Single versus double plate fixation of humeral shaft nonunion.

INTRODUCTION: Humeral shaft fractures are common fractures of the diaphysis of the humerus. The aim of this study was to evaluate factors affecting the clinical outcomes of humeral nonunions surgically treated with open reduction and single- versus double-plate fixation with grafting. MATERIALS AND METHODS: A total of 31 patients with nonunion treated with single- or double-plate screw fixation with bone grafting were retrospectively analysed. The patients were divided into two groups according to the treatment method as Group 1 (single-plate, n = 14) and Group 2 (double-plate, n = 17). Data including demographic and clinical characteristics of the patients, initial and final treatment, type of nonunion and localisation, graft use, shortening, follow-up, time to union, Quick Disabilities of the Arm, Shoulder and Hand (Quick-DASH) scores, and patient-reported cosmetic outcomes were recorded. RESULTS: Of the patients, eight were males, and 23 were females, with a mean age of 47.6 ± 15.8 (range, 20-86) years. Initial treatment was conservative treatment (Sarmiento brace) in seven patients, plate fixation in 22 patients, and intramedullary nailing in two patients. The mean follow-up was 31.0 ± 16.9 months in Group 1 and 25.4 ± 15.6 months in Group 2. There was one nonunion in Group 1 and three in Group 2. There were no significant differences in the union rate and time to union (p = 0.378 and p = 0.262, respectively). The mean Quick-DASH scores and cosmetic results were similar between the groups (p = 0.423 and p = 0.165, respectively). Radial nerve palsy developed in three patients in Group 2, and all these patients recovered completely during follow-up. CONCLUSIONS: Although the double-plate fixation technique has similar clinical, radiological, and functional results to single-plate fixation, it is a more invasive and expensive technique with a longer operation time. Therefore, it should not be used as the first-line treatment option for all humeral shaft nonunion. Nevertheless, the double-plate technique may be preferred to achieve in cases requiring high stability, such as hypertrophic nonunion, osteopenia and comminuted fractures.

Extension pin block technique versus extension orthosis for acute bony mallet finger; a retrospective comparison.

PURPOSE: This study aimed to compare the clinical, radiological, aesthetic and economic outcomes of extension pin block technique and extension orthosis in closed mallet fractures with more than 1/3 of articular surface involvement without subluxation (Wehbe and Schneider classification type IB and IC). MATERIALS AND METHODS: Thirty-nine patients (11 women and 28 men; mean age: 40.9±11.5 years) who had mallet fractures were retrospectively reviewed. Twenty-one patients were treated with the extension pin block technique, and the remaining 18 were treated with the extension orthosis. Fracture classification, measurement of articular surface involvement, presence of subluxation, and the fragment displacement were performed according to the Wehbe and Schneider classification. Crawford's criteria, extension lag, distal interphalangeal joint (DIPJ) range of motion, dorsal bump, and visual analog scale were evaluated. Fracture union, articular incongruity, and all other complications were followed and analyzed. The Michigan Hand Questionnaire (MHQ) was used to evaluate the aesthetic perception of the patient's finger. Direct and indirect costs were calculated for each treatment method. RESULTS: At the final follow-up (mean: 18.4±6.2 months), there was no significant difference with respect to clinical outcomes between groups (p=0.335) and pain (p=0.131). Fracture union was achieved in all cases. Both extension lag (p=0.150) and DIPJ flexion (p=0.261) were not different between groups. Dorsal bump was more frequent in the conservative treatment group (p=0.048). Aesthetic scores were similar between groups (p=0.477), but female patients rated significantly lower aesthetic scores than males (p=0.003) regardless of the treatment method. The direct medical (p=0.001), indirect (p=0.009) and cumulative costs (p=0.001) were significantly higher in surgical treatment group. One pin tract infection, one nail dystrophy, and one joint space narrowing were seen in the surgical treatment group versus none in the conservative treatment group (p=0.698). CONCLUSIONS: Conservative treatment does not result in inferior clinical, radiographic and aesthetic outcomes compared to surgical fixation in closed mallet fractures with more than 1/3 of articular surface involvement without subluxation. Extension orthosis which is non-invasive, and cheap, maybe the treatment of choice in closed mallet fractures. LEVEL OF EVIDENCE: IV; Retrospective cohort.

Risk of Injury to the Neurovascular Structures in the Pararectus Approach Used in Acetabular Fractures: A Cadaver Study.

