Monitoring OH-PCBs in PCB transport worker's urine as a non-invasive exposure assessment tool.

In this study, we analyzed hydroxylated polychlorinated biphenyls (OH-PCBs) in urine of both PCB transport workers and PCB researchers. A method to monitor OH-PCB in urine was developed. Urine was solid-phase extracted with 0.1% ammonia/ methanol (v/v) and glucuronic acid/sulfate conjugates and then decomposed using ß-glucuronidase/arylsulfatase. After alkaline digestion/derivatization, the concentration of OH-PCBs was determined by HRGC/HRMS-SIM. In the first sampling campaign, the worker's OH-PCB levels increased several fold after the PCB waste transportation work, indicating exposure to PCBs. The concentration of OH-PCBs in PCB transport workers' urine (0.55~11 µg/g creatinine (Cre)) was higher than in PCB researchers' urine (< 0.20 µg/g Cre). However, also a slight increase of OH-PCBs was observed in the researchers doing the air sampling at PCB storage area. In the second sampling, after recommended PCB exposure reduction measures had been enacted, the worker's PCB levels did not increase during handling of PCB equipment. This suggests that applied safety measures improved the situation. Hydroxylated trichlorobiphenyls (OH-TrCBs) were identified as a major homolog of OH-PCBs in urine. Also, hydroxylated tetrachlorobiphenyls (OH-TeCBs) to hydroxylated hexachlorobiphenyls (OH-HxCBs) were detected. For the sum of ten selected major indicators, a strong correlation to total OH-PCBs were found and these can possibly be used as non-invasive biomarkers of PCB exposure in workers managing PCB capacitors and transformer oils. We suggest that monitoring of OH-PCBs in PCB management projects could be considered a non-invasive way to detect exposure. It could also be used as a tool to assess and improve PCB management. This is highly relevant considering the fact that in the next 10 years, approx. 14 million tons of PCB waste need to be managed. Also, the selected populations could be screened to assess whether exposure at work, school, or home has taken place.

Discharge of perfluorinated compounds from rivers and their influence on the coastal seas of Hyogo prefecture, Japan.

The aim of this study was to investigate 12 perfluorinated compounds (PFCs) including perfluorinated carboxylates (C4-C12) and perfluorinated alkyl sulfonates (C4, C6, and C8) in river and seawater samples to determine contamination levels in the aquatic environment of Hyogo prefecture, Japan. High levels of perfluorohexanoic acid (PFHxA; 2300-16,000 ng/L) were detected in the Samondogawa River at Tatsumi Bridge downstream of a PFC production facility; this location also had the highest mass flow rate of PFCs (3900-29,000 kg/y). Widespread contamination of coastal waters was confirmed with PFHxA as the dominant compound. Perfluorooctanoic acid was also prevalent in coastal waters. The concentration of PFHxA in coastal seawater and the distance from the mouth of the Samondogawa River were inversely related. This discharge of high concentrations of PFHxA from the Samondogawa River may have affected concentrations of PFCs in Osaka Bay.

Polychlorinated biphenyl (118) activates osteoclasts and induces bone resorption in goldfish.

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.

Bioaccumulation and primary risk assessment of persistent organic pollutants with various bivalves.

Field surveys on persistent organic pollutant (POP) bioaccumulation were conducted with oysters, clams and scallops whose consumption amount accounted for large shares in the total consumption of shellfish in Japan. There was no numerical difference in bioaccumulation characteristics between oysters, clams, scallops, Corbicula and Mytilus galloprovincialis. Therefore, it was clear that the bioaccumulation characteristics in oysters, clams and scallops, which are important for food, could be ascertained by using the monitoring results with Corbicula and M. galloprovincialis which are easily sampled in various water areas in the world. Non-cancer risk (hazard quotient, HQ) and cancer risk (excess cancer risk, ΔR) via shellfish ranged from 10⁻8 to 10⁻4 and from 10⁻¹¹ to 10⁻7, respectively, at sampling points, which showed the risks of POP exposure via shellfish to be low enough. However, concerning the intake of other food, the importance of dieldrin monitoring should be suggested in Japan. Based on these results, the effectiveness of primary risk assessment could be suggested for screening chemicals whose preferential monitoring is needed.

