Structure Transformation of Methylammonium Polyoxomolybdates via In-Solution Acidification and Solid-State Heating from Methylammonium Monomolybdate and Application as Negative Staining Reagents for Coronavirus Observation.

We prepared polyoxomolybdates with methylammonium countercations from methylammonium monomolybdate, (CH3NH3)2[MoO4], through two dehydrative condensation methods, acidifying in the aqueous solution and solid-state heating. Discrete (CH3NH3)10[Mo36O112(OH)2(H2O)14], polymeric ((CH3NH3)8[Mo36O112(H2O)14])n, and polymeric ((CH3NH3)4[γ-Mo8O26])n were selectively isolated via pH control of the aqueous (CH3NH3)2[MoO4] solution. The H2SO4-acidified solution of pH < 1 produced "sulfonated α-MoO3", polymeric ((CH3NH3)2[(MoO3)3(SO4)])n. The solid-state heating of (CH3NH3)2[MoO4] in air released methylamine and water to produce several methylammonium polyoxomolybdates in the sequence of discrete (CH3NH3)8[Mo7O24-MoO4], discrete (CH3NH3)6[Mo7O24], discrete (CH3NH3)8[Mo10O34], and polymeric ((CH3NH3)4[γ-Mo8O26])n, before their transformation into molybdenum oxides such as hexagonal-MoO3 and α-MoO3. Notably, some of their polyoxomolybdate structures were different from polyoxomolybdates produced from ammonium molybdates, such as (NH4)2[MoO4] or (NH4)6[Mo7O24], indicating that countercation affected the polyoxomolybdate structure. Moreover, among the tested polyoxomolybdates, (CH3NH3)6[Mo7O24] was the best negative staining reagent for the observation of the SARS-CoV-2 virus using transmission electron microscopy.

Mechanochemical Synthesis of Perovskite Oxyhydrides: Insights from Shear Modulus.

Perovskite oxyhydrides have attracted recent attention due to their intriguing properties such as ionic conductivity and catalysis, but their repertoire is still restricted compared to perovskite oxynitrides and oxyfluorides. Historically, perovskite oxyhydrides have been prepared mostly by topochemical reactions and high-pressure (HP) reactions, while in this study, we employed a mechanochemical (MC) approach, which enables the synthesis of a series of ABO2H-type oxyhydrides, including those with the tolerance factor (t) much smaller than 1 (e.g., SrScO2H with t = 0.936) which cannot be obtained by HP synthesis. The octahedral tilting, often present in perovskite oxides, does not occur, suggesting that the lack of π-symmetry of the H 1s orbital and the large polarization destabilize tilted low-symmetry structures. Interestingly, SrCrO2H (t = 0.997), previously reported with the HP method, was not achieved with the MC method. A comparative analysis revealed a correlation between the feasibility of MC reactions and the (calculated) shear modulus of the starting reagents (binary oxides and hydrides). Notably, this indicator is not exclusive to oxyhydride perovskites but extends to oxide perovskites (SrMO3). This study demonstrates that MC synthesis offers unique opportunities not only to expand the compositional space in oxyhydrides in various structural types but also to provide a guide for the choice of starting materials for the synthesis of other compounds.

Anionic Sublattices in Halide Solid Electrolytes: A Case Study with the High-Pressure Phase of Li3ScCl6.

The Li3MX6 compounds (M=Sc, Y, In; X=Cl, Br) are known as promising ionic conductors due to their compatibility with typical metal oxide cathode materials. In this study, we have successfully synthesized γ-Li3ScCl6 using high pressure for the first time in this family. Structural analysis revealed that the high-pressure polymorph crystallizes in the polar and chiral space group P63mc with hexagonal close-packing (hcp) of anions, unlike the ambient-pressure α-Li3ScCl6 and its spinel analog with cubic closed packing (ccp) of anions. Investigation of the known Li3MX6 family further revealed that the cation/anion radius ratio, rM/rX, is the factor that determines which anion sublattice is formed and that in γ-Li3ScCl6, the difference in compressibility between Sc and Cl exceeds the ccp rM/rX threshold under pressure, enabling the ccp-to-hcp conversion. Electrochemical tests of γ-Li3ScCl6 demonstrate improved electrochemical reduction stability. These findings open up new avenues and design principles for lithium solid electrolytes, enabling routes for materials exploration and tuning electrochemical stability without compositional changes or the use of coatings.

