frequency at the bladder neck and interureteric ridge. Nerves traveling parallel to the bladder lumen do so in the adventitia, beyond the outer border of detrusor. In females, the depth of these nerve bands is uniform at 0.7-1.7 cm below the luminal surface, the outer limits of which include the anterior vaginal wall. In the male, depth is more variable owing to detrusor hypertrophy with the minimum depth of nerves approximately 0.5 cm near the interureteric ridge and over 1 cm near the bladder neck. CONCLUSIONS: Myelinated neural pathways traversing in the human bladder in the region of the trigone have a discreet regional density. This 3D map of trigonal innervation may provide guidance to more precisely direct therapies for urinary incontinence or pelvic pain. Neurourol. Urodynam. 36:1015-1019, 2017. © 2016 Wiley Periodicals, Inc.

Development of peptide-functionalized synthetic hydrogel microarrays for stem cell and tissue engineering applications.

Synthetic polymer microarray technology holds remarkable promise to rapidly identify suitable biomaterials for stem cell and tissue engineering applications. However, most of previous microarrayed synthetic polymers do not possess biological ligands (e.g., peptides) to directly engage cell surface receptors. Here, we report the development of peptide-functionalized hydrogel microarrays based on light-assisted copolymerization of poly(ethylene glycol) diacrylates (PEGDA) and methacrylated-peptides. Using solid-phase peptide/organic synthesis, we developed an efficient route to synthesize methacrylated-peptides. In parallel, we identified PEG hydrogels that effectively inhibit non-specific cell adhesion by using PEGDA-700 (M. W.=700) as a monomer. The combined use of these chemistries enables the development of a powerful platform to prepare peptide-functionalized PEG hydrogel microarrays. Additionally, we identified a linker composed of 4 glycines to ensure sufficient exposure of the peptide moieties from hydrogel surfaces. Further, we used this system to directly compare cell adhesion abilities of several related RGD peptides: RGD, RGDS, RGDSG and RGDSP. Finally, we combined the peptide-functionalized hydrogel technology with bioinformatics to construct a library composed of 12 different RGD peptides, including 6 unexplored RGD peptides, to develop culture substrates for hiPSC-derived cardiomyocytes (hiPSC-CMs), a cell type known for poor adhesion to synthetic substrates. 2 out of 6 unexplored RGD peptides showed substantial activities to support hiPSC-CMs. Among them, PMQKMRGDVFSP from laminin ß4 subunit was found to support the highest adhesion and sarcomere formation of hiPSC-CMs. With bioinformatics, the peptide-functionalized hydrogel microarrays accelerate the discovery of novel biological ligands to develop biomaterials for stem cell and tissue engineering applications. STATEMENT OF SIGNIFICANCE: In this manuscript, we described the development of a robust approach to prepare peptide-functionalized synthetic hydrogel microarrays. Combined with bioinformatics, this technology enables us to rapidly identify novel biological ligands for the development of the next generation of functional biomaterials for stem cell and tissue engineering applications.

Alk3 mediated Bmp signaling controls the contribution of epicardially derived cells to the tissues of the atrioventricular junction.

