Monomolecular covalent honeycomb nanosheets produced by surface-mediated polycondensation between 1,3,5-triamino benzene and benzene-1,3,5-tricarbox aldehyde on Au(111).

Fabrication of a two-dimensional covalent network of honeycomb nanosheets comprising small 1,3,5-triamino benzene and benzene-1,3,5-tricarboxaldehyde aromatic building blocks was conducted on Au(111) in a pH-controlled aqueous solution. In situ scanning tunneling microscopy revealed a large defect-free and homogeneous honeycomb π-conjugated nanosheet at the Au(111)/liquid interface. An electrochemical potential dependence indicated that the nanosheets were the result of thermodynamic self-assembly based not only on the reaction equilibrium but also on the adsorption (partition) equilibrium, which was controlled by the building block surface coverage as a function of electrode potential.

Ferroelectric mesocrystalline BaTiO3/BaBi4Ti4O15 nanocomposite: formation mechanism, nanostructure, and anomalous ferroelectric response.

Ferroelectric mesocrystalline nanocomposites are promising materials for the enhancement of ferroelectricity via lattice strain engineering due to their high density of heteroepitaxial interfaces. In the present study, a ferroelectric mesocrystalline BaTiO3/BaBi4Ti4O15 (BT/BBT) nanocomposite was synthesized using the layered titanate H1.07Ti1.73O4via a facile two-step topochemical process. The BT/BBT nanocomposite is constructed from well-aligned BT and BBT nanocrystals oriented along the [110] and [11-1] crystal-axis directions, respectively. Lattice strain is introduced into the nanocomposite through the formation of a BT/BBT heteroepitaxial interface, which results in a greatly elevated Curie temperature for BBT in the range of 400 °C to 700 °C and an improved piezoelectric response with . In addition, the BT/BBT nanocomposite is stable up to a high temperature of 1100 °C; therefore, mesocrystalline ceramics can be fabricated as high-performance ferroelectric materials.

Anomalous piezoelectric response of ferroelectric mesocrystalline BaTiO3/Bi0.5Na0.5TiO3 nanocomposites designed by strain engineering.

Mesocrystals, a new class of unique materials, not only have potential properties based on the individual nanocrystals but also have a single-crystal-like function. Here, we report a ferroelectric mesocrystalline BaTiO3/Bi0.5Na0.5TiO3 (BT/BNT) nanocomposite synthesized from a layered titanate H1.07Ti1.73O4 (HTO) by an ingenious two-step topochemical process for the first time. The BT/BNT nanocomposite is constructed from well-aligned BT and BNT nanocrystals with the same crystal-axis orientation. The BT/BNT heteroepitaxial interface in the nanocomposite is promising for an enhanced piezoelectric performance by using lattice strain engineering, which gives a giant piezoelectric response with a value of 408 pm V-1. The introduced lattice strain at the BT/BNT heteroepitaxial interface causes transitions of pseudo-paraelectric BT and BNT nanocrystals to ferroelectric nanocrystals in the mesocrystalline nanocomposite, which enlarges ferroelectric, piezoelectric and dielectric responses. The lattice strain also results in the elevated Curie temperatures (Tc) of BT and BNT and a new intermediate phase transition.

A Tightly Stretched Ultralong Supramolecular Multiporphyrin Array Propagated by Double-Strand Formation.

A shape-programmed linearity through supramolecular polymerization is demonstrated by a step-growth double-strand formation of a telechelic oligomeric porphyrin array in which two alternating pyridyl-porphyrin sequenced units are held together by self-complementary ligand-to-metal coordination. The stiff rod-like structure and sufficiently large binding constant of the double-strand unit considerably extended a supramolecular array in the one dimension, which produced a tightly stretched string with a length that exceeded several micrometers.

Concentration-dependent rhombitrihexagonal tiling patterns at the liquid/solid interface.

