RESUMO
Disperse polymethylsiloxane (PMS) alone and in a mixture with highly disperse nanosilica A-300 was studied as a dry powder and a hydrogel located in various dispersion media (air, chloroform alone and with addition of trifluoroacetic acid) using low-temperature 1H NMR spectroscopy, cryoporometry, thermogravimetry, nitrogen adsorption, microscopy, infrared spectroscopy, and quantum chemistry. The powders of dried PMS and PMS/A-300 can be easily rehydrated upon strong stirring with added water. The slurry properties depend on mechanical treatment features due to stronger compaction of the secondary structures with increasing mechanical loading. The organization of bound water (at a constant hydration degree hâ¯=â¯1â¯g/g) depends strongly on the dispersion media (because chloroform can displace water from narrow interparticle voids into broader ones or into pores inaccessible for larger CDCl3 molecules) and mechanical loading reorganizing aggregates of PMS and A-300 nanoparticles (<1⯵m in size) and agglomerates (>1⯵m) of aggregates. The PMS/nanosilica blends could be of interest from a practical point of view due to additional control of the textural and structural characteristics determining efficiency of sorbents with respect to low- and high-molecular weight compounds depending on the dispersion media that is of importance, e.g., for medical applications.
RESUMO
Interaction of doxorubicin hydrochloride (DOX) (anti-cancer drug) with hydro-compacted nanosilica A-300 (cA-300) alone or cA-300/human serum albumin (HSA) at a small content of water (hâ¯=â¯0.4â¯g per gram of dry silica) in different dispersion media (air, chloroform, and chloroform/trifluoroacetic acid) was analyzed using low-temperature 1H NMR spectroscopy, NMR cryoporometry and quantum chemistry to elucidate specific changes in the interfacial layers. Initial (bulk density ρbâ¯≈â¯0.046â¯g/cm3) and hydro-compacted (ρbâ¯≈â¯0.051-0.265â¯g/cm3 as a function of the hydration degree) nanosilicas were analyzed using nitrogen adsorption-desorption, gelatin adsorption, small angle X-ray scattering (SAXS), TEM, and infrared (FTIR) spectroscopy. Equilibrium adsorption of DOX onto cA-300 and cA-300/HSA was analyzed using ultraviolet-visible light spectroscopy. Photon correlation spectroscopy was used to analyze the particle size distribution in aqueous suspensions with various contents of components. DOX more strongly bound to HSA than silica also affects structure of interfacial water layers that depends on dispersion media because chloroform as immiscible with water changes the water organization to enlarge water structures. In aqueous media, DOX alone remains mainly in the form of nano/microparticles (50â¯nm-2⯵m in size). However, with the presence of cA-300, cA-300/HSA, and HSA alone DOX transforms into pure nano-sized structures. These effects are explained by effective bonding of DOX to HSA having good transport properties with respect to drug molecules/ions that exceed similar properties of nanosilica alone, but cA-300/HSA can be a more effective composite as a drug carrier.
Assuntos
Antibióticos Antineoplásicos/metabolismo , Doxorrubicina/metabolismo , Portadores de Fármacos/química , Nanopartículas/química , Albumina Sérica Humana/metabolismo , Dióxido de Silício/metabolismo , Antibióticos Antineoplásicos/química , Doxorrubicina/química , Humanos , Albumina Sérica Humana/química , Dióxido de Silício/química , SuspensõesRESUMO
Investigations of interfacial and temperature behaviors of nonpolar and polar adsorbates interacting with individual and complex fumed metal or metalloid oxides (FMO), initial and subjected to various treatments or chemical functionalization and compared to such porous adsorbents as silica gels, precipitated silica, mesoporous ordered silicas, filled polymeric composites, were analyzed. Complex nanooxides include core-shell nanoparticles, CSNP (50-200nm in size) with titania or alumina cores and silica or alumina shells in contrast to simple and smaller nanoparticles of individual FMO. CSNP could be destroyed under high-pressure cryogelation (HPCG) or mechanochemical activation (MCA). These treatments affect the structure of aggregates of nanoparticles and agglomerates of aggregates, resulting in their becoming more compacted. The analysis shows that complex FMO could be more sensitive to external actions than simple nanooxides such as fumed silica. Any treatment of 'soft' FMO affects the interfacial and temperature behaviors of polar and nonpolar adsorbates. Rearrangement of secondary particles and surface functionalization affects the freezing-melting point depression of adsorbates. For some adsorbates, open hysteresis loops became readily apparent in adsorption-desorption isotherms. Clustering of adsorbates bound in textural pores in aggregates of nanoparticles (i.e., voids between nanoparticles in secondary structures) causes reduced changes in enthalpy during phase transitions (freezing, fusion, evaporation). Freezing point depression and melting point elevation cause significant hysteresis freezing-melting effects for adsorbates bound to FMO in the textural pores. Relaxation phenomena for both low- and high-molecular weight adsorbates or filled polymeric composites are affected by the morphology of primary particles, structural organization of secondary particles of differently treated or functionalized FMO, content of adsorbates, co-adsorption order, and temperature.