Recent studies using mouse models for cell fate tracing of epicardial derived cells (EPDCs) have demonstrated that at the atrioventricular (AV) junction EPDCs contribute to the mesenchyme of the AV sulcus, the annulus fibrosus, and the parietal leaflets of the AV valves. There is little insight, however, into the mechanisms that govern the contribution of EPDCs to these tissues. While it has been demonstrated that bone morphogenetic protein (Bmp) signaling is required for AV cushion formation, its role in regulating EPDC contribution to the AV junction remains unexplored. To determine the role of Bmp signaling in the contribution of EPDCs to the AV junction, the Bmp receptor activin-like kinase 3 (Alk3; or Bmpr1a) was conditionally deleted in the epicardium and EPDCs using the mWt1/IRES/GFP-Cre (Wt1(Cre)) mouse. Embryonic Wt1(Cre);Alk3(fl/fl) specimens showed a significantly smaller AV sulcus and a severely underdeveloped annulus fibrosus. Electrophysiological analysis of adult Wt1(Cre);Alk3(fl/fl) mice showed, unexpectedly, no ventricular pre-excitation. Cell fate tracing revealed a significant decrease in the number of EPDCs within the parietal leaflets of the AV valves. Postnatal Wt1(Cre);Alk3(fl/fl) specimens showed myxomatous changes in the leaflets of the mitral valve. Together these observations indicate that Alk3 mediated Bmp signaling is important in the cascade of events that regulate the contribution of EPDCs to the AV sulcus, annulus fibrosus, and the parietal leaflets of the AV valves. Furthermore, this study shows that EPDCs do not only play a critical role in early developmental events at the AV junction, but that they also are important in the normal maturation of the AV valves.

Engineering alginate as bioink for bioprinting.

Recent advances in three-dimensional (3-D) printing offer an excellent opportunity to address critical challenges faced by current tissue engineering approaches. Alginate hydrogels have been used extensively as bioinks for 3-D bioprinting. However, most previous research has focused on native alginates with limited degradation. The application of oxidized alginates with controlled degradation in bioprinting has not been explored. Here, a collection of 30 different alginate hydrogels with varied oxidation percentages and concentrations was prepared to develop a bioink platform that can be applied to a multitude of tissue engineering applications. The authors systematically investigated the effects of two key material properties (i.e. viscosity and density) of alginate solutions on their printabilities to identify a suitable range of material properties of alginates to be applied to bioprinting. Further, four alginate solutions with varied biodegradability were printed with human adipose-derived stem cells (hADSCs) into lattice-structured, cell-laden hydrogels with high accuracy. Notably, these alginate-based bioinks were shown to be capable of modulating proliferation and spreading of hADSCs without affecting the structure integrity of the lattice structures (except the highly degradable one) after 8days in culture. This research lays a foundation for the development of alginate-based bioink for tissue-specific tissue engineering applications.

3D printing facilitated scaffold-free tissue unit fabrication.

Tissue spheroids hold great potential in tissue engineering as building blocks to assemble into functional tissues. To date, agarose molds have been extensively used to facilitate fusion process of tissue spheroids. As a molding material, agarose typically requires low temperature plates for gelation and/or heated dispenser units. Here, we proposed and developed an alginate-based, direct 3D mold-printing technology: 3D printing microdroplets of alginate solution into biocompatible, bio-inert alginate hydrogel molds for the fabrication of scaffold-free tissue engineering constructs. Specifically, we developed a 3D printing technology to deposit microdroplets of alginate solution on calcium containing substrates in a layer-by-layer fashion to prepare ring-shaped 3D hydrogel molds. Tissue spheroids composed of 50% endothelial cells and 50% smooth muscle cells were robotically placed into the 3D printed alginate molds using a 3D printer, and were found to rapidly fuse into toroid-shaped tissue units. Histological and immunofluorescence analysis indicated that the cells secreted collagen type I playing a critical role in promoting cell-cell adhesion, tissue formation and maturation.

Scaffold-free tissue engineering: organization of the tissue cytoskeleton and its effects on tissue shape.

Work described herein characterizes tissues formed using scaffold-free, non-adherent systems and investigates their utility in modular approaches to tissue engineering. Immunofluorescence analysis revealed that all tissues formed using scaffold-free, non-adherent systems organize tissue cortical cytoskeletons that appear to be under tension. Tension in these tissues was also evident when modules (spheroids) were used to generate larger tissues. Real-time analysis of spheroid fusion in unconstrained systems illustrated modular motion that is compatible with alterations in tensions, due to the process of disassembly/reassembly of the cortical cytoskeletons required for module fusion. Additionally, tissues generated from modules placed within constrained linear molds, which restrict modular motion, deformed upon release from molds. That tissue deformation is due in full or in part to imbalanced cortical actin cytoskeleton tensions resulting from the constraints imposed by mold systems is suggested from our finding that treatment of forming tissues with Y-27632, a selective inhibitor of ROCK phosphorylation, reduced tissue deformation. Our studies suggest that the deformation of scaffold-free tissues due to tensions mediated via the tissue cortical cytoskeleton represents a major and underappreciated challenge to modular tissue engineering.

