Enterobacteria in anaerobic digestion of dairy cattle wastewater: Assessing virulence and resistance for one health security.

Samples from a dairy cattle waste-fed anaerobic digester were collected across seasons to assess sanitary safety for biofertilizer use. Isolated enterobacteria (suggestive of Escherichia coli) were tested for susceptibility to biocides, antimicrobials, and biofilm-forming capability. Results revealed a decrease in total bacteria, coliforms, and enterobacteria in biofertilizer compared to the effluent. Among 488 isolates, 98.12 % exhibited high biofilm formation. Biofertilizer isolates exhibited a similar biofilm formation capability as effluent isolates in summer, but greater propensity in winter. Resistance to biocides and antimicrobials varied, with tetracycline resistance reaching 19 %. Of the isolates, 25 were multidrug-resistant (MDR), with 64 % resistant to three drugs. Positive correlations were observed between MDR and increased biofilm formation capacity in both samples, while there was negative correlation between MDR and increased biocide resistance. A higher number of MDR bacteria were found in biofertilizer compared to the effluent, revealing the persistence of E. coli resistance, posing challenges to food safety and public health.

Photoluminous Response of Biocomposites Produced with Charcoal.

Due to the possible effects of global warming, new materials that do not have a negative impact on the environment are being studied. To serve a variety of industries and outdoor applications, it is necessary to consider the impact of photoluminosity on the performance of biocomposites in order to accurately assess their durability characteristics and prevent substantial damage. Exposure to photoluminosity can result in adverse effects such as discoloration, uneven surface, loss of mass, and manipulation of the intrinsic mechanical properties of biocomposites. This study aims to evaluate general charcoal from three pyrolysis temperatures to understand which charcoal is most suitable for photoluminosity and whether higher pyrolysis temperatures have any significant effect on photoluminosity. Porosity, morphology, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy of charcoal were analyzed. Charcoal obtained at a temperature of 800 °C demonstrates remarkable potential as a bioreinforcement in polymeric matrices, attributable to its significantly higher porosity (81.08%) and hydrophobic properties. The biocomposites were characterized for flexural strength, tensile strength, scanning electron microscopy (SEM), FTIR, and x-ray diffraction (XRD). The results showed an improvement in tensile strength after exposure to photoluminosity, with an increase of 69.24%, 68.98%, and 54.38% at temperatures of 400, 600, and 800 °C, respectively, in relation to the treatment control. It is notorious that the tensile strength and modulus of elasticity after photoluminosity initially had a negative impact on mechanical strength, the incorporation of charcoal from higher pyrolysis temperatures showed a substantial increase in mechanical strength after exposure to photoluminosity, especially at 800 °C with breaking strength of 53.40 MPa, and modulus of elasticity of 4364.30 MPA. Scanning electron microscopy revealed an improvement in morphology, with a decrease in roughness at 800 °C, which led to greater adhesion to the polyester matrix. These findings indicate promising prospects for a new type of biocomposite, particularly in comparison with other polymeric compounds, especially in engineering applications that are subject to direct interactions with the weather.

Clues about wood density and trace-element variability of Schizolobium parahyba var. amazonicum (Huber ex Ducke) Barneby for bioenergy use.

The interest of biofuel producers in Neotropical species that have high growth rates, slight wood density variability, and elemental composition that does not compromise the environment has increased in recent decades. We investigated the density and chemical characteristics of wood of Schizolobium parahyba var. amazonicum (Huber × Ducke) Barneby as a source for the generation of bioenergy. Apparent radial wood density profiles (X-ray densitometry (XRD)) and the elemental distribution (X-ray fluorescence (XRF)) of Cl, S, K, and Ca in the wood of nine S. parahyba var. amazonicum trees, divided into three diameter classes (I = 15.5, II = 19.5, and III = 23.5 cm) were analyzed. The high heating value (HHV) of the wood samples was determined, and the energy density was estimated by the product of the HHV and the apparent density. Trees that grew better (classes II and III) produced wood with higher density. These trees showed higher concentrations of K and S, and lower concentrations of Ca and Cl. The highest Cl concentrations were observed in classes with smaller diameters. The chlorine levels met the standards for use of this wood as fuel, but the sulfur levels were higher than the threshold recommended by the ISO 17225-3:2021 guidelines, which can limit the use of the species for certain energy uses. The wood of S. parahyba var. amazonicum had interesting characteristics for the production of bioenergy due to its low density, so it can be used in the production of solid biofuels such as pellets and briquettes. Monitoring chlorine and sulfur is important, since during the combustion of biomass they are released into the atmosphere and can negatively contribute to the effects of climate change.