RESUMO
Unmodified pyrogenic silica PS300 and partially silylated nanosilica samples at a degree of substitution of surface silanols by trimethylsilyl (TMS) groups Θ(TMS)=27.2% and 37.2% were studied to elucidate features of the interfacial behavior of water adsorbed alone, or co-adsorbed with methane, hydrogen, or trifluoroacetic acid (TFAA). In the aqueous suspension modified PS300 at Θ(TMS)=37.2% forms aggregates of 50-200 nm in size and can bind significant amounts of water (up to â¼5 g/g). Only 0.5 g/g of this water is strongly bound, while the major fraction of water is weakly bound. The presence of surface TMS groups causes the appearance of weakly associated water (WAW) at the interfaces. The adsorption of methane and hydrogen onto TMS-nanosilica with pre-adsorbed water (hydration degree h=0.05 or 0.005 g/g) increases with increasing temperature. In weakly polar CDCl3 medium, interfacial water exists in strongly (SAW, chemical shift δ(H)=4-5 ppm) and weakly (δ(H)=1-2 ppm) associated states, as well as strongly (changes in the Gibbs free energy -ΔG>0.5-0.8 kJ/mol) and weakly (-ΔG<0.5-0.8 kJ/mol) bound states. WAW does not dissolve TFAA but some fraction of SAW bound to TMS-nanosilica surface can dissolve TFAA.
RESUMO
To control the properties of poly(dimethylsiloxane) (PDMS, Oxane 1000) as a bio-inert material, the characteristics of Oxane 1000 were compared for PDMS alone and interacting with silica gel Si-100 and nanosilica PS400. Low-temperature (1)H NMR spectroscopy, applied to static samples at 200-300 K, and differential scanning calorimetry (DSC) at 153-393 K were used to analyze the properties of PDMS and composites. The NMR study shows that liquid and solid-like fractions of PDMS co-exist over a broad temperature range. The cooling-heating cycles give hysteresis loops of intensity of (1)H NMR signals of methyl groups of a liquid fraction of PDMS vs. temperature depending on the silica type. The loop width differs for PDMS alone and bound to silicas, and the samples preheated at 420 K are characterized by much narrower loops. DSC measurements of the samples show a significant difference in the thermograms on the first and second DSC scans that depend on the silica type. For PDMS confined in pores of silica gel, 3D spatial structure of the polymers can be more ordered than that of PDMS located in thin layers at a surface of nanosilica. Therefore, both melting endotherms and crystallization exotherms are observed for PDMS/silica gel. However, for PDMS/nanosilica, both thermal features are much weaker and observed during only the first DSC scan.
Assuntos
Temperatura Baixa , Dimetilpolisiloxanos/química , Temperatura Alta , Nanoestruturas , Dióxido de Silício/química , Varredura Diferencial de CalorimetriaRESUMO
The state of water in partially destroyed dry yeast cells has been studied using low-temperature 1H NMR spectroscopy. It has been shown that the residual water is in the form of clusters of strongly and weakly associated water (SAW and WAW, respectively). Three or more types of SAW different in the chemical shift values have been found. It has been established that the interfacial water poorly dissolves hydrochloric and trifluoroacetic acids as well as DMSO and CD3CN. Hydrochloric acid on a surface of biomaterials can be separated into HCl and water. This process is stabilized by polar co-solvents (DMSO and CD3CN) added to the CDCl3 dispersion medium.