Cellularized microcarriers as adhesive building blocks for fabrication of tubular tissue constructs.

To meet demands of vascular reconstruction, there is a need for prosthetic alternatives to natural blood vessels. Here we explored a new conduit fabrication approach. Macroporous, gelatin microcarriers laden with human umbilical vein endothelial cells and aortic smooth muscle cells were dispensed into tubular agarose molds and found to adhere to form living tubular tissues. The ability of cellularized microcarriers to adhere to one another involved cellular and extracellular matrix bridging that included the formation of epithelium-like cell layers lining the lumenal and ablumenal surfaces of the constructs and the deposition of collagen and elastin fibers. The tubular tissues behaved as elastic solids, with a uniaxial mechanical response that is qualitatively similar to that of native vascular tissues and consistent with their elastin and collagen composition. Linearized measures of the mechanical response of the fabricated tubular tissues at both low and high strains were observed to increase with duration of static culture, with no significant loss of stiffness following decellularization. The findings highlight the utility of cellularized macroporous gelatin microcarriers as self-adhering building blocks for the fabrication of living tubular structures.

Patterns of muscular strain in the embryonic heart wall.

The hypothesis that inner layers of contracting muscular tubes undergo greater strain than concentric outer layers was tested by numerical modeling and by confocal microscopy of strain within the wall of the early chick heart. We modeled the looped heart as a thin muscular shell surrounding an inner layer of sponge-like trabeculae by two methods: calculation within a two-dimensional three-variable lumped model and simulated expansion of a three-dimensional, four-layer mesh of finite elements. Analysis of both models, and correlative microscopy of chamber dimensions, sarcomere spacing, and membrane leaks, indicate a gradient of strain decreasing across the wall from highest strain along inner layers. Prediction of wall thickening during expansion was confirmed by ultrasonography of beating hearts. Degree of stretch determined by radial position may thus contribute to observed patterns of regional myocardial conditioning and slowed proliferation, as well as to the morphogenesis of ventricular trabeculae and conduction fascicles. Developmental Dynamics 238:1535-1546, 2009. (c) 2009 Wiley-Liss, Inc.

Cartilage link protein 1 (Crtl1), an extracellular matrix component playing an important role in heart development.

To expand our insight into cardiac development, a comparative DNA microarray analysis was performed using tissues from the atrioventricular junction (AVJ) and ventricular chambers of mouse hearts at embryonic day (ED) 10.5-11.0. This comparison revealed differential expression of approximately 200 genes, including cartilage link protein 1 (Crtl1). Crtl1 stabilizes the interaction between hyaluronan (HA) and versican, two extracellular matrix components essential for cardiac development. Immunohistochemical studies showed that, initially, Crtl1, versican, and HA are co-expressed in the endocardial lining of the heart, and in the endocardially derived mesenchyme of the AVJ and outflow tract (OFT). At later stages, this co-expression becomes restricted to discrete populations of endocardially derived mesenchyme. Histological analysis of the Crtl1-deficient mouse revealed a spectrum of cardiac malformations, including AV septal and myocardial defects, while expression studies showed a significant reduction in versican levels. Subsequent analysis of the hdf mouse, which carries an insertional mutation in the versican gene (CSPG2), demonstrated that haploinsufficient versican mice display septal defects resembling those seen in Crtl1(-/-) embryos, suggesting that reduced versican expression may contribute to a subset of the cardiac abnormalities observed in the Crtl1(-/-) mouse. Combined, these findings establish an important role for Crtl1 in heart development.

