Polymer-Assisted Dispersion of Boron Nitride/Graphene in a Thermoplastic Polyurethane Hybrid for Cooled Smart Clothes.

The avoidance and mitigation of energy wastage have attracted increasing attention in the context of global warming and climate change. With advances in materials science, diverse multifunctional materials with high thermal conductivity have shown excellent energy-saving potential. In this study, a hybrid film exhibiting high thermal conductivity with excellent stretchability and washability was prepared. First, a simple surface modification of boron nitride (BN) was performed to realize a modified boron nitride (BNOH) filler. Next, an organic dispersant was synthesized to enhance the dispersion of BNOH and graphene nanoplatelets (GNPs) in the proposed composite. Subsequently, a simple procedure was used to combine the dispersed GNPs and BNOH fillers with thermoplastic polyurethane (TPU) to fabricate a hybrid structure. The hybrid films composed of BNOH-GNP/TPU with a dispersant exhibited a high thermal conductivity of 12.62 W m-1 K-1 at a low filler loading of 20 wt.%. This hybrid film afforded excellent stretchability and washability, as indicated by the very small thermal-conductivity reduction to only 12.23 W m-1 K-1 after 100 cycles of fatigue testing and to 12.01 W m-1 K-1 after 10 washing cycles. Furthermore, the cooling and hydrophobicity properties of the hybrid film were enhanced when compared with neat TPU. Overall, our approach demonstrates a simple and novel strategy to break the passive effect of traditional commercial cooling clothing by combining a high-thermal-conductivity film with an active cooling source to amplify the cooling effect and develop wearable cooled smart clothes with great commercial potential.

Second Harmonic Light Manipulation with Vertical Split Ring Resonators.

The second harmonic generation (SHG) of vertical and planar split-ring resonators (SRRs) that are broken centro-symmetry configurations at the interface of metal surface and air is investigated. Strong interactions, better electromagnetic field confinements, and less leakage into the substrate for vertical SRRs are found. Experimental results show a 2.6-fold enhancement of SHG nonlinearity, which is in good agreement with simulations and calculations. Demonstrations of 3D metastructures and vertical SRRs with strong SHG nonlinearity majorly result from magnetic dipole and electric quadrupole clearly provides potential applications for photonics and sensing.

Vacuum Ultraviolet Light-Generating Metasurface.

Vacuum ultraviolet (VUV) light has important applications in many fields, ranging from device fabrication to photochemistry, from environmental remediation to microscopy and spectroscopy. Methods to produce coherent VUV light frequently utilize high harmonic generation in media such as rare gases or atomic vapors; nonlinear optical crystals that support second harmonic generation into the VUV are quite rare. Here, we demonstrate an all-dielectric metasurface designed for the nonlinear optical generation of VUV light. Consisting of an array of zinc oxide nanoresonators, the device exhibits a magnetic dipole resonance at a wavelength of 394 nm. When excited with ultrafast laser pulses at this wavelength, the second harmonic at 197 nm is readily generated. Manipulation of the metasurface design enables control over the radiation pattern. This work has the potential to open the door toward simple and compact VUV sources for new applications.

Material-assisted metamaterial: a new dimension to create functional metamaterial.

A high Q-value reflective type metasurface consisting of 1D Au nanorods, a SiO2 spacer and a Au back reflector is demonstrated. It is shown that the sideband of the resonant mode can be suppressed as the resonant wavelength close to the phonon absorption of SiO2. By combining both designed structured resonance and inherent property of the based materials, a low angle-dependent metasurface with a Q-value of 40 has been demonstrated. The proposed structure will be useful for high sensitivity sensing and narrow band thermal emitter.

Versatile Polarization Generation with an Aluminum Plasmonic Metasurface.

All forms of light manipulation rely on light-matter interaction, the primary mechanism of which is the modulation of its electromagnetic fields by the localized electromagnetic fields of atoms. One of the important factors that influence the strength of interaction is the polarization of the electromagnetic field. The generation and manipulation of light polarization have been traditionally accomplished with bulky optical components such as waveplates, polarizers, and polarization beam splitters that are optically thick. The miniaturization of these devices is highly desirable for the development of a new class of compact, flat, and broadband optical components that can be integrated together on a single photonics chip. Here we demonstrate, for the first time, a reflective metasurface polarization generator (MPG) capable of producing light beams of any polarizations all from a linearly polarized light source with a single optically thin chip. Six polarization light beams are achieved simultaneously including four linear polarizations along different directions and two circular polarizations, all conveniently separated into different reflection angles. With the Pancharatnam-Berry phase-modulation method, the MPG sample was fabricated with aluminum as the plasmonic metal instead of the conventional gold or silver, which allowed for its broadband operation covering the entire visible spectrum. The versatility and compactness of the MPG capable of transforming any incident wave into light beams of arbitrary polarizations over a broad spectral range are an important step forward in achieving a complete set of flat optics for integrated photonics with far-reaching applications.

Integrated plasmonic metasurfaces for spectropolarimetry.

Plasmonic metasurfaces enable simultaneous control of the phase, momentum, amplitude and polarization of light and hence promise great utility in realization of compact photonic devices. In this paper, we demonstrate a novel chip-scale device suitable for simultaneous polarization and spectral measurements through use of six integrated plasmonic metasurfaces (IPMs), which diffract light with a given polarization state and spectral component into well-defined spatial domains. Full calibration and characterization of our device is presented, whereby good spectral resolution and polarization accuracy over a wavelength range of 500-700 nm is shown. Functionality of our device in a Müller matrix modality is demonstrated through determination of the polarization properties of a commercially available variable waveplate. Our proposed IPM is robust, compact and can be fabricated with a single photolithography step, promising many applications in polarization imaging, quantum communication and quantitative sensing.