OBJECTIVES: Complex acetabular fractures involving the quadrilateral plate may necessitate infrapectineal buttress plating, which can be performed through the pararectus approach. The aim of this cadaveric study was to identify the anatomical guide points to protect neurovascular structures at the risk of injury during the pararectus approach. METHODS: Six fresh frozen cadavers (12 hemipelves) were dissected in this study. Location of the inferior epigastric artery (IEA), obturator nerve and corona mortis (CM) was measured using common anatomic landmarks, namely, anterior superior iliac spine, symphysis pubis (SP), and sacroiliac (SI) joint. RESULTS: In the superficial dissection of the abdominal wall, the mean distance between the IEA and anterior superior iliac spine was 106.7 ± 5.2 (range, 99.2-116.4) mm, and the mean distance between IEA and SP was 77.9 ± 3.5 (range, 70.6-82.2) mm. In deep dissection, the mean distance between the SI joint and the SP was 133.1 ± 5.7 (range, 126.0-142.0) mm. The mean distance between the SI joint and ON was 37.3 ± 2.8 (range, 31.0-41.0) mm. The CM was unable to be detected in 2 cadavers, 1 on the right and 1 on the left hemipelves. The mean distance between the CM and SP was 47.7 ± 3.9 (range, 43.0-55.0) mm. CONCLUSIONS: A pararectus approach is a useful approach which allows infrapectineal plating in the treatment of complex acetabular fractures; however, the preservation of critical neurovascular structures is essential during dissection. This study is helpful to identify the structures at risk according to commonly used anatomic landmarks. These data might be a necessary guideline for hip and trauma surgeons.

A rare cause of foot pain in an adolescent due to os paracuneiforme: a case report and review of the literature.

Os paracuneiforme is an extremely rare accessory ossicle located at the medial aspect of the medial cuneiform bone. Although foot pain secondary to accessory ossicles is well known, symptomatic os paracuneiforme that requires surgical excision is rarely reported in the current literature. Herein, a 12-year-old boy with symptomatic os paracuneiforme is presented, and its clinical and imaging findings as well as the treatment are discussed.

Magnesium Bioabsorbable Screw Fixation of Radial Styloid Fractures: Case Report.

Background Several types of fixation materials may be used for the radial styloid fractures such as Kirschner wire fixation, screw fixation, volar plate fixation, and fragment-specific radial buttress plate fixation. However, each of these fixation techniques has certain complications usually related to either the surgical dissection or the application of fixation and symptomatic permanent hardware. Implant removal secondary to irritation of prominent screw heads or bulky plates is not uncommon after radial styloid fracture fixation. Case Description Herein, two patients with an isolated radial styloid fracture who were treated with bioabsorbable magnesium (alloy: MgYREZr) screws are presented. In both patients, the fracture union was achieved without any complication and need for implant removal. Literature Review This is the first report on the use of magnesium screws for this indication. Clinical Relevance Magnesium bioabsorbable compression screw fixation may be an alternative solution that eliminates removal operations due to symptomatic hardware in radial styloid fractures.

Single versus double screw fixation for the treatment of scaphoid waist fractures: Finite element analysis and preliminary clinical results in scaphoid nonunion.

OBJECTIVES: This study aims to compare the single versus double screw fixation of scaphoid waist fractures using finite element analysis, and to present the preliminary clinical results of double screw fixation in a consecutive series of patients with scaphoid nonunion. PATIENTS AND METHODS: A transverse scaphoid waist fracture (Herbert type B2) model was fixed with either single or double cannulated compression screws. Displacement and rotation of the fragments were performed using three-dimensional finite element analysis in three different wrist positions. A retrospective review was performed on 13 male patients (mean age 31.6±12.8 years; range, 17 to 64 years) who underwent double screw fixation for an established scaphoid nonunion in our clinic between January 2015 and December 2017. Assessment of union was established with serial plain radiographs in eight patients and with wrist computed tomography in five patients. Clinical evaluation was performed using the Mayo wrist score and visual analog scale (VAS). RESULTS: In all wrist positions, the displacement of the fracture gap in double screw fixation in all planes (x, y, and z) was less than in single screw fixation. Similarly, rotation of the fracture fragments around the longitudinal axis of the scaphoid was lower in double screw fixation. Complete union was obtained in all patients. The mean time to union was 5±0.75 months (range, 4 to 6 months). The mean VAS was 0.8±0.9 (range, 0 to 3). Mayo wrist score was 91±6.9 (range, 80 to 100) at the final follow-up. CONCLUSION: Double-screw fixation technique may be a solution to reduce the rate of scaphoid nonunion in unstable type B2 scaphoid fractures or nonunion.