We report STM investigations on a linear oligophenyleneethylene (OPE)-based self-assembling Pd(ii) complex 1 that forms highly-ordered concentration dependent patterns on HOPG. At high concentration, 2D lamellar structures are observed whereas the dilution of the system below a critical concentration leads to the formation of visually attractive rhombitrihexagonal Archimedean tiling arrangements featuring three different kinds of polygons: triangles, hexagons and rhombi. The key participation of the Cl ligands attached to the Pd(ii) centre in multiple C-H···Cl interactions was demonstrated by comparing the patterns of 1 with those of an analogous non-metallic system 2.

Thermodynamic self-assembly of two-dimensional pi-conjugated metal-porphyrin covalent organic frameworks by "on-site" equilibrium polymerization.

Two-dimensional pi-conjugated metal-porphyrin covalent organic frameworks were produced in aqueous solution on an iodine-modified Au(111) surface by "on-site" azomethine coupling of Fe(III)-5,10,15,20-tetrakis(4-aminophenyl)porphyrin (FeTAPP) with terephthal dicarboxaldehyde and investigated in detail using in-situ scanning tunneling microscopy. Mixed covalent organic porphyrin frameworks consisting of FeTAPP and metal-free TAPP (H2TAPP) were prepared through simultaneous adsorption in a mixed solution as well as partial replacement of FeTAPP by H2TAPP in an as-prepared metal-porphyrin framework. In the mixed framework, the relative distribution of FeTAPP to H2TAPP was not random and revealed a preference for homo-connection rather than heteroconnection. The construction of substrate-supported, pi-conjugated covalent frameworks from multiple building blocks, including metal centers, will be of significant utility in the design of functional molecular nanoarchitectures.

Photocontrol over self-assembled nanostructures of π-π stacked dyes supported by the parallel conformer of diarylethene.

Diarylethenes (DAEs) have rarely been used in the design of photoresponsive supramolecular assemblies with a well-defined morphology transition owing to rather small structural changes upon photoisomerization. A supramolecular design based on the parallel conformation of DAEs enables the construction of photoresponsive dye assemblies that undergo remarkable nanomorphology transitions. The cooperative stacking of perylene bisimide (PBI) dyes was used to stabilize the parallel conformer of DAE through complementary hydrogen bonds. Atomic force microscopy, UV/Vis spectroscopy, and molecular modeling revealed that our DAE and PBI building blocks coassembled in nonpolar solvent to form well-defined helical nanofibers featuring J-type dimers of PBI dyes. Upon irradiating the coassembly solution with UV and visible light in turn, a reversible morphology change between nanofibers and nanoparticles was observed. This system involves the generation of a new self-assembly pathway by means of photocontrol.

Anion-driven structures of radially arranged anion receptor oligomers.

Radially arranged oligomers of π-conjugated acyclic anion receptors showed various anion-driven structures depending on the positions and numbers of the receptor units.

Ion-pair-based assemblies comprising pyrrole-pyrazole hybrids.

Modified 3,5-dipyrrolylpyrazole (DPP) derivatives in their protonated form produce planar [2+2]-type complexes with trifluoroacetate (TFA) ions. These complexes serve as constituent components of ion-pair-based assemblies. An essential strategy for the construction of dimension-controlled organized structures based on these [2+2]-type complexes is the introduction of aryl rings bearing long alkyl chains, which enables the formation of 2D patterns at interfaces, supramolecular gels, and mesophases.

Construction and characterization of molecular nonwoven fabrics consisting of cross-linked poly(γ-methyl-L-glutamate).

Molecular nonwoven fabrics in the form of ultrathin layer-by-layer (LbL) helical polymer films with covalent cross-linking were assembled on substrates by an alternate ester-amide exchange reaction between poly(γ-methyl L-glutamate) (PMLG) and cross-linking agent ethylene diamine or 4,4'-diamino azobenzene. The regular growth of helical monolayers without excessive adsorption and the formation of amide bonds were confirmed by ultraviolet-visible (UV-vis) spectrophotometry, quartz crystal microbalance (QCM), ellipsometry, and infrared reflection-absorption spectroscopy (IR-RAS) measurements. Nanostructures with high uniformity and ultrathin films with few defects formed by helical rod segments of PMLG were characterized by atomic force microscopy (AFM) and Kelvin probe force microscopy (KFM).

Electrochemical elucidation of structural changes in physical organo bicontinuous microemulsion gel systems.