Ultrafast Thermal Nonlinearity.

Third order nonlinear optical phenomena explored in the last half century have been predicted to find wide range of applications in many walks of life, such as all-optical switching, routing, and others, yet this promise has not been fulfilled primarily because the strength of nonlinear effects is too low when they are to occur on the picosecond scale required in today's signal processing applications. The strongest of the third-order nonlinearities, engendered by thermal effects, is considered to be too slow for the above applications. In this work we show that when optical fields are concentrated into the volumes on the scale of few tens of nanometers, the speed of the thermo-optical effects approaches picosecond scale. Such a sub-diffraction limit concentration of field can be accomplished with the use of plasmonic effects in metal nanoparticles impregnating the thermo-optic dielectric (e.g. amorphous Si) and leads to phase shifts sufficient for all optical switching on ultrafast scale.

Aluminum plasmonic multicolor meta-hologram.

We report a phase-modulated multicolor meta-hologram (MCMH) that is polarization-dependent and capable of producing images in three primary colors. The MCMH structure is made of aluminum nanorods that are arranged in a two-dimensional array of pixels with surface plasmon resonances in red, green, and blue. The aluminum nanorod array is patterned on a 30 nm thick SiO2 spacer layer sputtered on top of a 130 nm thick aluminum mirror. With proper design of the structure, we obtain resonances of narrow bandwidths to allow for implementation of the multicolor scheme. Taking into account of the wavelength dependence of the diffraction angle, we can project images to specific locations with predetermined size and order. With tuning of aluminum nanorod size, we demonstrate that the image color can be continuously varied across the visible spectrum.

Selective trapping or rotation of isotropic dielectric microparticles by optical near field in a plasmonic archimedes spiral.

We demonstrate selective trapping or rotation of optically isotropic dielectric microparticles by plasmonic near field in a single gold plasmonic Archimedes spiral. Depending on the handedness of circularly polarized excitation, plasmonic near fields can be selectively engineered into either a focusing spot for particle trapping or a plasmonic vortex for particle rotation. Our design provides a simple solution for subwavelength optical manipulation and may find applications in micromechanical and microfluidic systems.

Molecular cloning, structural analysis and mass spectrometric identification of native dioscorins of various yam species.

BACKGROUND: Dioscorins are the major storage proteins of yam tubers. However, the molecular nature of their heterogeneity in tubers has not been fully elucidated. In this study the authors isolated the dioscorin gene families of Dioscorea japonica and Dioscorea pseudojaponica, performed matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF-MS) and elucidated which dioscorin isoforms are the major constituents in tubers. RESULTS: The dioscorin gene families of D. japonica (Dj-dioA1-Dj-dioA4, Dj-dioB1 and Dj-dioB2) and D. pseudojaponica (Dp-dioA1-Dp-dioA5 and Dp-dioB1) were cloned from cDNA libraries of yam tubers. The dioscorins isolated from Dioscorea alata (Da-dioscorins), D. japonica (Dj-dioscorins) and D. pseudojaponica (Dp-dioscorins) were mainly monomers, with a few dimers. The monomers contained one intramolecular disulfide bond (Cys(28)-Cys(187)) and belonged to Class A dioscorins with two cysteine residues. The dimers consisted of Class B dioscorins with one intermolecular disulfide bond (Cys(40)-Cys(40)). Results of MALDI-TOF-MS revealed that the Da-dioscorins were mainly encoded by Da-dioA2, Da-dioA3 and Da-dioA4. The majority of the Dj-dioscorins were encoded by Dj-dioA1, Dj-dioA2, Dj-dioA3 and Dj-dioB2. The Dp-dioscorins mainly comprised proteins encoded by Dp-dioA1, Dp-dioA3, Dp-dioA4, Dp-dioB1 and Dp-dioB2. CONCLUSION: Determination of the constituents of dioscorin isoforms in yam tubers provides a basis for future studies of their physiological and biomedical functions.

Recombinant dioscorins of the yam storage protein expressed in Escherichia coli exhibit antioxidant and immunomodulatory activities.

Dioscorins, the major storage proteins in yam tubers, exhibit biochemical and immunomodulatroy activities. To investigate the potential application of dioscorins in biomedical research, we expressed the dioscorin genes Dj-dioA3 and Dp-dioA2 from Dioscorea japonica and Dioscorea pseudojaponica, respectively, in E. coli and routinely obtained approximately 15 mg proteins per liter Escherichia coli culture (mg/L) to 30 mg/L of rDj-dioscorinA3 and 4 to 8 mg/L of rDp-dioscorinA2. Western blot analyses revealed that both recombinant dioscorins contained epitopes with similar antigenicities to those of the native dioscorins. Results from dithiothreitol (DTT) treatment followed by monobromobimane (mBBr) staining showed that both recombinant dioscorins, like the native dioscorins, contain an intramolecular disulfide bond between Cys(28) and Cys(187) residues. Circular dichroism spectroscopy findings indicated that the secondary structural contents of the recombinant dioscorins showed high similarity to those of their corresponding native dioscorins. Both recombinant dioscorins, like the native dioscorins, exhibited 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and Toll-like receptor 4 signaling activities, and stimulated the phagocytosis of E. coli by macrophage. Overall, our results indicated that substantial amounts of recombinant dioscorins can be purified easily from E. coli and that these recombinant dioscorins are appropriate for application in future investigations of the biomedical functions of dioscorins.