Comparison of magnesium versus titanium screw fixation for biplane chevron medial malleolar osteotomy in the treatment of osteochondral lesions of the talus.

PURPOSE: This retrospective study aimed to compare the clinical and radiological outcomes of patients who underwent biplane chevron medial malleolar osteotomy (MMO) for osteochondral lesions of the talus (OLT), fixed with either magnesium (Mg) or titanium (Ti) screws. METHODS: A total of 22 patients (12 male and 10 female) with a mean age of 40.6 ± 12.5 years (range 18-56 years) who underwent MMO for OLT treatment were included in this retrospective study. Of the 22 patients, MMO was fixed with bioabsorbable Mg screws (Alloy: MgYREZr) in 11 patients, and in the remaining 11 patients (one bilateral) MMO was fixed with Ti screws. All patients were followed up for at least 1 year with a mean of 20.7 ± 8.9 months (range 12-49 months). The American Orthopedic Foot and Ankle Society (AOFAS) scale and the visual analog scale (VAS) were used to evaluate the clinical results. Union of the osteotomy, postoperative displacement and all other complications were followed and analyzed. RESULTS: An improvement in the AOFAS scale and VAS points were recorded in both groups with no statistically significant difference between the groups (p 0.079 and 0.107, respectively). Complete union of the osteotomy was obtained in all patients. One patient in the Ti group required implant removal due to pain and irritation. There were no other significant complications in either group. CONCLUSIONS: The results of this study showed that bioabsorbable Mg compression screws have similar therapeutic efficacy to Ti screws in respect of functional and radiological outcomes in MMO fixation. Bioabsorbable Mg screw is an alternative fixation material which can be safely used for MMO in ankle surgery. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Scaphotrapeziotrapezoid Arthrodesis Using Limited Wrist Fusion Plates in Kienböck's Disease.

PURPOSE: The purpose of this study was to evaluate the clinical and radiological results of scaphotrapeziotrapezoid (STT) arthrodesis with a limited wrist fusion plate in patients with Stage IIIB Kienböck's disease (KD). MATERIALS AND METHODS: A retrospective review was performed on nine patients with Stage IIIB KD who underwent STT arthrodesis between 2014 and 2017 at our institution. Clinical evaluations of the patients were made using the shortened quick version of the Disabilities of the Arm, Shoulder, and Hand (Q-DASH) Outcome Measure score (Institute for Work and Health, Toronto, ON, Canada) and grip strength measurements before surgery and at the final follow-up examination. All patients underwent computed tomography (CT) scan to confirm the union of the arthrodesis. RESULTS: A complete union was obtained in all patients. The Q-DASH score was changed from 57.8 ± 8.2 points (range: 47.7 - 70.5) to 32.3 ± 17.3 points (range: 13.6 - 54.5) (p = 0.008). Similarly, the grip strength was improved significantly (p = 0.007). CONCLUSIONS: The use of limited wrist fusion plates for STT arthrodesis in KD is a safe and effective treatment method that provides a high rate union and acceptable functional results.

Avulsion fracture of anterior talofibular ligament from talus: A case report.

Anterior talofibular ligament (ATFL) injuries can occur in three different distinct patterns; rupture of the ligament as a pure soft tissue injury, an avulsion fracture at the ATFL's attachment to either the fibula or the talus. Although fibular avulsion fractures are common, avulsion fracture of ATFL from talus is extremely rare with a single previously reported case in the current literature. A 34-year-old female with ATFL talar avulsion fracture associated with medial malleolar fracture was presented to the emergency department. Fixation of the fragment resulted with excellent functional outcome without a residual instability. Besides more common injury patterns such as mid-substance ATFL rupture and ATFL fibular avulsion fracture, talar avulsion fracture pattern should also be kept in mind in a patient presented with lateral ankle sprain. When a fragment is seen on the ankle radiographs at the tip of fibula, previously described special oblique views should be performed to reveal the correct origin of the fragment.