Absolute configuration of atropisomeric polychlorinated biphenyl 183 enantiomerically enriched in human samples.

Polychlorinated biphenyls (PCBs) are still of serious concern as a potential health hazard due to their persistency and bioacumulation. Of 209 possible PCB congeners, with varying number and position of chlorine atom(s), 19 are chiral. These are mostly highly chlorinated and tend to remain longer against the biological decompositions, suffering biological deracemization in the environment. In this work, we have unequivocally determined the absolute configurations of important chiral PCBs 183 and 171, as well as 132, through the combined theoretical and experimental investigations of the chiroptical properties (circular dichroism and optical rotation), which will be valuable in elucidating the mechanism of biological enantiomer enrichment of PCBs in the environment.

Environmental risk assessment and concentration trend of atmospheric volatile organic compounds in Hyogo Prefecture, Japan.

PURPOSE: The purpose of this study was to evaluate the influences of volatile organic compounds (VOCs) emissions on hazardousness and photochemical reactivity and to propose efficient VOCs abatement strategies. METHODS: The atmospheric concentrations of 101 components of VOCs were measured at six sites which comprehend four urban areas, a roadside area, and an industrial area in Hyogo Prefecture. VOCs influence on hazardousness and photochemical reactivity were evaluated using VOCs measured data and the index on the health effect evaluation and ozone formation potential. The substances that require emissions reduction were selected from the evaluation results. The state and characteristics of environmental pollution were considered from the concentration trends of the selected substances. RESULTS: In industrial area, n-hexadecane, styrene, vinyl chloride monomer, and 1,2-dichloroethane showed a high concentration. In roadside area, n-hexane, n-undecane, n-dodecane, tetrachloroethylene, formaldehyde, acetaldehyde, and 1-butanol showed a high concentration. The excess cancer incidences for formaldehyde exceeded 10(-5) of the level of concern for carcinogenic effect at all sites. Toluene had a high percentage of ozone production. The interannual and seasonal trends of toluene concentrations were different at a regional level and the formaldehyde concentrations in summer were significantly higher than those in winter at the urban sites. CONCLUSIONS: The results show the need to prepare the emission reduction plan for the major sources such as vehicle exhaust, solvent use, and industrial processes to diminish the concentration of toluene that contributes significantly to the formation of photochemical oxidant.

Sampling medium side resistance to uptake of semivolatile organic compounds in passive air samplers.

Current theory of the uptake of semivolatile organic compounds in passive air samplers (PAS) assumes uniform chemical distribution and no kinetic resistance within the passive sampling media (PSM) such as polystyrene-divinylbenzene resin (XAD) and polyurethane foam (PUF). However, these assumptions have not been tested experimentally and are challenged by some recently reported observations. To test the assumptions, we performed kinetic uptake experiments indoors using cylindrical PSM that had been concentrically segmented into three layers. Both XAD and PUF were positioned in the same type of sampler housing to eliminate the variation caused by the different housing designs, which enabled us to quantify differences in uptake caused by the properties of the PSM. Duplicated XAD (PUF) samples were retrieved after being deployed for 0, 1 (0.5), 2 (1), 4 (2), 8 (4), 12 (8), and 24 (12) weeks. Upon retrieval, the PSM layers were separated and analyzed individually for PCBs. Passive sampling rates (R) were lower for heavier PCB homologues. Within a homologue group, R for XAD was higher than that for PUF, from which we infer that the design of the "cylindrical can" housing typically used for XAD PAS lowers the R compared to the "double bowl" shelter commonly used for PUF-disk PAS. Outer layers of the PSM sequestered much higher levels of PCBs than inner layers, indicative of a kinetic resistance to chemical transfer within the PSM. The effective diffusivities for chemical transfer within PSM were derived and were found negatively correlated with the partition coefficients between the PSM and air. Based on the results, we conclude that the PSM-side kinetic resistance should be considered when investigating factors influencing R and when deriving R based on the loss of depuration compounds.