Functionalized graphene oxide tablets for sample preparation of drugs in biological fluids: Extraction of ritonavir, a HIV protease inhibitor, from human saliva and plasma using LC-MS/MS.

In this work, graphene oxide-based tablets (GO-Tabs) were prepared by applying a thin layer of functionalized GO on a polyethylene substrate. The GO was functionalized with amine groups (-NH2 ) by poly(ethylene glycol)bis(3-aminopropyl) terminated (GO-NH2 -PEG-NH2 ). The functionalized GO-Tabs were used for the extraction of ritonavir (RTV) in human saliva samples. RTV in plasma and saliva samples was analyzed using LC-MS/MS. Gradient LC system with MS/MS in the positive-ion mode [electrospray ionization (ESI+)] was used. The transitions m/z 721 → 269.0 and m/z 614 → 421 were used for RTV and the internal standard indinavir, respectively. This study determined the human immunodeficiency virus protease inhibitor RTV in human saliva samples using functionalized GO-Tab and LC-MS/MS, and the method was validated. The standard calibration curve for plasma and saliva samples was constructed from 5.0 to 2000 nmol L-1 . The limit of detection was 0.1 nmol L-1 , and the limit of quantification was 5.0 nmol L-1 in both plasma and saliva matrices. The intra- and inter-assay precision values were found to be between 1.5 and 5.8%, and the accuracy values ranged from 88.0 to 108% utilizing saliva and plasma samples. The extraction recovery was more than 80%, and the presented functionalized GO-Tabs could be reused for more than 10 extractions without deterioration in recovery.

Visible light photocatalytic degradation of polypropylene microplastics in a continuous water flow system.

Microplastic pollution of water and ecosystem is attracting continued attention worldwide. Due to their small sizes (≤5 mm) microplastic particles can be discharged to the environment from treated wastewater effluents. As microplastics have polluted most of our aquatic ecosystems, often finding its way into drinking water, there is urgent need to find new solutions for tackling the menace of microplastic pollution. In this work, sustainable green photocatalytic removal of microplastics from water activated by visible light is proposed as a tool for the removal of microplastics from water. We propose a novel strategy for the elimination of microplastics using glass fiber substrates to trap low density microplastic particles such as polypropylene (PP) which in parallel support the photocatalyst material. Photocatalytic degradation of PP microplastics spherical particles suspended in water by visible light irradiation of zinc oxide nanorods (ZnO NRs) immobilized onto glass fibers substrates in a flow through system is demonstrated. Upon irradiation of PP microplastics for two weeks under visible light reduced led to a reduction of the average particle volume by 65%. The major photodegradation by-products were identified using GC/MS and found to be molecules that are considered to be mostly nontoxic in the literature.

Key activity descriptors of nickel-iron oxygen evolution electrocatalysts in the presence of alkali metal cations.

Efficient oxygen evolution reaction (OER) electrocatalysts are pivotal for sustainable fuel production, where the Ni-Fe oxyhydroxide (OOH) is among the most active catalysts for alkaline OER. Electrolyte alkali metal cations have been shown to modify the activity and reaction intermediates, however, the exact mechanism is at question due to unexplained deviations from the cation size trend. Our X-ray absorption spectroelectrochemical results show that bigger cations shift the Ni2+/(3+δ)+ redox peak and OER activity to lower potentials (however, with typical discrepancies), following the order CsOH > NaOH ≈ KOH > RbOH > LiOH. Here, we find that the OER activity follows the variations in electrolyte pH rather than a specific cation, which accounts for differences both in basicity of the alkali hydroxides and other contributing anomalies. Our density functional theory-derived reactivity descriptors confirm that cations impose negligible effect on the Lewis acidity of Ni, Fe, and O lattice sites, thus strengthening the conclusions of an indirect pH effect.

Surface modified of polyacrylonitrile nanofibers by TiO2/MWCNT for photodegradation of organic dyes and pharmaceutical drugs under visible light irradiation.

This work describes the fabrication of two composite nanofibers systems containing polyacrylonitrile polymer (PAN), Multiwall carbon nanotubes (MWCNT) and Titania (TiO2) nanoparticles. Photodegradation experiments were performed to study the effect of various parameters including pH, catalyst dose, pollutant concentration and reaction time for three model compounds, methylene blue (MB), indigo carmine (IC), and ibuprofen (IBU) under visible light. Morphology and structure of the modified composite nanofibers were characterized by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Thermogravimetric analysis (TGA), Photoluminescence (PL) spectroscopy, Raman spectra, and X-ray Photoelectron Spectra (XPS) analyses. The photocatalytic performance was achieved in a rather short time visible light (<30 min) and under low power intensity (125 W) compared to earlier reports. Kinetics data fitted well using pseudo-first order model to describe the mechanism of photocatalytic degradation processes. The stability and flexibility of the fabricated composite nanofibers allow their application in a continuous flow system and their re-use after several cycles.