Assuntos
Dimetil Sulfóxido/química , Ácido Clorídrico/química , Saccharomyces cerevisiae/química , Água/química , Espectroscopia de Ressonância Magnética , Saccharomyces cerevisiae/citologiaRESUMO
Detailed analysis of the interfacial behavior of water and weakly polar or nonpolar organics adsorbed alone or co-adsorbed onto activated carbons (AC) at different temperatures is a complex problem important for practical applications of adsorbents. Interaction of water, 1-decanol, and n-decane with AC possessing highly developed porosity (pore volume Vp≈1.4-2.3 cm(3)/g, specific surface area S(BET)≈1500-3500 m(2)/g) was studied over a broad temperature range using differential scanning calorimetry (DSC), thermoporometry, (1)H NMR spectroscopy, cryoporometry, and temperature-programmed desorption with mass-spectrometry control methods. Comparison of the pore size distributions (PSD) calculated using the DSC thermoporometry, NMR cryoporometry, and nitrogen adsorption isotherms allows us to determine localization of adsorbates in different pores, as well as changes in the PSD of AC due to freezing of adsorbates in pores. Theoretical calculations (using ab initio HF/6-31G(d,p), DFT B3LYP/6-31G(d,p), and PM7 methods) explain certain aspects of the interfacial behavior of water, decane, and decanol adsorbed onto AC that appear in the experimental data. Obtained results show strong temperature dependence (above and below the freezing point, Tf, of bulk liquids) of the interfacial behavior of adsorbates on the textural characteristics and hydrophilic/hydrophobic properties of AC and the adsorbate amounts that affect the distributions of adsorbates unfrozen at T
RESUMO
The interfacial behavior of silicone oils Oxane 1000 and Oxane 5700 (polydimethylsiloxanes, PDMS) interacting with dried or hydrated (hydration h=0.005 or 0.1g/g) silica gels Si-60 and Si-100 or nanosilica A-400 was studied using low-temperature (1)H NMR spectroscopy over the 210-310 K range. Broadening of the melting temperature range toward both sides from the freezing point is observed for silicone oils confined in mesopores (2-15 nm in radius) of silica gel particles (0.2-0.5 mm in size) or voids (1-100 nm) between silica nanoparticles (5-10 nm in size) in their aggregates. This effect is a consequence of the phase state heterogeneity, since both liquid and solid-like fractions of adsorbed PDMS are observed over a large temperature range. The adsorbed PDMS heterogeneity depends on the pore size distribution (confined space effect), and it is lower for silica gel Si-100 possessing broader pores than Si-60. An increase in the amounts of adsorbed polymer and water diminishes the effects of confined space on PDMS because a fraction of the polymers is located in broader pores or out of pores (voids). This leads to relative decrease in interactions of PDMS with the silica surface. (1)H NMR spectra of PDMS and n-decane bound to silica gels reveal much stronger heterogenization of adsorbed PDMS (depending on the polymer length) than that of the alkane.
Assuntos
Dimetilpolisiloxanos/química , Sílica Gel/química , Dióxido de Silício/química , Óleos de Silicone/química , Adsorção , Espectroscopia de Ressonância Magnética , Modelos Moleculares , Nanopartículas/química , Porosidade , Propriedades de Superfície , Temperatura de TransiçãoRESUMO
Low-temperature (1)РNMR spectroscopy was used to study states of water bound to phosphoric and phosphonic acids (phosporus oxyacids, POA) alone or adsorbed onto nanosilica OX-50 (specific surface area S(BET)=52 m(2)/g) or A-300 (S(BET)=297 m(2)/g). Concentrated solutions or weakly hydrated solid POA or dried silica/POA powders placed in CCl(4) medium are characterized by different temperature dependences of the chemical shift of the proton resonance (δ(H)) because of partial dissociation of PO-H bonds strongly affected by water amounts and temperature. NMR cryoporometry results show that both small water clusters and nanodomains are present at the interfaces of hydrated solid POA and silica/POA powders. Quantum chemical calculations of the (1)H NMR spectra demonstrate the influence of POA/water cluster structure and dissociation of the PO-H bonds on the δ(H) values.
RESUMO
The effect of the anticancer drug--doxorubicin (Dox) on hydration properties of a nanocomposite material deposited on silica and modified by small amount of DNA (0.6 wt%) was studied by means of (1)H NMR spectroscopy at low temperatures (in the range of 200-280 K). Signals of either weakly (WAW) or strongly (SAW) associated water, as well as water associated with electrondonor groups of the composite surface (ASW), were observed. The findings reveal that, depending on the temperature and the composition of the dispersion medium, fast molecular exchange takes place between different forms of interphase water. The presence of Dox (0.1-0.2 wt%) in the dispersion medium leads to change of the relative concentrations of different forms of water.