The structural changes in a bicontinuous microemulsion gel system in a sol-gel state were elucidated via determination of the apparent diffusion coefficients, which were estimated electrochemically. The temperature dependence of D(app) in the micro oil phase or the saline phase revealed complementary hysteresis, which occurred as a result of formation of a gel network and subsequent mesoscopic phase separation.

In situ STM investigation of aromatic poly(azomethine) arrays constructed by "on-site" equilibrium polymerization.

Two-dimensional (2D) arrays of π-conjugated aromatic polymers produced by surface-selective Schiff base coupling reactions between an aromatic diamine and an aromatic dialdehyde were investigated in detail using in situ scanning tunneling microscopy. Surface-selective coupling was achieved for almost all diamine/dialdehyde combinations attempted, although several combinations did not proceed even in homogeneous aqueous alkaline solution. Most of the combinations of an aromatic diamine and a dialdehyde, except the combinations of 4,4'-azodianiline with mono/bithiophenedicarboxaldehyde, formed highly ordered π-conjugated polymer arrays on an iodine-modified Au(111) surface in aqueous solution at a suitable pH. The simplest polymer of the various combinations tested, obtained from the combination of 1,4-diaminobenzene with terephthaldicarboxaldehyde, gave a 2D array consisting of linearly connected benzene units. Poly(azomethine) adlayers caused a positive shift in the electrochemical potential of the butterfly shaped oxidative adsorption and reductive desorption of iodine. The acceleration of the reductive desorption of iodine suggests the existence of a weak interaction between the polymer layer and iodine. Not only the first polymer adlayers but also partially adsorbed secondary adlayers with "on-top" epitaxial behavior were frequently observed for all polymer systems. The alignment of the polymer chains in the adlayers possessed a certain regularity in terms of a regular interval between polymer chains because of repulsive interpolymer interactions.

Biosupramolecular nanowires from chlorophyll dyes with exceptional charge-transport properties.

Conductive tubes: Self-assembled nanotubes of a bacteriochlorophyll derivative are reminiscent of natural chlorosomal light-harvesting assemblies. After deposition on a substrate that consists of a non-conductive silicon oxide surface (see picture, brown) and contacting the chlorin nanowires to a conductive polymer (yellow), they show exceptional charge-transport properties.

Supramolecularly engineered perylene bisimide assemblies exhibiting thermal transition from columnar to multilamellar structures.

Perylene 3,4:9,10-tetracarboxylic acid bisimide (PBI) was functionalized with ditopic cyanuric acid to organize it into complex columnar architectures through the formation of hydrogen-bonded supermacrocycles (rosette) by complexing with ditopic melamines possessing solubilizing alkoxyphenyl substituents. The aggregation study in solution using UV-vis and NMR spectroscopies showed the formation of extended aggregates through hydrogen-bonding and π-π stacking interactions. The cylindrical fibrillar nanostructures were visualized by microscopic techniques (AFM, TEM), and the formation of lyotropic mesophase was confirmed by polarized optical microscopy and SEM. X-ray diffraction study revealed that a well-defined hexagonal columnar (Col(h)) structure was formed by solution-casting of fibrillar assemblies. All of these results are consistent with the formation of hydrogen-bonded PBI rosettes that spontaneously organize into the Col(h) structure. Upon heating the Col(h) structure in the bulk state, a structural transition to a highly ordered lamellar (Lam) structure was observed by variable-temperature X-ray diffraction, differential scanning calorimetry, and AFM studies. IR study showed that the rearrangement of the hydrogen-bonding motifs occurs during the structural transition. These results suggest that such a striking structural transition is aided by the reorganization in the lowest level of self-organization, i.e., the rearrangement of hydrogen-bonded motifs from rosette to linear tape. A remarkable increase in the transient photoconductivity was observed by the flash-photolysis time-resolved microwave conductivity (FP-TRMC) measurements upon converting the Col(h) structure to the Lam structure. Transient absorption spectroscopy revealed that electron transfer from electron-donating alkoxyphenyl groups of melamine components to electron-deficient PBI moieties takes place, resulting in a higher probability of charge carrier generation in the Lam structure compared to the Col(h) structure.