Polyacrylonitrile / graphene oxide nanofibers for packed sorbent microextraction of drugs and their metabolites from human plasma samples.

In the present study, a new graphene based nanofibers material (Polyacrylonitrile/Graphene Oxide (PAN/GO)) was used for microextraction by packed sorbent (MEPS). The PAN/GO nanofiber was synthesized using the electrospinning technique. MEPS online with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was utilized for the extraction and determination of two local anesthetic drugs (lidocaine, prilocaine) and their major metabolites (2,6-xylidine, o-toluidine) in human plasma samples. Parameters affecting the extraction efficiency were investigated and optimized (including sample pH, washing solution and elution solution). The validation of the method was based on FDA (Food and Drug Administration) guidelines for bioanalytical methods. The calibration curve ranged from 2.00 to 2000 nmol/L for lidocaine and prilocaine, and from 10.0 to 2000 nmol/L for 2,6-xylidine and o-toluidine. The coefficient of determination (R2) values were 0.996, 0.995, 0.995, 0.996 (n = 3) for lidocaine, prilocaine, 2,6-xylidine and o-toluidine, respectively. The extraction recovery was 93.0% for lidocaine, 96.0% for prilocaine, 68.0% for 2,6-xylidine and 69.0% for o-toluidine. The limits of detection (LODs) were 0.25, 0.50, 2.50, 1.25 nmol/L for lidocaine, prilocaine, 2,6-xylidine and o-toluidine, respectively. The lower limits of quantification (LLOQs) were 2.0 nmol/L for lidocaine and prilocaine, and 10 nmol/L for 2,6-xylidine and o-toluidine, respectively. The accuracy values for the quality control (QC) samples were in the range of 91.0-111% for lidocaine, 92.0-118% for prilocaine, 84.0-98.0% for 2,6-xylidine and 82.0-90.0% for o-toluidine. The inter-day precisions for QC samples ranged from 7.0% to 11.8% for lidocaine, from 8.6% to 11.7% for prilocaine, from 8.0% to 10.0% for 2,6-xylidine and from 8.0% to 9.0% for o-toluidine. The matrix effect values were in the range of -2.3% to -8.6% for lidocaine, -2.7% to -10.2% for prilocaine, 4.8%-5.2% for 2, 6-xylidine and -8.2% to 9.4% for o-toluidine.

Graphene Oxide Tablets for Sample Preparation of Drugs in Biological Fluids: Determination of Omeprazole in Human Saliva for Liquid Chromatography Tandem Mass Spectrometry.

In this study, a novel sort of sample preparation sorbent was developed, by preparing thin layer graphene oxide tablets (GO-Tabs) utilizing a mixture of graphene oxide and polyethylene glycol on a polyethylene substrate. The GO-Tabs were used for extraction and concentration of omeprazole (OME) in human saliva samples. The determination of OME was carried out using liquid chromatography-tandem mass spectrometry (LC⁻MS/MS) under gradient LC conditions and in the positive ion mode (ESI+) with mass transitions of m/z 346.3→198.0 for OME and m/z 369.98→252.0 for the internal standard. Standard calibration for the saliva samples was in the range of 2.0⁻2000 nmol L-1. Limits of detection and quantification were 0.05 and 2.0 nmol L-1, respectively. Method validation showed good method accuracy and precision; the inter-day precision values ranged from 5.7 to 8.3 (%RSD), and the accuracy of determinations varied from -11.8% to 13.3% (% deviation from nominal values). The extraction recovery was 60%, and GO-Tabs could be re-used for more than ten extractions without deterioration in recovery. In this study, the determination of OME in real human saliva samples using GO-Tab extraction was validated.

CT Scanning and MATLAB Calculations for Preservation of Coptic Mural Paintings in Historic Egyptian Monasteries.