Large Perpendicular Magnetic Anisotropy Induced by an Intersite Charge Transfer in Strained EuVO2H Films.

Perovskite oxides ABO3 continue to be a major focus in materials science. Of particular interest is the interplay between A and B cations as exemplified by intersite charge transfer (ICT), which causes novel phenomena including negative thermal expansion and metal-insulator transition. However, the ICT properties were achieved and optimized by cationic substitution or ordering. Here we demonstrate an anionic approach to induce ICT using an oxyhydride perovskite, EuVO2H, which has alternating layers of EuH and VO2. A bulk EuVO2H behaves as a ferromagnetic insulator with a relatively high transition temperature (TC) of 10 K. However, the application of external pressure to the EuIIVIIIO2H bulk or compressive strain from the substrate in the thin films induces ICT from the EuIIH layer to the VIIIO2 layer due to the extended empty V dxy orbital. The ICT phenomenon causes the VO2 layer to become conductive, leading to an increase in TC that is dependent on the number of carriers in the dxy orbitals (up to a factor of 4 for 10 nm thin films). In addition, a large perpendicular magnetic anisotropy appears with the ICT for the films of <100 nm, which is unprecedented in materials with orbital-free Eu2+, opening new perspectives for applications. The present results provide opportunities for the acquisition of novel functions by alternating transition metal/rare earth layers with heteroanions.

Potassium-rich antiperovskites K3HTe and K3FTe and their structural relation to lithium and sodium counterparts.

Unlike perovskite oxides, antiperovskites M3HCh and M3FCh (M = Li, Na; Ch = S, Se, Te) mostly retain their ideal cubic structure over a wide range of compositions owing to anionic size flexibility and low-energy phonon modes that promote their ionic conductivity. In this study, we show the synthesis of potassium-based antiperovskites K3HTe and K3FTe and discuss the structural features in comparison with lithium and sodium analogues. It is shown experimentally and theoretically that both compounds maintain a cubic symmetry and can be prepared at ambient pressure, in contrast to most of the reported M3HCh and M3FCh which require high pressure synthesis. A systematic comparison of a series of cubic M3HTe and M3FTe (M = Li, Na, K) revealed that telluride anions contract in the order of K, Na, Li, with a pronounced contraction in the Li system. This result can be understood in terms of the difference in charge density of alkali metal ions as well as the size flexibility of Ch anions, contributing to the stability of the cubic symmetry.

Pressure-Induced Anion Order-Disorder Transition in Layered Perovskite Sr2LiHOCl2.

While cation order-disorder transitions have been extensively investigated because of their decisive impact on chemical and physical properties, only few anion order-disorder transitions are known. Here, we show that Sr2CuO2Cl2-type layered perovskite Sr2LiHOCl2 exhibits a pressure-induced H-/O2- order-disorder transition. When synthesized at ambient and low pressures (≤2 GPa), Sr2LiHOCl2 is isostructural to orthorhombic Eu2LiHOCl2 (Cmcm) with a H-/O2- order at the equatorial sites. However, applying a higher pressure (5 GPa) during synthesis causes the equatorial anions to be disordered, leading to a tetragonal symmetry (I4/mmm) with a loss of the superstructure. The structural analysis revealed that, in the ambient pressure phase, HLi2Sr4 and OLi2Sr4 octahedra have distinct sizes to stabilize otherwise underbonded oxide ions, which is less important at the higher pressure. Anion-disordered Sr2LiHOBr2 and Ba2LiHOCl2 were also obtained at 5 GPa. Given the abundant layer-type anion order in perovskite-based oxyhydrides (e.g., La2LiHO3), the inclusion of additional anions (e.g., chloride) expands the frontiers of anion ordering patterns and their distribution control with the benefit of improving ionic conduction in solids.