Comparison of Bioabsorbable Magnesium versus Titanium Screw Fixation for Modified Distal Chevron Osteotomy in Hallux Valgus.

OBJECTIVE: The purpose of this retrospective study was to compare the clinical and radiological results of magnesium versus titanium screw fixation for modified distal chevron osteotomy in hallux valgus (HV). MATERIALS AND METHODS: A total of 31 patients who underwent modified distal chevron osteotomy for HV deformity between 2014 and 2017 were reviewed retrospectively. Headless magnesium (Mg) compression screw fixation was applied in 16 patients (17 feet) and headless titanium (Ti) compression screw in 15 patients (17 feet). Patients were followed up for at least 12 months with a mean of 19.0 ± 6.8 months in the Mg screw group and 16.2 ± 6.19 in the Ti screw group, respectively (p: 0.234). Clinical results were evaluated using the American Orthopedic Foot and Ankle Society Hallux metatarsophalangeal-interphalangeal (AOFAS-MTP-IP) scale and a visual analogue scale (VAS). The hallux valgus angle (HVA) and intermetatarsal angle (IMA) were measured before and after surgery. Time to osteotomy union and any complications were recorded and compared between the groups. RESULTS: An improvement in the AOFAS-MTP-IP scale and VAS points were recorded in both groups with no statistically significant difference between the groups (p: 0.764 and 0.535, resp.). At the final follow-up examination, HVA and IMA were similar (p: 0.226 and 0.712, resp.). There was no significant loss of correction between the early and final radiographs in respect of HVA and IMA in both groups (p: 0.321 and p: 0.067). Full union of the osteotomy was obtained in all patients. Prolonged (1.5 months) swelling and mild hyperemia around the surgical incision were observed in 1 patient in the Mg group but there was a good response to physical and medical therapy, and the complaints were completely resolved. There were no other significant complications in either group. CONCLUSION: The results of this study showed that bioabsorbable Mg compression screw fixation has similar therapeutic efficacy to Ti screw fixation in respect of functional and radiological outcomes. Bioabsorbable Mg screw is an alternative fixation material that can be safely used for modified distal chevron osteotomy in HV surgery.

Can we use the contralateral glenoid cavity as a reference for the measurement of glenoid cavity bone loss in anterior shoulder instability?: a comparative analysis of 3D CT measurements in healthy subjects / ¿Podemos utilizar la cavidad glenoidea contralateral como referencia para la medición de la pérdida ósea de la cavidad glenoidea en la inestabilidad del hombro anterior?: un análisis comparativo de mediciones 3D TC en sujetos sanos

The purpose of this study was to compare the glenoid cavity measurements in healthy subjects. 100 adult subjects without shoulder pathology who had pulmonary computed tomography for any reason, were included in the study. Lung CT images were three-dimensionally rendered and glenoid cavity enface images were obtained. On these images, the glenoid cavity superior-inferior long axis and anterior-posterior equator, as well as the equatorial anterior and posterior radii, were measured. Dominant and nondominant glenoid cavity measurements were compared using the t-test in dependent groups. The long axis of the dominant glenoid cavity was 38.15 ± 3.5 mm, whereas it was 37.87 ± 3.3 mm on the non-dominant side (p = 0.068). The mean width of the glenoid cavity was 28.60 ± 3.3 mm in dominant glenoids cavities and 28.00 ± 2.9 mm in the non-dominant side (p = 0.0001). The equatorial anterior and posterior radii were significantly different between the two sides (p = 0.010, p = 0.001, respectively). The ratio of length to equator was different between the two sides (p = 0.012). The difference in equatorial lengths was 0.98 ± 0.8 mm (range, 0-4.2 mm). The mean difference between the long axis of the glenoid cavity was 1.2 ± 0.9 mm (range 0-4.6 mm). The equator on 69 individuals was larger on the dominant side. Glenoid cavity long axis was larger on the dominant side of 61 individuals. Glenoids cavities are not equal and not symmetrical to each other or influenced by hand dominancy. Measurements based on the assumption that both glenoids cavities are equal may be misleading.

