Terbinafine Nanohybrid: Proposing a Hydrogel Carrying Nanoparticles for Topical Release.

A poloxamer 407 (P407)-Casein hydrogel was chosen to carry polycaprolactone nanoparticles carrying terbinafine (PCL-TBH-NP). In this study, terbinafine hydrochloride (TBH) was encapsulated into polycaprolactone (PCL) nanoparticles, which were further incorporated into a poloxamer-casein hydrogel in a different addition order to evaluate the effect of gel formation. Nanoparticles were prepared by the nanoprecipitation technique and characterized by evaluating their physicochemical characteristics and morphology. The nanoparticles had a mean diameter of 196.7 ± 0.7 nm, PDI of 0.07, negative ζ potential (-0.713 mV), high encapsulation efficiency (>98%), and did not show cytotoxic effects in primary human keratinocytes. PCL-NP modulated terbinafine was released in artificial sweat. Rheological properties were analyzed by temperature sweep tests at different addition orders of nanoparticles into hydrogel formation. The rheological behavior of nanohybrid hydrogels showed the influence of TBH-PCL nanoparticles addition in the mechanical properties of the hydrogel and a long-term release of the nanoparticles from it.

Nanotechnology as a tool to overcome macromolecules delivery issues.

Nanocarriers can deliver drugs to specific organs or cells, potentially bridging the gap between a drug's function and its interaction with biological systems such as human physiology. The untapped potential of nanotechnology stems from its ability to manipulate materials, allowing control over physical and chemical properties and overcoming drug-related problems, e.g., poor solubility or poor bioavailability. For example, most protein drugs are administered parenterally, each with challenges and peculiarities. Some problems faced by bioengineered macromolecule drugs leading to poor bioavailability are short biological half-life, large size and high molecular weight, low permeability through biological membranes, and structural instability. Nanotechnology emerges as a promising strategy to overcome these problems. Nevertheless, the delivery system should be carefully chosen considering loading efficiency, physicochemical properties, production conditions, toxicity, and regulations. Moving from the bench to the bedside is still one of the major bottlenecks in nanomedicine, and toxicological issues are the greatest challenges to overcome. This review provides an overview of biotech drug delivery approaches, associated nanotechnology novelty, toxicological issues, and regulations.

Two-Step Purification of L-Asparaginase from Acrylaway® L

Abstract L-Asparaginase (L-ASNase) is a biopharmaceutical used for acute lymphoblastic leukaemia (ALL) treatment, dramatically increasing the patients' chance of cure. However, its production and distribution in developing countries were disrupted because of its low profitability, which caused great concern among patients. This study evaluates the feasibility of combining fractional precipitation and aqueous two-phase systems (ATPS) to purify L-ASNase from a low-grade product, commercially known as Acrylaway® L. The ATPS purification results were not particularly expressive compared to the two-step purification process composed of ethanol precipitation and gel filtration, which was able to recover the target molecule with a purification factor over 5 fold. Thus, we studied a purification process capable of manufacturing pharmaceutical grade L-ASNase from a commercially available low-grade raw material; however, improvements regarding its throughput must be achieved, and high purity is the first step to apply it as a new biopharmaceutical product. The proposed process could pose as a short-time solution to mitigate its shortage while a cost-effective production plant is being developed.

Enhancement of the Mechanical and Drug-Releasing Properties of Poloxamer 407 Hydrogels with Casein.

PURPOSE: Topical therapy of local disease (e.g. skin) is advantageous over oral therapy since there is less systemic drug distribution (so fewer side-effects), no first-pass effect, etc. However, patient compliance with topical therapy can be poor as it may require many applications a day and can last months. Here we propose a topical controlled release formulation with thermoresponsive gelation at body temperature and improved adhesiveness, making it easier to remain in contact with the body. METHODS: The formulation contains two excipients, poloxamer 407 (P407) and casein. Casein can modify the properties of the hydrogel through molecular entanglement. In addition, tissue reaction and drug release profile were evaluated. RESULTS: Changes in casein concentration affected adhesive strength, viscosity, mechanical properties and drug release, presumably by hydrophobic interactions between casein and P407. Two different concentrations of P407 were tested with two different concentrations of casein. Formulations containing 5% and 10% casein released 80% of model drug in 48 h, while formulations without casein released the same fraction in around 24 h hours. Formulations with 10% casein had almost twice the adhesive strength of those without casein. CONCLUSIONS: Addition of casein modified the mechanical properties and drug release rate of the hydrogel. There was no inflammation or injury after brief exposure in vivo.

Brief descriptions of the principles of prominent methods used to study the penetration of materials into human hair and a review of examples of their use.

Consumers are attracted to the latest fashion trends and different looks. This drives the search for novel hair treatments. Some chemicals present in hair treatment products can penetrate the hair shaft. These materials can either nourish or injure the hair cortex. Different techniques have been used to investigate the mechanism of molecule penetration and the conditions under which penetration occurs. This article reviews the techniques applied for this purpose. Various microscopy techniques are used to capture clear and colourful images to determine the diffusion pathways and the exact location of the molecules under study. However, the laborious sample preparation often leads to sample destruction since cross-sectioning is often required. While various other techniques have been successfully used for investigating the penetration methods, most of these require different amounts of work to be put in for sample preparation and instrumentation. Several spectroscopic techniques have been used to study the penetration of the molecules because of the high levels of accuracy and the quick response time of these techniques. Moreover, the samples are not damaged during the investigation.

