Upscaled Synthesis Protocol for Phase-Pure, Colloidally Stable MXenes with Long Shelf Lives.

MXenes are electrically conductive 2D transition metal carbides/nitrides obtained by the etching of nanolaminated MAX phase compounds, followed by exfoliation to single- or few-layered nanosheets. The mainstream chemical etching processes have evolved from pure hydrofluoric acid (HF) etching into the innovative "minimally intensive layer delamination" (MILD) route. Despite their current popularity and remarkable application potential, the scalability of MILD-produced MXenes remains unproven, excluding MXenes from industrial applications. This work proposes a "next-generation MILD" (NGMILD) synthesis protocol for phase-pure, colloidally stable MXenes that withstand long periods of dry storage. NGMILD incorporates the synergistic effects of a secondary salt, a richer lithium (Li) environment, and iterative alcohol-based washing to achieve high-purity MXenes, while improving etching efficiency, intercalation, and shelf life. Moreover, NGMILD comprises a sulfuric acid (H2 SO4 ) post-treatment for the selective removal of the Li3 AlF6 impurity that commonly persists in MILD-produced MXenes. This work demonstrates the upscaled NGMILD synthesis of (50 g) phase-pure Ti3 C2 Tz MXene clays with high extraction yields (>22%) of supernatant dispersions. Finally, NGMILD-produced MXene clays dry-stored for six months under ambient conditions experience minimal degradation, while retaining excellent redispersibility. Overall, the NGMILD protocol is a leap forward toward the industrial production of MXenes and their subsequent market deployment.

Colloidal Stability and Aggregation Mechanism in Aqueous Suspensions of TiO2 Nanoparticles Prepared by Sol-Gel Synthesis.

Understanding the colloidal stability and aggregation behavior of TiO2 nanoparticles in aqueous suspension is a prerequisite to tune supracolloidal structure formation. While the aggregation mechanism for dried TiO2 nanopowders is well documented, there is still work to be done to understand TiO2 nanoparticle aggregation in suspension. Therefore, this work focuses on the colloidal stability and aggregation mechanism of TiO2 nanoparticle aqueous suspensions prepared using a straightforward one-step sol-gel-based approach over a concentration range of 0.5-5 wt %. Fully crystalline nanoparticles consisting primarily of anatase were obtained. After assessing the colloidal stability of the as-prepared suspensions, small-angle X-ray scattering coupled with fractal analysis was carried out. This analysis showed, for the first time, how the TiO2 nanoparticle aggregation mechanism─predicted by the diffusion limited cluster-cluster aggregation (DLCA) and diffusion limited particle-cluster aggregation (DLA) theories─depends directly on the starting concentration in the aqueous suspensions. We found that concentrated suspensions favored DLA, while dilute suspensions tend to follow the DLCA mechanism. The effect of the aggregation mechanism on the aggregate shape is also discussed.

Synthesis and Characterization of Double Solid Solution (Zr,Ti)2(Al,Sn)C MAX Phase Ceramics.

Quasi phase-pure (>98 wt %) MAX phase solid solution ceramics with the (Zr,Ti)2(Al0.5,Sn0.5)C stoichiometry and variable Zr/Ti ratios were synthesized by both reactive hot pressing and pressureless sintering of ZrH2, TiH2, Al, Sn, and C powder mixtures. The influence of the different processing parameters, such as applied pressure and sintering atmosphere, on phase purity and microstructure of the produced ceramics was investigated. The addition of Sn to the (Zr,Ti)2AlC system was the key to achieve phase purity. Its effect on the crystal structure of a 211-type MAX phase was assessed by calculating the distortions of the octahedral M6C and trigonal M6A prisms due to steric effects. The M6A prismatic distortion values were found to be smaller in Sn-containing double solid solutions than in the (Zr,Ti)2AlC MAX phases. The coefficients of thermal expansion along the ⟨ a⟩ and ⟨ c⟩ directions were measured by means of Rietveld refinement of high-temperature synchrotron X-ray diffraction data of (Zr1- x,Ti x)2(Al0.5,Sn0.5)C MAX phase solid solutions with x = 0, 0.3, 0.7, and 1. The thermal expansion coefficient data of the Ti2(Al0.5,Sn0.5)C solid solution were compared with those of the Ti2AlC and Ti2SnC ternary compounds. The thermal expansion anisotropy increased in the (Zr,Ti)2(Al0.5,Sn0.5)C double solid solution MAX phases as compared to the Zr2(Al0.5,Sn0.5)C and Ti2(Al0.5,Sn0.5)C end-members.