El propósito de este estudio fue comparar las mediciones de las cavidades glenoideas en sujetos sanos. Se incluyeron en el estudio 100 sujetos adultos sin patología de hombro que tenían tomografía computarizada pulmonar. Las imágenes de CT de pulmón se representaron tridimensionalmente y se obtuvieron imágenes de la faceta de la cavidad glenoidea. En estas imágenes, se midieron el eje largo glenoideo superior e inferior y el ecuador anteroposterior, así como los radios ecuatoriales anterior y posterior. Las mediciones de las cavidades glenoideas dominantes y no dominantes se compararon usando la prueba t en grupos dependientes. El eje largo de la cavidad glenoidea dominante fue 38,15 ± 3,5 mm, mientras que fue 37,87 ± 3,3 mm en el lado no dominante (p = 0,068). El ancho medio de la cavidad glenoidea fue de 28,60 ± 3,3 mm en las glenoides dominantes y de 28,00 ± 2,9 mm en el lado no dominante (p=0,0001). Los radios ecuatoriales anterior y posterior fueron significativamente diferentes entre los dos lados (p=0,010; p=0,001, respectivamente). La relación de longitud al ecuador fue diferente entre los dos lados (p=0,012). La diferencia en las longitudes ecuatoriales fue de 0,98 ± 0,8 mm (rango, 0-4,2 mm). La diferencia media entre el eje largo de la cavidad glenoidea fue de 1,2 ± 0,9 mm (rango 0-4,6 mm). El ecuador en 69 individuos era más grande en el lado dominante. En 61 individuos el eje largo de cavidad glenoidea fue más grande en el lado dominante. Las cavidad glenoideas no son iguales ni simétricas entre sí ni están influenciadas por la dominancia de la mano. Las mediciones basadas en la suposición de que ambas cavidades glenoideas son iguales pueden ser engañosas.

Comparison of volar versus dorsal screw fixation for scaphoid waist fractures: A finite element analysis.

PURPOSE: Scaphoid waist fractures may be fixed through volar or dorsal screw fixation. However, there is no consensus on which surgical fixation method should be performed. The purpose of this study was to compare volar versus dorsal screw fixation of scaphoid waist fractures under physiological loading conditions utilizing finite element analysis. METHODS: A transverse scaphoid waist fracture (Herbert type B2) model was fixed with a headless cannulated compression screw using either a volar or dorsal approach. Displacement and rotation of the fragments and stress analysis on the scaphoid bone and screw were analyzed in the models using 3-D finite element analysis in three different wrist positions; total extension (TE), neutral (N) and total flexion (TF). RESULTS: Displacement of the fracture gap in volar fixation in all planes (x, y, z) was less than in dorsal fixation in the TF and N positions. Furthermore, rotational stability was stronger in volar fixation in all planes and wrist positions. von Mises stress values were concentrated on the proximal fragment in all wrist positions. CONCLUSIONS: Although both volar and dorsal fixation techniques can be preferred in Herbert type B2 fractures, results of this finite element analysis suggest that centrally placed volar compression screw fixation may be biomechanically advantageous over dorsal screw fixation. LEVEL OF EVIDENCE: I.

Radiographic analysis of anatomic risk factors for scaphoid fractures; A case-control study.

AIM: The purpose of this study was to investigate the role of anatomic variations in distal radius radiographic indices in patients with or without scaphoid fractures. MATERIALS AND METHODS: Radial inclination (RI), volar tilt (VT), radial height (RH) and ulnar variance (UV) were measured on wrist radiographs of 320 patients with (Group I, n = 167) or without (Group II, n = 153) scaphoid fracture, fall on outstretched hand (FOOSH). Receiver operating characteristics (ROC) curve analysis was used to assess the diagnostic performance for each variable. Sensitivity (Sn), specificity (Sp), cutoff value, and area under the ROC curve were analyzed. Odds ratio was calculated for defined cutoff values. RESULTS: The mean age of the groups was similar (29.3 ±â€¯10.2 vs 31.1 ±â€¯9.9 years, p = 0.060). RI (30.0 ±â€¯2.9 vs 26.8 ±â€¯2.3°) VT (11.4 ±â€¯2.4 vs 10.5 ±â€¯2.2°), RH (14.8 ±â€¯2.1 vs 13.2 ±â€¯1.9 mm), UV (-0.46 ±â€¯1.7 vs 0.00 ±â€¯1.5 mm) were higher in scaphoid fracture group (Gr I vs Gr II, p = 0.000, p = 0.000, p = 0.001, p = 0.012 respectively). Ulna minus variant was more prevalent in fracture group (p = 0.001). Optimal cutoff points for RI, VT, RH and UV in differentiating fractured and intact scaphoid were 28.6° (Sn = 81.0%, Sp = 26.3%), 12.2° (Sn = 80.4%, Sp = 67.1%), 14.85 mm (Sn = 80.4%, Sp = 52.1%) and 0 mm (Sn = 88.6%, Sp = 75.8%), respectively. Odds ratios for defined cutoff points for RI, VT, RH and UV were 10.4 (95% CI, 6.2-17.4), 1.8 (95% CI, 1.1-3.0), 3.7 (95% CI, 2.3-6.2) and 2.2 (95% CI, 1.3-3.7) respectively. CONCLUSION: Increased RI, VT, RH and negative UV were found to be predisposing anatomical risk factors for scaphoid fracture when FOOSH.