A spatiotemporal evaluation of the contribution of the dorsal mesenchymal protrusion to cardiac development.

The mesenchymal tissues involved in cardiac septation are derived from different sources. In addition to endocardial-derived mesenchyme, the heart also receives contributions from the neural crest, the proepicardium, and the dorsal mesenchymal protrusion (DMP). Whereas the contributions of the neural crest and proepicardium have been thoroughly studied, the DMP has received little attention. Here, we present the results of a comprehensive spatiotemporal study of the DMP in cardiac development. Using the Tie2-Cre mouse, immunohistochemistry, and AMIRA reconstructions, we show that the DMP, in combination with the mesenchymal cap on the primary atrial septum, fuse with the major atrioventricular cushions to close the primary atrial foramen and to form the atrioventricular mesenchymal complex. In this complex, the DMP constitutes a discrete prominent mesenchymal component, wedged in between the major cushions. This new model for atrioventricular septation may provide novel insights into understanding the etiology of congenital cardiac malformations.

Changes in activation sequence of embryonic chick atria correlate with developing myocardial architecture.

To characterize developmental changes in impulse propagation within atrial musculature, we performed high-speed optical mapping of activation sequence of the developing chick atria using voltage-sensitive dye. The activation maps were correlated with detailed morphological studies using scanning electron microscopy, histology, and whole mount confocal imaging with three-dimensional reconstruction. A preferential pathway appeared during development within the roof of the atria, transmitting the impulse rapidly from the right-sided sinoatrial node to the left atrium. The morphological substrate of this pathway, the bundle of Bachman, apparent from stage 29 onward, was a prominent ridge of pectinate muscles continuous with the terminal crest. Further acceleration of impulse propagation was noted along the ridges formed by the developing pectinate muscles, ramifying from the terminal crest toward the atrioventricular groove. In contrast, when the impulse reached the interatrial septum, slowing was often observed, suggesting that the septum acts as a barrier or sink for electrical current. We conclude that these inhomogeneities in atrial impulse propagation are consistent with existence of a specialized network of fast-conducting tissues. The purpose of these preferential pathways appears to be to assure synchronous atrial activation and contraction rather than rapid impulse conduction between the sinoatrial and atrioventricular nodes.

Left-right lineage analysis of the embryonic Xenopus heart reveals a novel framework linking congenital cardiac defects and laterality disease.

The significant morbidity and mortality associated with laterality disease almost always are attributed to complex congenital heart defects (CHDs), reflecting the extreme susceptibility of the developing heart to disturbances in the left-right (LR) body plan. To determine how LR positional information becomes ;translated' into anatomical asymmetry, left versus right side cardiomyocyte cell lineages were traced in normal and laterality defective embryos of the frog, Xenopus laevis. In normal embryos, myocytes in some regions of the heart were derived consistently from a unilateral lineage, whereas other regions were derived consistently from both left and right side lineages. However, in heterotaxic embryos experimentally induced by ectopic activation or attenuation of ALK4 signaling, hearts contained variable LR cell composition, not only compared with controls but also compared with hearts from other heterotaxic embryos. In most cases, LR cell lineage defects were associated with abnormal cardiac morphology and were preceded by abnormal Pitx2c expression in the lateral plate mesoderm. In situs inversus embryos there was a mirror image reversal in Pitx2c expression and LR lineage composition. Surprisingly, most of the embryos that failed to develop heterotaxy or situs inversus in response to misregulated ALK4 signaling nevertheless had altered Pitx2c expression, abnormal cardiomyocyte LR lineage composition and abnormal heart structure, demonstrating that cardiac laterality defects can occur even in instances of otherwise normal body situs. These results indicate that: (1) different regions of the heart contain distinct LR myocyte compositions; (2) LR cardiomyocyte lineages and Pitx2c expression are altered in laterality defective embryos; and (3) abnormal LR cardiac lineage composition frequently is associated with cardiac malformations. We propose that proper LR cell composition is necessary for normal morphogenesis, and that misallocated LR cell lineages may be causatively linked with CHDs that are present in heterotaxic individuals, as well as some 'isolated' CHDs that are found in individuals lacking overt features of laterality disease.