Chemical liquid deposition of aromatic poly(azomethine)s by spontaneous on-site polycondensation in aqueous solution.

Colored Schiff-base π-conjugated polymer thin films from different combinations of aromatic amines and aldehydes have been prepared. The polymer films spontaneously form under ambient conditions by simple immersion of graphite substrates in an aqueous solution containing the monomer units. Chemical liquid deposition is achieved by delicate control of solution pH, which allows surface selective polymerization and deposition but inhibits reaction in the aqueous phase.

Thermodynamically controlled self-assembly of covalent nanoarchitectures in aqueous solution.

The pursuit of methods for design and preparation of robust nanoarchitectonic systems with integrated functionality through bottom-up methodologies remains a driving force in molecular nanotechnology. Through the use of π-conjugated covalent bonds, we demonstrate a general substrate-mediated, soft solution methodology for the preparation of extended π-conjugated polymeric nanoarchitectures in low-dimensions. Based on thermodynamic control over equilibrium polymerization at the solid-liquid interface whereby aromatic building blocks spontaneously and selectively link, close-packed arrays composed of one-dimensional (1-D) aromatic polymers and two-dimensional (2-D) macromolecular frameworks have been prepared and characterized by in situ scanning tunneling microscopy. This methodology eliminates the necessity for severe conditions and sophisticated equipment common to most current fabrication techniques and imparts almost infinite possibilities for the preparation of robust materials with designer molecular architectures.

Columnar mesophases based on zinc chlorophyll derivatives functionalized with peripheral dendron wedges.

A chlorophyll derivative with a central zinc ion, a methoxy functionality at its 3(1)-position, and functionalized with a second-generation dendron (3,4-3,4,5)12G2-CH(2)OH at its 17(2)-position was synthesized starting from natural chlorophyll a (Chl a). This compound exhibits liquid crystalline (LC) behavior and its mesomorphic properties have been characterized by differential scanning calorimetry (DSC), polarisation optical microscopy (POM), powder X-ray diffraction (XRD), and scanning probe microscopy (SPM). A combination of powder XRD, high resolution scanning tunneling microscopy (STM), and atomic force microscopy (AFM) experiments revealed the formation of nano-segregated well-ordered columnar tubular superstructures consisting of about five molecules in the column stratum. These self-assembled columns are further self-organized into a two-dimensional oblique unit cell lattice. Semiconducting behavior of this compound has been studied by pulse-radiolysis time-resolved microwave conductivity (PR-TRMC) method and charge carrier mobility values of ∼10(-2) cm(2) V(-1) s(-1) are observed. Such organized columnar superstructures constructed from semisynthetic zinc chlorins are reminiscent of the tubular organization of the bacteriochlorophyll dyes in the light-harvesting chlorosomal antennae of green sulphur bacteria.

Photoreactivity of crystals of a rhodium dithionite complex with ethyltetramethylcyclopentadienyl ligands: crystal surface morphology changes and degradation.

A photoreactive rhodium dithionite complex [(RhCp(Et))(2)(µ-CH(2))(2)(µ-O(2)SSO(2))] (1(Et)) with Cp(Et) (η(5)-C(5)Me(4)Et) ligands was newly synthesized. Upon short-time irradiation with low intensity light, two kinds of stepwise surface morphology changes of the crystal 1(Et) were observed. Prolonged irradiation with high intensity light caused cracking and breaking down of the crystal.

Two-dimensional self-assembled structures of melamine and melem at the aqueous solution-Au(111) interface.

Self-assembled structures of melamine and the condensed melamine derivative melem were investigated at aqueous solution-Au(111) interfaces by cyclic voltammetry and in situ scanning tunneling microscopy (STM) observation. The adsorption/desorption behaviors of both molecules on Au(111) surfaces could be controlled by varying the electrochemical potential and solution concentration. In the negative potential region, self-assembled structures of melem and melamine were constructed by double hydrogen bonding systems between nitrogen atoms of triazine rings and amine groups. In addition, melem formed a closely packed structure at potentials of between -0.3 and -0.15 V or in solutions at higher concentrations.