Structural Transformation in LnHS (Ln = La, Nd, Gd, and Er) with Coordination Change between an S-Centered Octahedron and a Trigonal Prism.

Lanthanide hydride chalcogenides LnHSe and LnHTe (Ln = lanthanides) crystallize in two polymorphs, 2H and 1H structures (ZrBeSi-type and filled-WC-type structures, respectively), but the chemical origin of the structural selection is unknown. Here, we have expanded the LnHCh (Ch = O, Se, and Te) family to include LnHS (Ln = La, Nd, Gd, and Er) using high-pressure synthesis. LnHS adopts the 2H structure for large Ln (La, Nd, and Gd) and the 1H structure for small Er. We compared the two polymorphs using anion-centered polyhedra and found that in the compounds with large ionicity, the 2H structure with ChLn6 octahedra is stabilized over the 1H structure with ChLn6 trigonal prisms due to relatively small electrostatic repulsion, supported by analysis of Madelung energy, crystal orbital Hamilton population (COHP), and density of energy (DOE).

Evolutionary Algorithm Directed Synthesis of Mixed Anion Compounds LaF2 X (X=Br, I) and LaFI2.

Mixed-anion compounds have attracted growing attentions, but their synthesis is challenging, making a rational search desirable. Here, we explored LaF3 -LaX3 (X=Cl, Br, I) system using ab initio structure searches based on evolutionary algorithms, and predicted LaF2 X and LaFX2 (X=Br, I), which are respectively isostructural with LaHBr2 and YH2 I, consisting of layered La-F blocks with single and double ordered honeycomb lattices, separated by van der Waals gaps. We successfully synthesized these compounds: LaF2 Br and LaFI2 crystallize in the predicted structure, while LaF2 I is similar to the predicted one but with different layer stacking. LaF2 I exhibits fluoride ion conductivity comparable to that of non-doped LaF3 , and has the potential to show better ionic conductivity upon appropriate doping, given the theoretically lower diffusion energy barrier and the presence of soft iodine anions. This study shows the structure prediction using evolutionary algorithms will accelerate the discovery of mixed-anion compounds in future, in particular those with an ordered anion arrangement.

Honeycomb-Layered Oxides With Silver Atom Bilayers and Emergence of Non-Abelian SU(2) Interactions.

Honeycomb-layered oxides with monovalent or divalent, monolayered cationic lattices generally exhibit myriad crystalline features encompassing rich electrochemistry, geometries, and disorders, which particularly places them as attractive material candidates for next-generation energy storage applications. Herein, global honeycomb-layered oxide compositions, Ag2 M2 TeO6 ( M = Ni , Mg , etc $M = \rm Ni, Mg, etc$ .) exhibiting Ag $\rm Ag$ atom bilayers with sub-valent states within Ag-rich crystalline domains of Ag6 M2 TeO6 and Ag $\rm Ag$ -deficient domains of Ag 2 - x Ni 2 TeO 6 ${\rm Ag}_{2 - x}\rm Ni_2TeO_6$ ( 0 < x < 2 $0 < x < 2$ ). The Ag $\rm Ag$ -rich material characterized by aberration-corrected transmission electron microscopy reveals local atomic structural disorders characterized by aperiodic stacking and incoherency in the bilayer arrangement of Ag $\rm Ag$ atoms. Meanwhile, the global material not only displays high ionic conductivity but also manifests oxygen-hole electrochemistry during silver-ion extraction. Within the Ag $\rm Ag$ -rich domains, the bilayered structure, argentophilic interactions therein and the expected Ag $\rm Ag$ sub-valent states ( 1 / 2 + , 2 / 3 + $1/2+, 2/3+$ , etc.) are theoretically understood via spontaneous symmetry breaking of SU(2)× U(1) gauge symmetry interactions amongst 3 degenerate mass-less chiral fermion states, justified by electron occupancy of silver 4 d z 2 $4d_{z^2}$ and 5s orbitals on a bifurcated honeycomb lattice. This implies that bilayered frameworks have research applications that go beyond the confines of energy storage.