Assuntos
Antineoplásicos/farmacologia , DNA/química , Doxorrubicina/farmacologia , Espectroscopia de Ressonância Magnética/métodos , Nanocompostos/química , Dióxido de Silício/química , Adsorção , Clorofórmio/química , Doxorrubicina/química , Elétrons , Microscopia/métodos , Modelos Estatísticos , Nanotecnologia/métodos , Polinucleotídeos/química , Solventes/química , Propriedades de Superfície , Temperatura , Termodinâmica , Água/químicaRESUMO
The structural, textural, and adsorption characteristics of mechanochemically activated (MCA) fumed silica A-300 as dry or water, ethanol, or water/ethanol-wetted powders (0.5 g of a solvent per gram of silica) in a ball mill for 1-6 h were studied in comparison with those of the initial powder. The MCA treatment enhances bulk density (ρ(b)) of the powder (from 0.045 g/cm(3) for the initial silica to 0.4 g/cm(3) for 6 h-MCA-treated water-wetted silica) depending on medium type and MCA time (t(MCA)). Stronger effects are observed for the MCA treatment of water-wetted silica than of dry or ethanol- or water/ethanol-wetted samples. The MCA treatment weakly affects the specific surface area (S(BET)). However, void (pore) size distribution, porosity, particle aggregation and size distribution in aqueous suspension, behavior of interfacial water, properties of poly(vinyl alcohol)/silica composites and adsorption of gelatin depend more strongly on the t(MCA) and ρ(b) values. Some of the observed changes in the characteristics (e.g., gelatin adsorption) depend on the ρ(b) value but are independent of the medium type used on the MCA. Other characteristics are nonlinear functions of both t(MCA) and ρ(b) values.
Assuntos
Gelatina/química , Nanoestruturas/química , Dióxido de Silício/química , Adsorção , Gelatina/metabolismo , Tamanho da Partícula , Porosidade , Dióxido de Silício/metabolismo , Solventes/química , Propriedades de Superfície , Suspensões , Água/química , MolhabilidadeRESUMO
Adsorption of low-molecular adsorbates (nonpolar hexane, nitrogen, weakly polar acetonitrile, and polar diethylamine, triethylamine, and water) onto individual (silica, alumina, titania), binary (silica/alumina (SA), silica/titania (ST)), and ternary (alumina/silica/titania, AST) fumed oxides was studied to analyse the effects of morphology and surface composition of the materials. Certain aspects of the interfacial phenomena dependent on the structural characteristics of oxides were analysed using calorimetry, (1)H NMR, and Raman spectroscopies, XRD, and ab initio quantum-chemical calculations. The specific surface area S(BET,X)-to-S(BET,N(2)) ratio (X is an organic adsorbate) changes from 0.68 for hexane adsorbed onto amorphous SA8 (degassed at 200 degrees C) to 1.85 for acetonitrile adsorbed onto crystalline alumina (degassed at 900 degrees C). These changes are relatively large because of variations in orientation, lateral interactions, and adsorption compressing of molecules adsorbed onto oxide surfaces. Larger S(BET,X)/S(BET,N(2)) values are observed for mixed oxides with higher crystallinity of titania or/and alumina phases in larger primary nanoparticles with greater surface roughness and hydrophilicity. Polar adsorbates can change the structure of aggregates of oxide nanoparticles that can, in turn, affect the results of adsorption measurements.
Assuntos
Óxido de Alumínio/química , Nanopartículas/química , Óxidos/química , Dióxido de Silício/química , Titânio/química , Acetonitrilas/química , Adsorção , Dietilaminas/química , Etilaminas/química , Hexanos/química , Espectroscopia de Ressonância Magnética , Modelos Moleculares , Nitrogênio/química , Propriedades de Superfície , Água/químicaRESUMO
Morphological, structural, adsorption, and catalytic properties of highly disperse titania prepared using sulfate and pyrogenic methods, and fumed titania-containing mixed oxides, were studied using XRD, TG/DTA, nitrogen adsorption, (1)H NMR, FTIR, microcalorimetry on immersion of oxides in water and decane, thermally stimulated depolarization current (TSDC) and catalytic photodecomposition of methylene blue (MB). Phase composition and aggregation characteristics of nanoparticles (pore size distribution) of sulfate and pyrogenically prepared titania are very different; temperature dependent structural properties are thus very different. Catalytic activity for the photodecomposition of MB is greatest (per gram of TiO(2) for the pure oxide materials) for non-treated ultrafine titania PC-500, which has the largest S(BET) value and smallest particle size of the materials studied. However, this activity calculated per m(2) is higher for PC-105, possessing a much smaller S(BET) value than PC-500. The activity per unit surface area of titania is greatest for the fumed silica-titania mixed oxide ST20. Calcination of PC-500 at 650 degrees C leads to enhancement of anatase content and catalytic activity, but heating at 800 and 900 degrees C lowers the anatase content (since rutile appears) and diminishes catalytic activity, as well as the specific surface area because of nanoparticle sintering.