Isolated Lateral Malleolar Fracture Treated with a Bioabsorbable Magnesium Compression Screw.

Magnesium (Mg) bioabsorbable screws are new biomaterials used in fracture fixation. In the current literature, there is only one case report on the use of magnesium bio-absorbable screws in ankle fractures. Within the present study, a 19-year-old female who sustained an isolated lateral malleolar fracture was treated with open reduction and intramedullary Mg screw fixation and then followed up for two years. Fracture union was achieved without any complication such as failure of fixation, loss of reduction, infection, or any other adverse reaction. Mg bioabsorbable screws are an alternative method of fracture fixation as compared to conventional metallic implants since they eliminate the need for implant removal.

Fixation of medial malleolar fractures with magnesium bioabsorbable headless compression screws: short-term clinical and radiological outcomes in eleven patients.

OBJECTIVE: The purpose of this retrospective study was to evaluate the outcome of medial malleolar fractures treated with magnesium (MgYREZr) bioabsorbable compression screw fixation. MATERIALS AND METHODS: Eleven patients with a medial malleolar fracture (either isolated or accompanied by bimalleolar or trimalleolar ankle fractures) who were treated with magnesium bioabsorbable compression screws between 2015 and 2016 in our hospital were retrospectively evaluated. Patients were monitored with a mean follow-up of 17.3 ± 4.1 months (range 12-24 months). The mechanism of injury was ground level falls in all patients. All fractures were classified as closed fractures. American Orthopedic Foot and Ankle Society's (AOFAS) scale and the visual analog scale (VAS) were used to evaluate the clinical results during the final follow-up. Bone union and a possible loss of reduction were assessed with serial radiographs. Potential complications including revision surgery and infection were recorded and reported. RESULTS: There were 11 patients (4 female, 7 male) with a mean age of 41 ± 21.9 years (range 20-78 years). Six patients had Herscovici type C and five patients had type B fractures. At the final follow-up the mean AOFAS score was 94.9 ± 5.7 points (range 85-100 points) and the mean VAS score was 0.4 ± 1.2 points (range 0-4 points). Radiographic solid union was achieved in all cases. No complications were seen during the follow-up. No patients required implant removal or revision surgery. CONCLUSIONS: This is the first study that investigates the use of bioabsorbable magnesium compression screws in medial malleolar fractures. The results of this study revealed that fixation of medial malleolar fractures with bioabsorbable magnesium compression screws provides adequate fixation with good functional results. LEVEL OF EVIDENCE: Level IV, therapeutic, retrospective case series.

Fixation of Small Osteochondral Fragments in a Comminuted Distal Humerus Fracture with Magnesium Bioabsorbable Screws: A Case Report.

The treatment of comminuted distal humeral fractures with free osteochondral fragments is challenging. Osteochondral fragments should be retained whenever possible and secured with implants buried beneath the articular surface to obtain a uniform articular surface. Headless compression screws and K wires are commonly used for this purpose. However, certain complications have been reported with these fixation implants in case of the non-union and osteolysis of the fragments such as migration and cartilage damage. Fixation of osteochondral fractures in distal humeral fractures using bioabsorbable implants has been rarely reported in the current literature. Herein, a patient who sustained a comminuted distal humeral fracture with multi-fragmentary osteochondral fragments is presented, and treatment with magnesium bioabsorbable compression screws is discussed.

Posterior tibial tendon impingement due to os subtibiale: a case report and up-to-date review.