Highly Electron-Doped TaON Single-Crystal Growth by a High-Pressure Flux Method.

Transition-metal oxynitrides have a variety of functions such as visible light-responsive catalysts and dielectric materials, but acquiring single crystals necessary to understand inherent properties is difficult and is limited to relatively small sizes (<10 µm) because they easily decompose at high temperatures. Here, we have succeeded in growing platelet single crystals of TaON with a typical size of 50 × 100 × 10 µm3 under a high pressure and high temperature (6 GPa and 1400 °C) using a LiCl flux. Such a harsh condition, in contrast to powder samples synthesized under mild conditions, resulted in the introduction of a large amount of oxygen vacancies (x = 0.06 in TaO1-xN) into the crystal, providing a metallic behavior with a large anisotropy of ρc/ρab ∼ 103. Low-temperature oxygen annealing allows for a single-crystal-to-single-crystal transformation to obtain fully oxidized TaON (yellow) crystals. Needle-like crystals can be obtained when NH4Cl is used as a flux. Furthermore, black Hf2ON2 single crystals are also grown, suggesting that the high-pressure flux method is widely applicable to other transition-metal oxynitrides, with extensive carrier control.

Mixed alkali-ion transport and storage in atomic-disordered honeycomb layered NaKNi2TeO6.

Honeycomb layered oxides constitute an emerging class of materials that show interesting physicochemical and electrochemical properties. However, the development of these materials is still limited. Here, we report the combined use of alkali atoms (Na and K) to produce a mixed-alkali honeycomb layered oxide material, namely, NaKNi2TeO6. Via transmission electron microscopy measurements, we reveal the local atomic structural disorders characterised by aperiodic stacking and incoherency in the alternating arrangement of Na and K atoms. We also investigate the possibility of mixed electrochemical transport and storage of Na+ and K+ ions in NaKNi2TeO6. In particular, we report an average discharge cell voltage of about 4 V and a specific capacity of around 80 mAh g-1 at low specific currents (i.e., < 10 mA g-1) when a NaKNi2TeO6-based positive electrode is combined with a room-temperature NaK liquid alloy negative electrode using an ionic liquid-based electrolyte solution. These results represent a step towards the use of tailored cathode active materials for "dendrite-free" electrochemical energy storage systems exploiting room-temperature liquid alkali metal alloy materials.

Anion ordering enables fast H- conduction at low temperatures.

The introduction of chemical disorder by substitutional chemistry into ionic conductors is the most commonly used strategy to stabilize high-symmetric phases while maintaining ionic conductivity at lower temperatures. In recent years, hydride materials have received much attention owing to their potential for new energy applications, but there remains room for development in ionic conductivity below 300°C. Here, we show that layered anion-ordered Ba2-δH3-2δ X (X = Cl, Br, and I) exhibit a remarkable conductivity, reaching 1 mS cm-1 at 200°C, with low activation barriers allowing H- conduction even at room temperature. In contrast to structurally related BaH2 (i.e., Ba2H4), the layered anion order in Ba2-δH3-2δ X, along with Schottky defects, likely suppresses a structural transition, rather than the traditional chemical disorder, while retaining a highly symmetric hexagonal lattice. This discovery could open a new direction in electrochemical use of hydrogen in synthetic processes and energy devices.

Formation of PbCl2-type AHF (A = Ca, Sr, Ba) with partial anion order at high pressure.