RESUMO
The structural and adsorption characteristics of polymer adsorbent LiChrolut EN and the behavior of adsorbed water and water/organic mixtures were studied using adsorption, microcalorimetry, transmission and scanning electron microscopy, mass spectrometry, infrared spectroscopy, 1H NMR spectroscopy with layer-by-layer freezing-out of liquids (190-273 K), and thermally stimulated depolarization current method (90-265 K). This adsorbent is characterized by large specific surface area (approximately 1500 m2/g) and pore volume (0.83 cm3/g) with a major contribution of narrow pores (R<10 nm) of a complicated shape (long hysteresis loop is in nitrogen adsorption-desorption isotherm). The adsorbent includes aromatic and aliphatic structures and oxygen-containing functionalities and can effectively adsorb organics and water/organic mixtures. On co-adsorption of water and organics (dimethyl sulfoxide, chloroform, methane), there is a weak influence of one on another adsorbate due to their poor mixing in pores. Weakly polar chloroform displaces a fraction of water from narrow pores. These effects can explain high efficiency of the adsorbent in solid-phase extraction of organics from aqueous solutions. The influence of structural features of several carbon and polymer adsorbents on adsorbed nitrogen, water and water/organics is compared on the basis of the adsorption and 1H NMR data.
RESUMO
The influence of sugars (glucose, fructose, and sucrose) on the hydration characteristics of serum albumin was studied using 1H NMR spectroscopy in combination with layer-by-layer freezing-out of bulk and interfacial water. It was found that the presence of sugars in protein solution leads to a considerable decrease in the concentration of bound water at T < 273 K; i. e., sugars cause the dehydration of protein molecules, which may be caused by those alterations in albumin structure that are associated with the formation of more compact globular structures. The most considerable effect was recorded in case of sucrose, which causes a decrease in the dehydration of albumin by at least one order of magnitude. The interfacial energy values for the protein/water system were calculated.
Assuntos
Frutose/química , Glucose/química , Soroalbumina Bovina/química , Sacarose/química , Animais , Bovinos , Temperatura Baixa , Humanos , Ressonância Magnética Nuclear BiomolecularRESUMO
Structural characterization of different silicas (ordered mesoporous silicas MCM-41, MCM-48, and SBA-15, amorphous silica gels Si-40, Si-60, and Si-100, and initial and wetted-dried fumed silica A-300) and bio-objects (fibrinogen solution, yeast cells, wheat seeds, and bone tissues) has been done using two versions of cryoporometry based on integral Gibbs-Thomson (IGT) equation for freezing point depression of pore liquids measured by 1H NMR spectroscopy (180-200 < T < 273 K) and thermally stimulated depolarization current (TSDC) method (90 < T < 273 K). The IGT equation was solved using a self-consisting regularization procedure including the maximum entropy principle applied to the distribution function of pore size (PSD). Comparison of the PSDs calculated by using the cryoporometry and nitrogen adsorption methods for the mentioned silicas demonstrates that IGT equation provides satisfactory fit which is better than that obtained with nonintegral Gibbs-Thomson (GT) equation (based on the GT equation) proposed by Aksnes and Kimtys. The NMR- and TSDC-cryoporometry methods applied to probe biosystems give clear pictures of changes in the structural characteristics caused, e.g., by hydration and swelling of wheat seeds and yeast cells, coagulation and interaction of fibrinogen with solid nanoparticles in the aqueous media, and human bone tissue disease.