Les consommateurs sont attirés par les dernières tendances et les différents styles de la mode. Cela stimule la recherche pour de nouveaux traitements capillaires. Certains produits chimiques présents dans les produits de soins capillaires peuvent pénétrer la tige du cheveu. Ils peuvent tantôt nourrir, tantôt endommager le cortex pileux. Différentes techniques ont été utilisées pour étudier le mécanisme de pénétration des molécules et les conditions dans lesquelles cette pénétration a lieu. Cet article examine les techniques appliquées à cette fin. Diverses techniques de microscopie sont mises en œuvre pour capturer des images claires et colorées afin de déterminer les voies de diffusion et la localisation exacte des molécules à l'étude. Cependant, la préparation laborieuse des échantillons conduit fréquemment à la destruction des échantillons, car une coupe transversale est souvent exigée. Si plusieurs autres techniques ont été utilisées avec succès pour étudier les méthodes de pénétration, la plupart d'entre elles nécessitent différents niveaux d'activité à mettre en œuvre pour la préparation des échantillons et l'instrumentation. Plusieurs techniques spectroscopiques ont été utilisées pour étudier la pénétration des molécules en raison de leurs niveaux élevés de précision et de leur délai de réponse rapide. De plus, les échantillons ne sont pas endommagés pendant l'investigation.

Unplanned absorption of sunscreen ingredients: Impact of formulation and evaluation methods.

Permeation of sunscreens agents reduces its effectiveness and safety, leading to systemic circulation and causing unknown adverse effects. In order to maintain the sunscreen efficacy and safety, the filters must stay on the skin surface, with minimum penetration through dermis. Even facing the possibility of filters permeation, the use of sunscreen is important to avoid skin damage as erythema, free-radicals formation, skin ageing and skin cancer, caused by ultraviolet radiation. Aiming potential side effects caused by topical absorption of sunscreens, studies are carried to improve formulation characteristics and stability, reduce skin permeation and evaluate sun protections factor (SPF). Current assays to detect the permeation of sunscreens involve in vivo or in vitro studies, to simulate physiological conditions of use. The aim of this review is to revisit sunscreen skin permeation data over the last decade and the factors that can enhance skin permeation or improve the sunscreen efficacy.

Rosemary (Rosmarinus officinalis L., syn Salvia rosmarinus Spenn.) and Its Topical Applications: A Review.

Topical application is an important administration route for drugs requiring local action on the skin, thereby avoiding their systemic absorption and adverse side effects. Rosmarinus officinalis L. (syn. Salvia rosmarinus Spenn.), popularly known as rosemary, is an aromatic plant with needle-like leaves belonging to the Lamiaceae family. Rosemary has therapeutic properties and has been used in the folk medicine, pharmaceutical, and cosmetics industries, mainly for its antioxidant and anti-inflammatory properties, which are attributed to the presence of carnosol/carnosic and ursolic acids. The therapeutic use of rosemary has been explored for the treatment of inflammatory diseases; however, other uses have been studied, such as wound healing and skin cancer and mycoses treatments, among others. Besides it therapeutic uses, rosemary has potential applications in cosmetic formulations and in the treatment of pathological and non-pathological conditions, such as cellulite, alopecia, ultraviolet damage, and aging. This review aims to critically discuss the topical applications of rosemary found in the literature while also offering relevant information for the development of topical formulations of its bioactive compounds.

Microalgae: Cultivation Aspects and Bioactive Compounds

Abstract Microalgae are aquatic unicellular microorganisms that can be found both in freshwater and marine systems; are capable of photosynthesis; and can grow as individual cells or associated in chains or small colonies. Microalgae cultivation has gained large momentum among researchers in the past decades due to their ability to produce value metabolites, remarkable photosynthetic efficiency, and versatile nature. The wide technological potential, and thus increasing amount of scattered knowledge, may become the very first barrier that a post graduating student, or any non-specialist reader, will face when introduced to the subject. In this review paper, we access the core aspects of microalgae technology, covering their main characteristics, and comprehensively presenting the main features of their various cultivation modes and biological activity from metabolites.

Biopharmaceuticals from microorganisms: from production to purification

ABSTRACT The use of biopharmaceuticals dates from the 19th century and within 5-10 years, up to 50% of all drugs in development will be biopharmaceuticals. In the 1980s, the biopharmaceutical industry experienced a significant growth in the production and approval of recombinant proteins such as interferons (IFN α, β, and γ) and growth hormones. The production of biopharmaceuticals, known as bioprocess, involves a wide range of techniques. In this review, we discuss the technology involved in the bioprocess and describe the available strategies and main advances in microbial fermentation and purification process to obtain biopharmaceuticals.

Biopharmaceuticals from microorganisms: from production to purification.

The use of biopharmaceuticals dates from the 19th century and within 5-10 years, up to 50% of all drugs in development will be biopharmaceuticals. In the 1980s, the biopharmaceutical industry experienced a significant growth in the production and approval of recombinant proteins such as interferons (IFN α, ß, and γ) and growth hormones. The production of biopharmaceuticals, known as bioprocess, involves a wide range of techniques. In this review, we discuss the technology involved in the bioprocess and describe the available strategies and main advances in microbial fermentation and purification process to obtain biopharmaceuticals.

Biopharmaceuticals from microorganisms: from production to purification

ABSTRACT The use of biopharmaceuticals dates from the 19th century and within 5-10 years, up to 50% of all drugs in development will be biopharmaceuticals. In the 1980s, the biopharmaceutical industry experienced a significant growth in the production and approval of recombinant proteins such as interferons (IFN , , and ) and growth hormones. The production of biopharmaceuticals, known as bioprocess, involves a wide range of techniques. In this review, we discuss the technology involved in the bioprocess and describe the available strategies and main advances in microbial fermentation and purification process to obtain biopharmaceuticals.