Left-right lineage analysis of AV cushion tissue in normal and laterality defective Xenopus hearts.

The majority of complex congenital heart defects occur in individuals who are afflicted by laterality disease. We hypothesize that the prevalence of valvuloseptal defects in this population is due to defective left-right patterning of the embryonic atrioventricular (AV) canal cushions, which are the progenitor tissue for valve and septal structures in the mature heart. Using embryos of the frog Xenopus laevis, this hypothesis was tested by performing left-right lineage analysis of myocytes and cushion mesenchyme cells of the superior and inferior cushion regions of the AV canal. Lineage analyses were conducted in both wild-type and laterality mutant embryos experimentally induced by misexpression of ALK4, a type I TGF-beta receptor previously shown to modulate left-right axis determination in Xenopus. We find that abnormalities in overall amount and left-right cell lineage composition are present in a majority of ALK4-induced laterality mutant embryos and that much variation in the nature of these abnormalities exists in embryos that exhibit the same overall body situs. We propose that these two parameters of cushion tissue formation-amount and left-right lineage origin-are important for normal processes of valvuloseptal morphogenesis and that defective allocation of cells in the AV canal might be causatively linked to the high incidence of valvuloseptal defects associated with laterality disease.

Confocal imaging of the embryonic heart: how deep?

Confocal microscopy allows for optical sectioning of tissues, thus obviating the need for physical sectioning and subsequent registration to obtain a three-dimensional representation of tissue architecture. However, practicalities such as tissue opacity, light penetration, and detector sensitivity have usually limited the available depth of imaging to 200 microm. With the emergence of newer, more powerful systems, we attempted to push these limits to those dictated by the working distance of the objective. We used whole-mount immunohistochemical staining followed by clearing with benzyl alcohol-benzyl benzoate (BABB) to visualize three-dimensional myocardial architecture. Confocal imaging of entire chick embryonic hearts up to a depth of 1.5 mm with voxel dimensions of 3 microm was achieved with a 10x dry objective. For the purpose of screening for congenital heart defects, we used endocardial painting with fluorescently labeled poly-L-lysine and imaged BABB-cleared hearts with a 5x objective up to a depth of 2 mm. Two-photon imaging of whole-mount specimens stained with Hoechst nuclear dye produced clear images all the way through stage 29 hearts without significant signal attenuation. Thus, currently available systems allow confocal imaging of fixed samples to previously unattainable depths, the current limiting factors being objective working distance, antibody penetration, specimen autofluorescence, and incomplete clearing.

Mouse models for cardiac conduction system development.

The mouse is the animal of choice for the study of molecular mechanisms involved in the regulation of cardiovascular morphogenesis and function. Recently, a series of genetically engineered mouse models have been reported (e.g. cGATA6/lacZ, MinK/lacZ knock-in/knock-out, engrailed2/lacZ, Cardiac troponin I/lacZ) that provide new and exciting information on the development of the atrioventricular conduction system (AVCS). On the basis of these and ongoing studies, concepts for the formation of the AVCS are continuously being adjusted. A proper understanding of the normal developmental mechanisms underlying the cardiac remodelling leading to the formation of the AVCS is imperative for the interpretation of cardiac abnormalities, including conduction disturbances, as observed in some genetically perturbed (knockout) mice. In this paper information on murine AVCS development will be integrated with published and unpublished results from studies in other vertebrates, including human and rabbit. We will illustrate that although many pieces of the puzzle still remain to be gathered, the outline of a very complex and critical event in cardiac morphogenesis is slowly emerging. Specifically, we will re-evaluate the concept of the 'primary ring' in the context of the new insights in the development of the AV junction as provided by the respective mouse models described above.