Development of 3D ZnO-CNT Support Structures Impregnated with Inorganic Salts.

Carbon-based materials are promising candidates for enhancing thermal properties of phase change materials (PCMs) without lowering its energy storage capacity. Nowadays, researchers are trying to find a proper porous structure as PCMs support for thermal energy storage applications. In this context, the main novelty of this paper consists in using a ZnO-CNT-based nanocomposite powder, prepared by an own hydrothermal method at high pressure, to obtain porous 3D printed support structures with embedding capacity of PCMs. The morphology of 3D structures, before and after impregnation with three PCMs inorganic salts (NaNO3, KNO3 and NaNO3:KNO3 mixture (1:1 vol% saturated solution) was investigated by scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDX). For structure impregnated with nitrates mixture, SEM cross-section morphology suggest that the inorganic salts impregnation started into micropores, continuing with the covering of the 3D structure surface and epitaxial growing of micro/nanostructured crystals, which led to reducing the distance between the structural strands. The variation of melting/crystallization points and associated enthalpies of impregnated PCMs and their stability during five repeated thermal cycles were studied by differential scanning calorimetry (DSC) and simultaneous DSC-thermogravimetry (DSC-TGA). From the second heating-cooling cycle, the 3D structures impregnated with NaNO3 and NaNO3-KNO3 mixture are thermally stable.

Study of ZnO-CNT Nanocomposites in High-Pressure Conditions.

Recently, carbon nanotubes (CNTs) have been used extensively to develop new materials and devices due to their specific morphology and properties. The reinforcement of different metal oxides such as zinc oxide (ZnO) with CNT develops advanced multifunctional materials with improved properties. Our aim is to obtain ZnO-CNT nanocomposites by in situ hydrothermal method in high-pressure conditions. Various compositions were tested. The structure and morphology of ZnO-CNT nanocomposites were analyzed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry-thermogravimetry (DSC-TG), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). These analyses showed the formation of complex ZnO-CNT structures. FT-IR spectra suggest possible interactions between CNT and ZnO. DSC-TG analysis also reveals the formation of some physical bonds between ZnO and CNT, through the appearance of endothermic peaks which could be assigned to the decomposition of functional groups of the CNT chain and breaking of the ZnO-CNT bonds. XRD characterization demonstrated the existence of ZnO nanocrystallites with size around 60 nm. The best ZnO:CNT composition was further selected for preliminary investigations of the potential of these nanocomposite powders to be processed as pastes for extrusion-based 3D printing.

The Influence of Synthesis Parameters on Structural and Magnetic Properties of Iron Oxide Nanomaterials.

Magnetic iron oxides have been used in biomedical applications, such as contrast agents for magnetic resonance imaging, carriers for controlled drug delivery and immunoassays, or magnetic hyperthermia for the past 40 years. Our aim is to investigate the effect of pressure and temperature on the structural, thermal, and magnetic properties of iron oxides prepared by hydrothermal synthesis at temperatures of 100-200 °C and pressures of 20-1000 bar. It has been found that pressure influences the type of iron oxide crystalline phase. Thus, the results obtained by Mössbauer characterization are in excellent agreement with X-ray diffraction and optical microscopy characterization, showing that, for lower pressure values (<100 bar), hematite is formed, while, at pressures >100 bar, the major crystalline phase is goethite. In addition, thermal analysis results are consistent with particle size analysis by X-ray diffraction, confirming the crystallization of the synthesized iron oxides. One order of magnitude higher magnetization has been obtained for sample synthesized at 1000 bar. The same sample provides after annealing treatment, the highest amount of good quality magnetite leading to a magnetization at saturation of 30 emu/g and a coercive field of 1000 Oe at 10 K and 450 Oe at 300 K, convenient for various applications.

Electrochemical sensor based on molecularly imprinted polymer for sensitive triclosan detection in wastewater and mineral water.

Triclosan (TCS) is a topical antiseptic widely used in different cosmetic products. It is also a common additive in many antimicrobial household consumables. Over a certain concentration, it becomes risky for human and environmental health. This work describes the development of an electrochemical sensor based on molecularly imprinted polymer (MIP), assembled on screen-printed gold electrode (Au-SPE), dedicated to the TCS detection in environmental water sources. To achieve this goal, an acrylamide/bisacrylamide solution was polymerized after linking TCS with the carboxylic polyvinyl chloride (PVC-COOH) layer onto the Au-SPE. The sensor device fabrication and its retention capabilities were characterized through cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM) and Fourier transform infrared (FTIR) spectroscopy. As control experiment, negligible responses were obtained during the non-imprinted polymer (NIP) test. The sensor could effectively detect TCS avoiding interferences of structural similar substances like 2,4,6-trichlorophenol and catechol. Under optimal conditions, the sensor responses were found logarithmic in the concentration range from 0.1 to 1000 pg mL-1. Indeed, compared with reported works, this sensor exhibits lower detection limit (LOD) and quantification limit (LOQ) of 0.23 and 0.78 pg mL-1, respectively. The developed sensor was effectively applied to wastewater samples for TCS detection and displayed satisfactory performances. Moreover, the different wastewater samples, regarding their TCS contents, were correctly classified by using principal component analysis (PCA) technique. Correspondingly, this work has demonstrated a cheap, simple and effective sensing platform for TCS detection thus making it a promising tool for future evolution of accurate and reliable environmental analysis.