The double solid solution (Zr, Nb)2(Al, Sn)C MAX phase: a steric stability approach.

The addition of Nb and Sn to Zr2AlC is investigated, targeting the synthesis of a Zr-rich bulk MAX phase free of ZrC. The 211 phase formation in the two quaternary Zr-Nb-Al-C and Zr-Al-Sn-C systems is evaluated. Solubility over the entire compositional range in (Zr, Nb)2AlC and Zr2(Al, Sn)C is observed. In terms of effectiveness, the addition of Sn is preferred over the addition of Nb, as the former is selectively incorporated into the 211 structure. A combinatorial approach results in the formation of phase-pure (Zr0.8, Nb0.2)2(Al0.5, Sn0.5)C. The effect of the added solutes on the microstructure and crystallographic parameters is investigated. The addition of Nb and Sn reduces the distortion parameter of the trigonal prism compared to pure Zr2AlC. Therefore, an attempt is made to establish a more general stability criterion for the M2AC structure based on the steric relationship between the atoms in the M6A trigonal prism. Inspired by the Hume-Rothery rules, it is suggested that comparable atomic radii of the M- and A-atoms provide a good starting point to obtain a stable 211 MAX phase.

Theoretical Prediction and Synthesis of (Cr2/3Zr1/3)2AlC i-MAX Phase.

Guided by predictive theory, a new compound with chemical composition (Cr2/3Zr1/3)2AlC was synthesized by hot pressing of Cr, ZrH2, Al, and C mixtures at 1300 °C. The crystal structure is monoclinic of space group C2/ c and displays in-plane chemical order in the metal layers, a so-called i-MAX phase. Quantitative chemical composition analyses confirmed that the primary phase had a (Cr2/3Zr1/3)2AlC stoichiometry, with secondary Cr2AlC, AlZrC2, and ZrC phases and a small amount of Al-Cr intermetallics. A theoretical evaluation of the (Cr2/3Zr1/3)2AlC magnetic structure was performed, indicating an antiferromagnetic ground state. Also (Cr2/3Hf1/3)2AlC, of the same structure, was predicted to be stable.

Synthesis of MAX Phases in the Zr-Ti-Al-C System.

This study reports on the synthesis and characterization of MAX phases in the (Zr,Ti)n+1AlCn system. The MAX phases were synthesized by reactive hot pressing and pressureless sintering in the 1350-1700 °C temperature range. The produced ceramics contained large fractions of 211 and 312 (n = 1, 2) MAX phases, while strong evidence of a 413 (n = 3) stacking was found. Moreover, (Zr,Ti)C, ZrAl2, ZrAl3, and Zr2Al3 were present as secondary phases. In general, the lattice parameters of the hexagonal 211 and 312 phases followed Vegard's law over the complete Zr-Ti solid solution range, but the 312 phase showed a non-negligible deviation from Vegard's law around the (Zr0.33,Ti0.67)3Al1.2C1.6 stoichiometry. High-resolution scanning transmission electron microscopy combined with X-ray diffraction demonstrated ordering of the Zr and Ti atoms in the 312 phase, whereby Zr atoms occupied preferentially the central position in the close-packed M6X octahedral layers. The same ordering was also observed in 413 stackings present within the 312 phase. The decomposition of the secondary (Zr,Ti)C phase was attributed to the miscibility gap in the ZrC-TiC system.

Synthesis of MAX Phases in the Hf-Al-C System.

For the first time, MAX phases in the Hf-Al-C system were experimentally synthesized using reactive hot pressing. HfC was observed as the main competing phase. The lattice parameters of Hf2AlC and Hf3AlC2 were determined by Rietveld refinement based on the X-ray diffraction data. The atomic stacking sequence was revealed by high-resolution scanning transmission electron microscopy. Mixtures of 211 and 312 stacking were observed within the same grain, including 523 layers. This transition in atomic structure is discussed.