Investigations of Coptic mural paintings in historic churches and monasteries demand a deep understanding of the micro structure of the mural painting layers. The main objective of the present study is to study the efficiency of new avenues of computed X-ray tomography (CT Scan) and MATLAB in the analysis of Coptic mural paintings, either in the form of images or videos made to collect information about the physical characteristics of the material structure of the layers of mural paintings. These advanced techniques have been used in the investigation of samples of Coptic mural paintings dating back to the V-VIII century A.D, which have been collected from several locations in the Coptic monasteries in Upper Egypt. The application of CT-scanning is a powerful non-destructive tool for imaging and investigation which can be applied to the preservation of monuments made from many different materials. The second stage of research will be to characterize the materials through analytical techniques including XRD, XRF, EDX and FTIR to confirm the findings of CT scanning and to provide additional information concerning the materials used and their deterioration processes. This paper presents the results of the first pilot study in which CT scan and MATLAB have been utilized in combination for the non-destructive evaluation and investigation of Coptic mural paintings in Upper Egypt. The examinations have been carried out on mural painting samples from three important Coptic monasteries in Upper Egypt: the Qubbat Al Hawa Monastery in Aswan, the Saint Simeon Monastery in Aswan and the Saint Matthew the Potter Monastery in Luxor. This multi-stranded investigation has provided us with important information about the physical structure of the paintings, grains dimensions, grain texture, pore media characterization which include the micro porosity, BET and TPV, surface rendering, and calculation of the points in the surface through calculations completed using MATLAB. CT scanning assisted in the investigation and analyses of image surface details, and helped to visualize hidden micro structures that would otherwise be inaccessible due to over painting.

Photodegradation of Ibuprofen, Cetirizine, and Naproxen by PAN-MWCNT/TiO2-NH2 nanofiber membrane under UV light irradiation.

BACKGROUND: In this study, the photodegradation of three pharmaceuticals, namely Ibuprofen (IBP), Naproxen (NPX), and Cetirizine (CIZ) in aqueous media was investigated under UV irradiation. The photocatalyst used in this work consists of surface functionalized titanium dioxide (TiO2-NH2) nanoparticles grafted into Polyacrylonitrile (PAN)/multi-walled carbon nanotube composite nanofibers. Surface modification of the fabricated composite nanofibers was illustrated using XRD, FTIR, and SEM analyses. RESULTS: Sets of experiments were performed to study the effect of pharmaceuticals initial concentration (5-50 mg/L), solution pH (2-9), and irradiation time on the degradation efficiency. The results demonstrated that more than 99% degradation efficiency was obtained for IBP, CIZ, and NPX within 120, 40, and 25 min, respectively. CONCLUSIONS: Comparatively, the photocatalytic degradation of pharmaceuticals using PAN-CNT/TiO2-NH2 composite nanofibers was much more efficient than with PAN/TiO2-NH2 composite nanofibers.

Oxidative stress and dermal toxicity of iron oxide nanoparticles in vitro.

A number of commercially available metal/metal oxide nanoparticles (NPs) such as superparamagnetic iron oxide (SPION) are utilized by the medical field for a wide variety of applications. These NPs may able to induce dermal toxicity via their physical nature and reactive surface properties. We hypothesize that SPION may be toxic to skin via the ability of particles to be internalized and thereby initiate oxidative stress, inducing redox-sensitive transcription factors affecting/leading to inflammation. Due to the skin's susceptibility to UV radiation, it is also of importance to address the combined effect of UVB and NPs co-exposure. To test this hypothesis, the effects of dextran-coated SPION of different sizes (15-50 nm) and manufacturers (MicroMod, Rostock-Warnemunde, Germany and KTH-Royal Institute of Technology, Stockholm, Sweden) were evaluated in two cell lines: normal human epidermal keratinocytes (HEK) and murine epidermal cells (JB6 P(+)). HEK cells exposed to 20 nm (KTH and MicroMod) had a decrease in viability, while the 15 and 50 nm particles were not cytotoxic. HEK cells were also capable of internalizing the KTH particles (15 and 20 nm) but not the MicroMod SPION (20 and 50 nm). IL-8 and IL-6 were also elevated in HEK cells following exposure to SPION. Exposure of JB6 P(+) cells to all SPIONs evaluated resulted in activation of AP-1. Exposure to SPION alone was not sufficient to induce NF-κB activation; however, co-exposure with UVB resulted in significant NF-κB induction in cells exposed to 15 and 20 nm KTH SPION and 50 nm MicroMod particles. Pre-exposure of JB6 P(+) cells to UVB followed by NPs induced a significant depletion of glutathione, release of cytokines, and cell damage as assessed by release of lactate dehydrogenase. Altogether, these data indicate that co-exposure to UVB and SPIONs was associated with induction of oxidative stress and release of inflammatory mediators. These results verify the need to thoroughly evaluate the adverse effects of UVB when evaluating dermal toxicity of engineered NPs on skin.

Microsomal glutathione transferase 1 protects against toxicity induced by silica nanoparticles but not by zinc oxide nanoparticles.