The high-pressure structures of alkaline earth metal hydride-fluorides (AHFs) (A = Ca, Sr, Ba) were investigated up to 8 GPa. While AHF adopts the fluorite-type structure (Fm3[combining macron]m) at ambient pressure without anion ordering, the PbCl2-type (cotunnite-type) structure (Pnma) is formed by pressurization, with a declining trend of critical pressure as the ionic radius of the A2+ cation increases. In contrast to PbCl2-type LaHO and LaOF whose anions are fully ordered, the H-/F- anions in the high-pressure polymorph of SrHF and BaHF are partially ordered, with a preferential occupation of H- at the square-pyramidal site (vs. tetrahedral site). First-principles calculations partially support the preferential anion occupation and suggest occupation switching at higher pressure. These results provide a strategy for controlling the anion ordering and local structure in mixed-anion compounds.

Hydride-based antiperovskites with soft anionic sublattices as fast alkali ionic conductors.

Most solid-state materials are composed of p-block anions, only in recent years the introduction of hydride anions (1s2) in oxides (e.g., SrVO2H, BaTi(O,H)3) has allowed the discovery of various interesting properties. Here we exploit the large polarizability of hydride anions (H-) together with chalcogenide (Ch2-) anions to construct a family of antiperovskites with soft anionic sublattices. The M3HCh antiperovskites (M = Li, Na) adopt the ideal cubic structure except orthorhombic Na3HS, despite the large variation in sizes of M and Ch. This unconventional robustness of cubic phase mainly originates from the large size-flexibility of the H- anion. Theoretical and experimental studies reveal low migration barriers for Li+/Na+ transport and high ionic conductivity, possibly promoted by a soft phonon mode associated with the rotational motion of HM6 octahedra in their cubic forms. Aliovalent substitution to create vacancies has further enhanced ionic conductivities of this series of antiperovskites, resulting in Na2.9H(Se0.9I0.1) achieving a high conductivity of ~1 × 10-4 S/cm (100 °C).

High-Pressure Polymorphs of LaHO with Anion Coordination Reversal.

Two novel high-pressure polymorphs of lanthanum oxyhydride have been successfully predicted and stabilized under pressure. When reacted at 3 GPa, the fluorite structure of LaHO with anion-centered tetrahedral (HLa4/OLa4) geometry is transformed to the PbCl2-type structure involving coordination number increase of H- to five (HLa5 square pyramids). Upon further application of pressure to 5 GPa, LaHO changed into the anti Fe2P-type structure. Interestingly, the 5 GPa phase contains tetrahedral HLa4 and square-pyramidal OLa5 geometry, meaning coordination switching, as confirmed by ab initio calculations. The structural analysis shows that this unprecedented phenomenon is enabled by higher compressibility of hydride anion and emphasizes its potential in the search for new high-pressure forms of hydride-based mixed anion materials.

Chemical Pressure-Induced Anion Order-Disorder Transition in LnHO Enabled by Hydride Size Flexibility.

While cation order-disorder transitions have been achieved in a wide range of materials and provide crucial effects in various physical and chemical properties, anion analogues are scarce. Here we have expanded the number of known lanthanide oxyhydrides, LnHO (Ln = La, Ce, Pr, Nd), to include Ln = Sm, Gd, Tb, Dy, Ho, and Er, which has allowed the observation of an anion order-disorder transition from the anion-ordered fluorite structure ( P4/ nmm) for larger Ln3+ ions (La-Nd) to a disordered arrangement ( Fm3̅ m) for smaller Ln3+ (Sm-Er). Structural analysis reveals that with the increase of Ln3+ radius (application of negative chemical pressure), the oxide anion in the disordered phase becomes too under-bonded, which drives a change to an anion-ordered structure, with smaller OLn4 and larger HLn4 tetrahedra, demonstrating that the size flexibility of hydride anions drives this transition. Such anion ordering control is crucial regarding applications that involve hydride diffusion such as catalysis and electrochemical solid devices.