Assuntos
Biofísica/métodos , Adsorção , Osso e Ossos/metabolismo , Físico-Química/métodos , Entropia , Fibrinogênio/química , Humanos , Espectroscopia de Ressonância Magnética/métodos , Modelos Químicos , Modelos Estatísticos , Nanopartículas , Nitrogênio/química , Termodinâmica , Triticum/metabolismo , Leveduras/metabolismoRESUMO
Polymethylsiloxane (PMS) hydrogel (C(PMS)=10 wt%, soft paste-like hydrogel), diluted aqueous suspensions, and dried/wetted xerogel (powder) were studied in comparison with suspensions and dry powders of unmodified and silylated nanosilicas and silica gels using (1)H NMR, thermally stimulated depolarization current (TSDC), quasielastic light scattering (QELS), rheometry, and adsorption methods. Nanosized primary PMS particles, which are softer and less dense than silica ones because of the presence of CH(3) groups attached to each Si atom and residual silanols, form soft secondary particles (soft paste-like hydrogel) that can be completely decomposed to nanoparticles with sizes smaller than 10 nm on sonication of the aqueous suspensions. Despite the soft character of the secondary particles, the aqueous suspensions of PMS are characterized by a higher viscosity (at concentration C(PMS)=3-5 wt%) than the suspension of fumed silica at a higher concentration. Three types of structured water are observed in dry PMS xerogel (adsorbed water of 3 wt%). These structures, characterized by the chemical shift of the proton resonance at delta(H) approximately 1.7,3.7, and 5 ppm, correspond to weakly associated but strongly bound water and to strongly associated but weakly or strongly bound waters, respectively. NMR cryoporometry and QELS results suggest that PMS is a mesoporous-macroporous material with the textural porosity caused by voids between primary particles forming aggregates and agglomerates of aggregates. PMS is characterized by a much smaller adsorption capacity with respect to proteins (gelatin, ovalbumin) than unmodified fumed silica A-300.
RESUMO
Applications of thermally stimulated depolarisation current (TSDC) technique to a variety of systems with different dispersion phases such as disperse and porous metal oxides, polymers, liquid crystals, amorphous and crystalline solids, composites, solid solutions, biomacromolecules, cells, tissues, etc. in gaseous or liquid dispersion media are analysed. The effects of dipolar, direct current (dc) and space charge relaxations are linked to the temperature dependent mobility of molecules, their fragments, protons, anions, and electrons and depend on thermal treatment, temperature and field intensity of polarisation, heating rate on depolarisation or cooling rate on polarisation. Features of the relaxation mechanisms are affected not only by the mentioned factors but also by morphological, structural and chemical characteristics of materials. The interfacial phenomena, especially the role of interfacial water, received significant attention on analysis of the TSDC data. Comparison of the data of TSDC and dielectric relaxation spectroscopy (DRS), differential scanning calorimetry (DSC), 1H NMR spectroscopy with layer-by-layer freezing-out of bulk and interfacial water, adsorption/desorption of nitrogen, water and dissolved organics demonstrates high sensitivity and information content of the TSDC technique, allowing a deeper understanding of interfacial phenomena.
RESUMO
A new technique of calculation of a distribution function of activation energy (f(E)) of shear viscosity based on a regularization procedure applied to the Fredholm integral equation of the first kind has been developed using the Baxter-Drayton and Brady model for concentrated and flocculated suspensions. This technique has been applied to the rheological data obtained at different shear rates for aqueous suspensions with fumed silica A-300 and low-molecular (3,4,5-trihydroxybenzoic acid and 1,5-dioxynaphthalene) or high-molecular (poly(vinyl pyrrolidone) of 12.7 kDa and ossein of 20-29 kDa) compounds over a wide concentration range (up to 25 wt% of both components) and at different temperatures. Monomodal f(E) distributions are observed for the suspensions with individual A-300 or A-300 with a low amount of adsorbed organics. In the case of larger amounts of nanosilica and organics the f(E) distributions are multimodal because of stronger structurization and coagulation of the systems that require a high energy to break the coagulation structures resisting to the shear flow.
RESUMO
Water bound in human bone tissues healthy (sample S1) and affected by osteoporosis (sample S2) was investigated by using 1H NMR spectroscopy with layer-by-layer freezing-out of bulk and interfacial waters at T< 273 K. The 1H NMR spectra of the bound water include two signals which can be assigned to strongly associated typical water (chemical shift of the proton resonance at delta(H) approximately 5 ppm) and weakly associated water at delta(H) approximately 1.4 ppm. Approximately, half of the bound water is in the weakly associated state in S1. A fraction of similar water in S2 is smaller because of the structural difference of the studied samples. The pore size distribution of S2 (in aqueous medium) calculated using the cryoporometry method is characterized by much larger intensity of mesopores and macropores in comparison with that of S1. The total porosity and the surface area of the biostructures (accessible for water molecules and estimated on the basis of the cryoporometry data using a model of cylindrical pores) are larger for S2. Weakly polar chloroform-d has a significant influence on the organization of water in a spongy component of bone tissue. This effect depends on the porosity of the bone matrix and the amounts of CDCl3.