Microsomal glutathione transferase 1 (MGST1) is an antioxidant enzyme located predominantly in the mitochondrial outer membrane and endoplasmic reticulum and has been shown to protect cells from lipid peroxidation induced by a variety of cytostatic drugs and pro-oxidant stimuli. We hypothesized that MGST1 may also protect against nanomaterial-induced cytotoxicity through a specific effect on lipid peroxidation. We evaluated the induction of cytotoxicity and oxidative stress by TiO(2), CeO(2), SiO(2), and ZnO in the human MCF-7 cell line with or without overexpression of MGST1. SiO(2) and ZnO nanoparticles caused dose- and time-dependent toxicity, whereas no obvious cytotoxic effects were induced by nanoparticles of TiO(2) and CeO(2). We also noted pronounced cytotoxicity for three out of four additional SiO(2) nanoparticles tested. Overexpression of MGST1 reversed the cytotoxicity of the main SiO(2) nanoparticles tested and for one of the supplementary SiO(2) nanoparticles but did not protect cells against ZnO-induced cytotoxic effects. The data point toward a role of lipid peroxidation in SiO(2) nanoparticle-induced cell death. For ZnO nanoparticles, rapid dissolution was observed, and the subsequent interaction of Zn(2+) with cellular targets is likely to contribute to the cytotoxic effects. A direct inhibition of MGST1 by Zn(2+) could provide a possible explanation for the lack of protection against ZnO nanoparticles in this model. Our data also showed that SiO(2) nanoparticle-induced cytotoxicity is mitigated in the presence of serum, potentially through masking of reactive surface groups by serum proteins, whereas ZnO nanoparticles were cytotoxic both in the presence and in the absence of serum.

Sorption of palladium(II), rhodium(III), and platinum(IV) on Fe(3)O(4) nanoparticles.

The adsorption of palladium(II), rhodium(III), and platinum(IV) from diluted hydrochloric acid solutions onto Fe(3)O(4) nanoparticles has been investigated. The parameters studied include the contact time and the concentrations of metals and other solutes such as H(+) and chloride. The equilibrium time was reached in less than 20 min for all metals. The maximum loading capacity of Fe(3)O(4) nanoparticles for Pd(II), Rh(III), and Pt(IV) was determined to be 0.103, 0.149, and 0.068 mmol g(-1), respectively. A sorption mechanism for Pd(II), Rh(III), and Pt(IV) has been proposed and their conditional adsorption equilibrium constants have been determined to be logK=1.72, 1.69, and 1.84, respectively. Different compositions of eluting solution were tested for the recovery of Pt(IV), Pd(II), and Rh(III) from Fe(3)O(4) nanoparticles. It was found that 0.5 mol L(-1) HNO(3) can elute all of the metal ions simultaneously, while 1 mol L(-1) NaHSO(3) was an effective eluting solution for Rh(III), and 0.5 mol L(-1) NaClO(4) for Pt(IV). In competitive adsorption, the nanoparticles showed stronger affinity for Rh(III) than for Pd(II) and Pt(IV).

Fe3O4 and gamma-Fe2O3 nanoparticles for the adsorption of Co2+ from aqueous solution.

The adsorption of Co2+ ions from nitrate solutions using iron oxide nanoparticles of magnetite (Fe3O4) and maghemite (gamma-Fe2O3) has been studied. The adsorption of Co2+ ions on the surface of the particles was investigated under different conditions of oxide content, contact time, solution pH, and initial Co2+ ion concentration. It has been found that the equilibrium can be attained in less than 5 min. The maximum loading capacity of Fe3O4 and gamma-Fe2O3 nanoparticles is 5.8 x 10(-5) and 3.7 x 10(-5) mol m(-2), respectively, which are much higher than the previously studied, iron oxides and conventional ion exchange resins. Co2+ ions were also recovered by dilute nitric acid from the loaded gamma-Fe2O3 and Fe3O4 with an efficiency of 86 and 30%, respectively. That has been explained by the different mechanisms by including both the surface and structural loadings of Co2+ ions. The surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles has been found to have the same mechanism of ion exchange reaction between Co2+ in the solution and proton bonded on the particle surface. The conditional equilibrium constants of surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles have been determined to be log K=-3.3+/-0.3 and -3.1+/-0.2, respectively. The structural loading of Co2+ ions into Fe3O4 lattice has been found to be the ion exchange reaction between Co2+ and Fe2+ while that into gamma-Fe2O3 lattice to fill its vacancy. The effect of temperature on the adsorption of Co2+ was also investigated, and the value of enthalpy change was determined to be 19 kJ mol(-1).