Os subtibiale is a rare accessory ossicle located at the tip of the medial malleolus. Although this small ossicle usually has no clinical significance, in some cases it may be a source of ankle pain. Symptomatic os subtibiale is an extremely rare diagnosis, and few cases have been reported to date. The case presented is of a 35-year-old female patient with symptomatic os subtibiale, with a discussion of the diagnosis, clinical findings, and treatment options.

Accessory Ossicles of the Foot and Ankle: Disorders and a Review of the Literature.

Accessory ossicles of the foot and ankle are normal variants of bone development that usually remain asymptomatic. However, they may be involved in various disorders and become a source of pain such as in fractures, dislocations, degenerative changes, osteonecrosis, osteoarthritis, osteochondral lesions, avascular necrosis, and irritation or impingement of adjacent soft tissues. Hence, during the assessment of the situations above, knowledge about these little-known ossicles could be very important to reach the correct diagnosis. Recent studies in the literature have mostly focused on the most frequent 9-12 accessory bones. In this review, 24 types of accessory ossicle are described. These ossicles are accessory navicular bone, os peroneum, os trigonum, os intermetatarseum, os vesalianum. os subfibulare, os subtibiale, os calcaneus secundarius, os calcanei accessorium, os supratalare, os sustentaculi, os talotibiale, os tali accessorium, talus secundarius, os subcalcis, os cuboideum secundarium, os supranaviculare, os infranaviculare, os paracuneiforme, os intercuneiforme, os cuneometatarsale I tibiale, os cuneometatarsale plantare, os cuneo-I metatarsale-II dorsale, and os aponeurosis plantaris. The clinical importance of these bones should be known thoroughly to reduce unnecessary orthopedic consultations and misdiagnosis. This article describes the clinical importance of the accessory ossicles and their possible pathological conditions. Understanding the possible disorders of the accessory ossicles of the foot and ankle can provide a more accurate diagnostic process.

Conversion of hip fusion to total hip arthroplasty: clinical, radiological outcomes and complications in 40 hips.

OBJECTIVE: The purpose of this retrospective study is to report the clinical and radiological outcome of total hip arthroplasty in patients with previous hip arthrodesis. PATIENTS AND METHODS: We retrospectively reviewed 28 (40 hips) prospectively followed patients in whom ankylosed hips were converted to total hip arthroplasty (THA) between 2010 and 2014 in our institution. The average age at the time of the conversion operation was 40.8 ± 9.8 years (range 24-62). The ankylosis had lasted 20.4 ± 13.0 years (range 3-56) before conversion surgery. The etiology of the ankylosis was septic arthritis in 10 (25%), post-traumatic hip osteoarthritis in 8 (20%), developmental hip dysplasia in 6 (15%), rheumatoid arthritis in 6 (15%), primary osteoarthritis in 5 (12.5%) and ankylosing spondylitis in 5 (12.5%) hips. The indications for arthroplasty were intractable low back pain in 14 (50%), hip pain in 24 (85.7%), and ipsilateral knee pain in 19 (67.8%) patients. Harris Hip Score (HHS) was used to rate the clinical results before and after the surgery. Radiographic evaluations included component malposition and loosening. All complications during the study period were recorded. RESULTS: The mean follow-up period was 39.9 ± 10.6 months (range 24-60). The mean preoperative HHS was 33.3 ± 8.6 (range 18-50) and the mean HHS at the final follow-up was 74.9 ± 8.6 (range 52-97). There was a statistically significant increase in HHS (p = 0.0001). HHS was excellent in 1, good in 6, fair in 14 and poor in 7 patients. Increase in HHS was lower than 20 points in one patient (18 points), and one patient required two-staged exchange procedure due to deep infection. Thus, according to our success criteria (increase in HHS more than 20 points, radiographically stable implant, and no further surgical reconstruction), 92.8% (26/28) of patients had benefit from the surgery. Trendelenburg sign was positive in 12 hips. There was limb length inequality in 11 patients (mean 0.5 cm, range 1-3 cm). No patients had heterotopic ossification, sciatic nerve palsy or dislocation. There were five intra-operative fractures of the greater trochanter that were treated with cable wiring. One patient had trochanteric avulsion injury and was treated with trochanteric grip and cables. One patient (2.5%) had deep infection one year after the conversion THA and was treated with two-staged exchange procedure. CONCLUSION: Conversion hip arthroplasty is an effective treatment method which provides functional recovery and patient satisfaction. However, a proper surgical technique and planning is necessary to minimize the complications.